; V1.10R0.0 Evaluation version, First Release		04/15/94
;=============================================================================

BOARD
  ID="ACR1B11"
  NAME="M5"
  MFR="ACER"
  CATEGORY="SYS"
  SLOT=EMB(0)
  AMPERAGE=2000
  READID=YES
  IOCHECK = INVALID
  DISABLE = UNSUPPORTED
  COMMENTS="M5 Configuration File V1.10R0.0"
  HELP="M5\n\n
;	Key features of the system are as follows:\n\n
;	* 486SX/33, DX/33, DX2/50, DX2/66, DX/50, P24T CPU ChipUp, Pentium 60/66 BoardUp\n\n
;	* 64KB(486), 128KB, 256KB, 512KB(Pentium), 1024KB second level cache\n\n
;	* 8 32-bits EISA slots\n\n
;	* 2 VL-Bus slots which support 32 bit VESA standard add on cards\n\n
;	* Maximum 256MB DRAM on system board\n\n
;	* 128K bytes FLASH ROM(System BIOS and SCSI driver)\n\n
;	* 2 Serial, 1 Parallel, 1 FDC, 1 IDE and 1 SCSI HDD interface\n\n
	* 1 PS/2 compatible keyboard and 1 mouse interface\n\n"

SYSTEM
  NONVOLATILE = 8243                    ;8K bytes
  AMPERAGE = 16000
  SLOT(1) = EISA(1)     LENGTH = 341    SKIRT = NO
  SLOT(2) = EISA(2)     LENGTH = 341    SKIRT = NO
  SLOT(3) = EISA(3)     LENGTH = 341    SKIRT = NO
  SLOT(4) = EISA(4)     LENGTH = 341    SKIRT = NO
  SLOT(5) = EISA(5)     LENGTH = 341    SKIRT = NO

SOFTWARE(1)="Setup Screen RAM BIOS setting:"

;MEMTYPE change from SYS to OTH to avoid NT hange up. Jeff 12/12/91

GROUP = "System Memory Functions"
  FUNCTION = "Base System Memory"
    TYPE = "MEM"
    CHOICE = "640K Base Memory "
    COMBINE
	MEMORY=640K
	ADDRESS=0
	WRITABLE=YES
	MEMTYPE=sys
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
    CHOICE = "639K Base Memory "
    COMBINE
	MEMORY=639K
	ADDRESS=0
	WRITABLE=YES
	MEMTYPE=sys
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "4   -  16MB Extended Memory"
    TYPE = "MEM"
    CHOICE = "4MB Ext Memory"
    COMBINE
      MEMORY=3M
	ADDRESS=1M
	MEMTYPE=sys
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
    CHOICE = "8MB Ext Memory"
    COMBINE
      MEMORY=7M
	ADDRESS=1M
	MEMTYPE=sys
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
    CHOICE = "12MB Ext Memory"
    COMBINE
      MEMORY=11M
	ADDRESS=1M
	MEMTYPE=sys
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
    CHOICE = "16MB Ext Memory with 15-16MB System used"
    COMBINE
      MEMORY=15M
	ADDRESS=1M
	MEMTYPE=sys
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
    CHOICE = "16MB Ext Memory with 15-16MB Add-on card used(Pentium used only)" 
    COMBINE
      MEMORY=14M
	ADDRESS=1M
	MEMTYPE=sys
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "16  -  64MB Extended Memory"
    TYPE = "MEM"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n"
    CHOICE = "Ctrl-R to add the Memory"
    COMBINE
      MEMORY=0M  - 48M STEP=4M
	ADDRESS=16M
	MEMTYPE=sys
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "64  - 128MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n"
    CHOICE = "Ctrl-R to add the Memory"
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=64M
	MEMTYPE=sys
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "128 - 192MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n"
    CHOICE = "Ctrl-R to add the Memory"
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=128M
	MEMTYPE=sys
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "192 - 256MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n"
    CHOICE = "Ctrl-R to add the Memory"
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=192M
	MEMTYPE=sys
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "256 - 320MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n"
    CHOICE = "Ctrl-R to add the Memory"
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=256M
	MEMTYPE=sys
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "320 - 384MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n"
    CHOICE = "Ctrl-R to add the Memory"
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=320M
	MEMTYPE=sys
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "384 - 448MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n"
    CHOICE = "Ctrl-R to add the Memory"
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=384M
	MEMTYPE=sys
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "448 - 512MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n"
    CHOICE = "Ctrl-R to add the Memory"
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=448M
	MEMTYPE=sys
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
ENDGROUP
;======================================================================================
; MEMTYPE change from SYS to OTH to avoid NT hange up. Jeff 12/12/91

GROUP = "PCI Devices IRQ assignment"
FUNCTION = "On board 7870 SCSI controller"
  TYPE     = "OTH, PCI"
  COMMENTS = "On board 7870 IRQ assignment"
  CONNECTION = "On board 7870 IRQ assignment"

  CHOICE = "Disabled"
	DISABLE = YES
  CHOICE   = "IRQ 3"
	DISABLE = NO
	FREE
	IRQ = 3
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 4"
	DISABLE = NO
	FREE
	IRQ = 4
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 5"
	DISABLE = NO
	FREE
	IRQ = 5
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 7"
	DISABLE = NO
	FREE
	IRQ = 7
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 9"
	DISABLE = NO
	FREE
	IRQ = 9
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 10"
	DISABLE = NO
	FREE
	IRQ = 10
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 11"
	DISABLE = NO
	FREE
	IRQ = 11
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 14"
	DISABLE = NO
	FREE
	IRQ = 14
	    SHARE   = NO
	    TRIGGER = LEVEL

FUNCTION = "PCI slot 1"
  TYPE     = "OTH, PCI"
  COMMENTS = "PCI slot 1 IRQ assignment"
  CONNECTION = "PCI slot 1 IRQ assignment"

  CHOICE = "Disabled"
	DISABLE = YES
  CHOICE   = "IRQ 3"
	DISABLE = NO
	FREE
	IRQ = 3
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 4"
	DISABLE = NO
	FREE
	IRQ = 4
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 5"
	DISABLE = NO
	FREE
	IRQ = 5
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 7"
	DISABLE = NO
	FREE
	IRQ = 7
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 9"
	DISABLE = NO
	FREE
	IRQ = 9
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 10"
	DISABLE = NO
	FREE
	IRQ = 10
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 11"
	DISABLE = NO
	FREE
	IRQ = 11
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 14"
	DISABLE = NO
	FREE
	IRQ = 14
	    SHARE   = NO
	    TRIGGER = LEVEL

FUNCTION = "PCI slot 2"
  TYPE     = "OTH, PCI"
  COMMENTS = "PCI slot 2 IRQ assignment"
  CONNECTION = "PCI slot 2 IRQ assignment"

  CHOICE = "Disabled"
	DISABLE = YES
  CHOICE   = "IRQ 3"
	DISABLE = NO
	FREE
	IRQ = 3
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 4"
	DISABLE = NO
	FREE
	IRQ = 4
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 5"
	DISABLE = NO
	FREE
	IRQ = 5
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 7"
	DISABLE = NO
	FREE
	IRQ = 7
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 9"
	DISABLE = NO
	FREE
	IRQ = 9
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 10"
	DISABLE = NO
	FREE
	IRQ = 10
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 11"
	DISABLE = NO
	FREE
	IRQ = 11
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 14"
	DISABLE = NO
	FREE
	IRQ = 14
	    SHARE   = NO
	    TRIGGER = LEVEL

FUNCTION = "PCI slot 3"
  TYPE     = "OTH, PCI"
  COMMENTS = "PCI slot 3 IRQ assignment"
  CONNECTION = "PCI slot 3 IRQ assignment"

  CHOICE = "Disabled"
	DISABLE = YES
  CHOICE   = "IRQ 3"
	DISABLE = NO
	FREE
	IRQ = 3
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 4"
	DISABLE = NO
	FREE
	IRQ = 4
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 5"
	DISABLE = NO
	FREE
	IRQ = 5
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 7"
	DISABLE = NO
	FREE
	IRQ = 7
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 9"
	DISABLE = NO
	FREE
	IRQ = 9
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 10"
	DISABLE = NO
	FREE
	IRQ = 10
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 11"
	DISABLE = NO
	FREE
	IRQ = 11
	    SHARE   = NO
	    TRIGGER = LEVEL
  CHOICE   = "IRQ 14"
	DISABLE = NO
	FREE
	IRQ = 14
	    SHARE   = NO
	    TRIGGER = LEVEL
ENDGROUP

FUNCTION = "System BIOS type"

  CHOICE = "E, F Segment System used"
    LINK
     MEMORY=128K
     ADDRESS=0E0000H
     MEMTYPE=OTH
     WRITABLE=NO
     SIZE=DWORD
     DECODE=32
     CACHE=YES
     INIT=SOFTWARE(1) "\tRAM BIOS Enable"

;======================================================================================
GROUP = "Peripheral Device Status"
FUNCTION = "Mouse port"
  TYPE     = "PTR,8042"
  COMMENTS = "The mouse port is a PS/2 compatible port."
  CONNECTION = "Standard PS/2 style DIN connector"

  CHOICE   = "Enabled"
	DISABLE = NO
	FREE
	IRQ = 12
	    SHARE   = NO
	    TRIGGER = EDGE
  CHOICE = "Disabled"
	DISABLE = YES

FUNCTION = "Keyboard port"
	TYPE = "KEY,8042"
	COMMENTS = "PS/2 compatible keyboard"
	CONNECTION = "Standard PS/2 style DIN connector"
	HELP    = "The installed keyboard must be set to send 'PS/2' or
	'AT' style key codes."

	CHOICE = "Enabled"
		DISABLE = NO
		FREE
		IRQ = 1
		   SHARE = NO
		   TRIGGER = EDGE

FUNCTION = "Floppy Disk Controller"
  TYPE = "MSD,FPYCTL,FIFO"
  COMMENTS = "This controller is a superset of the typical ISA floppy disk
	      controller.  It can support a maximum of two floppy drives. Any
	      combination of 5 1/4 inch(including 360K to 2.88M) or 3 1/2 
	      inch drives can be used."

  CHOICE = "Enabled"
      FREE
	IRQ = 6
	  SHARE = NO
	  TRIGGER = EDGE
	PORT = 03f0h - 03f5h
	  SIZE = BYTE
	PORT = 03f6h - 03f7h
	  SIZE = BYTE
	  SHARE="ATdIsk"

	DMA = 2
	  SIZE = BYTE

  CHOICE = "Disabled"
      DISABLE = YES

FUNCTION = "IDE HDD Interface"
  TYPE = "MSD,IDE"
  COMMENTS = "The IDE interface is software compatible with a standard AT bus
	      hard disk controller."

  CHOICE = "Enabled"
      FREE
      IRQ = 14
	SHARE = NO
	TRIGGER = EDGE
      PORT = 01f0h - 01f7h
	SIZE = BYTE
      PORT = 03f6h - 03f7h
	  SIZE = BYTE
	  SHARE="ATdIsk"

  CHOICE = "Disabled"
      DISABLE = YES

FUNCTION = "Parallel port"
  TYPE = "PAR"
  COMMENTS = "The parallel port has a standard 25 pin connector (AT style)
	and is a superset of a typical ISA parallel port."
  HELP = "The settings in BIOS SETUP must match your choice."

  CHOICE = "Enabled as LPT1 (3BCh)"
      SUBTYPE = "LPT1"
      FREE
	IRQ = 7
	  SHARE = NO
	  TRIGGER = EDGE

	PORT = 03bch - 03bfh
	  SIZE = BYTE

  CHOICE = "Enabled as LPT2 (378h)"
      SUBTYPE = "LPT2"
      FREE
	IRQ = 7
	  SHARE = NO
	  TRIGGER = EDGE

	PORT = 0378h - 037fh
	  SIZE = BYTE

  CHOICE = "Enabled as LPT3 (278h)"
      SUBTYPE = "LPT3"
      FREE
	IRQ = 7
	  SHARE = NO
	  TRIGGER = EDGE

	PORT = 0278h - 027fh
	  SIZE = BYTE

  CHOICE = "Disabled"
      DISABLE = YES

FUNCTION = "Serial port 1 (9 pins)"
  TYPE = "COM,ASY"
  COMMENTS = "This serial port has a standard 9 pin connector."
  HELP = "The settings in BIOS SETUP must match your choice."

  CHOICE = "Disabled"
      DISABLE = YES

  CHOICE = "Enabled as Serial 2 (2F8h)"
      SUBTYPE = "COM2"
      FREE
	IRQ = 3
	  SHARE = NO
	  TRIGGER = EDGE
	PORT = 02F8h - 02FFh
	  SIZE = BYTE

  CHOICE = "Enabled as Serial 4 (2E8h)"
      SUBTYPE = "COM4"
      FREE
	IRQ = 3
	  SHARE = NO
	  TRIGGER = EDGE
	PORT = 02E8h - 02EFh
	  SIZE = BYTE

  CHOICE = "Enabled as Serial 1 (3F8h)"
	SUBTYPE = "COM1"
	FREE
	IRQ = 4
	  SHARE = NO
	  TRIGGER = EDGE
	PORT = 03F8h - 03FFh
	  SIZE = BYTE

  CHOICE = "Enabled as Serial 3 (3E8h)"
	SUBTYPE = "COM3"
	FREE
	IRQ = 4
	  SHARE = NO
	  TRIGGER = EDGE
	PORT = 03E8h - 03EFh
	  SIZE = BYTE

FUNCTION = "Serial port 2 (25 pins)"
  TYPE = "COM,ASY"
  COMMENTS = "This serial port has a standard 25 pin connector."
  HELP = "The settings in BIOS SETUP must match your choice."

  CHOICE = "Disabled"
      DISABLE = YES

  CHOICE = "Enabled as Serial 1 (3F8h)"
	SUBTYPE = "COM1"
	FREE
	IRQ = 4
	  SHARE = NO
	  TRIGGER = EDGE
	PORT = 03F8h - 03FFh
	  SIZE = BYTE

  CHOICE = "Enabled as Serial 3 (3E8h)"
	SUBTYPE = "COM3"
	FREE
	IRQ = 4
	  SHARE = NO
	  TRIGGER = EDGE
	PORT = 03E8h - 03EFh
	  SIZE = BYTE

  CHOICE = "Enabled as Serial 2 (2F8h)"
      SUBTYPE = "COM2"
      FREE
	IRQ = 3
	  SHARE = NO
	  TRIGGER = EDGE
	PORT = 02F8h - 02FFh
	  SIZE = BYTE

  CHOICE = "Enabled as Serial 4 (2E8h)"
      SUBTYPE = "COM4"
      FREE
	IRQ = 3
	  SHARE = NO
	  TRIGGER = EDGE
	PORT = 02E8h - 02EFh
	  SIZE = BYTE
ENDGROUP

;begin ****************** Unchangable Setting ******************************
GROUP = "System Setting"
  FUNCTION = "Special System Ports"
    choice="Enable"
      link
	PORT=0800H-08FFH        ;UNKNOW
	SHARE=NO
	SIZE=BYTE

	PORT=0C00H              ;
	SHARE=NO
	SIZE=BYTE

	PORT=0C02H-0C07H        ;
	SHARE=NO
	SIZE=BYTE
		 
	PORT=0C12H-0C13H
	SHARE=NO
	SIZE=BYTE

	PORT=0C30H-0C4FH        ;0C40 COULD BE UNUSED
	SHARE=NO
	SIZE=BYTE

	PORT=0CE8H-0CFFH
	SHARE=NO
	SIZE=BYTE

	PORT=0CC0H-0CD6H        ; for Pentium used
	SHARE=NO
	SIZE=BYTE

	PORT=0C6AH              ; for MP used
	SHARE=NO
	SIZE=BYTE

	PORT=0C68H
	SHARE=NO
	SIZE=BYTE

	PORT=0FC6AH
	SHARE=NO
	SIZE=BYTE

	PORT=0FC68H
	SHARE=NO
	SIZE=BYTE
		 
	PORT=0C70H
	SHARE=NO
	SIZE=BYTE

  FUNCTION = "EISA Reserved Devices"
    CHOICE="Enable"
      link
	PORT=0H-0FFH
	SHARE=NO
	SIZE=BYTE

	PORT=0400H-04FFH
	SHARE=NO
	SIZE=BYTE

	PORT=0C80H-0C84H
	SHARE=NO
	SIZE=BYTE
ENDGROUP
; end ******************* Unchangeable Setting *******************************
;-------------------------------------------------------------------------
; Modify record:
;
; V1.00 04/26/91 Pin Chiang
; V1.11 12/12/91 Jeff Lin
;               1. add function "Mouse Port", "Keyborad Port",
;                       "Floppy Disk Controller","IDE HDD interface"
;               2. Change function "System BIOS" MEMTYPE statement from SYS
;                       to OTH - to fix the bug that NT can not be executed.
; V1.12 03/02/92 Jeff Lin.
;               1. Modify commemt to cover 50 MHz processor board. (33 and
;                       50 use same EISA id )
; V1.20 11/11/92 Pin.
;               1. Remove IRQ0 for add-on card use IRQ0,share(polling)
;               2. Configure memory 64-256 MB
;               3. Add IOCHECK & DISABLE for NT
;               4. Remove system board IRQ resource to prevent conflict
;               5. Add System Board skirt=no
;               6. Mouse (IRQ 12) may be disable
; V1.21 03/10/93 Pin.
;               1. Support system/add-on used option
;               2. Base memory set to 639K for matching int12(Window NT)
;               3. MEMTYPE change from SYS to OTH to avoid NT hange up.
;-------------------------------------------------------------------------