; ==============================================
; AcerFrame Pentium System              06/10/93
; 1. Configuration file version V1.00  07/16/93
; 2. Configuration file version V1.01  08/25/93
; English version
; ==============================================
BOARD
  ID="ACR32A1"
  NAME="AcerAltos 17000 PENTIUM SYSTEM-1"
  MFR="ACER"
  CATEGORY="SYS"
  SLOT=EMB(0)
  AMPERAGE=11000
  READID=YES
  IOCHECK = INVALID
  DISABLE = UNSUPPORTED
  COMMENTS="AcerAltos 17000 Pentium system configuration file V1.01"
  HELP="Some of the key features of the ACER EISA system board are as follows:\n\n
	* Pentium CPU\n\n
	* 128K bytes second level cache\n\n
	* 6 64-bits S bus slots occupy I/O space CXXXh-FXXXh\n\n
	* 8 32-bits EISA slots\n\n
	* 2 16-bits ISA slots\n\n
	* Up to 256M bytes memory on board\n\n
	* 64K bytes ROM BIOS/128K RAM BIOS\n\n
	* 2 Serial, 1 Parallel, 1 FDC, 1 IDE HDD interface on board.
	* PS/2-compatible keyboard and mouse on board"

SYSTEM
  NONVOLATILE = 8192                    ;8K bytes
  AMPERAGE = 65000
  SLOT(1) = ISA16(1)  LENGTH = 341      ;341mm long
      SKIRT = NO
  SLOT(2) = EISA(2)   LENGTH = 341
      SKIRT = NO
      BUSMASTER = NO
  SLOT(3) = EISA(3)   LENGTH = 341
      SKIRT = NO
  SLOT(4) = EISA(4)   LENGTH = 341
      SKIRT = NO
  SLOT(5) = EISA(5)   LENGTH = 341
      SKIRT = NO
  SLOT(6) = EISA(6)   LENGTH = 341
      SKIRT = NO
  SLOT(7) = EISA(7)   LENGTH = 341
      SKIRT = NO
  SLOT(8) = EISA(8)   LENGTH = 341
      SKIRT = NO
  SLOT(9) = EISA(9)   LENGTH = 341
      SKIRT = NO
      BUSMASTER = NO
  SLOT(10)= ISA16(10) LENGTH = 341
      SKIRT = NO

JUMPER(1) = 2
  NAME="J3"
  JTYPE=inline
  REVERSE=no
  VERTICAL=no
  FACTORY=LOC(3^2 2^1) 10
  COMMENTS="This is the Jumper for Architecture type
	\n\tThe posts between 1 and 2 of jumper 3 indicate Symmetric mode.
	\n\tThe posts between 2 and 3 of jumper 3 indicate Asymmetric mode."

JUMPER(2) = 2
  NAME="JP2"
  JTYPE=inline
  REVERSE=Yes
  VERTICAL=Yes
  FACTORY=LOC(3^2 2^1) 10
  COMMENTS="This is the Jumper for INT2 type
	\n\tThe posts between 1 and 2 of jumper 3 indicate Symmetric mode.
	\n\tThe posts between 2 and 3 of jumper 3 indicate Asymmetric mode."


JUMPER(3) = 2
  NAME="JP3"
  JTYPE=inline
  REVERSE=Yes
  VERTICAL=Yes
  LABEL=LOC(3^2 2^1) "No Latch" "Latch"
  FACTORY=LOC(3^2 2^1) 01
  COMMENTS="INTR latch
	\n\tThe posts between 1 and 2 of jumper 3 indicate No Latch.
	\n\tThe posts between 2 and 3 of jumper 3 indicate Latch."

JUMPER(4) = 2
  NAME="JP4"
  JTYPE=inline
  REVERSE=Yes
  VERTICAL=Yes
  FACTORY=LOC(3^2 2^1) 01
  COMMENTS="This is the Jumper for FDD type
	\n\tJP4  JP5    FDD 1    FDD 2
	\n\t1^2  1^2    5.25     3.5
	\n\t1^2  2^3    3.5      5.25
	\n\t2^3  1^2    5.25     5.25
	\n\t2^3  2^3    5.25     5.25"

JUMPER(5) = 2
  NAME="JP5"
  JTYPE=inline
  REVERSE=Yes
  VERTICAL=Yes
  FACTORY=LOC(3^2 2^1) 10
  COMMENTS="This is the Jumper for FDD type
	\n\tJP4  JP5    FDD 1    FDD 2
	\n\t1^2  1^2    5.25     3.5
	\n\t1^2  2^3    3.5      5.25
	\n\t2^3  1^2    5.25     5.25
	\n\t2^3  2^3    5.25     5.25"

JUMPER(6) = 2
  NAME="JP6"
  JTYPE=inline
  REVERSE=Yes
  VERTICAL=Yes
  FACTORY=LOC(3^2 2^1) 10
  COMMENTS="This is the Jumper for INTA2 type
	\n\tThe posts between 1 and 2 of jumper 3 indicate Symmetric mode.
	\n\tThe posts between 2 and 3 of jumper 3 indicate Asymmetric mode."

JUMPER(7) = 2
  NAME="JP7"
  JTYPE=paired
  REVERSE=no
  VERTICAL=Yes
  FACTORY=LOC(1) 1
  COMMENTS="This is the Jumper for I/O recovery function
	\n\tJumper installed indicates Enable.
	\n\tJumper not installed indicates Disable."

JUMPER(8) = 2
  NAME="JP8"
  JTYPE=inline
  REVERSE=no
  VERTICAL=Yes
  FACTORY=LOC(3^2 2^1) 00
  COMMENTS="This is the Jumper for Cache type
	\n\tThe posts between 1 and 2 of jumper 3 indicate program by software.
	\n\tThe posts between 2 and 3 of jumper 3 indicate write-back type.
	\n\tJumper not installed indicates write-through type."

JUMPER(9) = 2
  NAME="JP1 of AMPIC card"
  JTYPE=inline
  REVERSE=no
  VERTICAL=no
  FACTORY=LOC(3^2 2^1) 10
  COMMENTS="This is the Jumper for INTA of 3rd CPU.
	\n\tThe posts between 1 and 2 of jumper 1 indicate Symmetric mode.
	\n\tThe posts between 2 and 3 of jumper 1 indicate Asymmetric mode.
	\n\tJumper not installed indicates write-through type."


JUMPER(10) = 2
  NAME="JP2 of AMPIC card"
  JTYPE=inline
  REVERSE=no
  VERTICAL=no
  FACTORY=LOC(3^2 2^1) 10
  COMMENTS="This is the Jumper for INTR of 4th CPU.
	\n\tThe posts between 1 and 2 of jumper 2 indicate Symmetric mode.
	\n\tThe posts between 2 and 3 of jumper 2 indicate Asymmetric mode.
	\n\tJumper not installed indicates write-through type."

JUMPER(11) = 2
  NAME="JP3 of AMPIC card"
  JTYPE=inline
  REVERSE=no
  VERTICAL=no
  FACTORY=LOC(3^2 2^1) 10
  COMMENTS="This is the Jumper for INTA of 4th CPU.
	\n\tThe posts between 1 and 2 of jumper 3 indicate Symmetric mode.
	\n\tThe posts between 2 and 3 of jumper 3 indicate Asymmetric mode.
	\n\tJumper not installed indicates write-through type."

JUMPER(12) = 2
  NAME="JP4 of AMPIC card"
  JTYPE=inline
  REVERSE=no
  VERTICAL=no
  FACTORY=LOC(3^2 2^1) 10
  COMMENTS="This is the Jumper for INTR of 3rd CPU.
	\n\tThe posts between 1 and 2 of jumper 4 indicate Symmetric mode.
	\n\tThe posts between 2 and 3 of jumper 4 indicate Asymmetric mode.
	\n\tJumper not installed indicates write-through type."

SOFTWARE(1)="Setup Screen RAM BIOS setting:"

; MEMTYPE change from SYS to OTH to avoid NT hange up. Jeff 12/12/91

FUNCTION = "System BIOS type"

  CHOICE = "RAM BIOS Enable"
    LINK
     MEMORY=128K
     ADDRESS=0E0000H
     MEMTYPE=OTH
     WRITABLE=NO
     SIZE=DWORD
     DECODE=32
     CACHE=YES
     INIT=SOFTWARE(1) "\tRAM BIOS Enable"

  CHOICE = "RAM BIOS Disable"
    LINK
     MEMORY=64K
     ADDRESS=0F0000H
     MEMTYPE=OTH
     WRITABLE=NO
     SIZE=WORD
     DECODE=32
     CACHE=YES
     INIT=SOFTWARE(1) "\tRAM BIOS Disable"

FUNCTION = "System Processor"
  TYPE = "CPU,Pentium"
    CHOICE = "Pentium at 60MHz"
      SUBTYPE = "Pentium;SPE=60"
    CHOICE = "Pentium at 66MHz"
      SUBTYPE = "Pentium;SPE=66"

FUNCTION="Special System Ports"

  CHOICE="Special System Ports"
    LINK
	PORT=0800H-08FFH
	SHARE=NO
	SIZE=BYTE

	PORT=0C00H
	SHARE=NO
	SIZE=BYTE

	PORT=0C02H-0C07H
	SHARE=NO
	SIZE=BYTE

FUNCTION="EISA Reserved Devices"

  CHOICE="EISA Reserved Devices"
    LINK
	PORT=0H-0FFH
	SHARE=NO
	SIZE=BYTE

	PORT=0400H-04FFH
	SHARE=NO
	SIZE=BYTE

	PORT=0C80H-0C84H
	SHARE=NO
	SIZE=BYTE

GROUP = "System Memory Functions"
  FUNCTION = "Base System Memory"
    TYPE = "MEM"
    CHOICE = "640K Base Memory "
    COMBINE
	MEMORY=639K
	ADDRESS=0
	WRITABLE=YES
	MEMTYPE=SYS
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "4   -  16MB Extended Memory"
    TYPE = "MEM"
    CHOICE = "4MB Ext Memory"
    COMBINE
      MEMORY=3M
	ADDRESS=1M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
    CHOICE = "8MB Ext Memory"
    COMBINE
      MEMORY=7M
	ADDRESS=1M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
    CHOICE = "12MB Ext Memory"
    COMBINE
      MEMORY=11M
	ADDRESS=1M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
    CHOICE = "16MB Ext Memory with 15-16MB System use"
    COMBINE
      MEMORY=15M
	ADDRESS=1M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
    CHOICE = "16MB Ext Memory with 15-16MB Add-on card use"
    COMBINE
      MEMORY=14M
	ADDRESS=1M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "16  -  64MB Extended Memory"
    TYPE = "MEM"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
	  Memory size setting should be equal to the size installed in
	  the memory block 16 - 64MB."
    CHOICE = "16  -  64MB Ext Memory"
    COMBINE
      MEMORY=0M  - 48M STEP=4M
	ADDRESS=16M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "64  - 128MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
	  Memory size setting should be equal to the size installed in
	  the memory block 64 - 128MB."
    CHOICE = "64  - 128MB Ext Memory "
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=64M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "128 - 192MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
	  Memory size setting should be equal to the size installed in
	  the memory block 128 - 192MB."
    CHOICE = "128 - 192MB Ext Memory "
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=128M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "192 - 256MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
	  Memory size setting should be equal to the size installed in
	  the memory block 192 - 256MB."
    CHOICE = "192 - 256MB Ext Memory "
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=192M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "256 - 320MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
	  Memory size setting should be equal to the size installed in
	  the memory block 256 - 320MB."
    CHOICE = "256 - 320MB Ext Memory "
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=256M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "320 - 384MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
	  Memory size setting should be equal to the size installed in
	  the memory block 320 - 384MB."
    CHOICE = "320 - 384MB Ext Memory "
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=320M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "384 - 448MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
	  Memory size setting should be equal to the size installed in
	  the memory block 384 - 448MB."
    CHOICE = "384 - 448MB Ext Memory "
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=384M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "448 - 512MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
	  Memory size setting should be equal to the size installed in
	  the memory block 448 - 512MB."
    CHOICE = "448 - 512MB Ext Memory "
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=448M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "512 - 576MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
	  Memory size setting should be equal to the size installed in
	  the memory block 512 - 576MB."
    CHOICE = "512 - 576MB Ext Memory "
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=512M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "576 - 640MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
	  Memory size setting should be equal to the size installed in
	  the memory block 576 - 640MB."
    CHOICE = "576 - 640MB Ext Memory "
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=576M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "640 - 704MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
	  Memory size setting should be equal to the size installed in
	  the memory block 640 - 704MB."
    CHOICE = "640 - 704MB Ext Memory "
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=640M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "704 - 768MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
	  Memory size setting should be equal to the size installed in
	  the memory block 704 - 768MB."
    CHOICE = "704 - 768MB Ext Memory "
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=704M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "768 - 832MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
	  Memory size setting should be equal to the size installed in
	  the memory block 768 - 832MB."
    CHOICE = "768 - 832MB Ext Memory "
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=768M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "832 - 896MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
	  Memory size setting should be equal to the size installed in
	  the memory block 832 - 896MB."
    CHOICE = "832 - 896MB Ext Memory "
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=832M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "896 - 960MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
	  Memory size setting should be equal to the size installed in
	  the memory block 896 - 960MB."
    CHOICE = "896 - 960MB Ext Memory "
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=896M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO
  FUNCTION = "960 - 1024MB Extended Memory"
    HELP="Using [Ctrl]+[R] to configure the exact extended memory size.\n\n
	  Memory size setting should be equal to the size installed in
	  the memory block 960 - 1024MB."
    CHOICE = "960 - 1024MB Ext Memory "
    COMBINE
      MEMORY=0M - 64M STEP=4M
	ADDRESS=960M
	MEMTYPE=SYS
	WRITABLE=YES
	SIZE=DWORD
	DECODE=32
	CACHE=YES
	SHARE=NO

ENDGROUP

FUNCTION = "Mouse port"
  TYPE     = "PTR,8042"
  COMMENTS = "The mouse port is a PS/2 compatible port."
  CONNECTION = "Standard PS/2 style DIN connector"

  CHOICE   = "Enabled"
	DISABLE = NO
	FREE
	IRQ = 12
	    SHARE   = NO
	    TRIGGER = EDGE
  CHOICE = "Disabled"
	DISABLE = YES

FUNCTION = "Keyboard port"
	TYPE = "KEY,8042"
	COMMENTS = "PS/2 compatible keyboard"
	CONNECTION = "Standard PS/2 style DIN connector"
	HELP    = "The installed keyboard must be set to send 'PS/2' or
	'AT' style key codes."

	CHOICE = "Enabled"
		DISABLE = NO
		FREE
		IRQ = 1
		   SHARE = NO
		   TRIGGER = EDGE

FUNCTION = "Floppy Disk Controller"
  TYPE = "MSD,FPYCTL,FIFO"
  COMMENTS = "This controller is a superset of the typical ISA floppy disk
	      controller.  It can support a maximum of two floppy drives. Any
	      combination of 5 1/4 inch or 3 1/2 inch drives may be used."

  CHOICE = "Enabled"
      FREE
	IRQ = 6
	  SHARE = NO
	  TRIGGER = EDGE
	PORT = 03f0h - 03f5h
	  SIZE = BYTE
	PORT = 03f6h - 03f7h
	  SIZE = BYTE
	  SHARE="ATdIsk"

	DMA = 2
	  SIZE = BYTE

  CHOICE = "Disabled"
      DISABLE = YES

FUNCTION = "IDE HDD Interface"
  TYPE = "MSD,IDE"
  COMMENTS = "The IDE interface is software compatible with a standard AT
	      hard disk controller."

  CHOICE = "Enabled"
      FREE
      IRQ = 14
	SHARE = NO
	TRIGGER = EDGE
      PORT = 01f0h - 01f7h
	SIZE = BYTE
      PORT = 03f6h - 03f7h
	  SIZE = BYTE
	  SHARE="ATdIsk"

  CHOICE = "Disabled"
      DISABLE = YES

FUNCTION = "Parallel port"
  TYPE = "PAR"
  COMMENTS = "The parallel port has a standard 25 pin connector (AT style)
	and is a superset of a typical ISA parallel port."
  HELP = "The settings in BIOS SETUP must match your choice."

  CHOICE = "Enabled as LPT1 (3BCh)"
      SUBTYPE = "LPT1"
      FREE
	IRQ = 7
	  SHARE = NO
	  TRIGGER = EDGE

	PORT = 03bch - 03bfh
	  SIZE = BYTE

  CHOICE = "Enabled as LPT2 (378h)"
      SUBTYPE = "LPT2"
      FREE
	IRQ = 7
	  SHARE = NO
	  TRIGGER = EDGE

	PORT = 0378h - 037fh
	  SIZE = BYTE

  CHOICE = "Enabled as LPT3 (278h)"
      SUBTYPE = "LPT3"
      FREE
	IRQ = 7
	  SHARE = NO
	  TRIGGER = EDGE

	PORT = 0278h - 027fh
	  SIZE = BYTE

  CHOICE = "Disabled"
      DISABLE = YES

FUNCTION = "Serial port 1 (25 pins)"
  TYPE = "COM,ASY"
  COMMENTS = "This serial port has a standard 25 pin connector."
  HELP = "The settings in BIOS SETUP must match your choice."

  CHOICE = "Enabled as COM1 (3F8h)"
	SUBTYPE = "COM1"
	FREE
	IRQ = 4
	  SHARE = NO
	  TRIGGER = EDGE
	PORT = 03F8h - 03FFh
	  SIZE = BYTE

  CHOICE = "Enabled as COM2 (2F8h)"
      SUBTYPE = "COM2"
      FREE
	IRQ = 3
	  SHARE = NO
	  TRIGGER = EDGE
	PORT = 02F8h - 02FFh
	  SIZE = BYTE

  CHOICE = "Disabled"
      DISABLE = YES

FUNCTION = "Serial port 2 (9 pins)"
  TYPE = "COM,ASY"
  COMMENTS = "This serial port has a standard 9 pin connector."
  HELP = "The settings in BIOS SETUP must match your choice."

  CHOICE = "Enabled as COM2 (2F8h)"
      SUBTYPE = "COM2"
      FREE
	IRQ = 3
	  SHARE = NO
	  TRIGGER = EDGE
	PORT = 02F8h - 02FFh
	  SIZE = BYTE

  CHOICE = "Enabled as COM1 (3F8h)"
	SUBTYPE = "COM1"
	FREE
	IRQ = 4
	  SHARE = NO
	  TRIGGER = EDGE
	PORT = 03F8h - 03FFh
	  SIZE = BYTE

  CHOICE = "Disabled"
      DISABLE = YES
;-------------------------------------------------------------------------
; Modify record:
;
; V1.01 07/16/93 Jack Liao
;                       ; supports Pentium CPU
; 
; V1.01 08/31/93 Jack Liao
;                       ;supports ECC memory card (max 1G bytes)
;-------------------------------------------------------------------------