;   ======================================================================
;   AIR ENET-2V EISA 32-bit Network Interface Controller
;   (C)Copyright Advanced Integration Research, Inc, 1992
;   All Rights Reserved.
;   7/27/92  Version 1.1
;   ======================================================================

BOARD
   ID = "AIR3101"
   NAME = "ENET-2V LOCAL BUS MASTER ETHERNET ADAPTER"
   MFR  = "A.I.R. INC."
   CATEGORY  = "NET"
   SLOT      = EISA
   LENGTH    = 226
   READID    = yes
   AMPERAGE  = 1000
   IOCHECK   = INVALID

   DISABLE   = SUPPORTED

   COMMENTS  = " The AIR ENET-2V Board is a high performance VESA LOCAL BUS
                MASTER Ethernet controller card.  The board supports 10BASE-T
                (Twisted pair), 10BASE-2 (BNC Thin-Ethernet), and 10BASE-5
                (AUI Thick-Ethernet)."

   IOPORT(1) = 0zc88h
   IOPORT(2) = 0zc89h
   IOPORT(3) = 0zc8Ah

   FUNCTION = " EISA SLOT SPECIFIC SELECTION"

    HELP=" User has to idenfify the slot number where the current editing card
           is being installed.  If you are not sure, please go back to the
           main manual to verify the slot # of the current editing card."


        CHOICE = "CARD INSTALLED IN SLOT NUMBER 7"
         FREE
         INIT = IOPORT(2) LOC(3-0) 0111
        CHOICE = "CARD INSTALLED IN SLOT NUMBER 6"
         FREE
         INIT = IOPORT(2) LOC(3-0) 0110
        CHOICE = "CARD INSTALLED IN SLOT NUMBER 5"
         FREE
         INIT = IOPORT(2) LOC(3-0) 0101
        CHOICE = "CARD INSTALLED IN SLOT NUMBER 4"
         FREE
         INIT = IOPORT(2) LOC(3-0) 0100
        CHOICE = "CARD INSTALLED IN SLOT NUMBER 3"
         FREE
         INIT = IOPORT(2) LOC(3-0) 0011
        CHOICE = "CARD INSTALLED IN SLOT NUMBER 2"
         FREE
         INIT = IOPORT(2) LOC(3-0) 0010
        CHOICE = "CARD INSTALLED IN SLOT NUMBER 1"
         FREE
         INIT = IOPORT(2) LOC(3-0) 0001


FUNCTION = "Ethernet Thin (Coaxial) or Thick (AUI)/10BASE-T Selection"
   CONNECTION = "P1 (AUI, 15 pin D); P2 (Thinnet, BNC) or P3 (10BASE-T)"

      CHOICE = "Thin Ethernet 10BASE-2"
        LINK
        INIT = IOPORT(3) LOC(1-0) 11

      CHOICE = "Thick Ethernet 10BASE-5 or 10BASE-T Twisted Pair"
        LINK
        INIT = IOPORT(3) LOC(1-0) 01

FUNCTION = "ENET-2V Ethernet Host Adapter I/O Addresses"
   COMMENTS = "This board supports both slot-specific and ISA\n
                compatible I/O addressing.  The ISA mode should only\n
                be used for software compatibility with ISA drivers."

      CHOICE = "EISA Mode with Host adapter slot specific address"
        FREE
        INIT = IOPORT(2) LOC(7-4) 0000

      CHOICE = "ISA Mode with Host adapter I/O address 100h-11Fh"
        LINK
        INIT = IOPORT(2) LOC(7-4) 0001
        PORT = 100h-11Fh

      CHOICE = "ISA Mode with Host adapter I/O address 120h-13Fh"
        LINK
        INIT = IOPORT(2) LOC(7-4) 0011
        PORT = 120h-13Fh

      CHOICE = "ISA Mode with Host adapter I/O address 140h-15Fh"
        LINK
        INIT = IOPORT(2) LOC(7-4) 0101
        PORT = 140h-15Fh

      CHOICE = "ISA Mode with Host adapter I/O address 160h-17Fh"
        LINK
        INIT = IOPORT(2) LOC(7-4) 0111
        PORT = 160h-17Fh

      CHOICE = "ISA Mode with Host adapter I/O address 300h-31Fh"
        LINK
        INIT = IOPORT(2) LOC(7-4) 1001
        PORT = 300h-31Fh

      CHOICE = "ISA Mode with Host adapter I/O address 320h-33Fh"
        LINK
        INIT = IOPORT(2) LOC(7-4) 1011
        PORT = 320h-33Fh

      CHOICE = "ISA Mode with Host adapter I/O address 340h-35Fh"
        LINK
        INIT = IOPORT(2) LOC(7-4) 1101
        PORT = 340h-35Fh


FUNCTION = "AIR ENET-2V Ethernet Host Adapter ROM"
      CHOICE = "ROM Disabled (Default)"
        FREE
        INIT = IOPORT(3) LOC(7-6) 00

      CHOICE = "Enable Adapter ROM at C0000-C7FFFF"
        LINK
        MEMORY = 32K
        ADDRESS = 0C0000H
        WRITABLE = NO
        MEMTYPE = OTHER
        SIZE = BYTE
        DECODE = 24
        CACHE = YES
        INIT = IOPORT(2) LOC(5-4) 00
        INIT = IOPORT(3) LOC(7-6) 11

      CHOICE = "Enable Adapter ROM at C8000-CFFFFF"
        LINK
        MEMORY = 32K
        ADDRESS = 0C8000H
        WRITABLE = NO
        MEMTYPE = OTHER
        SIZE = BYTE
        DECODE = 24
        CACHE = YES
        INIT = IOPORT(2) LOC(5-4) 01
        INIT = IOPORT(3) LOC(7-6) 11

      CHOICE = "Enable Adapter ROM AT D0000-D7FFFF"
        LINK
        MEMORY = 32K
        ADDRESS = 0D0000H
        WRITABLE = NO
        MEMTYPE = OTHER
        SIZE = BYTE
        DECODE = 24
        CACHE = YES
        INIT = IOPORT(2) LOC(5-4) 10
        INIT = IOPORT(3) LOC(7-6) 11

      CHOICE = "Enable Adapter ROM at D8000-D8FFFF"
        LINK
        MEMORY = 32K
        ADDRESS = 0D8000H
        WRITABLE = NO
        MEMTYPE = OTHER
        SIZE = BYTE
        DECODE = 24
        CACHE = YES
        INIT = IOPORT(2) LOC(5-4) 11
        INIT = IOPORT(3) LOC(7-6) 11

FUNCTION = "AIR ENET-2V Ethernet Host Adapter Interrupt"

   SUBFUNCTION = "Interrupt Edge/Level"
      CHOICE = "Edge Triggered Interrupt 9"
      LINK
        IRQ = 9
        TRIGGER = EDGE
        SHARE = NO
        INIT = IOPORT(1) LOC(2-0) 011
        INIT = IOPORT(1) LOC(3) 0
        INIT = IOPORT(1) LOC(7-5) 110

      CHOICE = "Edge Triggered Interrupt 10"
      LINK
        IRQ = 10
        TRIGGER = EDGE
        SHARE = NO
        INIT = IOPORT(1) LOC(2-0) 101
        INIT = IOPORT(1) LOC(3) 0
        INIT = IOPORT(1) LOC(7-5) 110

      CHOICE = "Edge Triggered Interrupt 11"
      LINK
        IRQ = 11
        TRIGGER = EDGE
        SHARE = NO
        INIT = IOPORT(1) LOC(2-0) 111
        INIT = IOPORT(1) LOC(3) 0
        INIT = IOPORT(1) LOC(7-5) 110

      CHOICE = "Edge Triggered Interrupt 5"
      LINK
        IRQ = 5
        TRIGGER = EDGE
        SHARE = NO
        INIT = IOPORT(1) LOC(2-0) 001
        INIT = IOPORT(1) LOC(3) 0
        INIT = IOPORT(1) LOC(7-5) 110