;AST-3G Plus II Configuration File
;!AST8410.CFG
;Version 2.00       Nov 1, 1991

BOARD
  ID = "AST8410"
  NAME = "AST-3G Plus II"
  MFR = "AST"
  CATEGORY = "VID"
  SLOT = ISA8
  LENGTH = 131
  SKIRT = NO
  READID = NO
  DISABLE = UNSUPPORTED
  IOCHECK = INVALID
  COMMENTS = "AST-3G Plus II is an Enhanced Graphics
	      Adapter (EGA) board that supports
	      Color/Graphics Adapter (CGA), Hercules
              Graphics Card (HGC), and Monochrome
              Display Adapter (MDA) modes."

SWITCH( 1 ) = 6
  STYPE = DIP
  NAME = "SW1"
  VERTICAL = YES
  REVERSE = YES
  COMMENTS = "Switches 1--4 set power-up mode, switch 5
	      enables auto-emulation mode, and switch 6
	      enables auto-monitor mode."
  HELP = "Switch SW1 sets the AST-3G Plus II board
          operation modes.  Switches 1-4 selects which
          display mode the board uses on power up.
          Switch 5 enables CGA or HGC emulation on
          power up.  Switch 6 enables automatic display
          selection by sensing the monitor type."

FUNCTION = "Power-Up Mode"
   TYPE = "VID"
   COMMENTS = "Select the display mode AST-3G Plus II uses
	      when you turn the computer on."
   HELP="You can configure the AST-3G Plus II to start up
         in one of several operation modes, depending on
         your configuration.  If you enable auto-monitor 
         mode, you do not need to set these switches."

   CHOICE = "Primary Adapter: EGA, 80 x 25"
     FREE
     INIT = SWITCH( 1 )  LOC( 1-4 ) 0110
     FREE
     MEMORY=32k
     ADDRESS=0B8000h
     MEMTYPE=OTHER
     WRITABLE=YES
     FREE
     PORT = 3D0h-3DFh
     PORT = 3C0h-3CFh

   CHOICE = "Primary Adapter: CGA, 80 x 25"
     FREE
     INIT = SWITCH( 1 )  LOC( 1-4 ) 1110
     FREE
     MEMORY=32k
     ADDRESS=0B8000h
     MEMTYPE=OTHER
     WRITABLE=YES
     FREE
     PORT = 3D0h-3DFh
     PORT = 3C0h-3CFh

   CHOICE = "Primary Adapter: CGA, 40 x 25"
     FREE
     INIT = SWITCH( 1 )  LOC( 1-4 ) 1001
     FREE
     MEMORY=32k
     ADDRESS=0B8000h
     MEMTYPE=OTHER
     WRITABLE=YES
     FREE
     PORT = 3D0h-3DFh
     PORT = 3C0h-3CFh

   CHOICE = "Primary Adapter: MDA, 80 x 25"
     FREE
     INIT = SWITCH( 1 )  LOC( 1-4 ) 0010
     FREE
     MEMORY=32k
     ADDRESS=0B0000h
     MEMTYPE=OTHER
     WRITABLE=YES
     FREE
     PORT = 3B0h-3BBh
     PORT = 3C0h-3CFh

   CHOICE = "Secondary Adapter: EGA, 80 x 25"
     FREE
     INIT = SWITCH( 1 )  LOC( 1-4 ) 0011
     FREE
     MEMORY=32k
     ADDRESS=0B0000h
     MEMTYPE=OTHER
     WRITABLE=YES
     FREE
     PORT = 3D0h-3DFh
     PORT = 3C0h-3CFh

   CHOICE = "Secondary Adapter: CGA, 80 x 25"
     FREE
     INIT = SWITCH( 1 )  LOC( 1-4 ) 1011
     FREE
     MEMORY=32k
     ADDRESS=0B8000h
     MEMTYPE=OTHER
     WRITABLE=YES
     FREE
     PORT = 3D0h-3DFh
     PORT = 3C0h-3CFh

   CHOICE = "Secondary Adapter: CGA, 40 x 25"
     FREE
     INIT = SWITCH( 1 )  LOC( 1-4 ) 1111
     FREE
     MEMORY=32k
     ADDRESS=0B8000h
     MEMTYPE=OTHER
     WRITABLE=YES
     FREE
     PORT = 3D0h-3DFh
     PORT = 3C0h-3CFh

   CHOICE = "Secondary Adapter: MDA, 80 x 25"
     FREE
     INIT = SWITCH( 1 )  LOC( 1-4 ) 0101
     FREE
     MEMORY=32k
     ADDRESS=0B0000h
     MEMTYPE=OTHER
     WRITABLE=YES
     FREE
     PORT = 3B0h-3BBh
     PORT = 3C0h-3CFh

FUNCTION = "Auto-Monitor Mode"
   TYPE = "VID"
   COMMENTS = "Set automatic display mode."
   HELP = "When auto-monitor mode is enabled, the AST-3G Plus II
           board senses the monitor type and automatically
           selects the appropriate display mode.  To enable
           auto-monitor mode, select On.\n
           \n
           Some monitors do not support Auto-monitor mode.  If
           this is the case with your monitor, select Off."
     CHOICE = "ON"
       FREE
       INIT = SWITCH( 1 )  LOC( 6 ) 1
     CHOICE = "OFF"
       FREE
       INIT = SWITCH( 1 )  LOC( 6 ) 0

FUNCTION = "Auto-Emulation Mode"
   TYPE = "VID"
   COMMENTS = "Enable HGC or CGA emulation when the computer
	      is turned on."
   HELP = "When auto-emulation mode is enabled, the AST-3G Plus II 
           will emulate HGC mode if connected to a 
           monochrome monitor, or CGA mode if connected to
           a color monitor.  HGC/CGA emulation can also be
           enabled with the EMUL.COM program."
     CHOICE = "ON"
       FREE
       INIT = SWITCH( 1 )  LOC( 5 ) 1
     CHOICE = "OFF"
       FREE
       INIT = SWITCH( 1 )  LOC( 5 ) 0

FUNCTION = "AST-3G Plus II ROM BIOS Memory"
   TYPE = "MEM"
   SHOW = NO
   CHOICE = "C0000h-C3FFFh"
       FREE
       MEMORY=16k
       ADDRESS=0C0000h
       MEMTYPE=OTHER
       WRITABLE=NO