;
;Chase Intelligent Serial I/O Controller: Configuration file V1.05
;Written by:  H.M.D.Swan               1.5.90
;Modification record:
;	19.7.90		HMDS	Interrupt level changed to 12
;	17.10.90	HMDS	Interrupt levels configurable
;	30.10.90	HMDS	DMA choice extended
;	02.11.90	HMDS	DMA selection removed
;	29.11.90	SRK	Interrupt choice re_ordered
;!cha0101.cfg
;
BOARD 
  ID = "CHA0101"
  NAME = "Chase Research EISA16 Serial I/O Controller"
  MFR = "Chase Research Limited"
  CATEGORY = "COM"
  SLOT = EISA
  LENGTH = 341
  AMPERAGE = 3000
  SKIRT = NO
  READID = YES
  BUSMASTER = 400
  IOCHECK = INVALID
  DISABLE = UNSUPPORTED
  COMMENTS = "The Chase Intelligent Serial I/O Controller type EISA4, EISA8,
              EISA16 provide 4, 8, or 16 asynchronous (RS232C) communications 
              ports respectively, two of which support full modem control."

IOPORT(1) = 0ZC80h
  SIZE = BYTE
  INITVAL = 0000xxxx

IOPORT(2) = 0ZC90h
  SIZE = BYTE
  INITVAL = 0000xxxx

JUMPER(1) = 1
  NAME = "JP1"
  JTYPE = PAIRED
  VERTICAL = YES
  LABEL = LOC(1) "SELF-TEST"
  INITVAL = LOC(1) 0
  FACTORY = LOC(1) 0
  COMMENTS = "This jumper is absent for normal operation of the card. If
              present, the card performs a self-test sequence. (Intended
              for factory use). See hardware Manual for details."

FUNCTION = "Interrupt Level"
  TYPE = "COM, Multiple"        
  CHOICE = "IRQ Select"
    LINK
      IRQ = 9|11| 5|10|12| 3| 4|14
        SHARE =YES 
        TRIGGER = LEVEL
      INIT = IOPORT(1) LOC(3 2 1 0) 1111|1001|1110|1000|1010|1100|1101|1011
      INIT = IOPORT(2) LOC(3 2 1 0) 1001|1011|0101|1010|1100|0011|0100|1110