; eMASTER+ AT Combo (16-bit Workstation LAN Adapter) ; Cogent Data Technologies, Inc. 1993 ; Board Number 525001-00 ; Version 1.0, (930820) ; ; BOARD ID = "COG5000" ; Product ID. NAME = "Cogent eMASTER+ AT Combo 16-Bit Workstation Ethernet Adapter" MFR = "Cogent Data Technologies, Inc." CATEGORY = "NET" ; Category, i.e. Network Board. SLOT = ISA16 ; Uses ISA Slot. LENGTH = 187 ; Length of Board in Millimeters. READID = NO ; Board ID can be read AMPERAGE = 1000 ; IOCHECK = INVALID ; No IOCHKERR bit. DISABLE = UNSUPPORTED ; COMMENTS = "The Cogent eMASTER+ AT Combo is a 16-bit 595 based Ethernet Adapter for the ISA or EISA bus." HELP = "This configuration process will register the system resources used by the eMASTER+ AT Combo Ethernet adapter with the EISA configuration program. The actual configuration of the adapter is performed by using the EMSETUP program provided with your adapter." ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; SOFTWARE(1) = "The Cogent eMASTER+ AT Combo Ethernet Adapter has: \n \tODI drivers for Netware 386 and 4.X workstations\n \tNDIS drivers for DOS and OS/2\n A diagnostic and setup utility (EMSETUP) is also supplied for configuration and testing.\n\n The following settings may be required by your software:" ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; FUNCTION = "eMASTER+ AT Combo Ethernet Adapter" HELP = "The following information describes the use and purpose for each of the functions in this configuration file:" SUBFUNCTION = "IRQ number" COMMENTS = "The eMASTER+ AT adapter supports several different interrupt locations. The interrupt selected must be unique to each adapter and must not conflict with any other adapters or resources in the system." HELP = "This selection registers the interrupt being used by the eMASTER+ AT adapter with your system." CHOICE = "IRQ 10" LINK IRQ = 10 INIT = SOFTWARE(1) "\tIRQ = 10" CHOICE = "IRQ 3" LINK IRQ = 3 INIT = SOFTWARE(1) "\tIRQ = 3" CHOICE = "IRQ 5" LINK IRQ = 5 INIT = SOFTWARE(1) "\tIRQ = 5" CHOICE = "IRQ 9" LINK IRQ = 9 INIT = SOFTWARE(1) "\tIRQ = 9" CHOICE = "IRQ 11" LINK IRQ = 11 INIT = SOFTWARE(1) "\tIRQ = 11" SUBFUNCTION = "I/O Port Address" COMMENTS = "The eMASTER+ AT Combo Ethernet Adapter uses 16 I/O locations which must be unique to each adapter, and must not conflict with other adapters or resources in your system." HELP = "This selection registers the I/O locations being used by the eMASTER+ AT adapter with your system." CHOICE = "300h" LINK PORT = 300h - 30Fh INIT = SOFTWARE(1) "\tI/O Base = 300h" CHOICE = "310h" LINK PORT = 310h - 31Fh INIT = SOFTWARE(1) "\tI/O Base = 310h" CHOICE = "320h" LINK PORT = 320h - 32Fh INIT = SOFTWARE(1) "\tI/O Base = 320h" CHOICE = "330h" LINK PORT = 330h - 33Fh INIT = SOFTWARE(1) "\tI/O Base = 330h" CHOICE = "340h" LINK PORT = 340h - 34Fh INIT = SOFTWARE(1) "\tI/O Base = 340h" CHOICE = "350h" LINK PORT = 350h - 35Fh INIT = SOFTWARE(1) "\tI/O Base = 350h" CHOICE = "360h" LINK PORT = 360h - 36Fh INIT = SOFTWARE(1) "\tI/O Base = 360h" CHOICE = "370h" LINK PORT = 370h - 37Fh INIT = SOFTWARE(1) "\tI/O Base = 370h" CHOICE = "380h" LINK PORT = 380h - 38Fh INIT = SOFTWARE(1) "\tI/O Base = 380h" CHOICE = "390h" LINK PORT = 390h - 39Fh INIT = SOFTWARE(1) "\tI/O Base = 390h" CHOICE = "3A0h" LINK PORT = 3A0h - 3AFh INIT = SOFTWARE(1) "\tI/O Base = 3A0h" CHOICE = "3B0h" LINK PORT = 3B0h - 3BFh INIT = SOFTWARE(1) "\tI/O Base = 3B0h" CHOICE = "3C0h" LINK PORT = 3C0h - 3CFh INIT = SOFTWARE(1) "\tI/O Base = 3C0h" CHOICE = "3D0h" LINK PORT = 3D0h - 3DFh INIT = SOFTWARE(1) "\tI/O Base = 3D0h" CHOICE = "3E0h" LINK PORT = 3E0h - 3EFh INIT = SOFTWARE(1) "\tI/O Base = 3E0h" SUBFUNCTION = "Boot PROM" COMMENTS = "The eMASTER+ AT Combo Ethernet Adapter has an optional boot PROM socket. Normally, no boot PROM will be installed, so the default of Disabled is usually correct." HELP = "Specifies the memory location of the boot PROM if one is installed on the adapter for remote system booting over the network. The boot PROM occupies 16K of system memory space when installed and enabled." CHOICE = "Disabled -> No boot PROM" LINK INIT = SOFTWARE(1) "\tROM = Disabled" CHOICE = "C800 -> C8000h - CBFFFh" LINK MEMORY = 16k ADDRESS = 0c8000h MEMTYPE = oth WRITABLE = no SIZE = word DECODE = 20 INIT = SOFTWARE(1) "\tROM = 16K at C800" CHOICE = "CC00 -> CC000h - CFFFFh" LINK MEMORY = 16k ADDRESS = 0cc000h MEMTYPE = oth WRITABLE = no SIZE = word DECODE = 20 INIT = SOFTWARE(1) "\tROM = 16K at CC00" CHOICE = "D000 -> D0000h - D3FFFh" LINK MEMORY = 16k ADDRESS = 0d0000h MEMTYPE = oth WRITABLE = no SIZE = word DECODE = 20 INIT = SOFTWARE(1) "\tROM = 16K at D000" CHOICE = "D400 -> D4000h - D7FFFh" LINK MEMORY = 16k ADDRESS = 0d4000h MEMTYPE = oth WRITABLE = no SIZE = word DECODE = 20 INIT = SOFTWARE(1) "\tROM = 16K at D400" CHOICE = "D800 -> D8000h - DBFFFh" LINK MEMORY = 16k ADDRESS = 0d8000h MEMTYPE = oth WRITABLE = no SIZE = word DECODE = 20 INIT = SOFTWARE(1) "\tROM = 16K at D800" CHOICE = "DC00 -> DC000h - DFFFFh" LINK MEMORY = 16k ADDRESS = 0dc000h MEMTYPE = oth WRITABLE = no SIZE = word DECODE = 20 INIT = SOFTWARE(1) "\tROM = 16K at DC00"