; eMASTER+ EISA (32-Bit NON-BURSTING LAN ADAPTER)
; Cogent Data Technologies, Inc. 1993
; Board Number 932001-04
; Version 1.01, (940314)
;
;---------------------------------
;  Revision History
;---------------------------------
;  1.00 8/17/93    Initial release
;  1.01 3/14/94    Latch shared interrupts
;

BOARD
   ID = "COG9003"               ; Product ID.
   NAME = "Cogent eMASTER+ EISA 32-Bit Non-Bursting Ethernet Adapter"
   MFR = "Cogent Data Technologies, Inc."
   CATEGORY = "NET"             ; Category, i.e. Network Board.
   SLOT = EISA                  ; Uses EISA Slot.
   LENGTH = 216                 ; Length of Board in Millimeters.
   READID = YES                 ; Board ID can be read
   BUSMASTER = 40               ; Bus latency time allowed
   AMPERAGE = 1000              ;
   IOCHECK = INVALID            ; No IOCHKERR bit.
   DISABLE = SUPPORTED          ; Disabled by clearing
                                ;  the control register ENABLE bit.

   COMMENTS = " The Cogent eMASTER+ EISA is a 32-bit
                596 Ethernet Adapter for the EISA bus. "
   HELP = "The Cogent eMASTER+ EISA is a 32-bit bus-mastering
           ethernet adapter.  This configuration process will help
           you select the IRQ and Ethernet cable type used by the
           eMASTER+."

IOPORT(1) = 0zc88h
        INITVAL = 1100xxxx                      ;32 bit data size
                                                ;bus release after 23 BCLKs
IOPORT(2) = 0zc89h
        INITVAL = 00000xxx                      ;slot specific I/O only

IOPORT(3) = 0zc8Ah
        INITVAL = LOC(7-6) 00                   ;No Boot ROM

IOPORT(4) = 0zc8Fh
        INITVAL = 00000000                      ;immediate bus release
                                                ;No Read or Write Bursting

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

SOFTWARE(1) =  "The Cogent eMASTER+ EISA has \n
                \tODI drivers for NetWare 386 servers and workstations.\n
                \tNDIS drivers for DOS, OS/2 and VINES.\n
                \tLLI Streams drivers for UNIX.\n
                A diagnostic (EMSETUP) is supplied for testing."

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
GROUP = "Interrupt Selection"

   ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
   FUNCTION = "eMASTER+ IRQ Number"
      COMMENTS = "The eMASTER+ EISA allows unshared (edge-triggered)
                  or shared (level-triggered) interrupts.  Select an
                  interrupt number and IRQ sharing option for the
                  eMASTER+ EISA to use."
      HELP = "Shared interrupts may be used to allow multiple eMASTER+
              EISA adapters to share the same interrupt.  Cogent does
              not recommend sharing interrupts with other types of
              adapters.\n
              Unshared interrupts should be used if your EISA system
              cannot support shared interrupts or if only a single
              eMASTER+ will be used in your system."

        CHOICE = "IRQ  5, trigger:edge, unshared"
          SUBTYPE = "IRQ5"
          LINK
            IRQ = 5
              TRIGGER = EDGE
              SHARE = NO
            INIT = IOPORT(1) LOC(3-0) 0001

        CHOICE = "IRQ 9, trigger:edge, unshared"
          SUBTYPE = "IRQ9"
          LINK
            IRQ = 9
              TRIGGER = EDGE
              SHARE = NO
            INIT = IOPORT(1) LOC(3-0) 0011

        CHOICE = "IRQ 10, trigger:edge, unshared"
          SUBTYPE = "IRQA"
            LINK
              IRQ = 10
                TRIGGER = EDGE
                SHARE = NO
              INIT = IOPORT(1) LOC(3-0) 0101

        CHOICE = "IRQ 11, trigger:edge, unshared"
          SUBTYPE = "IRQB"
            LINK
              IRQ = 11
                TRIGGER = EDGE
                SHARE = NO
              INIT = IOPORT(1) LOC(3-0) 0111

        CHOICE = "IRQ  5, trigger:level, shared"
          SUBTYPE = "IRQ5"
            LINK
              IRQ = 5
                TRIGGER = LEVEL
                SHARE = YES
              INIT = IOPORT(1) LOC(3-0) 1000

        CHOICE = "IRQ 9, trigger:level, shared"
          SUBTYPE = "IRQ9"
            LINK
              IRQ = 9
                TRIGGER = LEVEL
                SHARE = YES
              INIT = IOPORT(1) LOC(3-0) 1010

        CHOICE = "IRQ 10, trigger:level, shared"
          SUBTYPE = "IRQA"
            LINK
              IRQ = 10
                TRIGGER = LEVEL
                SHARE = YES
              INIT = IOPORT(1) LOC(3-0) 1100

         CHOICE = "IRQ 11, trigger:level, shared"
           SUBTYPE = "IRQB"
             LINK
               IRQ = 11
                 TRIGGER = LEVEL
                 SHARE = YES
               INIT = IOPORT(1) LOC(3-0) 1110

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

ENDGROUP
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
GROUP = "Ethernet Cable Selection"

   ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
   FUNCTION = "eMASTER+ Connector"
      COMMENTS = "The eMASTER+ EISA provides connectors for the following
                  cable types: Thin (10BASE-2) and Thick (10BASE-5).  Select
                  the connector and cable type that you will be using."
      HELP = "none available"
      CONNECTION = "\tuse BOTTOM connector (BNC) for THIN cable\n
                    \tuse TOP connector (AUI) for THICK cable"

        CHOICE = "Thin Ethernet (10BASE-2)"
          FREE
            INIT = IOPORT(2) LOC(1-0) 00

        CHOICE = "Thick Ethernet (10BASE-5)"
          FREE
            INIT = IOPORT(2) LOC(1-0) 01

   ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

ENDGROUP
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;