BOARD
ID="CPQ0521"
NAME="Compaq DESKPRO XL System Board"
MFR="Compaq"
CATEGORY="SYS"
SLOT=EMB(0)
READID=YES
SIZING=0M
VERSION=1.2AH
REV=0

SYSTEM
NONVOLATILE=8192
AMPERAGE=20000
PCI_MEMORY=32M-544M
PCI_PORT=7000h-0FFFFh
SLOT(1)=EISA(1)           LABEL="Slot 1"
SLOT(2)=EISA(2)           LABEL="Slot 2"
SLOT(3)=EISA(3)           LABEL="Slot 3"
SLOT(4)=EISA-PCI(4,0,14)  LABEL="Slot 4"
SLOT(5)=PCI(0,13)         LABEL="Slot 5"
SLOT(6)=OTHER(11),"P1"    LABEL="Proc"

MEMORY=640K  ADDRESS=0K   CACHE=YES STEP=128K
MEMORY=256K  ADDRESS=640K CACHE=NO
MEMORY=1023M ADDRESS=896K CACHE=YES STEP=128K

SWITCH(1)=6
NAME="SWITCH"
STYPE=DIP
REVERSE=YES
VERTICAL=NO
FACTORY=LOC(1-6)000000 
INITVAL=LOC(1-6)000000
COMMENTS="Switch Positions:
\n1 -  OFF=Disable ROM flash ability,
\n     ON =Enable ROM flash ability.
\n2 -  OFF=Unlock EISA Configuration,
\n     ON =Lock EISA Configuration.
\n3 -  OFF=Floppy write enabled,
\n     ON =Floppy write disabled.
\n4 -  OFF=Floppy boot control dependent on configuration selection,
\n     ON =Floppy boot enabled (configuration selection override).
\n5 -  OFF=User password override disabled,
\n     ON =User password override enabled.
\n6 -  OFF=Retain EISA configuration,
\n     ON =Erase EISA configuration on boot."


INCLUDE="CPQSYS04.OVL"
BEGINOVL

;os
;INCLUDE="CPQOS.CMN"
INCLUDE="CPQOS4.CMN"

;sid
FUNCTION="System Identification Number"
CHOICE="None"
CHOICE=""

;floppy
GROUP="Integrated Diskette Controller"
INCLUDE="CPQFPY.CMN"
INCLUDE="CPQFPSP2.CMN"
ENDGROUP

;fdisk
GROUP="Integrated Fixed Disk Controller"
INCLUDE="CPQDKIF.CMN"
INCLUDE="CPQIDECD.CMN"
INCLUDE="CPQLS120.CMN"
FUNCTION="Drive Type - Unit 1"
COMMENTS="\nCAUTION: The attached disk drive type was automatically
determined.  This selection may be changed, but selecting the wrong
drive type will cause improper operation of the fixed disk.\n\n"
TYPE="MSD,UNIT0,DSKDRV"
INCLUDE="CPQDKTYP.CMN"
FUNCTION="Drive Type - Unit 2"
COMMENTS="\nCAUTION: The attached disk drive type was automatically
determined.  This selection may be changed, but selecting the wrong
drive type will cause improper operation of the fixed disk.\n\n"
TYPE="MSD,UNIT1,DSKDRV"
INCLUDE="CPQDKTYP.CMN"
INCLUDE="CPQSOFT.CMN"
ENDGROUP

;memory
FUNCTION="System ROM" SHOW=NO
CHOICE=""
GROUP="Compaq Memory"
TYPE="MEM;Compaq"
FUNCTION="Base Memory"
RESOURCE="MEMORY",UNIQUE
CHOICE="640 Kbytes, Linear"
HELP="This choice contiguously maps memory so that Compaq Built-In Memory is 
not available at FA0000, but is instead added into extended memory.  The 
previously reserved memory area at FE0000 is now available for use by 
additional memory.  If your applications do not support this memory 
configuration, reconfigure your system as 640K Compaq Compatible."
FREE
MEMORY=640K             ADDRESS=0K       CACHE=WRITEBACK

FUNCTION="Extended Memory (1MB-16MB)"
CHOICE="Extended Memory Installed"
TOTALMEM=0M-15M STEP=1024K 
HELP="This function will map memory in the extended memory
range below 16 megabytes." 
SUBCHOICE
FREE
MEMBER="MEMORY","LINEAR"
MEMORY=7M | 11M | 13M | 14M | 15M ADDRESS=1M      CACHE=WRITEBACK

FUNCTION="Extended Memory (16MB-512MB)"
CHOICE="Extended Memory Installed"
TOTALMEM=0M-496M STEP=1024K 
HELP="This function will map memory in the extended memory
range above 16 megabytes." 
SUBCHOICE
FREE
MEMBER="MEMORY","LINEAR"
MEMORY=0M-48M STEP=1024K ADDRESS=16M         CACHE=WRITEBACK
MEMORY=0M-64M STEP=1024K ADDRESS=64M         CACHE=WRITEBACK
MEMORY=0M-64M STEP=1024K ADDRESS=128M        CACHE=WRITEBACK
MEMORY=0M-64M STEP=1024K ADDRESS=192M        CACHE=WRITEBACK
MEMORY=0M-64M STEP=1024K ADDRESS=256M        CACHE=WRITEBACK
MEMORY=0M-64M STEP=1024K ADDRESS=320M        CACHE=WRITEBACK
MEMORY=0M-64M STEP=1024K ADDRESS=384M        CACHE=WRITEBACK
MEMORY=0M-64M STEP=1024K ADDRESS=448M        CACHE=WRITEBACK




FUNCTION="Extended Memory (512MB-1024MB)"
CHOICE="Extended Memory Installed"
TOTALMEM=0M-512M  STEP=1024K
HELP="This function will map memory in the super extended memory
range above 512 megabytes." 
SUBCHOICE
FREE         
MEMORY=0M-64M STEP=1024K ADDRESS=512M        CACHE=WRITEBACK
MEMORY=0M-64M STEP=1024K ADDRESS=576M        CACHE=WRITEBACK
MEMORY=0M-64M STEP=1024K ADDRESS=640M        CACHE=WRITEBACK
MEMORY=0M-64M STEP=1024K ADDRESS=704M        CACHE=WRITEBACK
MEMORY=0M-64M STEP=1024K ADDRESS=768M        CACHE=WRITEBACK
MEMORY=0M-64M STEP=1024K ADDRESS=832M        CACHE=WRITEBACK
MEMORY=0M-64M STEP=1024K ADDRESS=896M        CACHE=WRITEBACK
MEMORY=0M-64M STEP=1024K ADDRESS=960M        CACHE=WRITEBACK


FUNCTION="Total Memory"
CHOICE=""
ENDGROUP

FUNCTION="Integrated SCSI BIOS"
COMMENTS="(C) Copyright 1993-1994 by Sequoia Advanced Technologies, Inc. and
Advanced Micro Devices, Inc.
\n\nAll Rights Reserved."
TYPE="MSD,SCSI,AMD"
CHOICE="Enabled"
FREE
MEMORY=16K
ADDRESS=0C8000h-0E0000h STEP=4000h
CACHE=YES MEMTYPE=OTH WRITABLE=NO

;security
INCLUDE="CPQSEC4.CMN"

GROUP="Power-on Features"
FUNCTION="Diskette boot control"
HELP="This feature enables and disables system start-up
from the diskette drive.  Disabling diskette boot
prevents the drive from being used to start the computer.
The diskette drive, however, remains active for all
other transactions such as reading or writing to a diskette."
CHOICE="Enable Floppy Boot"
CHOICE="Disable Floppy Boot"
FUNCTION="Diskette write control"
HELP="This feature enables and disables writing to
the diskette drive.  Setting this feature to 'read
only' will not allow writes to the diskette drive.
Setting this feature to 'read and write' will allow
normal operation of the diskette drive."
CHOICE="Read and write"
FREE
INIT=PORTADR(00C94h) 00000011
INIT=PORTADR(00C98h) rrrr1rrr
CHOICE="Read only"
FREE
INIT=PORTADR(00C94h) 00000011
INIT=PORTADR(00C98h) rrrr0rrr
FUNCTION="ROM POST Speed Up"
HELP="This feature enables and disables the system start-up memory
count.  When enabled, the Power On Self Test procedure (POST) will skip
the memory test."
CHOICE="Enabled"
SUBTYPE="CMOS=2D1010"
CHOICE="Disabled"
SUBTYPE="CMOS=2D1000"
ENDGROUP

;Safe Start
;GROUP="Safe Start"
;FUNCTION="Safe Start Enable"
;CHOICE="Enabled"
;CHOICE="Disabled"
;ENDGROUP

;Power Management
INCLUDE="CPQPWR.CMN"

;integrated i/f
GROUP="Integrated Interfaces"
INCLUDE="CPQSER2M.CMN"
INCLUDE="CPQPAR1S.CMN"
INCLUDE="CPQPNTR.CMN"
ENDGROUP

;integrated vga
;none

INCLUDE="CPQDSP2.CMN"

;adv features
INCLUDE="CPQFEATB.CMN"

;PCIMaster Enable
GROUP=" "
FUNCTION="PCI Master Enable"
 SHOW=EXP
 TYPE=" "
 CHOICE="Disabled"
   SUBTYPE=" "
 CHOICE="Enabled"
   SUBTYPE="OTH,SMEB"
ENDGROUP


ENDOVL

INCLUDE="CPQMSSND.CMN"

IOPORT(110)=0C94h  INITVAL=000000xx
IOPORT(111)=0C9Ah  INITVAL=rrrxrrrr
IOPORT(112)=0C6Dh INITVAL=rrrxxxrr
FUNCTION="" SHOW=NO CHOICE=""
LINK
INIT=IOPORT(110)LOC(1 0)11
INIT=IOPORT(111)LOC(4)0
INIT=IOPORT(112)LOC(4-2)101

FUNCTION="EISA Reserved" SHOW=NO CHOICE=""
LINK
PORT=5C80h-5C83h
PORT=6C80h-6C83h
PORT=7C80h-7C83h
PORT=8C80h-8C83h
PORT=9C80h-9C83h
PORT=0AC80h-0AC83h
PORT=0BC80h-0BC83h
PORT=0CC80h-0CC83h
PORT=0DC80h-0DC83h
PORT=0EC80h-0EC83h
PORT=0FC80h-0FC83h

FUNCTION="Processor Control" SHOW=NO CHOICE=""
FREE
MEMORY=1K ADDRESS=80C00000h MEMTYPE=VIR SIZE=DWORD CACHE=NO
FREE
IRQ=13 SHARE="SYSIRQA"

GROUP="System Information"
TYPE="ISA" 
FUNCTION="Slot Mapping Information" SHOW=NO CHOICE="Slot Mapping Tables"
SUBTYPE="MAP"
FREEFORM=30,61h,62h,63h,64h,85h,0E0h,0E0h,0E0h,0E0h,0E0h,86h,0E0h,0E0h,
0E0h,0E0h,1,2,3,4,0,0,0,0,0,0,0,0,0,0,0
FUNCTION="PCI Slot Mapping Information" SHOW=NO CHOICE="PCI Slot Mapping Tables"
SUBTYPE="PCIMAP"
FREEFORM=06,04h,00h,070h,05h,00h,068h
ENDGROUP