;
;   Cubix  BC5055 PENTIUM EISA  64-Bit System Board
;
;   (C)Copyright Cubix, INC.  1994
;      All Rights Reserved.
;
;   08/21/95 v1.7
BOARD
	ID="CUB5055"
	NAME = "Cubix PENTIUM EISA 64-Bit System Board"
	MFR = "Cubix, Inc."
	CATEGORY = "SYS"
	AMPERAGE = 60000
	SLOT=EMB(0)
	READID=YES
	COMMENTS = "
	   This is a Hi-Performance EISA PENTIUM 64-Bit
	   System Board from Cubix, Inc., Carson City,
	   Nv. It has 256KB  of external
	   direct-mapped write-back Cache."

	HELP="
	   This is the main board configuration
	   help field for the Cubix PENTIUM EISA BUS CONTROLLER"

SYSTEM
	NONVOLATILE=8192
	AMPERAGE = 6000
	SLOT(1)=EISA
		LENGTH=341
		BUSMASTER=YES
	SLOT(2)=EISA
		LENGTH=341
		BUSMASTER=YES
	SLOT(3)=EISA
		LENGTH=341
		BUSMASTER=YES
	SLOT(4)=EISA
		LENGTH=341
		BUSMASTER=YES
	SLOT(5)=EISA
		LENGTH=341
		BUSMASTER=YES
	SLOT(6)=EISA
		LENGTH=341
		BUSMASTER=YES
	SLOT(7)=EISA
		LENGTH=341
		BUSMASTER=NO
	SLOT(8)=EISA
		LENGTH=341
		BUSMASTER=NO
	SLOT(9)=ISA8
		LENGTH=341
		BUSMASTER=NO
	SLOT(10)=ISA8
		LENGTH=341
		BUSMASTER=NO
	SLOT(11)=ISA8
		LENGTH=341
		BUSMASTER=NO
	SLOT(12)=ISA8
		LENGTH=341
		BUSMASTER=NO
	SLOT(13)=ISA8
		LENGTH=341
		BUSMASTER=NO
	SLOT(14)=ISA8
		LENGTH=341
		BUSMASTER=NO
	SLOT(15)=ISA8
		LENGTH=341
		BUSMASTER=NO

	MEMORY=640K     ADDRESS = 0     CACHE = YES STEP = 64K
	MEMORY=192M     ADDRESS = 1M    CACHE = YES STEP = 64k


;SYSTEM BOARD RESOURCES

GROUP="Basic Main Board Functions"
	TYPE="SYS"

FUNCTION = "PCI BUS INTERRUPT"
  CHOICE = "IRQ 11 COMMITTED TO PCI BUS"
    LINK
      IRQ = 11

FUNCTION = "ON BOARD ETHERNET CONTROLLER"
  CHOICE = "ENABLED IN CMOS SETUP"
    LINK
      IRQ = 5
  CHOICE = "DISABLED IN CMOS SETUP"

FUNCTION = "Floppy Subsystem"
  TYPE = "DSK"
  CHOICE = "Primary Floppy"
    LINK    
      IRQ = 6
      PORT = 03F0h-03F7h

  CHOICE = "Disabled in CMOS Setup"

FUNCTION = "IDE Hard Drive Subsystem"
  TYPE = "DSK"
  CHOICE = "PRIMARY IDE DRIVE "
     LINK
       IRQ = 14
       PORT = 01F0H-01F7H
  CHOICE = "Disabled in CMOS Setup "

FUNCTION = "UART 1 OF SUPER I/O ASSIGNMENT"
   TYPE = "COM"
   CHOICE = "ASSIGNED AS COM1"
      LINK
	 IRQ = 4
	 PORT = 03F8H-03FFH
   CHOICE = "ASSIGNED AS COM3"
      LINK
	 IRQ = 4
	 PORT = 03E8H-03EFH
   CHOICE = "DISABLED in CMOS Setup"

FUNCTION = "UART 2 OF SUPER I/O ASSIGNMENT"
   TYPE = "COM"
   CHOICE = "ASSIGNED AS COM2"
      LINK
	 IRQ = 3
	 PORT = 02F8H-02FFH

   CHOICE = "ASSIGNED AS COM4"
      LINK
	 IRQ = 3
	 PORT = 02E8H-02EFH

   CHOICE = "DISABLED in CMOS Setup"

FUNCTION = "SUPER I/O PARALLEL PORT ASSIGNMENT"
   TYPE = "COM"
   CHOICE = "ASSIGNED AS 03BCH"
      LINK
	 IRQ = 7
	 PORT = 03BCH-03BEH
   CHOICE = "ASSIGNED AS 0278H"
      LINK
	 IRQ = 7
	 PORT = 0278H-027AH
   CHOICE = "ASSIGNED AS 378H"
      LINK
	 IRQ = 7
	 PORT = 0378H-037AH
   CHOICE = "Disabled in CMOS Setup"

FUNCTION = "PS/2 MOUSE Subsystem"

    CHOICE = "S2-3 ON..MOUSE IRQ12 ENABLED"
	LINK
		IRQ = 12

    CHOICE = "S2-3 OFF..MOUSE DISABLED"

FUNCTION = "IES INTERRUPT"
   CHOICE = "DISABLED, S2-1,2 OFF"
   CHOICE = "INT15, S2-2 ON"
     LINK
	IRQ = 15
   CHOICE = "INT10, S2-1 ON"
     LINK
	IRQ = 10

FUNCTION="SuperVGA Subsystem"
 TYPE="VID"
 CHOICE = "VGA ALWAYS ENABLED"
      LINK
	    PORT=03C0h-03CFh
	    PORT=03D0h-03DFh
      LINK
	    MEMORY=64K
	    ADDRESS=0A0000h
	    MEMTYPE=OTH
      LINK
	    MEMORY=32K
	    ADDRESS=0B0000h
	    MEMTYPE=OTH
      LINK
	    MEMORY=32K 
	    ADDRESS=0B8000h
	    MEMTYPE=OTH
      LINK
	    MEMORY=32K
	    ADDRESS=0C0000h
	    MEMTYPE=OTH
	    WRITABLE=NO

FUNCTION = "IES Status Port"
      CHOICE = "Always Enabled"
	LINK
	    PORT = 03A0H

FUNCTION = "IES SERIAL Port"
      CHOICE = "Always Enabled"
	LINK
	    PORT = 3A8H-3AFH

ENDGROUP


GROUP="System Board Memory Functions"

FUNCTION="System Board Base Memory"
	TYPE="MEM"
	COMMENTS="Always present"
	HELP="Always present"

	CHOICE="System Board Base Memory"
		LINK
		MEMORY=640K
			ADDRESS=0K
			WRITABLE=YES
			MEMTYPE=SYS
			CACHE=YES


FUNCTION = "Extended  Memory"
    TYPE = "MEM"
    HELP = "The amount of installed RAM for use as extended memory is
	    user-selectable.  Determine the amount of memory installed
	    on the BC5055 and then select the amount to be used as
	    extended memory in the following choices. If there is more
	    than 64MB you must make a selection for memory above 64MB.
	    If there is more than 128MB you must make a selection for 
	    memory above 128MB."
    CHOICE = "You Choose: 7M - 63M by Pressing F6"              
	FREE                                      
	  MEMORY = 7M - 63M STEP = 8M           
	     ADDRESS = 1M
	     WRITABLE = YES
	     MEMTYPE = SYS
	     CACHE = YES

FUNCTION = "Extended  Memory above 64MB"
    TYPE = "MEM"
    HELP = "The amount of installed RAM for use as extended memory is
	    user-selectable.  Determine the amount of memory installed
	    on the BC5055 and then select the amount to be used as
	    extended memory in the following choices. If there is more
	    than 64MB you must make a selection for memory above 64MB.
	    If there is more than 128MB you must make a selection for 
	    memory above 128MB."
    CHOICE = "You Choose: 0M - 64M by Pressing F6"              
	FREE                                      
	  MEMORY =0M - 64M STEP = 8M           
	     ADDRESS = 64M
	     WRITABLE = YES
	     MEMTYPE = SYS
	     CACHE = YES

FUNCTION = "Extended  Memory above 128MB"
    TYPE = "MEM"
    HELP = "The amount of installed RAM for use as extended memory is
	    user-selectable.  Determine the amount of memory installed
	    on the BC5055 and then select the amount to be used as
	    extended memory in the following choices. If there is more
	    than 64MB you must make a selection for memory above 64MB.
	    If there is more than 128MB you must make a selection for 
	    memory above 128MB."
    CHOICE = "You Choose: 0M - 64M by Pressing F6"              
	FREE                                      
	  MEMORY =0M - 64M STEP = 8M           
	     ADDRESS = 128M
	     WRITABLE = YES
	     MEMTYPE = SYS
	     CACHE = YES


ENDGROUP