BOARD                   ;NEC 
 ID="DBT0001"
 NAME="NEC Multi-16 Board"
 MFR="NEC"
 CATEGORY="COM"
 SLOT=ISA16
 LENGTH=330
 COMMENTS="
 \nThe NEC Multi-16 board requires the use of device drivers 
   appropriate to your operating system for proper operation.  Refer to 
   documentaion for details.\n"
 HELP="
 Use the V)iew D)etail by Slot mode to see Configuration Options. Use
 E)dit Change R)esources to select parameters."
SWITCH (1)=11
 NAME="DS1"
 STYPE=DIP
 VERTICAL=NO
 REVERSE=YES
 LABEL=LOC(1-11) "SW1" "SW2" "SW3" "SW4" "SW5" "SW6" "SW7" "SW8" "SW9"
 "SW10" "SW11"
 COMMENTS = "Switches 1-8 select the dual port memory start address.\n  
	Switches 9-11 set the I/O Port address."
SWITCH (2)=8
 NAME="DS2"
 STYPE=DIP
 VERTICAL=NO
 REVERSE=YES
 LABEL=LOC(1-8) "SW1" "SW2" "SW3" "SW4" "SW5" "SW6" "SW7" "SW8"
 COMMENTS = "Interrupt (IRQ) Selection"
JUMPER(1) = 1
	JTYPE = TRIPOLE 
	NAME="J1"
	REVERSE = YES
	VERTICAL = YES
	LABEL=LOC(1) "1 2 3"
	INITVAL = LOC(1) 1
	COMMENTS= "Local Program Memory:  Jumper between 2-3 selects
		   16K of local Program memory.   This is the factory default.
		   Jumper between 1-2 selects 64K of local program memory."
SOFTWARE(1) ="
 The NEC Multi-16 board requires the installation of a device
 driver appropriate to your operating system. Refer to the
 DigiBoard documentation for details and configure using the following
 parameters:\n"

FUNCTION="MultiPort Communications"
 TYPE="COM"
 HELP="Use E)dit Change F)unction to Select Options.
 \n\nSelect the Desired Operating System to Obtain Selection of
 Valid Option Choices."
 SUBFUNCTION="UNIX, XENIX and SUN OS"
 COMMENTS = "The memory addresses are part of the Pre-Configured Options 
	     available for UNIX, XENIX and SUN OS."
 CHOICE="Adapter Options"
 LINK
 IRQ=3|4|5|7|
 10|11|12|15
 INIT=SWITCH(2) LOC (1-8)
 10000000|01000000|00100000|00010000|
 00001000|00000100|00000010|00000001
;00000001|00000010|00000100|00001000|
;00010000|00100000|01000000|10000000
 INIT=software(1)
 "IRQ 3"|"IRQ 4"|"IRQ 5"|"IRQ 7"|
 "IRQ 10"|"IRQ 11"| "IRQ 12"| "IRQ 15"

 LINK
 PORT= 0110h|0100h|0120h|0200h|
 0220h|0300h|0320h
 INIT=SWITCH(1) LOC (9-11)
 010|100|110|001|
 101|011|111
 ;010|001|011|100|
 ;101|110|111
 INIT=software(1)
 "I/O: 0110h"|"I/O: 0100h"|"I/O: 0120h"|
 "I/O: 0200h"|"I/O: 0220h"|"I/O: 0300h"|
 "I/O: 0320h"

 COMBINE
 MEMORY=64K
 ADDRESS= 0D80000h|0E00000h|0E80000h|0F00000h
 MEMTYPE=OTH
 INIT=SWITCH(1) LOC (1-8)
 11100100|11111000|11101000|11110000
;11110011|11110010|01011111|01010111|01001111|
;01000111|00100111|00011111|00010111|00001111
 INIT=software(1)
 "Mem: D80000h"|
 "Mem: E00000h"|
 "Mem: E80000h"|
 "Mem: F00000h"

 CHOICE="Not Selected"
	    

 SUBFUNCTION="PC-MOS/386"
 CHOICE="Not Selected"
	    
 CHOICE="Adapter Options"
 LINK
 IRQ = 3|4|5|7|
 10|11|12|15
 ;INIT=SWITCH(2) LOC (8-1)
 ;00000001|00000010|00000100|00001000|
 ;00010000|00100000|01000000|10000000
 INIT=SWITCH(2) LOC (1-8)
 10000000|01000000|00100000|00010000|
 00001000|00000100|00000010|00000001
 INIT=software(1)
 "IRQ 3"|"IRQ 4"|"IRQ 5"|"IRQ 7"|
 "IRQ 10"|"IRQ 11"| "IRQ 12"| "IRQ 15"

 LINK
 PORT= 0110h|0100h|0120h|0200h|
 0220h|0300h|0320h
 ;INIT=SWITCH(1) LOC (11-9)
 ;010|001|011|100|
 ;101|110|111
 INIT=SWITCH(1) LOC (9-11)
 010|100|110|001|
 101|011|111 
INIT=software(1)
 "I/O: 0110h"|"I/O: 0100h"|"I/O: 0120h"|
 "I/O: 0200h"|"I/O: 0220h"|"I/O: 0300h"|
 "I/O: 0320h"

 COMBINE
 MEMORY=64K
 ADDRESS= 0F80000h|0FA0000h|0FC0000h
 MEMTYPE=OTH
  INIT=SWITCH(1) LOC (1-8)
 11100000|10100000|11000000
 INIT=software(1)
 "Mem: F80000h"|
 "Mem: FA0000h"|
 "Mem: FC0000h"

 SUBFUNCTION="MS-DOS"
 CHOICE="Not Selected"
	    
 CHOICE="Adapter Options"
 LINK
 IRQ = 3|4|5|7|
 10|11|12|15
  INIT=SWITCH(2) LOC (1-8)
 10000000|01000000|00100000|00010000|
 00001000|00000100|00000010|00000001
 INIT=software(1)
 "IRQ 3"|"IRQ 4"|"IRQ 5"|"IRQ 7"|
 "IRQ 10"|"IRQ 11"| "IRQ 12"| "IRQ 15"

 LINK
 PORT= 0110h|0100h|0120h|0200h|
 0220h|0300h|0320h
  INIT=SWITCH(1) LOC (9-11)
 010|100|110|001|
 101|011|111
 INIT=software(1)
 "I/O: 0110h"|"I/O: 0100h"|"I/O: 0120h"|
 "I/O: 0200h"|"I/O: 0220h"|"I/O: 0300h"|
 "I/O: 0320h"

 COMBINE
 MEMORY=64K
 ADDRESS= 0C0000h|0D0000h
 MEMTYPE=OTH
  INIT=SWITCH(1) LOC (1-8)
  11001111|01001111
 INIT=software(1)
 "Mem: 0C0000h"|
 "Mem: 0D0000h"