;
;   DECpc MTE Series System Board
;
BOARD
  ID="DEC1031"
  NAME="DECpc MTE Series System Board"
  MFR="Digital Equipment Corporation"
  CATEGORY="SYS"
  SLOT=EMB(0)
  READID=YES
  COMMENTS="This is the DECpc MTE Series System Board with one VL-BUS\n
	    expansion slot dedicated for DEC 86C805/86C928 Video adapter,\n
	    five EISA expansion slots (slot 2-6), and one EISA or VL-BUS\n
	    interleaved slot (slot 1).  This system board contains the \n
	    following on-board features:\n
	    \t1) Internal and External Cache Control,\n
	    \t2) Shadow RAM Control,\n
	    \t3) One Parallel Port,\n
	    \t4) Two Serial Ports,\n
	    \t5) Onboard Floppy Controller, \n
	    \t6) Onboard IDE Hard Disk Controller, \n
	    \t7) Onboard mouse/keyboard interface."
HELP="This is the base module configuration options file.  The user
      should review and configure selectable options per system resources."

SYSTEM
  NONVOLATILE = 8K
  AMPERAGE = 13200
  SLOT(1)  = EISA  LENGTH = 341 BUSMASTER = YES
  SLOT(2)  = EISA  LENGTH = 341 BUSMASTER = YES
  SLOT(3)  = EISA  LENGTH = 341 BUSMASTER = YES
  SLOT(4)  = EISA  LENGTH = 341 BUSMASTER = YES
  SLOT(5)  = EISA  LENGTH = 341 BUSMASTER = YES
  SLOT(6)  = EISA  LENGTH = 341 BUSMASTER = YES

  MEMORY=128M ADDRESS=0K      CACHE=YES
    STEP=128K

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

JUMPER(1)  = 2
  NAME     = "PARALLEL PORT - J20"
  JTYPE    = INLINE
  VERTICAL = NO
  REVERSE  = YES
  LABEL    = LOC(1^2 2^3) "STD" "" 
  FACTORY  = LOC(1^2 2^3) 10
  INITVAL  = LOC(1^2 2^3) 10
  COMMENTS = "Parallel Port : Standard / Bidirectional.
	      J20 is functional for 87C311 only.
	      When 87C312 is used, this jumper will be ignored."

JUMPER(2)  = 1
  NAME     = "FACTORY TEST - J23"
  JTYPE    = INLINE
  VERTICAL = NO
  REVERSE  = NO
  LABEL    = LOC(2^1) "NML" 
  FACTORY  = LOC(2^1) 0
  INITVAL  = LOC(2^1) 0
  COMMENTS = "Factory Test : Normal Mode / Factory Test & Remove Password Mode."


JUMPER(3)  = 1
  NAME     = "VIDEO DISPLAY - J25"
  JTYPE    = INLINE
  VERTICAL = NO
  REVERSE  = NO
  LABEL    = LOC(2^1) "MONO" 
  FACTORY  = LOC(2^1) 0
  INITVAL  = LOC(2^1) 0
  COMMENTS = "Video Display Type: Color Monitor / Mono Monitor."


JUMPER(4)  = 1
  NAME     = "BIOS UPGRADE - J43"
  JTYPE    = INLINE
  VERTICAL = NO
  REVERSE  = NO
  LABEL    = LOC(2^1) "ENA"
  FACTORY  = LOC(2^1) 1
  INITVAL  = LOC(2^1) 1
  COMMENTS = "BIOS Upgrade : Enable / Disable."


JUMPER(5)  = 1
  NAME     = "RESET SWITCH - J46"
  JTYPE    = INLINE
  VERTICAL = NO
  REVERSE  = NO
  LABEL    = LOC(2^1) "ENA"
  FACTORY  = LOC(2^1) 1
  INITVAL  = LOC(2^1) 1
  COMMENTS = "Reset Switch : Enable / Disable."


JUMPER(6)  = 2
  NAME     = "VL-BUS WRITE - J51"
  JTYPE    = INLINE
  VERTICAL = NO
  REVERSE  = YES
  LABEL    = LOC(1^2 2^3) "" "ONE"
  FACTORY  = LOC(1^2 2^3) 01
  INITVAL  = LOC(1^2 2^3) 01
  COMMENTS = "VL-BUS Write : 0 Wait State / 1 Wait State."


JUMPER(7)  = 2
  NAME     = "CPU SELECT - J52"
  JTYPE    = INLINE
  VERTICAL = NO
  REVERSE  = YES
  LABEL    = LOC(1^2 2^3) "" "486"
  FACTORY  = LOC(1^2 2^3) 01
  INITVAL  = LOC(1^2 2^3) 01
  COMMENTS = "CPU Select : P24T / 486DX or DX2."

JUMPER(8)  = 1
  NAME     = "RECOVERY MODE - J53"
  JTYPE    = INLINE
  VERTICAL = NO
  REVERSE  = NO
  LABEL    = LOC(2^1) "NML"
  FACTORY  = LOC(2^1) 0
  INITVAL  = LOC(2^1) 0
  COMMENTS = "Recovery Mode :  Recovery / Normal."


JUMPER(9)  = 8
  NAME     = "CACHE SIZE:J29-J31"
  JTYPE    = INLINE
  VERTICAL = NO
  REVERSE  = NO
  COMMENTS = "See your User's Guide for information on setting the cache
	      size jumpers (J29, J30, J31)."

JUMPER(10)  = 7
  NAME     = "CPU CLOCK:J34-J37"
  JTYPE    = INLINE
  VERTICAL = NO
  REVERSE  = NO
  COMMENTS = "See your User's Guide for information on setting the CPU
	      clock input jumpers (J34, J35, J36, J37)."

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Include cfg file extension (overlay)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
INCLUDE = "DEC1031.OVL"