;-------------------------------------
; HEADLAND VGA 208e Adapter
;-------------------------------------

BOARD
	ID = "HDL0010"
	NAME = "VGA 208e ADAPTER"
	MFR = "HEADLAND"
	CATEGORY = "VID"
	SLOT = ISA16
	LENGTH = 202
	READID = NO
	IOCHECK = INVALID
	DISABLE = UNSUPPORTED
JUMPER(1) = 1
	NAME = "Irq2 Use"
	JTYPE = TRIPOLE
	VERTICAL = YES
	FACTORY = LOC(1) 0
JUMPER(2) = 1
	NAME = "Rom Decode"
	JTYPE = TRIPOLE
	VERTICAL = YES
	FACTORY = LOC(1) 1
SWITCH(3) = 8
	NAME = "Switch Block"
	STYPE = DIP
	VERTICAL = YES
	REVERSE = NO
	LABEL = LOC(8-1) "VGA Ext." "Aut. M Sse" "8/16 Rom" "En. Emul." "Mem Cach." "Not Used" "Not Used" "Not Used"
	INITVAL = LOC(8-1) xxxxx111
	FACTORY = LOC(8-1) 11111111
FUNCTION = "Video Adapter"
	TYPE = "VID,VGA"
	CONNECTION = "Back Board Connector=Video, Top Connector=VGA Feature"
	SUBFUNCTION = "Adapter RAM"
		CHOICE = "16 bit RAM ACCESS"
			FREE
				PORT = 3B0h-3BBh
				PORT = 3C0h-3DFh
					SHARE = NO
				MEMORY = 128K
					ADDRESS = 0A0000H
					MEMTYPE = OTH
					SIZE = WORD
					CACHE = NO
					SHARE = NO
				INIT = SWITCH(3) LOC(7) 1
		CHOICE = "8 bit RAM ACCESS"
			FREE
				PORT = 3B0h-3BBh
				PORT = 3C0h-3DFh
					SHARE = NO
				MEMORY = 128K
					ADDRESS = 0A0000H
					MEMTYPE = OTH
					SIZE = BYTE
					CACHE = NO
					SHARE = NO
				INIT = SWITCH(3) LOC(7) 0
	SUBFUNCTION = "Adapter ROM"
		CHOICE = "16 bit ROM ACCESS"
			LINK
				MEMORY = 32K | 128K
					ADDRESS = 0C0000H | 0C0000H
					MEMTYPE = OTH 
					SIZE = WORD      
					CACHE = YES 
					SHARE = NO 
				INIT = JUMPER(2) LOC(1) 1 | 0
			FREE    
				INIT = SWITCH(3) LOC(6) 1
		CHOICE = "8 bit ROM ACCESS"
			LINK   
				MEMORY = 32K | 128K
					ADDRESS = 0C0000H | 0C0000H
					MEMTYPE = OTH
					SIZE = BYTE
					CACHE = YES
					SHARE = NO
				INIT = JUMPER(2) LOC(1) 1 | 0
			FREE    
				INIT = SWITCH(3) LOC(6) 0
	SUBFUNCTION = "IRQ SELECT"
		CHOICE = "IRQ2 DISABLE"
			DISABLE = YES
			FREE
				INIT = JUMPER(1) LOC(1) 0
		CHOICE = "IRQ2 ENABLE"
			FREE
				IRQ = 2
					SHARE = NO
					TRIGGER = EDGE
				INIT = JUMPER(1) LOC(1) 1
	SUBFUNCTION = "CGA AND HGC EMULATION MODE"
		CHOICE = "EMULATION ENABLED"
		   FREE
			INIT = SWITCH(3) LOC(5) 1
		CHOICE = "EMULATION DISABLED"
		   FREE
			INIT = SWITCH(3) LOC(5) 0
	SUBFUNCTION = "VGA PURE MODE"
		CHOICE = "VGA 208e EXTENSIONS ENABLED"
		   FREE
			INIT = SWITCH(3) LOC(8) 1
		CHOICE = "VGA MODE ONLY"
		   FREE
			INIT = SWITCH(3) LOC(8) 0
	SUBFUNCTION = "MEMORING CACHING FEATURE"
		CHOICE = "CACHING ENABLED"
		   FREE
			INIT = SWITCH(3) LOC(4) 1
		CHOICE = "CACHING DISABLED"
		   FREE
			INIT = SWITCH(3) LOC(4) 0