; ; (C)Copyright Hewlett-Packard Co., 1989-1990 ; All Rights Reserved. ; BOARD ID = "HWP0040" NAME = "HP VGA Adapter Board (D1180A)" MFR = "Hewlett-Packard Co." CATEGORY = "VID" SLOT = isa8or16 LENGTH = 225 ; 9.3 in. AMPERAGE = 1800 ; in milliamps COMMENTS = "The HP VGA Adapter board is compatible with IBM VGA and provides the additional capabilities of EGA, CGA, and Hercules boards. If you have an HP Vectra 286, 386, or 486 (AT compatible) machine, be sure to install this board in a slot that is 16-bit or larger." SWITCH(1) = 4 NAME = "SWITCH BLOCK 1" STYPE = DIP REVERSE = YES LABEL = LOC(4-1) "SW4" "SW3" "SW2" "SW1" FACTORY = LOC(4-1) 0000 GROUP = "" TYPE = "VID" FUNCTION = "Single/Dual Display Option" TYPE = "VGA" CONNECTION = "15-pin, female, D-type connector" HELP = "You can use two HP VGA Adapter boards (with one configured for monochrome and the other for color) or one HP VGA Adapter and one MDA (monochrome or Hercules display) board.\n\n Some applications support two monitors.\n\nSelecting 'single' display lets you use either a color or a monochrome display with your computer. Selecting 'dual' display lets you use both and also provides automatic use of either one as required by your application." CHOICE = "Single display" SUBCHOICE LINK MEMORY = 128K ADDRESS = 0A0000h MEMTYPE = OTHER SHARE = "HPVGA" LINK PORT = 03B0h - 03BFh SHARE = "HPVGA" PORT = 03C0h - 03CFh PORT = 03D0h - 03DFh PORT = 046E8h SHARE = "HPVGA" INIT = SWITCH(1) LOC(3) 0 CHOICE = "Dual display" SUBCHOICE LINK MEMORY = 32K ADDRESS = 0B0000h MEMTYPE = OTHER SHARE = "HPVGA" LINK PORT = 03B0h - 03BFh SHARE = "HPVGA" PORT = 046E8h SHARE = "HPVGA" INIT = SWITCH(1) LOC(3) 1 SUBCHOICE LINK PORT = 03C0h - 03DFh LINK MEMORY = 64K ADDRESS = 0A0000h MEMTYPE = OTHER LINK MEMORY = 32K ADDRESS = 0B8000h MEMTYPE = OTHER LINK INIT = SWITCH(1) LOC(3) 0 PORT = 046E8h FUNCTION = "SPU Option Setting" TYPE = "VID" HELP = "The SPU option setting specifies the type of computer that your HP VGA Adapter board is installed in. \n\nREC = Recommended SUPP = Supported \n\n| OPTION SETTING | \n| SPU | 1 | 2 | 3 | \n|------+------+------+------+ \n| CS | REC | NOT | NOT | \n| | | SUPP | SUPP | \n|------+------+------+------+ \n| ES | SUPP | NOT | REC | \n| | | SUPP | | \n|------+------+------+------+ \n| ES/ | SUPP | NOT | REC | \n| 12 | | SUPP | | \n|------+------+------+------+ \n| RS | SUPP | REC | SUPP | \n|------+------+------+------+ \n| 486 | SUPP | REC | SUPP |" CHOICE = "Option 1 ( 8-bit, for all HP Vectra personal computers)" HELP = "Option 1 is compatible with all HP Vectra and Vectra-compatible personal computers (and required for dual-display operations).\n\n Option 1 selects 8-bit operation. It uses memory locations C0000H through C7FFFH for the video BIOS, and can be used in either an 8-bit or 16-bit accessory slot." LINK MEMORY = 24k ADDRESS = 0C0000h WRITABLE = NO ;video BIOS ROM MEMTYPE = OTHER CACHE = YES SHARE = "HPVGA" LINK MEMORY = 6k ADDRESS = 0C6800h WRITABLE = NO ;video BIOS ROM MEMTYPE = OTHER CACHE = YES SHARE = "HPVGA" LINK INIT = SWITCH(1) LOC(2 1) 00 CHOICE = "Option 2 (16-bit, for HP Vectra 386 and 486 computers)" HELP = "Option 2 is compatible with advanced display features in HP Vectra 386 and 486 computers.\n\n Option 2 selects 16-bit operation and uses memory locations C0000H through C7FFFH for the video BIOS.\n\n Option 2 is not compatible with the original Vectra, Vectra CS, ES, and ES/12.\n\nOption 2 requires that the HP VGA Adapter board be in a 16-bit accessory slot." LINK MEMORY = 24k ADDRESS = 0C0000h WRITABLE = NO MEMTYPE = OTHER SIZE = WORD CACHE = YES SHARE = "HPVGA" LINK MEMORY = 6k ADDRESS = 0C6800h WRITABLE = NO MEMTYPE = OTHER SIZE = WORD CACHE = YES SHARE = "HPVGA" LINK INIT = SWITCH(1) LOC(2 1) 01 CHOICE = "Option 3 (16-bit, for HP Vectra ES and ES/12 only)" HELP = "Option 3 is compatible with advanced features in the HP Vectra ES and ES/12.\n\n Option 3 selects 16-bit display operation and uses memory locations E0000H through EFFFFH and C0000H through C0FFFH for the video BIOS.\n\n Option 3 requires that the HP VGA Adapter board be in a 16-bit accessory slot.\n\n Option 3 on the Vectra ES or ES/12 requires that SW1-C1 switch on the system board is switched to disabled (down). This switch disables system board option ROMs at E0000H." LINK MEMORY = 4k ADDRESS = 0C0000h WRITABLE= NO MEMTYPE = OTHER SIZE = WORD CACHE = YES SHARE = "HPVGA" LINK MEMORY = 64k ADDRESS = 0E0000h WRITABLE= NO MEMTYPE = OTHER SIZE = WORD CACHE = YES SHARE = "HPVGA" LINK INIT = SWITCH(1) LOC(2 1) 11 CHOICE = "Option 4 (Reserved)" LINK MEMORY = 128K ADDRESS = 0C0000h WRITABLE= NO MEMTYPE = OTHER SIZE = WORD CACHE = YES SHARE = "HPVGA" LINK INIT = SWITCH(1) LOC(2 1) 10 ENDGROUP