;
; (C)Copyright Hewlett-Packard Co., 1989-1990
;    All Rights Reserved.
;

BOARD
   ID       = "HWP1460"
   NAME     = "HP ScanJet Plus Interface (88290A)"
   MFR      = "Hewlett-Packard"
   CATEGORY = "COM"
   SLOT     = ISA8
   LENGTH   = 330

SWITCH(1) = 4
   NAME     = "Configuration Switch"
   STYPE    = DIP
   REVERSE  = YES
   FACTORY  = LOC(1-4) 0100
   LABEL    = LOC(1-4) "IOADD" "ADD14" "ADD15" "ADD16"
   COMMENTS = "
 Switch 1 determines the starting address of the I/O port.\n
 Switches 2, 3 and 4 determine the starting address of the
 I/O buffers."

JUMPER(1) = 2
   NAME    = "JMP1"
   JTYPE   = INLINE
   REVERSE = YES
   FACTORY = LOC(1^2 2^3) 10
   LABEL   = LOC(1^2 2^3) "IRQ5" "IRQ7"

FUNCTION = "Scanner"
   CHOICE = "I/O addresses"
      LINK
         PORT = 0278h - 027Fh | 0268h - 026Fh
         INIT = SWITCH(1) LOC(1) 0 | 1
      LINK
         MEMORY = 16k
         ADDRESS = 0C0000h | 0C4000h | 0C8000h | 0CC000h |
                   0D0000h | 0D4000h | 0D8000h | 0DC000h

         INIT    = SWITCH(1) LOC(2-4) 000 | 100 | 010 | 110 |
                                      001 | 101 | 011 | 111
      LINK
         IRQ  = 5 | 7
         INIT = JUMPER(1) LOC(1^2 2^3) 10 | 01