;EISA Configuration File for Leopard (Itchy) Board.
;Date : August 29, 1996.

;(1) Board Identification Block.
BOARD
        ID = "IBM1038"
        NAME = "IBM Dual Pentium Pro PCI-EISA System Board"
        MFR = "IBM"
        CATEGORY = "SYS"
        AMPERAGE = 8000
        SLOT=EMB(0)
        READID=YES
        COMMENTS = ""
        HELP = "Please read the help file for the individual catagories to
                configure this system."

;(2) System Description Block.
SYSTEM
;       NONVOLATILE=8126                ;8192 - 64 (for ISA) - 2 (header)
        NONVOLATILE=8062                ;8192 - 128 (for ISA) - 2 (header)
        AMPERAGE = 20000
        SLOT(1)=PCI(0, 15)
                LENGTH=341
                BUSMASTER=YES
        SLOT(2)=EISA - PCI(1, 0, 14)
                LENGTH=341
                BUSMASTER=YES
        SLOT(3)=EISA - PCI(2, 1, 8)
                LENGTH=341
                BUSMASTER=YES
        SLOT(4)=EISA - PCI(3, 1, 7)
                LENGTH=341
                BUSMASTER=YES
        SLOT(5)=EISA - PCI(4, 1, 6)
                LENGTH=341
                BUSMASTER=YES
        SLOT(6)=EISA(5)
                LENGTH=341
                BUSMASTER=YES
        SLOT(7)=EISA(6)
                LENGTH=168
                BUSMASTER=YES
        SLOT(8)=EISA(7)
                LENGTH=168
                BUSMASTER=YES
        SLOT(9)=EISA(8)
                LENGTH=168
                BUSMASTER=YES



;----------------------------------------------------------------------------
;Initialization Information Block - Jumpers
;----------------------------------------------------------------------------
    JUMPER(1) = 2
        NAME = "J12-Password Reset"
        JTYPE = INLINE          VERTICAL = YES          REVERSE = NO
        INITVAL = LOC(2^3) 1    FACTORY = LOC(1^2 2^3) 01
        COMMENTS =
        "Moving this jumper from one position to the other will reset
         the power-on password."
        HELP = "Consult the system board manual for more information on
                jumper settings."
    JUMPER(2) = 2
        NAME = "J22-Ethernet Enable"
        JTYPE = INLINE          VERTICAL = No           REVERSE = YES
        INITVAL = LOC(2^3) 1    FACTORY = LOC(1^2 2^3) 01
        COMMENTS =
        "This jumper enables the embedded ethernet controller.  Setting
         this jumper to position 1-2 will disable the embedded ethernet
         controller."
        HELP = "Consult the system board manual for more information on
                jumper settings."
    JUMPER(3) = 2
        NAME = "J25-Video Enable"
        JTYPE = INLINE          VERTICAL = NO           REVERSE = YES
        INITVAL = LOC(1^2) 1    FACTORY = LOC(1^2 2^3) 10
        COMMENTS =
        "This jumper enables the embedded video controller.  Setting
         this jumper to position 2-3 will disable the embedded video
         controller."
        HELP = "Consult the system board manual for more information on
                jumper settings."

    JUMPER(4) = 2
        NAME = "J30-SCSI Enable"
        JTYPE = INLINE          VERTICAL = NO           REVERSE = NO
        INITVAL = LOC(2^3) 1    FACTORY = LOC(1^2 2^3) 01
        COMMENTS =
        "This jumper enables the embedded SCSI controller.  Setting
         this jumper to position 1-2 will disable the embedded SCSI
         controller."
        HELP = "Consult the system board manual for more information on
                jumper settings."

    JUMPER(5) = 2
        NAME = "J38-Ext. SCSI Term."
        JTYPE = INLINE          VERTICAL = NO           REVERSE = NO
        INITVAL = LOC(2^3) 1    FACTORY = LOC(1^2 2^3) 01
        COMMENTS =
        "Jumper pins 2-3 when attaching a 16-bit external SCSI device or
         when no external device is present.  Jumper pins 1-2 when attaching
         an 8-bit external SCSI device."
        HELP = "Consult the system board manual for more information on
                jumper settings."

    JUMPER(6) = 2
        NAME = "J39-FLASH Enable"
        JTYPE = INLINE          VERTICAL = YES          REVERSE = NO
        INITVAL = LOC(1^2) 1    FACTORY = LOC(1^2 2^3) 10
        COMMENTS =
        "This jumper enables FLASH updating.  Setting this jumper to
         position 2-3 will disable FLASH updates."
        HELP = "Consult the system board manual for more information on
                jumper settings."

    JUMPER(7) = 2
        NAME = "J49-Sys. Management"
        JTYPE = INLINE          VERTICAL = NO           REVERSE = YES
        INITVAL = LOC(1^2) 1    FACTORY = LOC(1^2 2^3) 10
        COMMENTS =
        "Jumper pins 1-2 when the System Management Adapter is NOT
         installed.  Jumper pins 2-3 when the System Management Adapter
         is installed."
        HELP = "Consult the system board manual for more information on
                jumper settings."

    JUMPER(8) = 2
        NAME = "J33-Reserved"
        JTYPE = INLINE          VERTICAL = YES          REVERSE = NO
        INITVAL = LOC(2^3) 1    FACTORY = LOC(1^2 2^3) 01
        COMMENTS =
        "This jumper is reserved and should be installed on position 2-3."
        HELP = "Consult the system board manual for more information on
                jumper settings."

    JUMPER(9) = 1
        NAME = "J21-Reserved"
        JTYPE = INLINE          VERTICAL = YES          REVERSE = NO
        INITVAL = LOC(1^2) 0    FACTORY = LOC(1^2) 0
        COMMENTS =
        "This jumper is reserved and should not be installed."
        HELP = "Consult the system board manual for more information on
                jumper settings."

;-----------------------------------------------------------------------
;  The following jumpers are on the processor card and are common to both
;  systems.
;-----------------------------------------------------------------------

    JUMPER(10) = 1
        NAME = "J1-Clock Speed"
        JTYPE = INLINE          VERTICAL = YES          REVERSE = NO
        INITVAL = LOC(1^2) 1    FACTORY = LOC(1^2) 1
        COMMENTS =
        "This jumper is used with jumpers J17, J18 and J20 to select the
         base clock speed.  This jumper should be installed for 66.66Mhz
         and removed for 60Mhz."
        HELP = "Consult the system board manual for more information on
                jumper settings."

    JUMPER(11) = 1
        NAME = "J20-Clock Speed"
        JTYPE = INLINE          VERTICAL = YES          REVERSE = NO
        INITVAL = LOC(1^2) 0    FACTORY = LOC(1^2) 0
        COMMENTS =
        "This jumper is used with jumpers J17, J18 and J1 to select the
         base clock speed.  This jumper should be removed for 66.66Mhz
         and installed for 60Mhz."
        HELP = "Consult the system board manual for more information on
                jumper settings."

    JUMPER(12) = 1
        NAME = "J17-Clock Speed"
        JTYPE = INLINE          VERTICAL = NO           REVERSE = NO
        INITVAL = LOC(1^2) 0    FACTORY = LOC(1^2) 0
        COMMENTS =
        "This jumper is used with jumpers J20, J18 and J1 to select the
         base clock speed.  This jumper should be removed for 66.66Mhz
         and installed for 60Mhz."
        HELP = "Consult the system board manual for more information on
                jumper settings."

    JUMPER(13) = 1
        NAME = "J18-Clock Speed"
        JTYPE = INLINE          VERTICAL = NO           REVERSE = NO
        INITVAL = LOC(1^2) 1    FACTORY = LOC(1^2) 1
        COMMENTS =
        "This jumper is used with jumpers J17, J1 and J20 to select the
         base clock speed.  This jumper should be installed for 66.66Mhz
         and removed for 60Mhz."
        HELP = "Consult the system board manual for more information on
                jumper settings."

    JUMPER(14) = 1
        NAME = "J27-Frequency Select"
        JTYPE = INLINE          VERTICAL = NO           REVERSE = NO
        INITVAL = LOC(1^2) 1    FACTORY = LOC(1^2) 1
        COMMENTS =
        "This jumper is used with jumpers J28, J29 and J30 to select the
         processor core frequency.  This jumper should be installed for
         all frequencies."
        HELP = "Consult the system board manual for more information on
                jumper settings."

    JUMPER(15) = 1
        NAME = "J28-Frequency Select"
        JTYPE = INLINE          VERTICAL = NO           REVERSE = NO
        INITVAL = LOC(1^2) 1    FACTORY = LOC(1^2) 1
        COMMENTS =
        "This jumper is used with jumpers J27, J29 and J30 to select the
         processor core frequency.  This jumper should be installed for
         133/66Mhz, 200/66Mhz and 180/60Mhz.  This jumper should be
         removed for 166/66Mhz."
        HELP = "Consult the system board manual for more information on
                jumper settings."

    JUMPER(16) = 1
        NAME = "J29-Frequency Select"
        JTYPE = INLINE          VERTICAL = NO           REVERSE = NO
        INITVAL = LOC(1^2) 0    FACTORY = LOC(1^2) 0
        COMMENTS =
        "This jumper is used with jumpers J27, J28 and J30 to select the
         processor core frequency.  This jumper should be installed for
         133/66Mhz and 166/66Mhz.  This jumper should be removed for
         200/66Mhz and 180/60Mhz."
        HELP = "Consult the system board manual for more information on
                jumper settings."

    JUMPER(17) = 1
        NAME = "J30-Frequency Select"
        JTYPE = INLINE          VERTICAL = NO           REVERSE = NO
        INITVAL = LOC(1^2) 1    FACTORY = LOC(1^2) 1
        COMMENTS =
        "This jumper is used with jumpers J27, J28 and J29 to select the
         processor core frequency.  This jumper should be installed for
         all frequencies."
        HELP = "Consult the system board manual for more information on
                jumper settings."

    JUMPER(18) = 1
        NAME = "J9-Reserved"
        JTYPE = INLINE          VERTICAL = NO           REVERSE = NO
        INITVAL = LOC(1^2) 0    FACTORY = LOC(1^2) 0
        COMMENTS =
        "This jumper is reserved and should not be installed."
        HELP = "Consult the system board manual for more information on
                jumper settings."

    JUMPER(19) = 1
        NAME = "J10-Reserved"
        JTYPE = INLINE          VERTICAL = NO           REVERSE = NO
        INITVAL = LOC(1^2) 0    FACTORY = LOC(1^2) 0
        COMMENTS =
        "This jumper is reserved and should not be installed."
        HELP = "Consult the system board manual for more information on
                jumper settings."

    JUMPER(20) = 1
        NAME = "J12-Reserved"
        JTYPE = INLINE          VERTICAL = NO           REVERSE = NO
        INITVAL = LOC(1^2) 0    FACTORY = LOC(1^2) 0
        COMMENTS =
        "This jumper is reserved and should not be installed."
        HELP = "Consult the system board manual for more information on
                jumper settings."

;********************
;* EISA NMI Control *
;********************

IOPORT(1) = 461h                ;EISA Extended NMI Control Register:
    SIZE = BYTE                 ;
    INITVAL = 000000x0          ; bit 1 - Software NMI enable

FUNCTION = "EISA NMI Control"
  HELP = "
    EISA Non-maskable interrupts are controlled here.  When the Software
    NMI Generation Port (461h) is enabled, any output to that port causes
    an NMI."

  SUBFUNCTION = "Software NMI"
    CHOICE = "Disabled" FREE INIT = IOPORT(1) LOC(1) 0  ; default
    CHOICE = "Enabled"  FREE INIT = IOPORT(1) LOC(1) 1

;**************************
;* SYSTEM BOARD RESOURCES *
;**************************

GROUP = "I/O Ports and System Devices"
  TYPE = "SYS"

FUNCTION = "TIMER"
  SHOW = NO
  COMMENTS = "Reserves IRQ, DMA and other resources"
  HELP = "Help field for system board resources"
  CHOICE = "Reserved"
    FREE
      IRQ = 0

FUNCTION = "Keyboard"
  SHOW = NO
  TYPE = "KEY"
  CHOICE = "101 Key"
    SUBTYPE = "101"
    FREE
      IRQ = 1
      PORT = 60H
      PORT = 64H

; NOTE: We cannot explicitly reserve IRQ 2 because this
;       causes the ECU to also reserve IRQ 9!
; FUNCTION = "8259 (PIC)"
;  SHOW = NO
;  CHOICE = "Cascade"
;    FREE
;      IRQ = 2
;        TRIGGER = EDGE

FUNCTION = "Real-time Clock"
  SHOW = NO
  CHOICE = "Reserved"
    FREE
      IRQ = 8
      PORT = 70H - 71H

FUNCTION = "Co-processor"
  SHOW = NO
  TYPE = "NPX"
  CHOICE = "Installed"
    SUBTYPE = "PENTIUM"
    FREE
      IRQ = 13
        SHARE = YES

FUNCTION = "Platform"
  SHOW = NO
  CHOICE = "Eval"
  ; No resources

FUNCTION = "Chip Set"
  SHOW = NO
  CHOICE = "intel MARS"
    FREE
      PORT = 0CF8h-0CFCh
;      PORT = 22h-23h

FUNCTION = "Peripheral Controller"
  SHOW = NO
  CHOICE = "ESC"
    FREE
      PORT = 22h-23h

FUNCTION = "Mouse"
  SHOW = NO
  CHOICE = "Mouse"
    FREE
      IRQ = 12
        SHARE = "MOUSE"

FUNCTION = "Super I/O"
  SHOW = NO
  CHOICE = "Super I/O"
    FREE
      PORT = 2Eh-2Fh

;FUNCTION = "Marvin"
;  SHOW = NO
;  CHOICE = "Marvin"
;    FREE
;      PORT = 0E8h-0EBh

;   Port 300h - 307h is used by BIOS to communicate to the service
;   processor adapter.  These ports are reserved for the system.
FUNCTION = "System Resource"
  SHOW = NO
  CHOICE = "Reserved"
    FREE
      PORT = 300h-307h

FUNCTION = "PAB/Switch Status"
  SHOW = NO
  CHOICE = "Reserved"
    FREE
      PORT = 0EFh

;----------------------------------------------------------------------------
;  On Board I/O Setup:
;
;       Floppy Controller
;       Serial Ports A & B
;       Infrared
;       Parallel Port
;
;----------------------------------------------------------------------------

  FUNCTION = "Floppy Controller"
    HELP = "This section will mask out resources used by the floppy
            controller. Make sure this setting matches the BIOS Setup."
              CHOICE = " Enabled"
                  LINK
                      IRQ =            6
                      DMA =            2
              CHOICE = " Disabled"

  FUNCTION = "Serial Port A"
    HELP = "This section will mask out resources used by serial port A.
            Make sure this setting matches the BIOS Setup."
              CHOICE = " Port 3F8, IRQ4 (COM1)"
                  LINK
                      PORT = 03F8H-03FFH
                      IRQ =            4
              CHOICE = " Port 2F8, IRQ3 (COM2)"
                  LINK
                      PORT = 02F8H-02FFH
                      IRQ =            3
              CHOICE = " Port 3E8, IRQ4 (COM3)"
                  LINK
                      PORT = 03E8H-03EFH
                      IRQ =            4
              CHOICE = " Port 2E8, IRQ3 (COM4)"
                  LINK
                      PORT = 02E8H-02EFH
                      IRQ =            3
              CHOICE = " Disabled"

  FUNCTION = "Serial Port B"
    HELP = "This section will mask out resources used by serial port B.
            Make sure this setting matches the BIOS Setup."
              CHOICE = " Port 3F8, IRQ4 (COM1)"
                  LINK
                      PORT = 03F8H-03FFH
                      IRQ =            4
              CHOICE = " Port 2F8, IRQ3 (COM2)"
                  LINK
                      PORT = 02F8H-02FFH
                      IRQ =            3
              CHOICE = " Port 3E8, IRQ4 (COM3)"
                  LINK
                      PORT = 03E8H-03EFH
                      IRQ =            4
              CHOICE = " Port 2E8, IRQ3 (COM4)"
                  LINK
                      PORT = 02E8H-02EFH
                      IRQ =            3
              CHOICE = " Disabled"

  FUNCTION = "Infrared"
    HELP = "This section will mask out resources used by Infrared.
            Make sure this setting matches the BIOS Setup."
              CHOICE = " Disabled"
              CHOICE = " Enabled"
                  LINK
                      DMA = 3 | 1 | 0

  FUNCTION = "Parallel Port"
    HELP = "This section will mask out resources used by the parallel port.
            Make sure this setting matches the BIOS Setup."
              CHOICE = " Port 3BC, IRQ7 (LPT1)"
                  LINK
                      PORT = 03BCH-03BFH
                      IRQ =            7
              CHOICE = " Port 378, IRQ5 (LPT2)"
                  LINK
                      PORT = 0378H-037BH
                      IRQ =            5
              CHOICE = " Port 378, IRQ7 (LPT2)"
                  LINK
                      PORT = 0378H-037BH
                      IRQ =            7
              CHOICE = " Port 278, IRQ5 (LPT3)"
                  LINK
                      PORT = 0278H-027BH
                      IRQ =            5
              CHOICE = " Disabled"

ENDGROUP