;
; ICL SCSI host array adapter (!ICL4210.CFG)
; (c) Copyright International Computers Limited 1993
;
; $Revision:   1.0  $
; $Date:   28 May 1993 09:53:28  $

BOARD
  ID            = "ICL4210"
  NAME          = "ICL PowerARRAY (SCSI Host Bus Adapter)"
  MFR           = "ICL Personal Systems"
  CATEGORY      = "MSD"
  SLOT          = EISA
  LENGTH        = 341
  SKIRT         = NO
  READID        = YES
  BUSMASTER     = 999
  AMPERAGE      = 2500
  IOCHECK       = VALID
  DISABLE       = SUPPORTED
  COMMENTS      = "\nThe ICL Personal Systems SCSI host adapter
                 is a high performance intelligent SCSI host
                 adapter with EISA host interface.\n
                 Key features of the adapter are:\n\n
                 \t* Two SCSI bus ports\n
                 \t* 33 MB/sec EISA transfer\n
                 \t* EISA bus mastering\n
                 \t* SCSI-2 compliant\n
                 \t* Overlapped commands\n
                 \t* Scatter/gather\n
                 \t* Automatic request sense"
  HELP          = "\n\n"



IOPORT(1)       = 0Z008h                ; BIOS and IRQ select
  INITVAL       = LOC(7-0) xxxxxxxx


FUNCTION        = "Interrupt level and sense"
  TYPE          = "MSD"
  COMMENTS      = "Select Edge to boot in ISA mode.\n
                   Select Level to share interrupts."
  HELP  = "This function allows the controller interrupt number to be
           set to IRQ-9, 10, 11, 14 or 15. These interrupts may be
           Edge-triggered (non-sharable) or Level-triggered (sharable)."
  CHOICE        = "11 - Level (Default)"
  LINK
  IRQ   = 11
  TRIGGER       = LEVEL
  SHARE = "BRANDY"
  INIT  = IOPORT(1) LOC(7 6 5 4) 0110
  CHOICE        = "9 - Edge"
  LINK
  IRQ   = 9
  TRIGGER       = EDGE
  SHARE = NO
  INIT  = IOPORT(1) LOC(7 6 5 4) 0011
  CHOICE        = "9 - Level"
  LINK
  IRQ   = 9
  TRIGGER       = LEVEL
  SHARE = "BRANDY"
  INIT  = IOPORT(1) LOC(7 6 5 4) 0010
  CHOICE        = "10 - Edge"
  LINK
  IRQ   = 10
  TRIGGER       = EDGE
  SHARE = NO
  INIT  = IOPORT(1) LOC(7 6 5 4) 0101
  CHOICE        = "10 - Level"
  LINK
  IRQ   = 10
  TRIGGER       = LEVEL
  SHARE = "BRANDY"
  INIT  = IOPORT(1) LOC(7 6 5 4) 0100
  CHOICE        = "11 - Edge"
  LINK
  IRQ   = 11
  TRIGGER       = EDGE
  SHARE = NO
  INIT  = IOPORT(1) LOC(7 6 5 4) 0111
  CHOICE        = "14 - Edge"
  LINK
  IRQ   = 14
  TRIGGER       = EDGE
  SHARE = NO
  INIT  = IOPORT(1) LOC(7 6 5 4) 1001
  CHOICE        = "14 - Level"
  LINK
  IRQ   = 14
  TRIGGER       = LEVEL
  SHARE = "BRANDY"
  INIT  = IOPORT(1) LOC(7 6 5 4) 1000
  CHOICE        = "15 - Edge"
  LINK
  IRQ   = 15
  TRIGGER       = EDGE
  SHARE = NO
  INIT  = IOPORT(1) LOC(7 6 5 4) 1011
  CHOICE        = "15 - Level"
  LINK
  IRQ   = 15
  TRIGGER       = LEVEL
  SHARE = "BRANDY"
  INIT  = IOPORT(1) LOC(7 6 5 4) 1010
  CHOICE        = "Disabled"
  DISABLE       = YES
  FREE
  INIT  = IOPORT(1) LOC(7 6 5 4) 0000


FUNCTION        = "BIOS address"
 TYPE           = "MSD"
 COMMENTS       = "Select the address where BIOS should be located.\n"
 HELP = "The BIOS can be disabled or in one of eight different locations
         within the C0000 to DFFFF address range.\n
         BIOS occupies 8 kB of memory. Memory type Other, as defined by EISA
         specification, includes memory that is not managed by the operating system.\n
         When using multiple PowerARRAYs, only one can have BIOS enabled.\n
         Port address flag is used to prevent duplication.\n"
    CHOICE      = "Enabled @ C8000H (Default)"
     LINK
        MEMORY  = 8K
        ADDRESS = 0C8000h
        WRITABLE = NO
        MEMTYPE = OTH
        SHARE   = NO
        SIZE    = BYTE
        CACHE   = YES
        INIT    = IOPORT(1) LOC(3 2 1 0) 1010
        FREE
          PORT = 0F008h  SHARE = NO
    CHOICE      = "Enabled @ C0000H"
     LINK
        MEMORY  = 8K
        ADDRESS = 0C0000h
        WRITABLE = NO
        MEMTYPE = OTH
        SHARE   = NO
        SIZE    = BYTE
        CACHE   = YES
        INIT    = IOPORT(1) LOC(3 2 1 0) 1000
        FREE
          PORT = 0F008h  SHARE = NO
    CHOICE      = "Enabled @ C4000H"
     LINK
        MEMORY  = 8K
        ADDRESS = 0C4000h
        WRITABLE = NO
        MEMTYPE = OTH
        SHARE   = NO
        SIZE    = BYTE
        CACHE   = YES
        INIT    = IOPORT(1) LOC(3 2 1 0) 1001
        FREE
          PORT = 0F008h  SHARE = NO
    CHOICE      = "Enabled @ CC000H"
     LINK
        MEMORY  = 8K
        ADDRESS = 0C8000h
        WRITABLE = NO
        MEMTYPE = OTH
        SHARE   = NO
        SIZE    = BYTE
        CACHE   = YES
        INIT    = IOPORT(1) LOC(3 2 1 0) 1011
        FREE
          PORT = 0F008h  SHARE = NO
    CHOICE      = "Enabled @ D0000H"
     LINK
        MEMORY  = 8K
        ADDRESS = 0D0000h
        WRITABLE = NO
        MEMTYPE = OTH
        SHARE   = NO
        SIZE    = BYTE
        CACHE   = YES
        INIT    = IOPORT(1) LOC(3 2 1 0) 1100
        FREE
          PORT = 0F008h  SHARE = NO
    CHOICE      = "Enabled @ D4000H"
     LINK
        MEMORY  = 8K
        ADDRESS = 0D4000h
        WRITABLE = NO
        MEMTYPE = OTH
        SHARE   = NO
        SIZE    = BYTE
        CACHE   = YES
        INIT    = IOPORT(1) LOC(3 2 1 0) 1101
        FREE
          PORT = 0F008h  SHARE = NO
    CHOICE      = "Enabled @ D8000H"
     LINK
        MEMORY  = 8K
        ADDRESS = 0D8000h
        WRITABLE = NO
        MEMTYPE = OTH
        SHARE   = NO
        SIZE    = BYTE
        CACHE   = YES
        INIT    = IOPORT(1) LOC(3 2 1 0) 1110
        FREE
          PORT = 0F008h  SHARE = NO
    CHOICE      = "Enabled @ DC000H"
     LINK
        MEMORY  = 8K
        ADDRESS = 0C8000h
        WRITABLE = NO
        MEMTYPE = OTH
        SHARE   = NO
        SIZE    = BYTE
        CACHE   = YES
        INIT    = IOPORT(1) LOC(3 2 1 0) 1111
        FREE
          PORT = 0F008h  SHARE = NO
    CHOICE      = "Disabled"
      DISABLE   = YES
      FREE
        INIT    = IOPORT(1) LOC(3) 0