;WD1007V-SE2 Configuration File
;This file does not describe all board options.
;Only those options that require system resources are described.
BOARD
     ID = "ICU0052"
     NAME = "Western Digital WD1007V-SE2 Hard/Floppy Disk Controller"
     MFR = "Western Digital"
     VERSION = 1,0
     CATEGORY = "MSD"
     SLOT = ISA16
     COMMENTS = "Western Digital WD1007V-SE2 Hard/Floppy Disk Controller \n"

JUMPER(8) = 1
     NAME = "BIOS Address"
     JTYPE = TRIPOLE
     VERTICAL = YES
     LABEL = LOC(1) "W8"
     FACTORY = LOC(1) 1

JUMPER(3) = 1
     NAME = "BIOS Enable/Disable"
     JTYPE = PAIRED
     VERTICAL = NO
     LABEL = LOC(1) "W3"
     FACTORY = LOC(1) 0

JUMPER(126) = 2
     NAME = "Hard/Floppy I/O Port"
     JTYPE = PAIRED
     VERTICAL = YES
     REVERSE = NO
     LABEL = LOC(2 1) "W12"
                      "W6"
     FACTORY = LOC(2 1) 00

JUMPER(7) = 1
     NAME = "Interrupt Select"
     JTYPE = TRIPOLE
     VERTICAL = YES
     LABEL = LOC(1) "W7"
     FACTORY = LOC(1) 0


GROUP = "System Resources used by WD1007V-SE2"
TYPE = "MSD"

FUNCTION = "BIOS Memory Address"

     CHOICE = "CC000-CFFFF"
       COMBINE
       MEMORY = 16K
       ADDRESS = 0CC000H
       WRITABLE = NO
       MEMTYPE = OTH
       SHARE = NO
       INIT = JUMPER(8) LOC(1) 1
       INIT = JUMPER(3) LOC(1) 0
     CHOICE = "C8000-CBFFF"
       COMBINE
       MEMORY = 16K
       ADDRESS = 0C8000H
       WRITABLE = NO
       MEMTYPE = OTH
       SHARE = NO
       INIT = JUMPER(8) LOC(1) 0
       INIT = JUMPER(3) LOC(1) 0
     CHOICE = "Disabled"
       DISABLE = YES
       LINK
       INIT = JUMPER(8) LOC(1) 1
       INIT = JUMPER(3) LOC(1) 1

FUNCTION = "Hard Disk I/O Port"

     CHOICE = "Primary 1F0-1F7"
       LINK
       PORT = 1F0H-1F7H
       INIT = JUMPER(126) LOC(2) 0

     CHOICE = "Secondary 170-177"
       LINK
       PORT = 170H-177H
       INIT = JUMPER(126) LOC(2) 1

FUNCTION = "Floppy I/O Port"

     CHOICE = "Primary 3F2-3F7"
       LINK
       PORT = 3F2H-3F7H
       FREE
       IRQ = 6
       FREE
       DMA = 2
       INIT = JUMPER(126) LOC(1) 0

     CHOICE = "Secondary 372-377"
       LINK
       PORT = 372H-377H
       FREE
       IRQ = 6
       FREE
       DMA = 2
       INIT = JUMPER(126) LOC(1) 1

FUNCTION = "Interrupt Select"

     CHOICE = "Interrupt 14"
       LINK
       IRQ = 14
       SHARE = NO
       INIT = JUMPER(7) LOC(1) 0
     CHOICE = "Interrupt 15"
       LINK
       IRQ = 15
       SHARE = NO
       INIT = JUMPER(7) LOC(1) 1

ENDGROUP