BOARD
     ID          = "ICU0940"
     NAME        = "Acculogic sIDE-1/16"
     MFR         = "Acculogic"
     VERSION = 1,0
     CATEGORY    = "MSD"
     SLOT        = ISA8
     COMMENTS    ="Hard Drives Supported: Two AT Interface(IDE) drives\n
                   Floppy Drives Supported: None"

JUMPER(1) = 1
     NAME = "BIOS Enabled"
     JTYPE = PAIRED
     VERTICAL = YES
     LABEL = LOC(1) "J1"
     FACTORY = LOC(1) 0

JUMPER(2) = 1
     NAME = "IRQ2"
     JTYPE =  PAIRED
     VERTICAL = YES
     LABEL = LOC(1) "JP4"
JUMPER(3) = 1
     NAME = "IRQ5"
     JTYPE =  PAIRED
     VERTICAL = YES
     LABEL = LOC(1) "JP5"
     FACTORY = LOC(1) 1

JUMPER(4) = 1
     NAME = "Hard Drive Enabled"
     JTYPE =  PAIRED
     VERTICAL = YES
     LABEL = LOC(1) "JP6"
     FACTORY = LOC(1) 1

FUNCTION = "BIOS Address"
     CHOICE = "C8000H"
       FREE
       MEMORY = 16K ;CC000-C8000=4000H
       ADDRESS = 0C8000H 
       WRITABLE = NO
       MEMTYPE = OTH
       SHARE = NO
       INIT = JUMPER(1) LOC(1) 0
     CHOICE = "CC000H"
       FREE
       MEMORY = 16K 
       ADDRESS = 0CC000H
       WRITABLE = NO
       MEMTYPE = OTH
       SHARE = NO
       INIT = JUMPER(1) LOC(1) 0
     CHOICE = "D8000H"
       FREE
       MEMORY = 16K 
       ADDRESS = 0D8000H
       WRITABLE = NO
       MEMTYPE = OTH
       SHARE = NO
       INIT = JUMPER(1) LOC(1) 0
     CHOICE = "DC000H"
       FREE
       MEMORY = 16K 
       ADDRESS = 0DC000H
       WRITABLE = NO
       MEMTYPE = OTH
       SHARE = NO
       INIT = JUMPER(1) LOC(1) 0
     CHOICE = "Disabled"
       DISABLE = YES
       FREE
       INIT = JUMPER(1) LOC(1) 1

FUNCTION = "Interrupt"

   CHOICE = "IRQ5"
       FREE
       IRQ = 5
       TRIGGER = EDGE
       INIT = JUMPER(3) LOC(1) 1
    CHOICE = "IRQ2"
       FREE
       IRQ = 2
       TRIGGER = EDGE
       INIT = JUMPER(2) LOC(1) 1
 
FUNCTION = "Hard Drive"
     CHOICE = "Enable"
       FREE
       INIT = JUMPER(4) LOC(1) 0
     CHOICE = "Disabled"
       DISABLE = YES
       FREE
       INIT = JUMPER(4) LOC(1) 1