; Release 1.2
;
; DMA channel selection is changed have DRQ 3 as default.
; The DRQ choice will be in the following oreder 3, 0, 1, 5, 6, 7
;

 BOARD                   
 ID="INT0016"
 MFR="Intel"
 NAME="Intel Server Monitor Module"
 CATEGORY="MEM"
 SLOT=isa16
 LENGTH=330
 HELP = "This configuration file will configure The HOST ISA bus interface."

	
 
IOPORT(1) = PORTVAR(1)
IOPORT(2) = PORTVAR(1)
IOPORT(3) = PORTVAR(1)

IOPORT(4) = PORTVAR(1)
IOPORT(5) = PORTVAR(2)

IOPORT(6) = PORTVAR(1)
IOPORT(7) = PORTVAR(2)

IOPORT(8) = PORTVAR(1)
IOPORT(9) = PORTVAR(2)

IOPORT(10) = PORTVAR(1)
IOPORT(11) = PORTVAR(2)

IOPORT(12) = 000BH
IOPORT(13) = 000AH
IOPORT(14) = 00D6H
IOPORT(15) = 00D4H

FUNCTION = "Server Monitor Module Port Location"
  TYPE = "PORTS"
  HELP = " Choose the desired base I/O port address.  The
           available addresses are 110H, 210H, and 310H. If
           another device is using these ports, the Configuration
           Utility will disallow their use."
	
	CHOICE = "Server Monitor at Ports 110H-113H"
	  SUBTYPE = "PORTS,110"

          PORTVAR(1) = 110H
          PORTVAR(2) = 111H

	  FREE
            PORT=110H-113H


	CHOICE = "Server Monitor at Ports 210H-213H"
	  SUBTYPE = "PORTS,210"

          PORTVAR(1) = 210H
          PORTVAR(2) = 211H

	  FREE
            PORT=210H-213H


	CHOICE = "Server Monitor at Ports 310H-313H"
	  SUBTYPE = "PORTS,310"

          PORTVAR(1) = 310H
          PORTVAR(2) = 311H

	  FREE
            PORT=310H-313H

FUNCTION = "Server Monitor Module Shared Memory"
  TYPE = "MEM,SMI"
  HELP = "Select the base address for the Shared Memory Interface (SMI)
	and then write to the appropriate I/O ports. The SMI Mapping
	register maps to any 8KB window in 8KB increments in the lowest
	1MB of addressable space.\n\n"
	
	CHOICE = "Select Base SMI Address - Use Resource Edit (F6) to change"
	  HELP = " To select the SMI Base address use the resource 
		feature and select the desired address. The available
		address start at C8000H through EE000H. If another device
		is using this address, the Configuration Utility will
		disallow any shared memory addressing."
	  SUBTYPE = "ADR"
	  FREE
	    INIT = IOPORT(1) 10100001
	    INIT = IOPORT(2) 10110010
	    INIT = IOPORT(3) 11000011

	    INIT = IOPORT(4) 00000011               ; Index 3
	  COMBINE                         
		MEMORY = 8K
			ADDRESS =       0C8000H-0EE000H STEP = 8K
			SHARE = NO
			CACHE = NO
			MEMTYPE = OTH
			WRITABLE = YES
			;                          C8         CA         CC         CE         D0         D2
			;                          D4         D6         D8         DA         DC         DE		
			; 			   E0	      E2	 E4	    E6	       E8	  EA	    EC		EE
			INIT = IOPORT(5)        01100100 | 01100101 | 01100110 | 01100111 | 01101000 | 01101001 | 
						01101010 | 01101011 | 01101100 | 01101101 | 01101110 | 01101111 | 
						01110000 | 01110001 | 01110010 | 01110011 | 01110100 | 01110101 | 01110110 | 01110111
			
	  CHOICE = "DISABLE SMM"
     

FUNCTION = "Server Monitor Module IRQ"
	TYPE = "IRQ"
	HELP = "Select the IRQ for the Server Monitor"
	CHOICE = "Select IRQ - Use Resource Edit (F6) to change"
	  HELP = " To select the IRQ for the Server Monitor use the resource 
		feature and select the desired IRQ level.  The available
		IRQs are 4, 5, 6, 7, 10, 11, 12, 14, and 15.  If another
		device is using this level, the Configuration Utility will
		report a conflict."
	  SUBTYPE = "IRQ"
	  FREE
			INIT = IOPORT(6) 00000100               ; Index 4
	  LINK                          
			IRQ =  4 | 5 | 6 | 7 | 10 | 11 | 12 | 14 | 15
			SHARE = NO
			INIT = IOPORT(7) LOC(3 2 1 0)  0100 | 0101 | 0110 | 0111 | 1010 | 1011 | 1100 | 1110 | 1111
   CHOICE = "DISABLE SMM"


FUNCTION = "Server Monitor Module DRQ"
	TYPE = "DRQ"
	HELP = " Select a DMA channel for the Server Monitor. The DMA channel 
		used by the Server Monitor Module during ISA bus accesses.
		The available DMA channels are 0, 1, 3, 5, 6, 7\n\n"
       
	; DRQ 3 is the default choice

	CHOICE = "DMA Channel 3"
	  HELP = " Selects DMA channel 3. "
	  SUBTYPE = "DQ3"
	  FREE
			DMA = 3 
			SHARE = NO
			INIT = IOPORT(8) 00000101               ; Index 5
			INIT = IOPORT(9) LOC(3 2 1 0) 0011 
			INIT = IOPORT(12)  11000011 
			INIT = IOPORT(13)  00000011


	CHOICE = "DMA Channel 0"
	  HELP = " Selects DMA channel 0. "
	  SUBTYPE = "DQ0"
	  FREE
			DMA = 0 
			SHARE = NO
			INIT = IOPORT(8) 00000101               ; Index 5
			INIT = IOPORT(9) LOC(3 2 1 0) 0000 
			INIT = IOPORT(12)  11000000 
			INIT = IOPORT(13)  00000000

	CHOICE = "DMA Channel 1"
	  HELP = " Selects DMA channel 1. "
	  SUBTYPE = "DQ1"
	  FREE
			DMA = 1 
			SHARE = NO
			INIT = IOPORT(8) 00000101               ; Index 5
			INIT = IOPORT(9) LOC(3 2 1 0) 0001 
			INIT = IOPORT(12)  11000001 
			INIT = IOPORT(13)  00000001

	CHOICE = "DMA Channel 5"
	  HELP = " Selects DMA channel 5. "
	  SUBTYPE = "DQ5"
	  FREE
			DMA = 5   
			SHARE = NO
			INIT = IOPORT(8) 00000101               ; Index 5
			INIT = IOPORT(9) LOC(3 2 1 0)  0101
			INIT = IOPORT(14)  11000001 
			INIT = IOPORT(15)  00000001 

	CHOICE = "DMA Channel 6"
	  HELP = " Selects DMA channel 6. "
	  SUBTYPE = "DQ6"
	  FREE
			DMA = 6
			SHARE = NO
			INIT = IOPORT(8) 00000101               ; Index 5
			INIT = IOPORT(9) LOC(3 2 1 0) 0110
			INIT = IOPORT(14)  11000010 
			INIT = IOPORT(15)  00000010 

	CHOICE = "DMA Channel 7"
	  HELP = " Selects DMA channel 7. "
	  SUBTYPE = "DQ7"
	  FREE
			DMA = 7  
			SHARE = NO
			INIT = IOPORT(8) 00000101               ; Index 5
			INIT = IOPORT(9) LOC(3 2 1 0) 0111 
			INIT = IOPORT(14)  11000011 
			INIT = IOPORT(15)  00000011 
   CHOICE = "DISABLE SMM"



FUNCTION = "Server Monitor Module Enable SMI, IRQ and DMA"
	TYPE = "HOB"
	HELP = "This function will enable or disable the shared memory interface, 
		DMA channel, and the IRQ.  When these are disabled, the Server
		Monitor Module is invisible to the host server. \n\n"
	CHOICE = "Enabled"
       	SUBTYPE = "ENB,ALL"
		FREE
			INIT = IOPORT(10) 00000110               ; Index 6
			INIT = IOPORT(11) 00000111               ; enable all

	CHOICE = "Disabled"
	SUBTYPE = "DIS,ALL"
	DISABLE = YES
	HELP = " When these are disabled, the Server Monitor Module cannot
		communicate with the server. But the System Configuration 
		Utility will reserve the resources specified above.  To free
		the resources used by the Server Monitor Module, choose
		'DISABLE SMM' for each of the above selections.\n\n"
		FREE
			INIT = IOPORT(10) 00000110               ; Index 6
			INIT = IOPORT(11) 00000000               ; disable all