BOARD                   
 ID="INT0210"
 MFR="Intel"
 NAME="Intel Server Monitor at I/O port 210h"
 CATEGORY="MEM"
 SLOT=isa16
 LENGTH=330
 HELP = "This configuration file will configure The HOST ISA bus interface.  
	 First the choice of 3 address can be configured at ports: 
		210H, 210H, 310H"

	
 
IOPORT(1) = 210H
IOPORT(2) = 210H
IOPORT(3) = 210H

IOPORT(4) = 210H
IOPORT(5) = 211H

IOPORT(6) = 210H
IOPORT(7) = 211H

IOPORT(8) = 210H
IOPORT(9) = 211H

IOPORT(10) = 210H
IOPORT(11) = 211H

IOPORT(12) = 000BH
IOPORT(13) = 000AH
IOPORT(14) = 00D6H
IOPORT(15) = 00D4H

FUNCTION = "Shared Memory Interface (SMI) mapping"
  TYPE = "MEM,SMI"
  HELP = "Select the base address for the SMI and then write to the
	appropriate I/O ports.  The SMI Mapping register maps to any 
	8KB window in 8KB increments in the lowest 1MB of addressable 
	space.\n\n"
	
	CHOICE = "Select Base SMI Address - Use Resource Edit to change"
	  HELP = " To select the SMI Base address use the resource 
		feature and select the desired address.  The available
		address start at C8000H through DE000H.  If another device
		is using this address,  the Configuration Utility will
		disallow any shared memory addressing."
	  SUBTYPE = "ADR"
	  FREE
	    INIT = IOPORT(1) 10100001
	    INIT = IOPORT(2) 10110010
	    INIT = IOPORT(3) 11000011

			INIT = IOPORT(4) 00000011               ; Index 3
	  LINK                          
		MEMORY = 8K
			ADDRESS =       0C8000H-0DE000H STEP = 8K
			SHARE = NO
			;                                               C8                              CA                       CC                     CE                              D0                       D2
			;                                               D4                              D6                       D8                     DA                              DC                       DE
			INIT = IOPORT(5)        01100100 | 01100101 | 01100110 | 01100111 | 01101000 | 01101001 | 
									01101010 | 01101011 | 01101100 | 01101101 | 01101110 | 01101111
   CHOICE = "DISABLE HOBBES"
     

FUNCTION = "Selection of the IRQ level"
	TYPE = "IRQ"
	HELP = "Select the IRQ for the Server Monitor"
	CHOICE = "Select IRQ Level - Use Resource Edit to change"
	  HELP = " To select the IRQ for the Server Monitor use the resource 
		feature and select the desired IRQ level.  The available
		IRQs are 4, 5, 6, 7, 10, 11, 12.  If another device
		is using this level,  the Configuration Utility will
		disallow any shared memory addressing."
	  SUBTYPE = "IRQ"
	  FREE
			INIT = IOPORT(6) 00000100               ; Index 4
	  LINK                          
			IRQ =  5 | 7 | 10 | 11 | 12
			SHARE = NO
			INIT = IOPORT(7) LOC(3 2 1 0)  0101 | 0111 | 1010 | 1011 | 1100
   CHOICE = "DISABLE HOBBES"

			


FUNCTION = "Selection of the DRQ Level"
	TYPE = "DRQ"
	HELP = " Select a DMA channel for the Server Monitor. The DMA channel 
		used by the Server Monitor during ISA bus accesses.\n\n"


	CHOICE = "DMA Channel 1"
	  HELP = " Selects DMA channel 1 and puts in cascade mode. "
	  SUBTYPE = "DQ1"
	  FREE
			DMA = 1 
			SHARE = NO
			INIT = IOPORT(8) 00000101               ; Index 5
			INIT = IOPORT(9) LOC(3 2 1 0) 0001 
			INIT = IOPORT(12)  11000001 
			INIT = IOPORT(13)  00000001

	CHOICE = "DMA Channel 2"
	  HELP = " Selects DMA channel 2 and puts in cascade mode. "
	  SUBTYPE = "DQ2"
	  FREE
			DMA = 2 
			SHARE = NO
			INIT = IOPORT(8) 00000101               ; Index 5
			INIT = IOPORT(9) LOC(3 2 1 0) 0010 
			INIT = IOPORT(12)  11000010 
			INIT = IOPORT(13)  00000010

	CHOICE = "DMA Channel 3"
	  HELP = " Selects DMA channel 3 and puts in cascade mode. "
	  SUBTYPE = "DQ3"
	  FREE
			DMA = 3 
			SHARE = NO
			INIT = IOPORT(8) 00000101               ; Index 5
			INIT = IOPORT(9) LOC(3 2 1 0) 0011 
			INIT = IOPORT(12)  11000011 
			INIT = IOPORT(13)  00000011


	CHOICE = "DMA Channel 5"
	  HELP = " Selects DMA channel 5 and puts in cascade mode. "
	  SUBTYPE = "DQ5"
	  FREE
			DMA = 5   
			SHARE = NO
			INIT = IOPORT(8) 00000101               ; Index 5
			INIT = IOPORT(9) LOC(3 2 1 0)  0101
			INIT = IOPORT(14)  11000001 
			INIT = IOPORT(15)  00000001 

	CHOICE = "DMA Channel 6"
	  HELP = " Selects DMA channel 6 and puts in cascade mode. "
	  SUBTYPE = "DQ6"
	  FREE
			DMA = 6
			SHARE = NO
			INIT = IOPORT(8) 00000101               ; Index 5
			INIT = IOPORT(9) LOC(3 2 1 0) 0110
			INIT = IOPORT(14)  11000010 
			INIT = IOPORT(15)  00000010 

	CHOICE = "DMA Channel 7"
	  HELP = " Selects DMA channel 7 and puts in cascade mode. "
	  SUBTYPE = "DQ7"
	  FREE
			DMA = 7  
			SHARE = NO
			INIT = IOPORT(8) 00000101               ; Index 5
			INIT = IOPORT(9) LOC(3 2 1 0) 0111 
			INIT = IOPORT(14)  11000011 
			INIT = IOPORT(15)  00000011 
   CHOICE = "DISABLE HOBBES"



FUNCTION = "Enable SMI, IRQ and DMA"
	TYPE = "HOB"
	HELP = "This function will enable or disable the shared memory interface, 
		DMA channel, and the IRQ.  When the SMI is disabled, it is
		invisible to the host server. When the DMA channel is disabled, no 
		ISA bus accesses are possible. When the IRQ is disabled, the
		Server Monitor cannot interrupt the server processor, which is
		required for normal communication. \n\n"
	CHOICE = "Enabled"
	SUBTYPE = "ENB,ALL"
		FREE
			INIT = IOPORT(10) 00000110               ; Index 6
			INIT = IOPORT(11) 00000111               ; enable all
	CHOICE = "Disabled"
	SUBTYPE = "DIS,ALL"
	DISABLE = YES
	HELP = " When these are disabled, the Server Monitor cannot communicate
		with the server.\n\n"
		FREE
			INIT = IOPORT(10) 00000110               ; Index 6
			INIT = IOPORT(11) 00000000               ; disable all