;This info was taken from !isaAC01.cfg and modified BOARD ID="ISA3211" NAME="10K VGA/LCD Board" MFR="Acer" CATEGORY="VID" SLOT=ISA16 LENGTH=175 SKIRT=NO READID = NO AMPERAGE = 2000 IOCHECK = INVALID DISABLE = UNSUPPORTED JUMPER(1)=2 NAME="J8" JTYPE = INLINE REVERSE = YES VERTICAL= NO FACTORY=LOC(1^2 2^3) 10 COMMENTS = "VGA Enable/Disable \n A jumper across 1 and 2 enables the video section if this board, a jumper across 2 and 3 disables the video section if this board." JUMPER(2)=2 NAME="J6" JTYPE = INLINE REVERSE = YES VERTICAL=NO INITVAL = LOC(1^2 2^3) 01 FACTORY=LOC(1^2 2^3) 01 COMMENTS = "Reset Disable/Enable \n A jumper across 1 and 2 disables Reset, a jumper across 2 and 3 enables Reset." JUMPER(3)=2 NAME="J11" JTYPE = INLINE REVERSE = YES VERTICAL=NO FACTORY=LOC(1^2 2^3) 01 COMMENTS = "Data Width Select \n A jumper across 1 and 2 sets the data width to 8 bits, a jumper across 2 and 3 sets the data width to 8/16 bits." FUNCTION="Video Section" TYPE="VID,VGA" SUBFUNCTION="Display" CHOICE="Enable Graphics or Text: Color or Mono" LINK PORT=03B0h-03BBh PORT=03C0h-03CFh PORT=03D0h-03DFh LINK MEMORY=64K ADDRESS=0A0000h MEMTYPE=OTH LINK MEMORY=32K ADDRESS=0B0000h MEMTYPE=OTH LINK MEMORY=32K ADDRESS=0B8000h MEMTYPE=OTH FREE IRQ=2 INIT = JUMPER(1) LOC(1^2 2^3) 10 CHOICE="Disable" DISABLE = YES FREE INIT = JUMPER(1) LOC(1^2 2^3) 01 SUBFUNCTION="Data Width" CHOICE="8/16 bits" LINK MEMORY=32K ADDRESS=0C0000h MEMTYPE=OTH WRITABLE=NO FREE INIT = JUMPER(3) LOC(1^2 2^3) 01 CHOICE="8 bits" LINK MEMORY=32K ADDRESS=0C0000h MEMTYPE=OTH WRITABLE=NO FREE INIT = JUMPER(3) LOC(1^2 2^3) 10