BOARD						; 10/22 KN New Definition
 ID="ISA9403"
 NAME="Gateway G/Token Ring AT "
 MFR="Gateway"
 CATEGORY="NET"
 SLOT=ISA16
 LENGTH= 307
 COMMENTS="
 \nSelect desired Network Operating System or 'All Other Uses' to 
 obtain valid hardware options. 
 \n\nNote: IRQ 2 is equivalent to IRQ 9. "

SWITCH(1) = 3
 STYPE=DIP
 NAME="SW1 I/O Ports"
 REVERSE=YES
 LABEL=LOC (1-3) "1" "2" "3"
 COMMENTS = "In SW1 switch block, only switch no.3 is used for I/O Ports."

SWITCH(2) = 2
 STYPE=DIP
 NAME="SW1 DMA Channel"
 REVERSE=YES
 LABEL = LOC (1 2) "4" "5"
 COMMENTS = "In SW1 switch block, only switches no.4 and no.5 are used for
 DMA Channel."

JUMPER(1)=2
 JTYPE=INLINE
 NAME="STR1"
 LABEL=LOC(3^2 2^1) "A" "B"
 COMMENTS = "This jumper should always be in position A."

JUMPER(2)=2
 JTYPE=INLINE
 NAME="STR2"
 LABEL=LOC(3^2 2^1) "A" "B"
 COMMENTS = "This jumper should always be in position A."

JUMPER(3)=2
 JTYPE=INLINE
 NAME="STR3"
 LABEL=LOC(3^2 2^1) "A" "B"
 COMMENTS = "This jumper should always be in position A."

JUMPER(4)=2
 JTYPE=INLINE
 NAME="STR4"
 VERTICAL = YES
 LABEL=LOC(3^2 2^1) "A" "B"
 COMMENTS = "This jumper should always be in position A."

JUMPER(5)=2
 JTYPE=INLINE
 NAME="STR5"
 VERTICAL = YES
 LABEL=LOC(3^2 2^1) "A" "B"
 COMMENTS = "This jumper should always be in position A."

JUMPER(6)=2
 JTYPE=INLINE
 NAME="STR6"
 VERTICAL = YES
 LABEL=LOC(3^2 2^1) "A" "B"
 COMMENTS = "This jumper should always be in position A."

JUMPER(7) = 8
 JTYPE=paired
 NAME="JP1 Interrupt Req"
 REVERSE =YES
 LABEL = LOC (1-8) "IRQ3" "IRQ5" "IRQ7" "IRQ2" "IRQ10" "IRQ11" "IRQ12"
 "IRQ15"
 COMMENTS = "The labels marked below are only for interrupt identification.
 They do not reflect the actual labels of jumper block JP1."

JUMPER(8)=2
 JTYPE=paired
 NAME="J1 Cable Types"

SOFTWARE(1) ="
 \n\nNetware provides preset options to be selected from a list 
 numbered Configuration Option 00-nn. 
 \n\nBe Sure to Configure Network Server or Workstation 
 Software to Use the Selected Resource Options: \n"

FUNCTION="G/Token Ring AT Config Options"
 TYPE="NET"

 SUBFUNCTION="Netware 286"
 CHOICE="Config Option 00: 12,A20,5"
 LINK
 IRQ = 12
 INIT = JUMPER(7) LOC(1-8) 00000010
 PORT = 0A20h-0A2Fh
 INIT = SWITCH(1) LOC(1-3) 011
 DMA = 5
 TIMING=TYPEA
 INIT = SWITCH(2) LOC (1 2) 00
 INIT = software(1) "Optn 00 12,A20,5"
 CHOICE="Config Option 01: 15,1A20,6"
 LINK
 IRQ = 15
 INIT = JUMPER(7) LOC(1-8) 00000001
 PORT = 01A20h-01A2Fh
 INIT = SWITCH(1) LOC(1-3) 010
 DMA = 6
 TIMING=TYPEA
 INIT = SWITCH(2) LOC (1 2) 01
 INIT = software(1) "Optn 01 15,1A20,6"
 CHOICE="Config Option 02: 11,A20,7"
 LINK
 IRQ = 11
 INIT = JUMPER(7) LOC(1-8) 00000100
 PORT = 0A20h-0A2Fh
 INIT = SWITCH(1) LOC(1-3) 011
 DMA = 7
 TIMING=TYPEA
 INIT = SWITCH(2) LOC (1 2) 10
 INIT = software(1) "Optn 02 11,A20,7"
 CHOICE="Config Option 03: 10,1A20,5"
 LINK
 IRQ = 10
 INIT = JUMPER(7) LOC(1-8) 00001000
 PORT = 01A20h-01A2Fh
 INIT = SWITCH(1) LOC(1-3) 010
 DMA = 5
 TIMING=TYPEA
 INIT = SWITCH(2) LOC (1 2) 00
 INIT = software(1) "Optn 03 10,A20,5"
 CHOICE="Config Option 04: 2,A20,6"
 LINK
 IRQ = 9
 INIT = JUMPER(7) LOC(1-8) 00010000
 PORT = 0A20h-0A2Fh
 INIT = SWITCH(1) LOC(1-3) 011
 DMA = 6
 TIMING=TYPEA
 INIT = SWITCH(2) LOC (1 2) 01
 INIT = software(1) "Optn 04 2,A20,6"
 CHOICE = "Config Option 05: 7,1A20,7"
 LINK
 IRQ = 7
 INIT = JUMPER(7) LOC(1-8) 00100000
 PORT = 01A20h-01A2Fh
 INIT = SWITCH(1) LOC(1-3) 010
 DMA = 7
 TIMING=TYPEA
 INIT = SWITCH(2) LOC (1 2) 10
 INIT = software(1) "Optn 05 7,1A20,7"
 CHOICE="Config Option 06: 5,A20,5"
 LINK
 IRQ = 5
 INIT = JUMPER(7) LOC(1-8) 01000000
 PORT = 0A20h-0A2Fh
 INIT = SWITCH(1) LOC(1-3) 011
 DMA = 5
 TIMING=TYPEA
 INIT = SWITCH(2) LOC (1 2) 00
 INIT=software(1) "Optn 06 5,A20,5"
 CHOICE="Config Option 07: 3,1A20,6"
 LINK
 IRQ = 3
 INIT = JUMPER(7) LOC(1-8) 10000000
 PORT = 01A20h-01A2Fh
 INIT = SWITCH(1) LOC(1-3) 010
 DMA = 6
 TIMING=TYPEA
 INIT = SWITCH(2) LOC (1 2) 01
 INIT = software(1) "Optn 07 3,1A20,6"
 CHOICE = "Not Selected"
 SUBFUNCTION="All Other Uses"
 CHOICE="Not Selected"
 CHOICE="Available Adapter Options"
 LINK
 IRQ = 3|5|7|9|10|11|
 12|15 
 INIT=JUMPER(7) LOC (1-8)
 10000000|01000000|00100000|00010000|00001000|00000100|
 00000010|00000001 
 INIT=software(1)
 "IRQ3"|"IRQ5"|"IRQ7"|"IRQ2"|"IRQ10"| "IRQ11"|
 "IRQ12"| "IRQ15"
 LINK
 PORT= 0A20h-0A2Fh|01A20h-01A2Fh 
 INIT=SWITCH(1) LOC(1-3)
 011|010
 INIT=software(1)
 "IOA20"|"IO1A20" 
 LINK
 DMA = 5|6|7
 TIMING=TYPEA
 INIT=SWITCH(2) LOC (1 2)
 00|01|10
 INIT=software(1)
 "DMA5"|"DMA6"|"DMA7" 

FUNCTION="G/Token Ring AT Cable Type"
 TYPE="NET"
 CHOICE="Type 3"
 FREE
 INIT=JUMPER(8) LOC(2 1) 11
 INIT=SOFTWARE(1) "Type 3"
 CHOICE="Type 1/6"
 FREE
 INIT=JUMPER(8) LOC(2 1) 00 
 INIT=SOFTWARE(1) "Type 1/6"

FUNCTION="Strap Position (Always A)"
 TYPE="NET"
 CHOICE="Position A"
 FREE
 INIT=JUMPER(1) LOC(3^2) 1
 INIT=JUMPER(2) LOC(3^2) 1
 INIT=JUMPER(3) LOC(3^2) 1
 INIT=JUMPER(4) LOC(3^2) 1
 INIT=JUMPER(5) LOC(3^2) 1
 INIT=JUMPER(6) LOC(3^2) 1
 INIT=SOFTWARE(1) "STR1-STR6 set to A"