BOARD
   ID       = "ISAAB00"
   NAME     = "Hayes Smartmodem 1200B"
   MFR      = "Hayes Microcomputer Products"
   CATEGORY = "COM"
   SLOT     = ISA8
   LENGTH   = 330          ; millimeters
   COMMENTS = "
 The Smartmodem 1200B is compatible with Bell System
 (Western Electric) 212A modems communicating
 asynchronously.  It operates at both 0-300 bps and
 1200 bps and communicates on-line in full or half-duplex."

SWITCH(1) = 3
   NAME     = ""
   STYPE    = dip
   VERTICAL = yes
   LABEL    = LOC(3 2 1) "S3" "S2" "S1"
   FACTORY  = LOC(3 2 1) 101
   COMMENTS = "
 Switch 1 sets the modem to COM1 if ON and COM if OFF.\n
 Switch 2 sets the connector to RJ11 if OFF and RJ12 or RJ13 if ON.\n
 Switch 3 follows the presence or absence of a carrier signal if ON,\n
          and forces carrier signal to TRUE if OFF."
 
JUMPER(1) = 2
   NAME     = "P2"
   JTYPE    = INLINE
   VERTICAL = YES
   LABEL    = LOC(3 2 1) "C" "B" "A"
   FACTORY  = LOC(3^2 2^1) 01
   COMMENTS = "
 This Jumper forces DTR to TRUE if pins 2 and 3 are connected.\n
 "

FUNCTION = "Modem Functions"
   TYPE        = "COM,MDM"
   CONNECTION  = "Two modular telephone connectors"
   SUBFUNCTION = "Device Port"
      CHOICE = "COM1"
         FREE
            INIT = SWITCH(1) LOC(1) 1
            IRQ  = 4
            PORT = 03F8h-03FFh
      CHOICE = "COM2"
         FREE
            INIT = SWITCH(1) LOC(1) 0
            IRQ  = 3
            PORT = 02F8h-02FFh

   SUBFUNCTION = "Connector"
      CHOICE = "RJ11 modular telephone jack"
         FREE
            INIT = SWITCH(1) LOC(2) 0
      CHOICE = "RJ12 or RJ13 modular telephone jack"
         FREE
            INIT = SWITCH(1) LOC(2) 1

   SUBFUNCTION = "Carrier Signal"
      CHOICE = "Follow the presence or absence of a carrier signal"
         FREE
            INIT = SWITCH(1) LOC(3) 1
      CHOICE = "Force the presence of a carrier signal TRUE"
         FREE
            INIT = SWITCH(1) LOC(3) 0

   SUBFUNCTION = "DTR Signal"
      CHOICE = "Monitor status of DTR"
         FREE
            INIT = JUMPER(1) LOC(2^1) 1
      CHOICE = "Ignore the DTR line, DTR always TRUE"
         FREE
            INIT = JUMPER(1) LOC(3^2) 1