BOARD
   ID       = "ISAAF01"
   NAME     = "Computone IntelliPort ATCC Cluster Controller"
   MFR      = "Computone Systems"
   CATEGORY = "COM"
   SLOT     = ISA16
   LENGTH   = 330
   COMMENTS = ""
   HELP     = ""

SWITCH(1) = 8
   NAME    = "SW1"
   STYPE   = DIP
   LABEL   = LOC(8-1) "8" "7" "6" "5" "4" "3" "2" "1"

JUMPER(1) = 6
   NAME    = "P4"
   JTYPE   = PAIRED
   REVERSE = YES
   LABEL   = LOC(1-6) "3" "5" "10" "11" "12" "15"
   FACTORY = LOC(6) 1

FUNCTION = "Multiplexor"
   CONNECTION = "4 RJ-45 connectors"

   SUBFUNCTION = "Baud Rate"
      COMMENTS = "
 The 260,000 baud rate will enhance performance provided
 there are eight or more channels per IntelliPort C16 box.
 With one or two boxes connected, the higher the baud rate
 will cause less degredation as more and more channels per
 as more and more channels per IntelliPort C16 box are used.
 Either baud rate may be used with any number of boxes;
 however, connecting three or four boxes at 260,000 will cause
 a decline in performance even if there is no activity on the
 additional boxes."
      CHOICE = "190,000"
        FREE
           INIT = SWITCH(1) LOC(6) 0
        LINK
           MEMORY = 256k
              ADDRESS = 0C00000h | 0C20000h | 0C80000h | 0CA0000h |
                        0D00000h | 0D20000h | 0D80000h | 0DA0000h |
                        0E00000h | 0E20000h | 0E80000h | 0EA0000h |
                        0F00000h | 0F20000h |
                         080000h | 04A0000h | 0580000h | 0680000h |
                        06A0000h | 0780000h | 07A0000h | 0800000h |
                        0820000h | 0880000h | 08A0000h | 0980000h |
                        09A0000h | 0A80000h | 0AA0000h | 0B00000h |
                        0B20000h
              MEMTYPE = OTH
              CACHE   = NO
           INIT = SWITCH(1) LOC(5-1) 
                        10010 | 10011 | 10100 | 10101 |
                        10110 | 10111 | 11000 | 11001 |
                        11010 | 11011 | 11100 | 11101 |
                        11110 | 11111 |
                        00000 | 00001 | 00010 | 00100 |
                        00101 | 00110 | 00111 | 01000 |
                        01001 | 01010 | 01011 | 01100 |
                        01101 | 01110 | 01111 | 10000 |
                        10001
        LINK
           IRQ  = 15 | 12 | 11 | 10 | 5 | 3
           INIT = JUMPER(1) LOC(1-6) 000001 | 000010 | 000100 | 
                                     001000 | 010000 | 100000
      CHOICE = "260,000"
        FREE
           INIT = SWITCH(1) LOC(6) 1
        LINK
           MEMORY = 256k
              ADDRESS = 0C00000h | 0C20000h | 0C80000h | 0CA0000h |
                        0D00000h | 0D20000h | 0D80000h | 0DA0000h |
                        0E00000h | 0E20000h | 0E80000h | 0EA0000h |
                        0F00000h | 0F20000h |
                         080000h | 04A0000h | 0580000h | 0680000h |
                        06A0000h | 0780000h | 07A0000h | 0800000h |
                        0820000h | 0880000h | 08A0000h | 0980000h |
                        09A0000h | 0A80000h | 0AA0000h | 0B00000h |
                        0B20000h
              MEMTYPE = OTH
              CACHE   = NO
           INIT = SWITCH(1) LOC(5-1) 
                        10010 | 10011 | 10100 | 10101 |
                        10110 | 10111 | 11000 | 11001 |
                        11010 | 11011 | 11100 | 11101 |
                        11110 | 11111 |
                        00000 | 00001 | 00010 | 00100 |
                        00101 | 00110 | 00111 | 01000 |
                        01001 | 01010 | 01011 | 01100 |
                        01101 | 01110 | 01111 | 10000 |
                        10001
        LINK
           IRQ  = 15 | 12 | 11 | 10 | 5 | 3
           INIT = JUMPER(1) LOC(1-6) 000001 | 000010 | 000100 | 
                                     001000 | 010000 | 100000