BOARD
  ID       = "ISAB200"
  NAME     = "EVEREX Evercom 24 2400 baud modem"
  MFR      = "EVEREX"
  CATEGORY = "COM"
  LENGTH   = 128
  COMMENTS = "
 The Evercom modem is compatible with the Hayes Smartmodem
 command set and with other major types of modems.  It can
 use 300, 1200, and 2400 baud."

SWITCH(1) = 5
  NAME     = ""
  STYPE    = DIP
  VERTICAL = YES
  FACTORY  = LOC(1-5) 10000
  COMMENTS = "
 This switch is located on the backplane of the card.\n\n
 Switches 1 and 2 select which COM port the modem uses.\n
 Switch 3 determines if the modem allows the DTR signal through\n
          or if it is set to TRUE.\n
 Switch 4 determines how the DCD signal is handled.\n
 Switch 5 determines what kind of connector you are using."

JUMPER(1) = 1
  NAME     = "P2"
  JTYPE    = INLINE
  VERTICAL = YES
  FACTORY  = LOC(1^2) 0
  COMMENTS = "
 This jumper should only be connected if you intend to 
 use the modem in slot 8 or an IBM PC XT."

JUMPER(2) = 1
  NAME     = "P3"
  JTYPE    = INLINE
  VERTICAL = YES
  FACTORY  = LOC(1^2) 0
  COMMENTS = "
 This jumper is connected only if you want to force the
 use of IRQ2"

FUNCTION = "Modem Functions"
  TYPE        = "COM,MDM"
  CONNECTION  = "Two Modular Telephone Jacks"
  SUBFUNCTION = "COM port selection"
    COMMENTS = "
 The IRQ2 choices should only be used if there
 is a conflict with other serial devices."
    CHOICE = "COM2, IRQ3"
      FREE
        INIT = SWITCH(1) LOC(1 2) 10
        IRQ  = 3
        PORT = 02F8h-02FFh
    CHOICE = "COM1, IRQ4"
      FREE
        INIT = SWITCH(1) LOC(1 2) 00
        IRQ  = 4
        PORT = 03F8h-03FFh
    CHOICE = "COM3, IRQ4"
      FREE
        INIT = SWITCH(1) LOC(1 2) 01
        IRQ  = 4
        PORT = 03E8h-03EFh
    CHOICE = "COM4, IRQ3"
      FREE
        INIT = SWITCH(1) LOC(1 2) 11
        IRQ  = 3
        PORT = 02E8h-02EFh
    CHOICE = "COM2, IRQ2"
      FREE
        INIT = SWITCH(1) LOC(1 2) 10
        INIT = JUMPER(2) LOC(1^2) 1
        IRQ  = 3
        PORT = 02F8h-02FFh
    CHOICE = "COM1, IRQ2"
      FREE
        INIT = SWITCH(1) LOC(1 2) 00
        INIT = JUMPER(2) LOC(1^2) 1
        IRQ  = 4
        PORT = 03F8h-03FFh
    CHOICE = "COM3, IRQ2"
      FREE
        INIT = SWITCH(1) LOC(1 2) 01
        INIT = JUMPER(2) LOC(1^2) 1
        IRQ  = 4
        PORT = 03E8h-03EFh
    CHOICE = "COM4, IRQ2"
      FREE
        INIT = SWITCH(1) LOC(1 2) 11
        INIT = JUMPER(2) LOC(1^2) 1
        IRQ  = 3
        PORT = 02E8h-02EFh

  SUBFUNCTION = "DTR Signal"
    CHOICE = "DTR from the computer."
      FREE
        INIT = SWITCH(1) LOC(3) 0
    CHOICE = "DTR is always on."
      FREE
        INIT = SWITCH(1) LOC(3) 1

  SUBFUNCTION = "DCD Signal"
    CHOICE = "DCD follows the true carrier signal."
      FREE
        INIT = SWITCH(1) LOC(4) 0
    CHOICE = "DCD is always true."
      FREE
        INIT = SWITCH(1) LOC(4) 1

  SUBFUNCTION = "Type of modular telephone connector"
    CHOICE = "RJ11,RJ14,RJ41S, or RJ45 connector"
      FREE
        INIT = SWITCH(1) LOC(5) 0
    CHOICE = "RJ12 or RJ13 connector"
      FREE
        INIT = SWITCH(1) LOC(5) 1

  SUBFUNCTION = "Using slot 8 of an IBM PC XT"
    CHOICE = "no"
      FREE
        INIT = JUMPER(1) LOC(1^2) 0
    CHOICE = "yes"
      FREE
        INIT = JUMPER(2) LOC(1^2) 1