BOARD
     ID   = "MDCB000"
     NAME = "M-DCB board"
     MFR  = "PROCOMP USA, Inc"
     CATEGORY = "MSD"
     SLOT     = ISA16
     LENGTH   = 334
     READID   = NO
     COMMENTS = "PROCOMP M-DCB /Disk Coprocessor Board/"


JUMPER(1) = 1
     NAME = "Test Jumper"
     JTYPE = TRIPOLE
     VERTICAL = YES
     REVERSE  = YES
     LABEL    = LOC(1) "JP0"
     INITVAL  = LOC(1) 1

JUMPER(2) = 3
     NAME = "Channel Selector"
     JTYPE   = TRIPOLE
     VERTICAL= NO
     REVERSE = YES
     LABEL   = LOC(1-3) "JP2" "JP1" "JP3"
     COMMENTS = "Note: JP1 is a non used jumper."

JUMPER(3) = 2
     NAME = "UPS switch"
     JTYPE = TRIPOLE
     VERTICAL = NO
     REVERSE = YES
     LABEL = LOC(1 2) "JP4" "JP5"
     FACTORY = LOC(1 2) 11
     COMMENTS = "( UPS = Uninterruptable Power Supply )"


FUNCTION = "DCB channel selection"
     CHOICE = "Select Channel 1"
     LINK
          PORT = 340h-346h
          IRQ  = 0Bh
	  INIT = JUMPER(2)LOC(1-3) 111
     CHOICE = "Select Channel 2"
     LINK
          PORT = 348h-34Eh
          IRQ  = 0Ch
	  INIT = JUMPER(2)LOC(1-3) 010
     CHOICE = "Select Channel 3"
     LINK
          PORT = 320h-326h
          IRQ  = 0Ah
	  INIT = JUMPER(2)LOC(1-3) 110
     CHOICE = "Select Channel 4"
     LINK
          PORT = 328h-32Eh
          IRQ  = 0Fh
	  INIT = JUMPER(2)LOC(1-3) 011


FUNCTION = "Uninterruptable Power Supply"
     CHOICE = "Battery Low:0, On-Line:0"
     FREE
	  INIT = JUMPER(3)LOC(1 2) 11
     CHOICE = "Battery Low:1, On-Line:0"
     FREE
	  INIT = JUMPER(3)LOC(1 2) 01
     CHOICE = "Battery Low:0, On-Line:1"
     FREE
	  INIT = JUMPER(3)LOC(1 2) 10
     CHOICE = "Battery Low:1, On-Line:1"
     FREE
	  INIT = JUMPER(3)LOC(1 2) 00