; ICL Serial Adapter Configuration File
;

BOARD
    ID        = "NDSC010"
    NAME      = "ICL Serial Adapter"
    MFR       = "ICL"
    CATEGORY  = "COM"
    SLOT      = ISA16
    LENGTH    = 265
    AMPERAGE  = 200
    SKIRT     = NO                          ;default
    READID    = NO                          ;default
    IOCHECK   = INVALID
    DISABLE   = UNSUPPORTED
    COMMENTS  = "ICL Serial Adapter board:\n
    - Two RS232 serial ports with 9-pin connectors."


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

JUMPER(2)     = 14
    NAME      = "Serial Port 1"
    JTYPE     = PAIRED
    REVERSE   = YES
    LABEL     = LOC(1-14) "ON" "OFF" "COM1" "COM2" "COM3" "COM4"
                "OFF" "IRQ3" "IRQ4" "IRQ5" "IRQ9"
                "IRQ10" "IRQ11" "IRQ15"
    FACTORY   = LOC(1-14) 10001000000001
    COMMENTS  = "Serial port 1. Select enable, I/O-address and IRQ."

JUMPER(3)     = 14
    NAME      = "Serial Port 2"
    JTYPE     = PAIRED
    REVERSE   = YES
    LABEL     = LOC(1-14) "ON" "OFF" "COM1" "COM2" "COM3" "COM4"
                "OFF" "IRQ3" "IRQ4" "IRQ5" "IRQ9"
                "IRQ10" "IRQ11" "IRQ15"
    FACTORY   = LOC(1-14) 10000100000010
    COMMENTS  = "Serial port 2. Select enable, I/O-address and IRQ."

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

GROUP = "NFA Serial Port 1 "
    TYPE  = "COM, ASY"
    FUNCTION   = "Serial Port 1 Configuration"
    COMMENTS   = "Set jumper J2 location 1-6."
    HELP       = "Jumper J2 location 1-6 Enables/Disables I/O-address
                  for Serial Port 1:\n
                        \t100001=2E8h-2EFh    100010=3E8h-3EFh\n
                        \t100100=2F8h-2FFh    101000=3E8h-3EFh\n
                        \t01xxxx=OFF"
    CONNECTION = "NFA external DB9, middle"
        CHOICE = "COM3    - default (3E8h-3EFh)"
            FREE
            PORT   = 3E8h-3EFh
            INIT   = JUMPER(2) LOC(1-6) 100010
        CHOICE = "COM2 (2F8h-2FFh)"
            FREE
            PORT   = 2F8h-2FFh
            INIT   = JUMPER(2) LOC(1-6) 100100
        CHOICE = "COM4 (2E8h-2EFh)"
            FREE
            PORT   = 2E8h-2EFh
            INIT   = JUMPER(2) LOC(1-6) 100001
        CHOICE = "OFF"
            FREE
            INIT   = JUMPER(2) LOC(1 2) 01

    FUNCTION   = "Serial Port 1 IRQ"
    COMMENTS   = "Set jumper J2 location 7-14."
    HELP       = "Jumper J2 location 7-14 Enables/Disables IRQ
                  for Serial Port 1:\n
                        \t00000001=IRQ15   00000010=IRQ11\n
                        \t00000100=IRQ10   00001000=IRQ9\n
                        \t00010000=IRQ5    00100000=IRQ4\n
                        \t01000000=IRQ3\n
                        \t10xxxxxx=OFF"
        CHOICE = "IRQ15   - default"
            FREE
            IRQ    = 15
            INIT   = JUMPER(2) LOC(7-14) 00000001
        CHOICE = "IRQ3"
            FREE
            IRQ    = 3
            INIT   = JUMPER(2) LOC(7-14) 01000000
        CHOICE = "IRQ4"
            FREE
            IRQ    = 4
            INIT   = JUMPER(2) LOC(7-14) 00100000
        CHOICE = "IRQ5"
            FREE
            IRQ    = 5
            INIT   = JUMPER(2) LOC(7-14) 00010000
        CHOICE = "IRQ9"
            FREE
            IRQ    = 9
            INIT   = JUMPER(2) LOC(7-14) 00001000
        CHOICE = "IRQ10"
            FREE
            IRQ    = 10
            INIT   = JUMPER(2) LOC(7-14) 00000100
        CHOICE = "IRQ11"
            FREE
            IRQ    = 11
            INIT   = JUMPER(2) LOC(7-14) 00000010
        CHOICE = "OFF"
            FREE
            INIT   = JUMPER(2) LOC(7-14) 10000000
ENDGROUP

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

GROUP = "NFA Serial Port 2 "
    TYPE  = "COM, ASY"
    FUNCTION   = "Serial Port 2 Configuration"
    COMMENTS   = "Set jumper J3 location 1-6."
    HELP       = "Jumper J3 location 1-6 Enables/Disables I/O-address
                  for Serial Port 2:\n
                        \t100001=2E8h-2EFh    100010=3E8h-3EFh\n
                        \t100100=2F8h-2FFh    101000=3E8h-3EFh\n
                        \t01xxxx=OFF"
    CONNECTION = "NFA external DB9, lower"
        CHOICE = "COM4    - default (2E8h-2EFh)"
            FREE
            PORT   = 2E8h-2EFh
            INIT   = JUMPER(3) LOC(1-6) 100001
        CHOICE = "COM2 (2F8h-2FFh)"
            FREE
            PORT   = 2F8h-2FFh
            INIT   = JUMPER(3) LOC(1-6) 100100
        CHOICE = "COM3 (3E8h-3EFh)"
            FREE
            PORT   = 3E8h-3EFh
            INIT   = JUMPER(3) LOC(1-6) 100010
        CHOICE = "OFF"
            FREE
            INIT   = JUMPER(3) LOC(1 2) 01

    FUNCTION   = "Serial Port 2 IRQ"
    COMMENTS   = "Set jumper J3 location 7-14."
    HELP       = "Jumper J3 location 7-14 Enables/Disables IRQ
                  for Serial Port 2:\n
                        \t00000001=IRQ15   00000010=IRQ11\n
                        \t00000100=IRQ10   00001000=IRQ9\n
                        \t00010000=IRQ5    00100000=IRQ4\n
                        \t01000000=IRQ3\n
                        \t10xxxxxx=OFF"
        CHOICE = "IRQ11   - default"
            FREE
            IRQ    = 11
            INIT   = JUMPER(3) LOC(7-14) 00000010
        CHOICE = "IRQ3"
            FREE
            IRQ    = 3
            INIT   = JUMPER(3) LOC(7-14) 01000000
        CHOICE = "IRQ4"
            FREE
            IRQ    = 4
            INIT   = JUMPER(3) LOC(7-14) 00100000
        CHOICE = "IRQ5"
            FREE
            IRQ    = 5
            INIT   = JUMPER(3) LOC(7-14) 00010000
        CHOICE = "IRQ9"
            FREE
            IRQ    = 9
            INIT   = JUMPER(3) LOC(7-14) 00001000
        CHOICE = "IRQ10"
            FREE
            IRQ    = 10
            INIT   = JUMPER(3) LOC(7-14) 00000100
        CHOICE = "IRQ15"
            FREE
            IRQ    = 15
            INIT   = JUMPER(3) LOC(7-14) 00000001
        CHOICE = "OFF"
            FREE
            INIT   = JUMPER(3) LOC(7-14) 10000000
ENDGROUP