;   NEC Video Graphics Board (VGB)
;
;   Board indentification block
;
  BOARD
    ID		  = "NEC0002"
    NAME	  = "NEC Video Graphics Board (VGB)"
    MFR 	  = "NEC"
    CATEGORY	  = "VID"
    SLOT	  = ISA16
    LENGTH        = 171
    COMMENTS	  = "NEC Video Graphics Board (VGB) allows you to connect
                    the display to your system unit."
    HELP	  = "This is the VGB"


  SOFTWARE(1) ="
   \nIf the video standard that the VGB board is to emulate is not VGA,
     the program VGA.EXE should be executed to set the appropriate
     standard.  The program is located on the VGB Utilities Diskette.  
     Instructions can be found in the VGB Installation Manual.  
   \n"

;
;   Jumper Definitions
  JUMPER(1)	  = 1
    NAME	  = "S1"
    JTYPE	  = TRIPOLE
    VERTICAL	  = YES
    REVERSE	  = NO
    LABEL	  = LOC(1) "Ext/HiRes" 
    INITVAL	  = LOC(1) 1
    COMMENTS	  = "Oscillator Setting.  
		    The S1 jumper selects high-resolution oscillator used
		    for 132-column mode, and 800 X 600 graphics when in the
		    right position (factory setting). The left position
		    selects an external oscillator setting.
		    Please note:  The Factory Setting should NOT be changed!
		    The S1 jumper is located at the bottom of the board and
		    is the only horizontal jumper on the board."
    HELP	  = "Help for VGB Jumper 1"


  JUMPER(2)	  = 2
    NAME	  = "S2"
    JTYPE	  = INLINE
    VERTICAL 	  = YES
    REVERSE	  = YES
    LABEL	  = LOC(1^2 2^3) "16 bits" "8 bits"
    INITVAL	  = LOC(1^2) 1
    COMMENTS	  = "BIOS ROM data path.
		     
		     The S2 jumper selects 16-bit BIOS ROM data path when in
		     the upper position (factory setting). The lower position
		     selects an 8-bit data path.
   		     
		     The S2 Jumper is the jumper closest to the top of the 
		     board and is located above the other two jumpers.  It
		     is one of two vertical jumpers on the board."
    HELP	  =  "Help for VGB Jumper 2"

  JUMPER(3)	  = 2
    NAME	  = "S3"
    JTYPE	  = INLINE
    VERTICAL      = YES
    REVERSE	  = YES
    LABEL	  = LOC(1^2 2^3) "Disabled" "Enabled"
    INITVAL	  = LOC(2^3) 1
    COMMENTS	  = "Sensing of 8 or 16 bit data transfer.
		     The S3 jumper enables option slot sense of 16 or 8-bit 
		     data transfer when in the lower position (factory setting).
		     The upper position disables the option slot sense.
    		     
		     The 'Enable' setting is used to sense if 16-bit
		     data transfer is available for the slot in which the
		     VGB is installed. If 16-bit data transfer is not
		     available, 8-bit data transfer is selected.  The 
		    'Disable' setting assumes an 8-bit transfer.
		
		     Jumper 3 is located below Jumper 2."

    HELP	  = "This is Help for VGB Jumper 3"


FUNCTION="VGA Plus Config Options"
 TYPE="VID"
 HELP="
 Use E)dit Change F)unction to Select Options.
 \n
 \n"
 CHOICE="Graphics: Color or Mono"
 LINK
 PORT=03B0h-03BBh
 PORT=03C0h-03CFh
 PORT=03D0h-03DFh
 PORT=46E8h
 LINK
 MEMORY=64K
 ADDRESS=0A0000h
 MEMTYPE=OTH
 LINK
 MEMORY=32K
 ADDRESS=0B0000h
 MEMTYPE=OTH
 LINK
 MEMORY=32K
 ADDRESS=0B8000h
 MEMTYPE=OTH
 LINK
 MEMORY=24K
 ADDRESS=0C0000h
 MEMTYPE=OTH
 WRITABLE=NO
 LINK
 MEMORY=6K
 ADDRESS=0C6800h
 MEMTYPE=OTH
 WRITABLE=NO
 CHOICE="Graphics: Color"
 LINK
 PORT=03C0h-03CFh
 PORT=03D0h-03DFh
 PORT=46E8h
 LINK
 MEMORY=64K
 ADDRESS=0A0000h
 MEMTYPE=OTH
 LINK
 MEMORY=32K
 ADDRESS=0B8000h
 MEMTYPE=OTH
 LINK
 MEMORY=24K
 ADDRESS=0C0000h
 MEMTYPE=OTH
 WRITABLE=NO
 LINK
 MEMORY=6K
 ADDRESS=0C6800h
 MEMTYPE=OTH
 WRITABLE=NO
 CHOICE="Graphics: Mono"
 LINK
 PORT=03B0h-03BBh
 PORT=03C0h-03CFh
 PORT=46E8h
 LINK
 MEMORY=64K
 ADDRESS=0A0000h
 MEMTYPE=OTH
 LINK
 MEMORY=32K
 ADDRESS=0B0000h
 MEMTYPE=OTH
 LINK
 MEMORY=24K
 ADDRESS=0C0000h
 MEMTYPE=OTH
 WRITABLE=NO
 LINK
 MEMORY=6K
 ADDRESS=0C6800h
 MEMTYPE=OTH
 WRITABLE=NO
 CHOICE="Text Only: Color or Mono"
 LINK
 PORT=03B0h-03BBh
 PORT=03C0h-03CFh
 PORT=03D0h-03DFh
 PORT=46E8h
 LINK
 MEMORY=32K
 ADDRESS=0B0000h
 MEMTYPE=OTH
 LINK
 MEMORY=32K
 ADDRESS=0B8000h
 MEMTYPE=OTH
 LINK
 MEMORY=24K
 ADDRESS=0C0000h
 MEMTYPE=OTH
 WRITABLE=NO
 LINK
 MEMORY=6K
 ADDRESS=0C6800h
 MEMTYPE=OTH
 WRITABLE=NO
 CHOICE="Text Only: Color"
 LINK
 PORT=03C0h-03CFh
 PORT=03D0h-03DFh
 PORT=46E8h
 LINK
 MEMORY=32K
 ADDRESS=0B8000h
 MEMTYPE=OTH
 LINK
 MEMORY=24K
 ADDRESS=0C0000h
 MEMTYPE=OTH
 WRITABLE=NO
 LINK
 MEMORY=6K
 ADDRESS=0C6800h
 MEMTYPE=OTH
 WRITABLE=NO
 CHOICE="Text Only: Mono"
 LINK
 PORT=03B0h-03BBh
 PORT=03C0h-03CFh
 PORT=46E8h
 LINK
 MEMORY=32K
 ADDRESS=0B0000h
 MEMTYPE=OTH
 LINK
 MEMORY=24K
 ADDRESS=0C0000h
 MEMTYPE=OTH
 WRITABLE=NO
 LINK
 MEMORY=6K
 ADDRESS=0C6800h
 MEMTYPE=OTH
 WRITABLE=NO