;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;  Copyright (c) 1994  NEC Corporation                              
;  System configuration file, !NEC1C01.CFG
;  for NEC RISC-based Dual CPU Servers
;  Revision 1.00.02
;  Ver.1.00.04 : 5/17/95 : CHOICE="Version 1.00.04"        : CG,NECTECH;
;  Ver.1.00.05 : 9/19/95 : R94D & R96B added to ECU disk   : CG,NECTECH;
;                          CHOICE="Version 1.00.05"                    
;  Ver.1.00.06 : 10/31/95: Fix typo in R96B ECU file       : CG,NECTECH;
;                          CHOICE="Version 1.00.06"                    ;
;  Ver.1.00.07 : 3/19/96 : No change from .06              : RR,NECTECH;
;                                                                      ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

BOARD
ID="NEC1C01"
NAME="NEC MIPS System Board"
MFR="NEC"
CATEGORY="SYS"
SLOT=EMB(0)
READID=NO
SIZING=0
COMMENTS="This NEC RISC-based Dual CPU Server contains one or two MIPS R4400
plug-in cards, and 6 EISA slots"
HELP="This is the Board Identification Block help field
for the NEC RISC-based Dual CPU System board."
SYSTEM
NONVOLATILE=7680
AMPERAGE=31500
SLOT(1)=EISA(1) LENGTH=341 SKIRT=YES BUSMASTER=YES
SLOT(2)=EISA(2) LENGTH=341 SKIRT=YES BUSMASTER=YES
SLOT(3)=EISA(3) LENGTH=341 SKIRT=YES BUSMASTER=YES
SLOT(4)=EISA(4) LENGTH=341 SKIRT=YES BUSMASTER=YES
SLOT(5)=EISA(5) LENGTH=341 SKIRT=YES BUSMASTER=YES
SLOT(6)=EISA(6) LENGTH=341 SKIRT=YES BUSMASTER=YES


JUMPER(1) = 1
 NAME = "J7"
 JTYPE = PAIRED
 VERTICAL = YES
 REVERSE = NO
 LABEL = LOC(1) "VGA Enable"
 INITVAL = LOC(1) 1
 COMMENTS = "This system board jumper enables the on-board
VGA card and disables the VXL high performance video card.\n
\nEnable  = Enable on-board VGA & Disable the VXL video adapter.\n
\nDisable = Disable on-board VGA & Enable the VXL video adapter.\n"

HELP = "This video type jumper is located on the system board in position J7."

FUNCTION="DummySystemType"
SHOW=NO
COMMENTS="Fools s/w into put header at top of file"
HELP="None"
CHOICE="Dummy"


;;Special function for MIPS boards , this is described in the ARC Specification
;; addendum, rev 1.1.

FUNCTION = "*Component* Entry!"
SHOW = NO
TYPE = "CE = other,0"
CHOICE = ""


FUNCTION="VidMem"
TYPE="MEM"
SHOW=NO
CHOICE="OK"
FREE
MEMORY=32K
ADDRESS=0C0000h
WRITABLE=NO
MEMTYPE=OTH


FUNCTION="NEC1C01.CFG Version"
CHOICE="1.00.07"