BOARD
	ID = "NIC0400"
	NAME = "PC-DIO-24 Digital I/O Board"
	MFR = "NATIONAL INSTR CORP"
	CATEGORY = "OTH"
	SLOT = ISA8
	READID = NO
	COMMENTS = "The PC-DIO-24 is a 24-bit parallel digital I/O interface
		    board."
	HELP = "The PC-DIO-24 can operate in either a uni-directional or 
		bidirectional mode, generate interrupt requests, and handshake
		with peripheral equipment for communication and synchronization
		purposes."

SWITCH(1) = 8
	NAME = "Base I/O Address"
	STYPE = DIP
	VERTICAL = NO
	REVERSE = YES
	LABEL = LOC(1-8) "A9" "A8" "A7" "A6" "A5" "A4" "A3" "A2"
	FACTORY = LOC(1-8) 10000100
	COMMENTS = "The base I/O address is determined by the settings of the
		    board dip switches. The factory setting is for base 
		    address 0210h."

JUMPER(1) = 6
	NAME = "IRQ Level"
	JTYPE = PAIRED
	REVERSE = YES
	LABEL = LOC(1-6) "3" "4" "5" "6" "7" "9"
	FACTORY = LOC(3) 1
	COMMENTS = "The interrupt level used is determined by this jumper.
		    Do not use interrupt level 6 as it is normally used by the 
		    diskette and hard disk controllers."

FUNCTION = "PC-DIO-24 Base I/O Address"
	COMMENTS = "The base I/O address is selected through this resource."
	HELP = "The base I/O address entered here must match the board 
		dip switch setting for the base address. See the user's 
		manual of the board for more information."
	CHOICE = "Base I/O Address Resource"
		SUBCHOICE
		FREE
			PORT = 210h-3ffh STEP = 04h
			SHARE = NO
			INIT = SWITCH(1) LOC(1-8) 10000100 | 10000101 |
			10000110 | 10000111 | 10001000 | 10001001 |
			10001010 | 10001011 | 10001100 | 10001101 |
			10001110 | 10001111 | 10010000 | 10010001 |
			10010010 | 10010011 | 10010100 | 10010101 |
			10010110 | 10010111 | 10011000 | 10011001 |
			10011010 | 10011011 | 10011100 | 10011101 |
			10011110 | 10011111 | 10100000 | 10100001 |
			10100010 | 10100011 | 10100100 | 10100101 |
			10100110 | 10100111 | 10101000 | 10101001 |
			10101010 | 10101011 | 10101100 | 10101101 |
			10101110 | 10101111 | 10110000 | 10110001 |
			10110010 | 10110011 | 10110100 | 10110101 |
			10110110 | 10110111 | 10111000 | 10111001 |
			10111010 | 10111011 | 10111100 | 10111101 |
			10111110 | 10111111 | 11000000 | 11000001 |
			11000010 | 11000011 | 11000100 | 11000101 |

			11000110 | 11000111 | 11001000 | 11001001 |
			11001010 | 11001011 | 11001100 | 11001101 |
			11001110 | 11001111 | 11010000 | 11010001 |
			11010010 | 11010011 | 11010100 | 11010101 |
			11010110 | 11010111 | 11011000 | 11011001 |
			11011010 | 11011011 | 11011100 | 11011101 |
			11011110 | 11011111 | 11100000 | 11100001 |
			11100010 | 11100011 | 11100100 | 11100101 |
			11100110 | 11100111 | 11101000 | 11101001 |
			11101010 | 11101011 | 11101100 | 11101101 |
			11101110 | 11101111 | 11110000 | 11110001 |
			11110010 | 11110011 | 11110100 | 11110101 |
			11110110 | 11110111 | 11111000 | 11111001 |
			11111010 | 11111011 | 11111100 | 11111101 |
			11111110 | 11111111 

		SUBCHOICE
		FREE
			PORT = 000h-210h STEP = 04h
			SHARE = NO
			INIT = SWITCH(1) LOC(1-8) 00000000 | 00000001 |
			00000010 | 00000011 | 00000100 | 00000101 |
			00000110 | 00000111 | 00001000 | 00001001 |
			00001010 | 00001011 | 00001100 | 00001101 |
			00001110 | 00001111 | 00010000 | 00010001 |
			00010010 | 00010011 | 00010100 | 00010101 |
			00010110 | 00010111 | 00011000 | 00011001 |
			00011010 | 00011011 | 00011100 | 00011101 |
			00011110 | 00011111 | 00100000 | 00100001 |
			00100010 | 00100011 | 00100100 | 00100101 |
			00100110 | 00100111 | 00101000 | 00101001 |
			00101010 | 00101011 | 00101100 | 00101101 |
			00101110 | 00101111 | 00110000 | 00110001 |
			00110010 | 00110011 | 00110100 | 00110101 |
			00110110 | 00110111 | 00111000 | 00111001 |
			00111010 | 00111011 | 00111100 | 00111101 |
			00111110 | 00111111 | 01000000 | 01000001 |

			01000010 | 01000011 | 01000100 | 01000101 |
			01000110 | 01000111 | 01001000 | 01001001 |
			01001010 | 01001011 | 01001100 | 01001101 |
			01001110 | 01001111 | 01010000 | 01010001 |
			01010010 | 01010011 | 01010100 | 01010101 |
			01010110 | 01010111 | 01011000 | 01011001 |
			01011010 | 01011011 | 01011100 | 01011101 |
			01011110 | 01011111 | 01100000 | 01100001 |
			01100010 | 01100011 | 01100100 | 01100101 |
			01100110 | 01100111 | 01101000 | 01101001 |
			01101010 | 01101011 | 01101100 | 01101101 |
			01101110 | 01101111 | 01110000 | 01110001 |
			01110010 | 01110011 | 01110100 | 01110101 |
			01110110 | 01110111 | 01111000 | 01111001 |
			01111010 | 01111011 | 01111100 | 01111101 |
			01111110 | 01111111 | 10000000 | 10000001 |
			10000010 | 10000011 		 

FUNCTION = "PC-DIO-24 Interrupt Request Level"
	COMMENTS = "The interrupt level is selected through this function. If
		    the 'Disabled' option is selected, the driver will not
		    use the interrupt resource."
	HELP = "The interrupt level selected here must match the board jumper
 		setting for the interrupt level. See the user's manual of the 
		board for more information."
;SHARE statement in the choices is omitted as default is NO
;TRIGGER statement in the choices is omitted as default is EDGE
	CHOICE = "5"
	FREE
		IRQ = 5 
	 	INIT = JUMPER(1) LOC(1-6) 001000
	CHOICE = "6"
	FREE
		IRQ = 6 
	 	INIT = JUMPER(1) LOC(1-6) 000100
	CHOICE = "7"
	FREE
		IRQ = 7 
	 	INIT = JUMPER(1) LOC(1-6) 000010
	CHOICE = "9"
	FREE
		IRQ = 9 
	 	INIT = JUMPER(1) LOC(1-6) 000001
	CHOICE = "Disabled"
        FREE
	 	INIT = JUMPER(1) LOC(1-6) 000000
	CHOICE = "3"
	FREE
		IRQ = 3 
	 	INIT = JUMPER(1) LOC(1-6) 100000
	CHOICE = "4"
	FREE
		IRQ = 4 
	 	INIT = JUMPER(1) LOC(1-6) 010000