BOARD				     			       
	ID = "NICC302"
	NAME = "National Instruments AT-GPIB/TNT"
	MFR = "NATIONAL INSTR CORP"
	CATEGORY = "COM"
	SLOT = ISA16
	READID = NO
        LENGTH = 165                               ;16.5cm = 6.5inches
        AMPERAGE = 100 		   		   ;0.1 Amps
        SKIRT = NO
	COMMENTS = "The AT-GPIB/TNT is a High Performance IEEE-488 interface board.
                    If any of the switch or jumper settings are different from the
                    defaults expected by your driver software, you must reconfigure
                    your software to match the switch and jumper settings on the board.
                    Refer to the manual that came with your driver software for
                    information on how to do this.  For further information call
                    National Instruments at 1-800-433-3488."
	HELP = "Sorry, no help available."

SWITCH(1) = 5
	NAME = "Base I/O Address (SW1)"
	STYPE = DIP
	VERTICAL = YES
	REVERSE = YES
	LABEL = LOC(1-5) "9" "8" "7" "6" "5" 
	FACTORY = LOC(1-5) 01001
	COMMENTS = "The base I/O address is determined by the settings of the DIP
                    switch (SW1)."


JUMPER(1) = 11
	NAME = "DMA/High IRQ  (W1)"
	JTYPE = PAIRED
	VERTICAL = NO
	REVERSE = YES
	LABEL = LOC(1-11) "DRQ7" "DACK7" "DRQ6" "DACK6" "DRQ5" "DACK5" "IRQ15" "IRQ14" "IRQ12" "IRQ11" "IRQ10"
	FACTORY = LOC(1-11) 00001100010
        ;Factory defaults - DACK5,DRQ5, and IRQ11                                                             
	COMMENTS = "The DMA channel used is determined by this jumper.
		    Note that both DRQ (request) and DACK (acknowledge) jumpers must
		    be set to the same channel if that channel is to be used. In addition,
		    the high IRQ levels (10, 11, 12, 14, and 15) are selected by this jumper."

		    
JUMPER(2) = 6
	NAME = "Low IRQ Level (W2)"
	JTYPE = PAIRED
	VERTICAL = NO
	REVERSE = YES
	LABEL = LOC(1-6) "IRQ3" "IRQ4" "IRQ5" "IRQ6" "IRQ7" "IRQ9"
	FACTORY = LOC(1-6) 000000
        ;Factory default is IRQ11 
	COMMENTS = "The low IRQ levels (3, 4, 5, 6, 7, and 9) are
		    selected by this jumper.  Only one of the high
		    IRQ or low IRQ levels should be selected."


FUNCTION = "AT-GPIB/TNT Base I/O Address"
	COMMENTS = "The base I/O address is selected through this resource."
	HELP = "Sorry, no help available."
        ;SHARE statement in the choices is omitted as default is NO
        ;SIZE statement in the choices is omitted as default is WORD
           CHOICE = "Base I/O Address Resource"
	     SUBCHOICE
               	FREE
                    PORT = 2C0h
                    ;allocates first default setting
                    INIT = SWITCH(1) LOC(1-5) 01001
 
	     SUBCHOICE
              	FREE
                    PORT = 2E0h
                    ;allocates second default setting
                    INIT = SWITCH(1) LOC(1-5) 01000

              SUBCHOICE
		 FREE
		    PORT = 100h-1FFh STEP = 020h
		    ;allocates 8 ports: 100h-11Fh or 120h-13Fh or 140h-15Fh or 160h-17Fh or
		    ;			180h-19Fh or 1A0h-1BFh or 1C0h-1DFh or 1E0h-1FFh
		    INIT = SWITCH(1) LOC(1-5) 10111 | 10110 | 10101 | 10100 | 10011 |
			   10010 | 10001 | 10000 

	     SUBCHOICE
                 FREE
                    PORT = 200h-2BFh STEP = 020h
                    ;allocates 6 ports:  200h-21Fh or 320h-4Fh or 240h-25Fh or 260h-27Fh
		    ;		         280h-29Fh or 2A0h-2BFh
		    INIT = SWITCH(1) LOC(1-5)  01111 | 01110 | 01101 | 01100 | 01011 |
			   01010

             SUBCHOICE
	         FREE
		    PORT = 300h-3FFh STEP = 020h
 		    ;allocates 8 ports: 300h-31Fh or 320h-33Fh or 340h-35Fh or 360h-37Fh or
		    ;			380h-39Fh or 3A0h-3BFh or 3C0h-3DFh or 3E0h-3FFh
		    INIT = SWITCH(1) LOC(1-5)  00111 | 00110 | 00101 | 00100 | 00011 |
			   00010 | 00001 | 00000


FUNCTION = "AT-GPIB DMA Channel"
	COMMENTS = "The DMA channel is selected through this function."
	HELP = "Sorry, no help available."
        ;SHARE statement in the choices is omitted as default is NO
        ;SIZE statement in the choices is omitted as default is WORD for channels 4-7
        ;TIMING statement in the choices is omitted as default is DEFAULT
	   CHOICE = "5"
                ;allocates first DMA default
	        FREE
		DMA = 5
		INIT = JUMPER(1) LOC(1-6) 000011
           CHOICE = "6"
	        FREE
		DMA = 6
		INIT = JUMPER(1) LOC(1-6) 001100
	   CHOICE = "7"
	        FREE
               	DMA = 7
		INIT = JUMPER(1) LOC(1-6) 110000
          CHOICE = "Disabled"
	        FREE
		INIT = JUMPER(1) LOC(1-6) 000000

FUNCTION = "AT-GPIB Interrupt Request Level"
	COMMENTS = "The interrupt level is selected through this function."
	HELP = "Sorry, no help available."
        ;SHARE statement in the choices is omitted as default is NO
        ;TRIGGER statement in the choices is omitted as default is EDGE
	   CHOICE = "11"
	        FREE
                ;allocates first IRQ default
		IRQ = 11
                INIT = JUMPER(1) LOC(7-11) 00010
	        INIT = JUMPER(2) LOC(1-6)  000000
 	   CHOICE = "10"
	        FREE
		;allocates second IRQ default
		IRQ = 10
                INIT = JUMPER(1) LOC(7-11) 00001
		INIT = JUMPER(2) LOC(1-6)  000000
	   CHOICE = "5"	     
	        FREE
		IRQ = 5
                INIT = JUMPER(2) LOC(1-6)  001000
	 	INIT = JUMPER(1) LOC(7-11) 00000
	   CHOICE = "7"
	        FREE
		IRQ = 7
                INIT = JUMPER(2) LOC(1-6)  000010
	 	INIT = JUMPER(1) LOC(7-11) 00000
  	   CHOICE = "9"	     
	        FREE
		IRQ = 9
                INIT = JUMPER(2) LOC(1-6)  000001
	 	INIT = JUMPER(1) LOC(7-11) 00000
	   CHOICE = "12"
	        FREE
		IRQ = 12
                INIT = JUMPER(1) LOC(7-11) 00100
		INIT = JUMPER(2) LOC(1-6)  000000
	   CHOICE = "3"
	        FREE
		IRQ = 3
                INIT = JUMPER(2) LOC(1-6 ) 100000
		INIT = JUMPER(1) LOC(7-11) 00000
	   CHOICE = "4"
	        FREE
		IRQ = 4
                INIT = JUMPER(2) LOC(1-6)  010000
		INIT = JUMPER(1) LOC(7-11) 00000
	   CHOICE = "15"
	        FREE
		IRQ = 15
                INIT = JUMPER(1) LOC(7-11) 10000
		INIT = JUMPER(2) LOC(1-6)  000000
 	    CHOICE = "Disabled"
	        FREE
		INIT = JUMPER(1) LOC(7-11) 00000
	 	INIT = JUMPER(2) LOC(1-6)  000000