; Olivetti 486/33 Secondary CPU Board 2.0 Configuration File rev 1.02

BOARD
  ID = "OLI10D1"
  NAME = "Olivetti 486 Secondary CPU Board Rev. 2.0"
  MFR = "OLIVETTI"
  CATEGORY = "CPU"
  SLOT = OTH,"SCPU"
  READID = YES
  AMPERAGE = 1000

IOPORT(1) = 0zC90h		;Config Register 0
  INITVAL = 0000000xb		;Note: Bit 0 486 Internal Cache enable

IOPORT(2) = 0zC91h		;Config Register 1
IOPORT(3) = 0zC92h		;Status/ERROR Register 0
IOPORT(4) = 0zC93h		;Status/ERROR Register 1
IOPORT(5) = 0zC94h		;2nd Level CACHE Policy Register
  INITVAL = xxx10001b

IOPORT(6) = 0zC95h		;ELCR for 8259 Controller #1
  INITVAL = xxxxx000b

IOPORT(7) = 0zC96h		;ELCR for 8259 Controller #2
  INITVAL = xx0xxxx0b

IOPORT(8) = 0zC97h		;CPU Diagnostic Register
IOPORT(9) = 0C70h		;CPU WHO-AM-I Register
IOPORT(10) = 0zC6Ah		;CPU Control Port 0 Register
   INITVAL = 0000xx00b

IOPORT(11) = 0zC88h		;Secondary id byte register
IOPORT(12) = 0zC89h		;Secondary id byte register
IOPORT(13) = 0zC8Ah		;Secondary id byte register
IOPORT(14) = 0zC8Bh		;Secondary id byte register
IOPORT(15) = 0zCA2h		;CPU Control Port 1 Register
IOPORT(16) = 0zCB2h		;CPU Board Local Self-Test Results Register

FUNCTION = "Secondary CPU Board"
  TYPE = "CPU,80486"
  CHOICE = "Present"