;
;
;  CONFIGURATION FILE FOR BOARD  NCU 9143
;  Rev. 1.03
;
;

BOARD
   ID = "OLIF051"
   NAME = "OLIVETTI  NCU 9143"
   MFR = "OLIVETTI"
   CATEGORY = "NET"
   SLOT = ISA8OR16
   LENGTH = 240
   COMMENTS =
"The board operates at 16bit only if it is
inserted in AT slot (16bit) and if its
memory address is 0C0000h.
\n When the board is configured in mega F
the address selected in the 'UTP_Ethernet Adapter'
function must correspond to the address in the
'UTP_Ethernet Adapter in Mega F' function
(see below list).
\n 0d0000h = 0f60000h in Mega F
\n 0d8000h = 0f80000h  '   '  '
\n 0c0000h = 0f20000h  '   '  '
\n 0c8000h = 0f40000h  '   '  '
\nNote: the IRQ2 interrupt in the XT machine
is equivalent to the IRQ9 in the AT machine."

JUMPER(1) = 2
   JTYPE = inline
   NAME = "M1"
   REVERSE = yes
   LABEL = LOC(1 2 3) "1" "2" "3"
   FACTORY = LOC(1^2 2^3) 10

JUMPER(2) = 2
   JTYPE = inline
   NAME = "M2"
   REVERSE = yes
   LABEL = LOC(1 2 3) "1" "2" "3"
   FACTORY = LOC(1^2 2^3) 01

SOFTWARE(1) =  "
To modify the Interrupt (see NCU 9143
TEST PROGRAM for full details of other
options) it is needed to load the
program:"

FUNCTION = "UTP_Ethernet Adapter"
   TYPE = "NET"
   CHOICE = "32k Memory (default)"
      COMBINE
         MEMORY = 32k
            ADDRESS = 0d0000h | 0d8000h | 0c0000h | 0c8000h
            MEMTYPE = oth
            SIZE = word
            CACHE = no
         INIT = JUMPER(1) LOC(1^2 2^3) 10 | 10 | 01 | 01
         INIT = JUMPER(2) LOC(1^2 2^3) 01 | 10 | 01 | 10
   CHOICE = "64k Memory"
      COMBINE
         MEMORY = 64k
            ADDRESS = 0c0000h | 0d0000h
            MEMTYPE = oth
            SIZE = word
            CACHE = no
         INIT = JUMPER(1) LOC(1^2 2^3) 01 | 10
         INIT = JUMPER(2) LOC(1^2 2^3) 01 | 01

FUNCTION = "UTP_Ethernet Adapter in mega F"
   TYPE = "NET"
   CHOICE = "DISABLE  (default)"
      DISABLE = yes
   CHOICE = "ENABLE"
      COMBINE
         MEMORY = 128k
            ADDRESS = 0f60000h | 0f80000h | 0f20000h | 0f40000h
            MEMTYPE = oth
            SIZE = word
            CACHE = no
         INIT = JUMPER(1) LOC(1^2 2^3) 10 | 10 | 01 | 01
         INIT = JUMPER(2) LOC(1^2 2^3) 01 | 10 | 01 | 10

FUNCTION = "UTP_Ethernet Adapter"
   TYPE = "NET"
   CHOICE = "Interrupt"
      FREE
         IRQ = 3 | 5 | 7 | 2 | 10 | 12 | 15
         INIT = SOFTWARE(1) "NCUTST"