BOARD
   ID = "OLIF0A1"
   NAME = "OLIVETTI  NPU 9144"
   MFR = "OLIVETTI"
   CATEGORY = "NET"
   SLOT = ISA8OR16
   LENGTH = 336
   COMMENTS =
"The NPU9144 board is factory setted for
8bit operations.
If 16bit operation is desired, be sure
the switch settings are correct and the
card is in a 16bit slot or it will not
work.\n
Note: the IRQ 2 interrupt in the XT
machine is equivalent to IRQ 9 in the AT
machine.\n
CAUTION: The switches are drawn using
the standard edge connect down, bracket
on the right view, which for this board
is upside down. Hold the board in the
STANDARD manner (edge connector down)
when checking the switches against the
switch drawings provided by this
utility."

JUMPER(1) = 10
   JTYPE = paired
   NAME = "INT / DMA"
   LABEL = LOC(10 9 8 7 6 5 4 3 2 1) "3" "4" "5" "6" "7" "9" "1" "1" "3" "3"
   FACTORY = LOC(10-1) 1000001100
   COMMENTS =
"Jumper is labeled upside-down"

JUMPER(2) = 13
   JTYPE = paired
   NAME = "DMA / INT"
   LABEL = LOC(13 12 11 10 9 8 7 6 5 4 3 2 1) "7" "7" "6" "6" "5" "5" "0" "0" "14" "15" "12" "11" "10"
   COMMENTS =
"Jumper is labeled upside-down"

JUMPER(3) = 6
   JTYPE = tripole
   NAME = "I/O ADDR"
   VERTICAL = yes
   LABEL = LOC(6 5 4 3 2 1) "9" "8" "7" "6" "5" "4"
   FACTORY = LOC(6-1) 001111

JUMPER(4) = 8
   JTYPE = tripole
   NAME = "MEM ADDR"
   VERTICAL = yes
   LABEL = LOC(8 7 6 5 4 3 2 1) "EN" "19" "18" "17" "16" "15" "14" "13"
   FACTORY = LOC(8-1) 00011001

SOFTWARE(1) =  "
The CONFIG.sys file must have a driver
added with parameters to setup the IRQ,
DMA Channel and I/O Base Address.  The
format of the entry is :\n
\tDEVICE=NPU9144.sys x y z   \n
The default settings of IRQ 3, I/O
Address 300 and DMA 1 would result in an
entry of DEVICE=NPU9144.sys 3 300 1.\n
The following parameters are:
x=IRQ number, y=I/O Address, and z=DMA
channel number.\n"

FUNCTION = "EtherNet Adapter"
   TYPE = "NET"
   CHOICE = "Ethernet Adapter"
      LINK
         IRQ = 3 | 4 | 5 | 6 | 7 | 2 | 10 | 11 | 12 | 15 | 14
         INIT = JUMPER(1) LOC(10 9 8 7 6 5) 100000 | 010000 | 001000 | 000100 | 000010 | 000001 | 000000 | 000000 | 000000 | 000000 | 000000
         INIT = JUMPER(2) LOC(5 4 3 2 1) 00000 | 00000 | 00000 | 00000 | 00000 | 00000 | 00001 | 00010 | 00100 | 01000 | 10000
         INIT = SOFTWARE(1) "x=3" | "x=4" | "x=5" | "x=6" | "x=7" | "x=2" | "x=10" | "x=11" | "x=12" | "x=15" | "x=14"
      LINK
         DMA = 1 | 3 | 5 | 6 | 7
         INIT = JUMPER(1) LOC(4 3 2 1) 1100 | 0011 | 0000 | 0000 | 0000
         INIT = JUMPER(2) LOC(13 12 11 10 9 8) 000000 | 000000 | 000011 | 001100 | 110000
         INIT = SOFTWARE(1) "z=1" | "z=3" | "z=5" | "z=6" | "z=7"
      LINK
         PORT = 0300h-030fh | 0310h-031fh | 0320h-032fh | 0330h-033fh | 0340h-034fh | 0350h-035fh | 0360h-036fh | 0370h-037fh | 0380h-038fh | 0390h-039fh | 03a0h-03afh | 03b0h-03bfh | 03c0h-03cfh | 03d0h-03dfh | 03e0h-03efh | 03f0h-03ffh | 0200h-020fh | 0210h-021fh | 0220h-022fh | 0230h-023fh | 0240h-024fh | 0250h-025fh | 0260h-026fh | 0270h-027fh | 0280h-028fh | 0290h-029fh | 02a0h-02afh | 02b0h-02bfh | 02c0h-02cfh | 02d0h-02dfh | 02e0h-02efh | 02f0h-02ffh
         INIT = JUMPER(3) LOC(6 5 4 3 2 1) 001111 | 001110 | 001101 | 001100 | 001011 | 001010 | 001001 | 001000 | 000111 | 000110 | 000101 | 000100 | 000011 | 000010 | 000001 | 000000 | 011111 | 011110 | 011101 | 011100 | 011011 | 011010 | 011001 | 011000 | 010111 | 010110 | 010101 | 010100 | 010011 | 010010 | 010001 | 010000
         INIT = SOFTWARE(1) "y=300" | "y=310" | "y=320" | "y=330" | "y=340" | "y=350" | "y=360" | "y=370" | "y=380" | "y=390" | "y=3A0" | "y=3B0" | "y=3C0" | "y=3D0" | "y=3E0" | "y=3F0" | "y=200" | "y=210" | "y=220" | "y=230" | "y=240" | "y=250" | "y=260" | "y=270" | "y=280" | "y=290" | "y=2A0" | "y=2B0" | "y=2C0" | "y=2D0" | "y=2E0" | "y=2F0"

FUNCTION = "Memory Address"
   TYPE = "NET"
   CHOICE = "DISABLE Memory (default)"
      SUBTYPE = "MEM, DIS"
      DISABLE = yes
      FREE
         INIT = JUMPER(4) LOC(8 7 6 5 4 3 2 1) 00011001
   CHOICE = "ENABLE Memory"
      SUBTYPE = "MEM, ENA"
      COMBINE
         MEMORY = 8k
            ADDRESS = 0cc000h | 0ce000h | 0d0000h | 0d2000h | 0d4000h | 0d6000h | 0d8000h | 0da000h | 0dc000h | 0de000h | 0e0000h | 0e2000h | 0e4000h | 0e6000h | 0e8000h | 0ea000h | 0ec000h | 0ee000h | 0c8000h | 0ca000h
            MEMTYPE = oth
            SIZE = byte
            CACHE = no
         INIT = JUMPER(4) LOC(8 7 6 5 4 3 2 1) 10011001 | 10011000 | 10010111 | 10010110 | 10010101 | 10010100 | 10010011 | 10010010 | 10010001 | 10010000 | 10001111 | 10001110 | 10001101 | 10001100 | 10001011 | 10001010 | 10001001 | 10001000 | 10011011 | 10011010