;
; Board Identification Block for EISA 100 Mb/s Network/MSL Adapter Card
;

BOARD
  ID       = "PTS002A"
  NAME     = "EISA 100 Mb/s Network/MSL Adapter Card"
  CATEGORY = "NET"
  MFR      = "OEM"
  SLOT     = EISA
  LENGTH   = 200
  AMPERAGE = 1800
  SKIRT    = NO
  READID   = YES
  IOCHECK  = INVALID
  DISABLE  = SUPPORTED
  COMMENTS = "EISA 100 Mb/s Network/MSL Adapter Card.
              100 Mbs Optical Fiber Interface for Network
              or SFT III applications."
  
  HELP     = "EISA 100 Mb/s Network/MSL Adapter Card
              requires 32K contiguous bytes of memory and can be
              mapped anywhere within the 32 bit memory map on 32K
              boundaries. It drives level sensitive interrupts only
              which are software selectable from INT3, INT4, INT5,
              INT7, INT9, INT10, INT11, INT12 and INT15. It does not
              require the assignment of a DMA channel."

;
; Initialization Information Block for EISA Adapter Card is not
; required as this will be done by the device driver. A BIOS call to
; interrogate the Non-Volitile memory will be required to find out where
; the configuration utility has assigned the EISA Adapter Cards memory
; and which interrupt to use.
;
; Function Statement Blocks for EISA Adapter Card. Used to inform
; configuration utility of memory and interrupt requirements and options.

  FUNCTION         = "EISA 100 Mb/s Network/MSL Adapter Card 32K window BASE"
    COMMENTS       = "EISA 100 Mb/s Network/MSL Adapter Card Requires a 32K 
                      window anywhere within the 32-bit addressing capability 
                      of the host, on a 32K boundary."

    HELP           = "The EISA 100 Mb/s Network/MSL Adapter Card occupies 32K 
                      of contiguous MEMORY address space. For DOS machines, 
                      this must be allocated within the first megabyte of 
                      memory. For non-DOS machines, it can be configured 
                      anywhere within the 32 bit address capability of the 
                      host machine."

      CHOICE       = "Use any available 32K block within the first MEG."
        FREE
        MEMORY     = 32K
        ADDRESS    = 0C8000h - 0E8000h STEP = 32K
          WRITABLE = YES
          MEMTYPE  = OTH
          SIZE     = DWORD
          DECODE   = 32
          CACHE    = NO
          SHARE    = NO


      CHOICE       = "Select Base Address C8000H"
        FREE
        MEMORY     = 32K
        ADDRESS    = 0C8000H
          WRITABLE = YES
          MEMTYPE  = OTH
          SIZE     = DWORD
          DECODE   = 32
          CACHE    = NO
          SHARE    = NO

      CHOICE       = "Select Base Address D0000H"
        FREE
        MEMORY     = 32K
        ADDRESS    = 0D0000H
          WRITABLE = YES
          MEMTYPE  = OTH
          SIZE     = DWORD
          DECODE   = 32
          CACHE    = NO
          SHARE    = NO

      CHOICE       = "Select Base Address D8000H"
        FREE
        MEMORY     = 32K
        ADDRESS    = 0D8000H
          WRITABLE = YES
          MEMTYPE  = OTH
          SIZE     = DWORD
          DECODE   = 32
          CACHE    = NO
          SHARE    = NO
      
      CHOICE       = "Select Base Address E0000H"
        FREE
        MEMORY     = 32K
        ADDRESS    = 0E0000H
          WRITABLE = YES
          MEMTYPE  = OTH
          SIZE     = DWORD
          DECODE   = 32
          CACHE    = NO
          SHARE    = NO
      
      CHOICE       = "Select Base Address E8000H"
        FREE
        MEMORY     = 32K
        ADDRESS    = 0E8000H
          WRITABLE = YES
          MEMTYPE  = OTH
          SIZE     = DWORD
          DECODE   = 32
          CACHE    = NO
          SHARE    = NO

      CHOICE       = "Use any available 32K block."
        FREE
        MEMORY     = 32K
        ADDRESS    = 800K - 1048576K STEP = 32K
          WRITABLE = YES
          MEMTYPE  = OTH
          SIZE     = DWORD
          DECODE   = 32
          CACHE    = NO
          SHARE    = NO

  FUNCTION         = "EISA 100 Mb/s Network/MSL Adapter Card Interrupt Select"
    COMMENTS       = "EISA 100 Mb/s Network/MSL Adapter Card Card can use ONE 
                      of the following interrupt lines : 3, 4, 5, 7, 9, 10, 11, 
                      12, or 15. The selected interrupt is level sensitive and
                      sharable."
    
    HELP           = "EISA 100 Mb/s Network/MSL Adapter Card Card can use ONE 
                      of the following interrupt lines : 3, 4, 5, 7, 9, 10, 11, 
                      12, or 15. The selected interrupt is level sensitive and
                      sharable."

      CHOICE       = "Let configuration utility select the interrupt."
        FREE
        IRQ        = 3 | 4 | 5 | 7 | 9 | 10 | 11 | 12 | 15
          SHARE    = NO
          TRIGGER  = LEVEL

      CHOICE       = "Select Interrupt 3"
        FREE
        IRQ        = 3 
        SHARE      = NO
        TRIGGER    = LEVEL
      
      CHOICE       = "Select Interrupt 4"
        FREE
        IRQ        = 4 
        SHARE      = NO
        TRIGGER    = LEVEL

      CHOICE       = "Select Interrupt 5"
        FREE
        IRQ        = 5 
        SHARE      = NO
        TRIGGER    = LEVEL

      CHOICE       = "Select Interrupt 7"
        FREE
        IRQ        = 7 
        SHARE      = NO
        TRIGGER    = LEVEL

      CHOICE       = "Select Interrupt 9"
        FREE
        IRQ        = 9
        SHARE      = NO
        TRIGGER    = LEVEL

      CHOICE       = "Select Interrupt 10"
        FREE
        IRQ        = 10
        SHARE      = NO
        TRIGGER    = LEVEL

      CHOICE       = "Select Interrupt 11"
        FREE
        IRQ        = 11
        SHARE      = NO
        TRIGGER    = LEVEL

      CHOICE       = "Select Interrupt 12"
        FREE
        IRQ        = 12
        SHARE      = NO
        TRIGGER    = LEVEL
      
      CHOICE       = "Select Interrupt 15"
        FREE
        IRQ        = 15 
        SHARE      = NO
        TRIGGER    = LEVEL