BOARD
  ID = "RAC0891"
  NAME = "Racore Token-Ring (16/4 Mbps, 32 bit EISA bus)"
  MFR = "Racore Computer Products, Inc."
  CATEGORY = "NET"
  SLOT = EISA
  READID = YES
  BUSMASTER = 100 
  COMMENTS = "\nThis is the Racore 32 bit EISA 16/4Mbps Token Ring
              \nnetwork adapter for EISA bus compatible computers."

IOPORT(1) = 0ZC80h
  SIZE = BYTE

IOPORT(2) = 0ZC81h
  SIZE = BYTE

IOPORT(3) = 0ZC82h
  SIZE = BYTE

IOPORT(4) = 0ZC83h
  SIZE = BYTE

IOPORT(5) = 0ZC84h
  SIZE = BYTE
  INITVAL = 00000001b

IOPORT(6) = 0ZC85h
  SIZE = BYTE
  INITVAL = xxxxxxxxb

IOPORT(7) = 0ZC86h
  SIZE = BYTE
  INITVAL = xx0xx1x1b

GROUP = "Racore 16/4 Token Ring EISA NIC"
  TYPE = "NET,TOK"

  FUNCTION = "I/O Address Location"
    TYPE = "I/O"
    COMMENTS = "\nRacore supports up to four I/O address selections.
                \nThe default I/O address is 0A20h - 0A3Fh."

    CHOICE = "0A20h - 0A3Fh"
      LINK
        PORT = 0A20h-0A3Fh
          SHARE = NO
          SIZE = BYTE
        INIT = IOPORT(6) LOC(1 0) 01
    CHOICE = "0A00h - 0A1Fh"
      LINK
        PORT = 0A00h-0A1Fh
          SHARE = NO
          SIZE = BYTE
        INIT = IOPORT(6) LOC(1 0) 00
    CHOICE = "0A40h - 0A5Fh"
      LINK
        PORT = 0A40h-0A5Fh
          SHARE = NO
          SIZE = BYTE
        INIT = IOPORT(6) LOC(1 0) 10
    CHOICE = "0A60h - 0A7Fh"
      LINK
        PORT = 0A60h-0A7Fh
          SHARE = NO
          SIZE = BYTE
        INIT = IOPORT(6) LOC(1 0) 11

  FUNCTION = "Interrupt (IRQ) Level"
    TYPE = "INT"
    COMMENTS = "\nRacore supports up to four IRQ level selections.
                \nThe default IRQ level is IRQ 2 (9)."

    CHOICE = "Interrupt 2 (9)"
    SUBTYPE = "9"
      LINK
        IRQ = 9
          SHARE = NO
          TRIGGER = EDGE
        INIT = IOPORT(6) LOC(3 2) 01
    CHOICE = "Interrupt 3"
    SUBTYPE = "3"
      LINK
        IRQ = 3
          SHARE = NO
          TRIGGER = EDGE
        INIT = IOPORT(6) LOC(3 2) 00
    CHOICE = "Interrupt 10"
    SUBTYPE = "10"
      LINK
        IRQ = 10
          SHARE = NO
          TRIGGER = EDGE
        INIT = IOPORT(6) LOC(3 2) 10
    CHOICE = "Interrupt 11"
    SUBTYPE = "11"
      LINK
        IRQ = 11
          SHARE = NO
          TRIGGER = EDGE
        INIT = IOPORT(6) LOC(3 2) 11

  FUNCTION = "Memory (ROM) Address Location"
    TYPE = "ROM"
    COMMENTS = "\nRacore support up to four ROM address locations.
                \nThe default location is CC000-CDFFF."

    CHOICE = "CC000-CDFFF"
      LINK
        MEMORY = 8K
          ADDRESS = 0CC000h
          WRITABLE = NO
          SIZE = BYTE
        INIT = IOPORT(6) LOC(5 4) 00
    CHOICE = "D0000-D1FFF"
      LINK
        MEMORY = 8K
          ADDRESS = 0D0000h
          WRITABLE = NO
          SIZE = BYTE
        INIT = IOPORT(6) LOC(5 4) 01
    CHOICE = "D8000-D9FFF"
      LINK
        MEMORY = 8K
          ADDRESS = 0D8000h
          WRITABLE = NO
          SIZE = BYTE
        INIT = IOPORT(6) LOC(5 4) 10
    CHOICE = "DC000-DDFFF"
      LINK
        MEMORY = 8K
          ADDRESS = 0DC000h
          WRITABLE = NO
          SIZE = BYTE
        INIT = IOPORT(6) LOC(5 4) 11

  FUNCTION = "Adapter Data Rate (Ring Speed)"
    TYPE = "SPD"
    COMMENTS = "\nRacore offers both 4Mbps and 16Mbps Ring Speed.
                \nYou must set the speed to the same rate as the 
                \nLAN segment to which you are connecting."

    CHOICE = "16 Mbps"
    SUBTYPE = "16"
      FREE
        INIT = IOPORT(7) LOC(1) 0
    CHOICE = "4 Mbps"
    SUBTYPE = "4"
      FREE
        INIT = IOPORT(7) LOC(1) 1

  FUNCTION = "Type 1 OR Type 3/Fiber Optic Media Selection"
    COMMENTS = "\nRacore provides on-board connections to either Type 1
                \n(STP) or Type 3 (UTP)/Fiber Optic cable. You must select
		\nthe appropriate cable to enabling the proper connector."

    CHOICE = "TYPE 1 (STP)"
      FREE
        INIT = IOPORT(7) LOC(3) 0
    CHOICE = "TYPE 3 (UTP)/Fiber Optic"
      FREE
        INIT = IOPORT(7) LOC(3) 1

  FUNCTION = "ROM Space Enabled/Disabled"
    COMMENTS = "\nThis switch allocates ROM space for the Flash ROM  device.
                \nThis switch will normally be enabled.  If this switch is
		\ndisabled, you must provide a node address to the device
		\ndriver and have the .COD file available for the driver to
		\naccess."

    CHOICE = "ROM Enabled"
      FREE
        INIT = IOPORT(7) LOC(4) 1

    CHOICE = "ROM Disabled"
      FREE
        INIT = IOPORT(7) LOC(4) 0

    FUNCTION = "Adapter Processor Clock Speed"
    COMMENTS = "\nAllows the selection of either the 16 MHz on board clock 
                \nor the 8 MHz Bus Clock for the Adapter Processor to run at."

    CHOICE = "16 MHz ON BOARD CLOCK"
      FREE
        INIT = IOPORT(7) LOC(7) 0

    CHOICE = "8 MHz BCLK"
      FREE
        INIT = IOPORT(7) LOC(7) 1

ENDGROUP