BOARD
   ID = "SEC0021"
   NAME = "WD 90C31 Local Bus VGA"
   MFR = "SAMSUNG Electronics Co., Ltd."
   CATEGORY = "MSD"
   LENGTH = 340
   BUSMASTER = 50
   AMPERAGE = 1200

JUMPER(2) = 1
        JTYPE = paired
        NAME = "M16 select"
        VERTICAL = yes
        REVERSE = no
        LABEL = LOC(1) "JP2"
        INITVAL = LOC(1) 1
        COMMENTS = "
            1-2 for M16 (Default)\n
           OPEN for not M16"

JUMPER(3) = 1
        JTYPE = tripole
        NAME = "Local VGA Select"
        VERTICAL = yes
        REVERSE = no
        LABEL = LOC(1) "JP3"
        INITVAL = LOC(1) 0
        COMMENTS = "
            1-2 for VGA\n
            2-3 for Local VGA (Default)"

JUMPER(5) = 1
        JTYPE = tripole
        NAME = "Local VGA Select"
        VERTICAL = yes
        REVERSE = no
        LABEL = LOC(1) "JP5"
        INITVAL = LOC(1) 0
        COMMENTS = "
            1-2 for VGA\n
            2-3 for Local VGA (Default)"

JUMPER(6) = 1
        JTYPE = paired
        NAME = "IRQ select"
        VERTICAL = yes
        REVERSE = no
        LABEL = LOC(1) "JP6"
        INITVAL = LOC(1) 1
        COMMENTS = "
            1-2 for Enable IRQ9 (Default)\n
           OPEN for Disable IRQ9"

JUMPER(7) = 1
        JTYPE = tripole
        NAME = "Local VGA Select"
        VERTICAL = yes
        REVERSE = no
        LABEL = LOC(1) "JP7"
        INITVAL = LOC(1) 1
        COMMENTS = "
            1-2 for Local VGA (Default)\n
            2-3 for VGA"


JUMPER(8) = 1
        JTYPE = paired
        NAME = "Dual Monitor select"
        VERTICAL = yes
        REVERSE = no
        LABEL = LOC(1) "JP8"
        INITVAL = LOC(1) 1
        COMMENTS = "
            1-2 for dual monitor (Default)\n
           OPEN for normal"

JUMPER(9) = 1
        JTYPE = paired
        NAME = "Local VGA Select"
        VERTICAL = yes
        REVERSE = no
        LABEL = LOC(1) "JP9"
        INITVAL = LOC(1) 0
        COMMENTS = "
            1-2 for VGA\n
           OPEN for Local VGA (Default)"

GROUP = "Host Adapter System Resources"
        TYPE = "MSD"
FUNCTION = "BIOS Base Address"
        CHOICE = "Base Address E0000"
                COMBINE
                MEMORY=32K
                ADDRESS=0E0000H
                WRITABLE=NO
                MEMTYPE = OTH
                SHARE=NO
                SIZE=BYTE
                CACHE=YES
                DECODE=24

FUNCTION = "Interrupt Channel"
           CHOICE = "IRQ 9"
                 LINK
                 IRQ = 9
                 TRIGGER = EDGE
                 SHARE = NO

ENDGROUP