;
; Star Gate Technologies Inc. - Avanstar 200I with 256k of Dual Ported
;				memory which is windowed through a
;				16k address space in the host computer.

BOARD
	ID="SGT2001"
	NAME="Avanstar 200I - Intelligent Serial Card w/256k RAM"
	MFR="Star Gate"
	CATEGORY="COM"
	SLOT=ISA16
	LENGTH=330
	SKIRT=NO
	READID=NO
	COMMENTS="Star Gate Avanstar 200I with 256k dual port RAM."

SWITCH(1)=4
	NAME="SW1"
	STYPE=DIP
	VERTICAL=NO
	REVERSE=YES
	FACTORY=LOC(1-4)1111
	COMMENTS="This switch is located at the top edge of the card
 close to the metal bracket.  Positions 1 through 3 are used to set the
 cards I/O base address. Position 4 is not used and is always in the closed
 position."
	
FUNCTION="IRQ Level"
	TYPE="COM,ASY"
	COMMENTS=" The Avanstar 200I can be configured to use IRQs 3,4,5,9,10,11,12,15"

	CHOICE="IRQ 3"
		LINK
		IRQ=3
		SHARE=YES

	CHOICE="IRQ 4"
		LINK
		IRQ=4
		SHARE=YES

	CHOICE="IRQ 5"
		LINK
		IRQ=5
		SHARE=YES

	CHOICE="IRQ 9"
		LINK
		IRQ=9
		SHARE=YES

	CHOICE="IRQ 10"
		LINK
		IRQ=10
		SHARE=YES

	CHOICE="IRQ 11"
		LINK
		IRQ=11
		SHARE=YES

	CHOICE="IRQ 12"
		LINK
		IRQ=12
		SHARE=YES

	CHOICE="IRQ 15"
		LINK
		IRQ=15
		SHARE=YES

	CHOICE="Disable IRQ"
		DISABLE = YES

FUNCTION="I/O Base Address"
	CHOICE="200H"
		LINK
		PORT=0200h
		SHARE=NO
		SIZE=BYTE
		INIT=SWITCH(1) LOC(1 2 3 4) 1111

	CHOICE="208H"
		LINK
		PORT=0208h
		SHARE=NO
		SIZE=BYTE
		INIT=SWITCH(1) LOC(1 2 3 4) 0111

	CHOICE="300H"
		LINK
		PORT=0300h
		SHARE=NO
		SIZE=BYTE
		INIT=SWITCH(1) LOC(1 2 3 4) 1011

	CHOICE="308H"
		LINK
		PORT=0308h
		SHARE=NO
		SIZE=BYTE
		INIT=SWITCH(1) LOC(1 2 3 4) 0011

	CHOICE="600H"
		LINK
		PORT=0600h
		SHARE=NO
		SIZE=BYTE
		INIT=SWITCH(1) LOC(1 2 3 4) 1101

	CHOICE="608H"
		LINK
		PORT=0608h
		SHARE=NO
		SIZE=BYTE
		INIT=SWITCH(1) LOC(1 2 3 4) 0101

	CHOICE="700H"
		LINK
		PORT=0700h
		SHARE=NO
		SIZE=BYTE
		INIT=SWITCH(1) LOC(1 2 3 4) 1001

	CHOICE="708H"
		LINK
		PORT=0708h
		SHARE=NO
		SIZE=BYTE
		INIT=SWITCH(1) LOC(1 2 3 4) 0001


FUNCTION="Dual Port RAM Address"
COMMENTS = "Select 'Change Resources' from the Edit pull-down
 menu to change the selections for this function.
\nSelect 'View Resources' to verify the selected addresses and IRQ
 lines.\n"
	CHOICE="Dual Port Base Address"
		LINK
		MEMORY=16K
		ADDRESS=0A0000h-0FF000h STEP=16K
		WRITABLE=YES
		MEMTYPE=OTHER
		SHARE=YES