BOARD		 
 ID="SNIabf0"
 NAME="ETHER-BOARD-AT105T Ethernet/Cheapernet Adapter"
 MFR="Microdyne"
 CATEGORY="NET"
 SLOT=ISA16
 LENGTH=158
 AMPERAGE=1229
 COMMENTS="
 \nUse one of the three methods for configuration.
 \nTo select Connector Type and the Wait State Option, use method 3.
 \n1. Select \"Netware Basic Configuration\" for one of eight configuration 
  options available. Four without Remote Boot EPROM and four with Remote Boot 
  EPROM. 
 \n2. Select \"Other Options\".	
 \n3. Select each individual option from the available options listed." 
 HELP="
 Use the V)iew D)etail by Slot mode to see Configuration Options 
 by Network Software Type. Use E)dit Change F)unction to select Options."

;=========================================================================

JUMPER(1)=4
 JTYPE=paired
 NAME="IRQ"
 LABEL=LOC(4-1) "W20" "W21" "W22" "W25"
 FACTORY=LOC(4-1) 0010

JUMPER(2)=3
 JTYPE=paired
 NAME="Base I/O Addr"
 LABEL=LOC(3-1) "W1" "W2" "W3"
 FACTORY=LOC(3-1) 101

JUMPER(3)=6
 JTYPE=tripole
 NAME="Network Type JumperI"
 LABEL=LOC(6-1) "W6" "W7" "W8" "W9" "W10" "W11" 
 FACTORY=LOC(6-1) 000000
 COMMENTS="
The following jumper are also necessary for the Network Type"

JUMPER(4)=2
 NAME="Network Type JumperII"
 JTYPE=tripole
 REVERSE=yes
 VERTICAL=YES
 LABEL=LOC(1-2) "W5" "W13"
 FACTORY=LOC(1-2) 11 

JUMPER(5)=8
 JTYPE=paired
 NAME="DMA"
 LABEL=LOC(8-1) "W14" "W15" "W16" "W17" "W18" "W19" "W23" "W24"  
 FACTORY=LOC(8-1) 00001100 
 COMMENTS="
Always two jumper (DRQ, DACK)" 

JUMPER(6)=1
 JTYPE=paired
 NAME="Wait State Option"
 LABEL=LOC(1) "W4"
 FACTORY=LOC(1) 1 

JUMPER(7)=1
 NAME="Signal Quality Error"
 JTYPE=tripole
 REVERSE=yes
 VERTICAL=yes
 LABEL=LOC(1) "W12"
 FACTORY=LOC(1) 1

;=========================================================================

SOFTWARE(2)="Your connection type is: "
SOFTWARE(3)="You have selected:  "
SOFTWARE(4)="Your individually selected IRQ is: "
SOFTWARE(5)="Your individually selected DMA is: "
SOFTWARE(6)="Your individually selected I/O and EPROM Address is: "

;=========================================================================

FUNCTION="EXOS105T"
 TYPE="NET"
 HELP="
 Use E)dit Change F)unction to Select Options.
 \n\nOnly one Network Function Should be in effect."

;================================================

SUBFUNCTION="Connector Type"
 TYPE="NET"
 CONNECTION="Cheapernet uses BNC, Ethernet uses 15 pin DIX"
CHOICE="Cheapernet (BNC) Connection"
 AMPERAGE=1961
 FREE
 INIT=JUMPER(3) LOC(6-1) 000000
 INIT=JUMPER(4) LOC(1-2) 11
 INIT=SOFTWARE(2) "Cheapernet"
CHOICE="Ethernet (DIX) Connection"
 FREE
 INIT=JUMPER(3) LOC(6-1) 111111
 INIT=JUMPER(4) LOC(2-1) 00
 INIT=SOFTWARE(2) "Ethernet"

;================================================

SUBFUNCTION="Added Wait State Option"
 TYPE="NET"
CHOICE="No Added Wait State"
 FREE
 INIT=JUMPER(6) LOC(1) 1
 INIT=SOFTWARE(3) "No Added Wait State"
CHOICE="One Added Wait State"
 FREE
 INIT=JUMPER(6) LOC(1) 0
 INIT=SOFTWARE(3) "One Added Wait State"

;================================================

SUBFUNCTION="IRQ Options"
 TYPE="NET"
CHOICE="Not Selected"
CHOICE="IRQ 3"
 FREE
 IRQ=3
 INIT=JUMPER(1) LOC(4-1) 1000
 INIT=SOFTWARE(4) "IRQ 3"
CHOICE="IRQ 4"
 FREE
 IRQ=4
 INIT=JUMPER(1) LOC(4-1) 0100
 INIT=SOFTWARE(4) "IRQ 4"
CHOICE="IRQ 5"
 FREE
 IRQ=5
 INIT=JUMPER(1) LOC(4-1) 0010
 INIT=SOFTWARE(4) "IRQ 5"
CHOICE="IRQ 9"
 FREE
 IRQ=9
 INIT=JUMPER(1) LOC(4-1) 0001
 INIT=SOFTWARE(4) "IRQ 9"

;================================================

SUBFUNCTION="DMA Options"
 TYPE="NET"
CHOICE="Not Selected"
CHOICE="DMA 5"
 FREE
 DMA=5
 SIZE=WORD
 TIMING=DEFAULT
 INIT=JUMPER(5) LOC(8-1) 00001100
 INIT=SOFTWARE(5) "DMA 5"
CHOICE="DMA 6"
 FREE
 DMA=6
 SIZE=WORD
 TIMING=DEFAULT
 INIT=JUMPER(5) LOC(8-1) 00110000
 INIT=SOFTWARE(5) "DMA 6"
CHOICE="DMA 7"
 FREE
 DMA=7
 SIZE=WORD
 TIMING=DEFAULT
 INIT=JUMPER(5) LOC(8-1) 11000000
 INIT=SOFTWARE(5) "DMA 7"
CHOICE="DMA 3"
 FREE
 DMA=3
 SIZE=WORD
 TIMING=DEFAULT
 INIT=JUMPER(5) LOC(8-1) 00000011
 INIT=SOFTWARE(5) "DMA 3"

;================================================

SUBFUNCTION="I/O & Memory Options"
 TYPE="NET"
CHOICE="Not Selected"
CHOICE="I/O 300h & No EPROM"
 FREE
 PORT=0300h-0317h
 INIT=JUMPER(2) LOC(3-1) 101
 INIT=SOFTWARE(6) "I/O 300h & No EPROM"
CHOICE="I/O 320h & No EPROM"
 FREE
 PORT=0320h-0337h
 INIT=JUMPER(2) LOC(3-1) 100
 INIT=SOFTWARE(6) "I/O 320h & No EPROM"
CHOICE="I/O 340h & No EPROM"
 FREE
 PORT=0340h-0357h
 INIT=JUMPER(2) LOC(3-1) 001
 INIT=SOFTWARE(6) "I/O 340h & No EPROM"
CHOICE="I/O 360h & No EPROM"
 FREE
 PORT=0360h-0377h
 INIT=JUMPER(2) LOC(3-1) 000
 INIT=SOFTWARE(6) "I/O 360h & No EPROM"
CHOICE="I/O 300h & C800h"
 FREE
 PORT=0300h-0317h
 INIT=JUMPER(2) LOC(3-1) 111
 MEMORY=16K
 ADDRESS=0C8000h
 MEMTYPE=OTHER
 INIT=JUMPER(2) LOC(3-1) 111
 INIT=SOFTWARE(6) "I/O 300h & C800h"
CHOICE="I/O 320h & CC00h"
 AMPERAGE = 22
 FREE
 PORT=0320h-0337h
 INIT=JUMPER(2) LOC(3-1) 110
 MEMORY=16K
 ADDRESS=0CC000h
 MEMTYPE=OTHER
 INIT=JUMPER(2) LOC(3-1) 110
 INIT=SOFTWARE(6) "I/O 320h & CC00h"
CHOICE="I/O 340h & D000h"
 AMPERAGE = 22
 FREE
 PORT=0340h-0357h
 INIT=JUMPER(2) LOC(3-1) 011
 MEMORY=16K
 ADDRESS=0D0000h
 MEMTYPE=OTHER
 INIT=JUMPER(2) LOC(3-1) 011
 INIT=SOFTWARE(6) "I/O 340h & D000h"
CHOICE="I/O 360h & D400h"
 AMPERAGE = 22
 FREE
 PORT=0360h-0377h
 INIT=JUMPER(2) LOC(3-1) 010
 MEMORY=16K
 ADDRESS=0D4000h
 MEMTYPE=OTHER
 INIT=JUMPER(2) LOC(3-1) 010
 INIT=SOFTWARE(6) "I/O 360h & D400h"

;================================================

SUBFUNCTION="Signal Quality Error"
TYPE="NET"
CHOICE="Enabled"
 LINK
 INIT=JUMPER(7) LOC(1) 1
CHOICE="Disabled"
 LINK
 INIT=JUMPER(7) LOC(1) 0
CHOICE="Not Selected"