; Copyright (c) TCC 1991.  All rights reserved. 
; No part may be reproduced, transmitted, transcribed, stored in retrieval
; system, or translated into any language or computer language, in any form
; or by any means, electronic, mechanical, magnetic, optical, manual,
; or otherwise, without prior written permission of TCC.
;
; Configuration file for the ARC RLL Controller.
; @[#]TCC0100      1.70                            91/10/22

;=== Maintenance History =====================================================
;
;Rev   Date     Name Comment
;----  --------  --  ----------------------------------------------
;1.70  22.10.91  DM  Removed non-English help instructions
;1.60  30.09.91  TF  Text edits for release.
;1.50  05.06.91  DM  Needed CR at end of file for syntax bug
;1.40  21.05.90  DM  Added what string support
;1.30  04.05.90  DM  Changed wording, linkfrees, default choices
;1.20  15.03.90  DM  Re-structured choices, removed sec. floppy
;1.10  25.01.90  DM  Added jumper settings
;1.00  01.01.90  DM  Initial release
;
BOARD
  ID = "TCC0100"
  NAME = "ARC RLL Controller"
  MFR = "TCC"
  CATEGORY = "MSD"
  SLOT = ISA16
  LENGTH = 330
  SKIRT = NO
  READID = NO

;Jumper descriptions start here

JUMPER (1) = 1
  NAME = "JP1 Hard Disk LED"
  JTYPE = PAIRED
  VERTICAL = YES
  REVERSE = NO
  FACTORY = LOC(1) 0

JUMPER (2) = 2
  NAME = "JP2 Coresidency"
  JTYPE = INLINE
  VERTICAL = NO
  REVERSE = NO
  COMMENTS = "This jumper is for factory use only and should not be 
  enabled."
  LABEL = LOC(1-3) "1" "2" "3"
  FACTORY = LOC(1^2) 0

JUMPER (3) = 2
  NAME = "JP3 Floppy Select"
  JTYPE = INLINE
  VERTICAL = YES
  REVERSE = NO
  COMMENTS = "This jumper may not be present on all boards."
  LABEL = LOC(1-3) "Secondary" "" "Primary"
  FACTORY = LOC(2^1) 1

JUMPER (4) = 4
  NAME = "JP4 IRQ Select"
  JTYPE = PAIRED
  VERTICAL = YES
  REVERSE = YES
  LABEL = LOC(4-1) "IRQ 14" "IRQ 12" "IRQ 11" "IRQ 10"
  FACTORY = LOC(4) 1

JUMPER (5) = 4
  NAME = "JP5 ARCBIOS Address"
  JTYPE = PAIRED
  VERTICAL = YES
  REVERSE = YES
  COMMENTS = "Remove jumper to disable ARCBIOS."
  LABEL = LOC(4-1) "D800" "D000" "C800" "C000"
  FACTORY = LOC(2) 1

;Function descriptions start here

FUNCTION = "ARC RLL Controller"
  TYPE="MSD"

  SUBFUNCTION = "IRQ Level"
    TYPE = "MSD,HDCTL"
    CHOICE = "Not IRQ Selectable"
      FREE
        IRQ = 14
          SHARE = YES
          TRIGGER = EDGE
          INIT = JUMPER(4) LOC(1-4) 0001
      FREE
        PORT = 580h - 58Fh
          SHARE = NO
    CHOICE = "IRQ Selectable"
      LINK
        IRQ = 14 | 10 | 11 | 12
          SHARE = NO
          TRIGGER = EDGE
          INIT = JUMPER(4) LOC(1-4) 0001 | 1000 | 0100 | 0010
      FREE
        PORT = 580h - 58Fh
          SHARE = NO

  SUBFUNCTION = "ARC BIOS"
    TYPE = "MSD,HDCTL"
    CHOICE = "Enabled"
      LINK
        MEMORY = 16K | 16K | 16K | 16K
          ADDRESS = 0C8000h | 0C0000h | 0D0000h | 0D8000h
          WRITABLE = NO
          MEMTYPE = SYS
          CACHE = YES
          SHARE = NO
          INIT = JUMPER(5) LOC(1-4) 0100 | 1000 | 0010 | 0001
    CHOICE = "Disabled"
      FREE
        INIT = JUMPER(5) LOC(1-4) 0000

FUNCTION = "ARC Floppy Controller"
 TYPE="MSD,FLPYCTL"
 CHOICE = "Disabled or Not Present"
   FREE
     INIT = JUMPER(3) LOC(1^2 2^3) 00
 CHOICE = "Primary"
   FREE
     IRQ = 6
       TRIGGER = EDGE
       SHARE = NO
     DMA = 2
       SHARE = NO
     PORT = 3F0h-3F7h
     INIT = JUMPER(3) LOC(2^3) 1