; Copyright (c) TCC 1991.  All rights reserved. 
; No part may be reproduced, transmitted, transcribed, stored in retrieval
; system, or translated into any language or computer language, in any form
; or by any means, electronic, mechanical, magnetic, optical, manual,
; or otherwise, without prior written permission of TCC.
;
; Configuration file for the Dual Video adapter
; @[#]TCC0240      1.10                            91/09/30

; === Maintenance History =====================================================
;
;Rev   Date     Name Comment
;----  --------  --  ----------------------------------------------
;1.10  30.09.91  TF  Text edits for release.
;1.00  13.02.91  DM  Initial release
;
BOARD
  ID = "TCC0240"
  NAME = "Dual Video Adapter"
  MFR = "TCC"
  CATEGORY = "VID"
  SLOT = ISA8OR16
  SKIRT = NO
  LENGTH = 180

  SWITCH(1) = 4
    NAME = "S1"
    STYPE = DIP
    VERTICAL = YES
    REVERSE = NO
    FACTORY = LOC(4-1) 0000
    LABEL = LOC(4-1) "Scroll" "Speed" "MonType" "VidMode" 
    COMMENTS = "Switches 2-4 are only active in Color Graphics mode."

  FUNCTION = "Dual Video Configuration"

    SUBFUNCTION = "Video Mode"

      CONNECTION = "The digital monitor must be connected to the 9-pin
      DSUB connector, labelled P1, on the rear bracket.  Be sure that
      you have set the correct video mode and switch positions for your
      monitor type.\n\nA composite video monitor may be connected to
      the female RCA-type connector, labelled J1, on the rear bracket. 
      You may use either video mode for a composite monitor.\n\nA light
      pen may be connected to the 5-pin inline jumper labelled P3."

      CHOICE = "Monochrome Text"
        LINK
          PORT = 3B0H-3BFH
        LINK
          MEMORY = 4K
          ADDRESS = 0B0000H
          MEMTYPE = OTH
        LINK
          INIT = SWITCH(1) LOC(1) 1

      CHOICE = "Color Graphics/Text"
        LINK
          PORT = 3D0H-3DFH
        LINK
          MEMORY = 32K
          ADDRESS = 0B8000H
          MEMTYPE = OTH
        LINK
          INIT = SWITCH(1) LOC(1) 0
  
    SUBFUNCTION = "Monitor Type"
      CHOICE = "Monochrome Monitor"
        FREE
          INIT = SWITCH(1) LOC(2) 1
      CHOICE = "Color Graphics Monitor"
        FREE
          INIT = SWITCH(1) LOC(2) 0

    SUBFUNCTION = "Throughput Speed"
      CHOICE = "Normal Access"
        FREE
          INIT = SWITCH(1) LOC(3) 1
      CHOICE = "High Speed Access"
        FREE
          INIT = SWITCH(1) LOC(3) 0

    SUBFUNCTION = "Scroll Flicker"
      CHOICE = "Eliminated"
        FREE
          INIT = SWITCH(1) LOC(4) 0
      CHOICE = "Normal"
        FREE
          INIT = SWITCH(1) LOC(4) 1