;	Technology Concepts Ltd
;	Grange Estate
;	Cwmbran
;	Gwent
;	NP44 3XR
;	Tel: +44 (0)633 872611
;	Fax: +44 (0)633 872329
;
;	EISA PCC/16i
;	CFG Version 1.0d
;	02.10.92

BOARD
  ID ="TCL0102"			;Product ID
  NAME = "Technology Concepts  PCC/16i 16 Port Adapter (EISA)"
  MFR = "Technology Concepts Ltd"
  CATEGORY = "COM"
  SLOT = EISA
  LENGTH = 330
  AMPERAGE = 1500
  SKIRT = NO
  READID = YES
  IOCHECK = VALID
  DISABLE = SUPPORTED
  COMMENTS = "The PCC/16i intelligent I/O controller
  	      provides 16 asynchronous serial ports"
  HELP = "The PCC/16i supports full automatic
  	  configuration. It occupies 8Kbytes of
	  memory, the base address of which can
	  be set on any 8Kbyte bounndary.  The card
	  supports the following IRQs :
	  3, 5, 7, 9, 10, 11, 12, 15."

IOPORT(1) = 0zc85h
  SIZE = BYTE

IOPORT(2) = 0zc86h
  SIZE = BYTE

IOPORT(3) = 0zc87h
  SIZE = BYTE

IOPORT(4) = 0zc88h	
  SIZE = BYTE


FUNCTION = "Base Address"
  COMMENTS = "The PCC/16i card occupies 8Kbytes of 
  	      memory between 640K and 1M. Use the 'Change
	      Resource' option to set the required level."
  CHOICE = "Any 8k boundary between 640k and 1M"
  FREE
  	    MEMORY = 8K
	    ADDRESS = 0A0000h - 0EE000h STEP = 8k
	    WRITABLE = YES
	    MEMTYPE = OTH
	    SIZE = WORD
	    CACHE = NO
	    SHARE = NO
	    INIT = IOPORT(1) 01010000-01110111


FUNCTION = "Interrupt Level"
  COMMENTS = "The PCC/16i card can be configured to one of
  	      eight interrupt levels.  Use the 'Change 
	      Resource' option to set the required level."
  CHOICE = "Choice of : 3, 5, 7, 9, 10, 11, 12, 15"
  FREE
  	    IRQ = 3 | 5 | 7 | 9 | 10 | 11 | 12 | 15 
	    SHARE = NO
	    TRIGGER = LEVEL
	    INIT = IOPORT(3)  10010111 | 10110111 | 11010111 | 11110111 |
	    		      00010111 | 00110111 | 01010111 | 01110111


FUNCTION = "Initialisation byte '1'"
  COMMENTS = "Intialisation byte '1' is used to configure
  	      the internal operation of the card and may not be
	      changed by the user."
  CHOICE = "Not user configurable"
  FREE
	    INIT = IOPORT(2) 11111000


FUNCTION = "Initialisation byte '2'"
  COMMENTS = "Intialisation byte '2' is used to configure
  	      the internal operation of the card and may not be
	      changed by the user."
  CHOICE = "Not user configurable"
  FREE
	    
	    INIT = IOPORT(4) 00000001