; Technology Concepts Ltd ; Grange Estate ; Cwmbran ; Gwent ; NP44 3XR ; Tel: +44 (0)633 872611 ; Fax: +44 (0)633 872329 ; ; ISA PCC/8i or PCC/16i ; CFG Version 1.0b ; 01.06.92 BOARD ID ="TCL0201" ;Product ID NAME = "Technology Concepts PCC/8i & PCC/16i Adapters (ISA)" MFR = "Technology Concepts Ltd" CATEGORY = "COM" SLOT = ISA16 AMPERAGE = 1500 SKIRT = NO READID = NO IOCHECK = INVALID DISABLE = UNSUPPORTED COMMENTS = "The PCC/8i and PCC/16i intelligent I/O controllers provide either 8 or 16 asynchronous serial ports" HELP = "The PCC/8i and PCC/16i do not support full automatic configuration. They occupy 8Kbytes of memory, the base address of which can be set on any 8Kbyte bounndary. The card supports the following IRQs : 3, 5, 7, 9, 10, 11, 12, 15. Switch SW2 and link block LK10 are used to configure the card." SWITCH(1) = 8 STYPE = DIP NAME = "SW2" REVERSE = YES VERTICAL = NO LABEL = LOC(1-8) "1" "2" "3" "4" "5" "6" "7" "8" FACTORY = LOC(1-8) 10010100 ;D600:0 JUMPER(1) = 9 NAME = "LK10" JTYPE = PAIRED VERTICAL = NO REVERSE = YES LABEL = LOC(1-9) "3" "4" "5" "7" "9" "10" "11" "12" "15" FACTORY = LOC(1-9) 000000000 ;NO IRQ FUNCTION = "Base Address" COMMENTS = "The PCC/8i or PCC/16i card occupies 8Kbytes of memory between 640K and 1M. Use the 'Change Resource' option to set the required level. The base address is set via switch SW1." CHOICE = "Any 8k boundary between 640k and 1Meg" FREE MEMORY = 8K ADDRESS = 0A0000h | 0A2000h | 0A4000h | 0A6000h | 0A8000h | 0AA000h | 0AC000h | 0AE000h | 0B0000h | 0B2000h | 0B4000h | 0B6000h | 0B8000h | 0BA000h | 0BC000h | 0BE000h | 0C0000h | 0C2000h | 0C4000h | 0C6000h | 0C8000h | 0CA000h | 0CC000h | 0CE000h | 0D0000h | 0D2000h | 0D4000h | 0D6000h | 0D8000h | 0DA000h | 0DC000h | 0DE000h | 0E0000h | 0E2000h | 0E4000h | 0E6000h | 0E8000h | 0EA000h | 0EC000h | 0EE000h WRITABLE = YES MEMTYPE = OTH SIZE = BYTE CACHE = NO SHARE = NO INIT = SWITCH(1) LOC(1-8) 11111010 | 10111010 | 11011010 | 10011010 | 11101010 | 10101010 | 11001010 | 10001010 | 11110010 | 10110010 | 11010010 | 10010010 | 11100010 | 10100010 | 11000010 | 10000010 | 11111100 | 10111100 | 11011100 | 10011100 | 11101100 | 10101100 | 11001100 | 10001100 | 11110100 | 10110100 | 11010100 | 10010100 | 11100100 | 10100100 | 11000100 | 10000100 | 11111000 | 10111000 | 11011000 | 10011000 | 11101000 | 10101000 | 11001000 | 10001000 FUNCTION = "Interrupt Level" COMMENTS = "The PCC/8i or PCC/16i card can be configured to one of nine interrupt levels. Use the 'Change Resource' option to set the required level. The interrupt level is set via link block LK10." CHOICE = "Choice of : 3, 4, 5, 7, 9, 10, 11, 12, 15" FREE IRQ = 3 | 4 | 5 | 7 | 9 | 10 | 11 | 12 | 15 SHARE = NO TRIGGER = EDGE INIT = JUMPER(1) LOC (1-9) 100000000 | 010000000 | 001000000 | 000100000 | 000010000 | 000001000 | 000000100 | 000000010 | 000000001 CHOICE = "Do not use an interrupt " FREE INIT = JUMPER(1) LOC (1-9) 000000000