;	Technology Concepts Ltd
;	Grange Estate
;	Cwmbran
;	Gwent
;	NP44 3XR
;	Tel: +44 (0)633 872611
;	Fax: +44 (0)633 872329
;
;	ISA PCC/IF Controller
;	CFG Version 1.0b
;	01.06.92.

BOARD
  ID ="TCL0301"			;Product ID
  NAME = "Technology Concepts   PCC/IF Controller (ISA)"
  MFR = "Technology Concepts Ltd"
  CATEGORY = "COM"
  SLOT = ISA16
  AMPERAGE = 1500
  SKIRT = NO
  READID = NO
  IOCHECK = INVALID
  DISABLE = UNSUPPORTED
  COMMENTS = "The PCC/IF card is an intelligent I/O controller
    	      which interfaces to the IF expansion box to 
	      provide between  8 and 32 asynchronous serial ports"
  HELP = "The PCC/IF controller does not support full automatic
  	  configuration. It occupies 8Kbytes of memory, the 
	  base address of which can be set on any 8Kbyte 
	  boundary.  The card supports the following IRQs :
	  3, 5, 7, 9, 10, 11, 12, 15.
	  Switch SW2 and link block LINKS are used to
	  configure the card."
	  
SWITCH(1) = 8
 STYPE = DIP
 NAME = "SW1"
 REVERSE = YES
 VERTICAL = NO
 LABEL = LOC(1-8) "1" "2" "3" "4" "5" "6" "7" "8"
 INITVAL = LOC(1-8) 01111010		

SWITCH(2) = 8
 STYPE = DIP
 NAME = "SW2"
 REVERSE = YES
 VERTICAL = NO
 LABEL = LOC(1-8) "1" "2" "3" "4" "5" "6" "7" "8"
 FACTORY = LOC(1-8) 10010100		;D600:0

JUMPER(1) = 9
 NAME = "LINKS"
 JTYPE = PAIRED
 VERTICAL = NO
 REVERSE = NO
 LABEL = LOC(1-9) "3" "4" "5" "7" "9" "10" "11" "12" "15"
 FACTORY = LOC(1-9) 000000000		;NO IRQ

FUNCTION = "Base Address"
  COMMENTS = "The PCC/IF controller card occupies 8Kbytes of 
  	      memory between 640K and 1M. Use the 'Change
	      Resource' option to set the required level.
	      The base address is set via switch SW2."
	      
  CHOICE = "Any 8k boundary between 640k and 1Meg"
  FREE
  	    MEMORY = 8K
	    ADDRESS = 
	    0A0000h | 0A2000h | 0A4000h | 0A6000h |
	    0A8000h | 0AA000h | 0AC000h | 0AE000h |
	    0B0000h | 0B2000h | 0B4000h | 0B6000h |
	    0B8000h | 0BA000h | 0BC000h | 0BE000h |
	    0C0000h | 0C2000h | 0C4000h | 0C6000h |
	    0C8000h | 0CA000h | 0CC000h | 0CE000h |	    
	    0D0000h | 0D2000h | 0D4000h | 0D6000h |
	    0D8000h | 0DA000h | 0DC000h | 0DE000h |
	    0E0000h | 0E2000h | 0E4000h | 0E6000h |
	    0E8000h | 0EA000h | 0EC000h | 0EE000h 
	    WRITABLE = YES
	    MEMTYPE = OTH
	    SIZE = BYTE
	    CACHE = NO
	    SHARE = NO
	    INIT = SWITCH(2) LOC(1-8)
	    11111010 | 10111010 | 11011010 | 10011010 |
	    11101010 | 10101010 | 11001010 | 10001010 |
	    11110010 | 10110010 | 11010010 | 10010010 |
	    11100010 | 10100010 | 11000010 | 10000010 |
	    11111100 | 10111100 | 11011100 | 10011100 |
	    11101100 | 10101100 | 11001100 | 10001100 |
	    11110100 | 10110100 | 11010100 | 10010100 |
	    11100100 | 10100100 | 11000100 | 10000100 |
	    11111000 | 10111000 | 11011000 | 10011000 |
	    11101000 | 10101000 | 11001000 | 10001000  
	    	    
FUNCTION = "Interrupt Level"
  COMMENTS = "The PCC/IF controller card can be configured to one of
  	      nine interrupt levels.  Use the 'Change 
	      Resource' option to set the required level.
	      The interrupt level is set via link block LINKS."
  CHOICE = "Choice of : 3, 4, 5, 7, 9, 10, 11, 12, 15"
  FREE
  	    IRQ = 3 | 4 | 5 | 7 | 9 | 10 | 11 | 12 | 15 
	    SHARE = NO
	    TRIGGER = EDGE
	    INIT = JUMPER(1) LOC (1-9) 100000000 | 010000000 | 001000000 | 
	    			       000100000 | 000010000 | 000001000 | 
				       000000100 | 000000010 | 000000001 

  CHOICE = "Do not use an interrupt "
  FREE
	    INIT = JUMPER(1) LOC (1-9) 000000000