;	Technology Concepts Ltd
;	Grange Estate
;	Cwmbran
;	Gwent
;	NP44 3XR
;	Tel: +44 (0)633 872611
;	Fax: +44 (0)633 872329
;
;	ISA CC4, CC/4B
;	CFG Version 1.0a
BOARD
  ID ="TCL0403"			;Product ID
  NAME = "CC/4, CC/4B Adapter (ISA) PAL HCASARH4"
  MFR = "Technology Concepts Ltd"
  CATEGORY = "COM"
  SLOT = ISA8OR16
  AMPERAGE = 1000
  SKIRT = NO
  READID = NO
  IOCHECK = INVALID
  DISABLE = UNSUPPORTED
  COMMENTS = "The CC4 cards provide 4 asynchronous serial ports"
  HELP = "The CC4 adapters do not support full automatic
  	  configuration. The adapter supports a number of
	  emulation and address options which are set via 
	  an 8 way switch. The adapters supports the
	  following IRQs :
	  3, 4, 5, 7, 9, 10, 11, 12, 15."
	  
SWITCH(1) = 8
 STYPE = DIP
 NAME = "SW1"
 REVERSE = NO
 VERTICAL = NO
 LABEL = LOC(1-8) "1" "2" "3" "4" "5" "6" "7" "8"
 FACTORY = LOC(1-8) 00010010

JUMPER(1) = 9
 NAME = "LK2 IRQ"
 JTYPE = TRIPOLE
 VERTICAL = NO
 REVERSE = YES
 LABEL = LOC(1-9) "2" "3" "4" "5" "7" "10" "11" "12" "15"
 FACTORY = LOC(1-9) n1nnnnnnn		;IRQ 3

FUNCTION = "Emulation / Base Address"
  COMMENTS = "Select the required emulation mode and base address" 
  
  CHOICE = "AST 1A0H"
  LINK
  PORT=01a0H-019fH
  INIT=SWITCH(1) LOC (1-8) 10100000
  
  CHOICE = "AST 2A0H"
  LINK
  PORT=02A0H-029fH
  INIT=SWITCH(1) LOC (1-8) 10100001
  
  CHOICE = "Arnet 180H"
  LINK
  PORT=0180H-01c2H
  INIT=SWITCH(1) LOC (1-8) 10110010
  
  CHOICE = "Arnet 280H"
  LINK
  PORT=0280H-02c2H
  INIT=SWITCH(1) LOC (1-8) 10110011
  
  CHOICE = "Hostess 280H"
  LINK
  PORT=0280H-029fH 
  INIT=SWITCH(1) LOC (1-8) 10010100
  
  CHOICE = "Hostess 280H"
  LINK
  PORT=0280H-02bfH
  INIT=SWITCH(1) LOC (1-8) 10010101
  
FUNCTION = "Interrupt Level"
  COMMENTS = "The CC card can be configured to one of
  	      nine interrupt levels.  Use the 'Change 
	      Resource' option to set the required level.
	      The interrupt level is set via link block LK2."
  CHOICE = "Choice of : 3, 4, 5, 7, 9, 10, 11, 12, 15"
  FREE
  	    IRQ = 3 | 4 | 5 | 7 | 9 | 10 | 11 | 12 | 15 
	    SHARE = NO
	    TRIGGER = EDGE
	    INIT = JUMPER(1) LOC (1-9) 1nnnnnnnn | n1nnnnnnn | nn1nnnnnn | 
	    			       nnn1nnnnn | nnnn1nnnn | nnnnn1nnn | 
				       nnnnnn1nn | nnnnnnn1n | nnnnnnnn1

  CHOICE = "Do not use an interrupt "
  FREE
	    INIT = JUMPER(1) LOC (1-9) nnnnnnnnn