; ; Copyright (C) 1994 Thomas-Conrad Corporation ; All Rights Reserved. ; ; TCVG045 Thomas-Conrad VG-AnyLan Adapter EISA Configuration File ; ; Date = V1.02 (950413) ; Filename = !TCOA045.CFG ; BOARD ID = "TCOA045" NAME = "TCVG045 Thomas-Conrad 100VG-AnyLAN ISA Adapter" MFR = "Thomas-Conrad Corporation" CATEGORY = "NET" SLOT = ISA16 LENGTH = 336 IOCHECK = INVALID DISABLE = UNSUPPORTED COMMENTS = "\nThe Thomas-Conrad TCVG045 is a high performance 100VG-AnyLan Adapter with an ISA host interface. Key features of the adapter include:\n\n \t* High performance network access\n \t* Automatic media selection (10Base-T or 100VG-AnyLAN)\n \t* Remote Reset ROM\n\n To configure the TCVG045 adapter, use the Thomas-Conrad utility program QSETVG.EXE or VGTOOLS.EXE. This EISA configuration file is furnished as a configuration assist, and will not actually modify the adapter's configuration." HELP = "Configuration File !TCOA045.CFG must be used with the Thomas-Conrad TCVG045 100VG-AnyLAN ISA adapter." FUNCTION = "Base I/O Address" COMMENTS = "Select the Base I/O Address as configured for the adapter by QSETVG or VGTOOLS.\n" CHOICE = "100" LINK PORT=0100h-013Fh CHOICE = "140" LINK PORT=0140h-017Fh CHOICE = "180" LINK PORT=0180h-01BFh CHOICE = "1C0" LINK PORT=0100h-01FFh CHOICE = "200" LINK PORT=0200h-023Fh CHOICE = "240" LINK PORT=0240h-027Fh CHOICE = "280" LINK PORT=0280h-02BFh CHOICE = "2C0" LINK PORT=02C0h-02FFh CHOICE = "300" LINK PORT=0300h-033Fh CHOICE = "340" LINK PORT=0340h-037Fh CHOICE = "380" LINK PORT=0380h-03BFh FUNCTION = "Interrupt Request (IRQ)" COMMENTS = "Select the Interrupt Request as configured for the adapter by QSETVG or VGTOOLS.\n" CHOICE = "Irq 3" LINK IRQ = 3 CHOICE = "Irq 4" LINK IRQ = 4 CHOICE = "Irq 5" LINK IRQ = 5 CHOICE = "Irq 7" LINK IRQ = 7 CHOICE = "Irq 2/9" LINK IRQ = 9 CHOICE = "Irq 10" LINK IRQ = 10 CHOICE = "Irq 11" LINK IRQ = 11 CHOICE = "Irq 12" LINK IRQ = 12 CHOICE = "Irq 15" LINK IRQ = 15 FUNCTION = "Remote Reset ROM (RPL)" TYPE = "ROM" COMMENTS = "Select the Remote Reset ROM address, as configured for the adapter by QSETVG or VGTOOLS." HELP = "The default Disabled option should be used in computers that boot from a local hard or floppy disk. The Enabled option allows the computer to boot from a file server instead of a local disk.\n" CHOICE = "Disabled" SUBTYPE = "DIS" ; ; CHOICE = "Enabled" ; SUBTYPE = "EN" ; LINK ; MEMORY = 32K ; ADDRESS = 0D0000h | 0E0000h ; WRITABLE = NO ; SIZE = WORD ; DECODE = 20