;-------------------------------------------------------;
; * * Western Digital 7000-EX SCSI Host Bus Adapter * * ;
; * * Western Digital Corporation                   * * ;
; * * Copyright (c) 1990-1991                       * * ;
; * * All Rights Reserved                           * * ;
; * * Version 1.0                                   * * ;
;-------------------------------------------------------;
BOARD
        ID = "WDC2001"
        NAME = "WD 7000-EX SCSI Host Bus Adapter "
        MFR = "Western Digital"
        CATEGORY = "MSD"
        SLOT = EISA
        READID = YES
        BUSMASTER = 50
        IOCHECK = INVALID
        DISABLE = UNSUPPORTED
        COMMENTS = "Western Digital 7000-EX Configuration File Version 1.0"

IOPORT(1) = 0zC85h	INITVAL = xxxxxxxxb   	;AutoConfiguration Register 1
IOPORT(2) = 0zC86h	INITVAL = xxxxxxxxb	;AutoConfiguration Register 2
IOPORT(3) = 0zC87h	INITVAL = 0000xxxxb	;AutoConfiguration Register 3

FUNCTION = "Adapter Options"
	TYPE = "Options"
	SUBFUNCTION = "Protocol Mode"
		TYPE = "Mode"
                CHOICE = "DACB Protocol"
                     SUBTYPE = "DACB"
	    		FREE
	      		PORT = 0zC80h-0zCFFh
		     	INIT = IOPORT(3) LOC(3-0) 0001		;Set EX in DACB Mode

		CHOICE = "ASC Protocol, 300H"
                     SUBTYPE = "ASC300"
			FREE
	      		PORT = 0zC80h-0zCFFh
	      		PORT = 300h-302h
		     	INIT = IOPORT(3) LOC(3-0) 0110		;Set EX in ASC Mode, 300H

		CHOICE = "ASC Protocol, 310H"
                     SUBTYPE = "ASC310"
			FREE
	      		PORT = 0zC80h-0zCFFh
	      		PORT = 310h-312h
		     	INIT = IOPORT(3) LOC(3-0) 1000		;Set EX in ASC Mode, 310H

		CHOICE = "ASC Protocol, 320H"
                     SUBTYPE = "ASC320"
			FREE
	      		PORT = 0zC80h-0zCFFh
	      		PORT = 320h-322h
		     	INIT = IOPORT(3) LOC(3-0) 0100		;Set EX in ASC Mode, 320H

		CHOICE = "ASC Protocol, 340H"
                     SUBTYPE = "ASC340"
			FREE
	      		PORT = 0zC80h-0zCFFh
	      		PORT = 340h-342h
		     	INIT = IOPORT(3) LOC(3-0) 0010		;Set EX in ASC Mode, 340H

		CHOICE = "ASC Protocol, 350H"
                     SUBTYPE = "ASC350"
			FREE
	      		PORT = 0zC80h-0zCFFh
	      		PORT = 350h-352h
		     	INIT = IOPORT(3) LOC(3-0) 0000		;Set EX in ASC Mode, 350H

		CHOICE = "ASC Protocol, 360H"
                     SUBTYPE = "ASC360"
			FREE
	      		PORT = 0zC80h-0zCFFh
	      		PORT = 360h-362h
		     	INIT = IOPORT(3) LOC(3-0) 1010		;Set EX in ASC Mode, 360H

		CHOICE = "ASC Protocol, 370H"
                     SUBTYPE = "ASC370"
			FREE
	      		PORT = 0zC80h-0zCFFh
	      		PORT = 370h-372h
		     	INIT = IOPORT(3) LOC(3-0) 1100		;Set EX in ASC Mode, 370H

		CHOICE = "ASC Protocol, 380H"
                     SUBTYPE = "ASC380"
			FREE
	      		PORT = 0zC80h-0zCFFh
	      		PORT = 380h-382h
		     	INIT = IOPORT(3) LOC(3-0) 1110		;Set EX in ASC Mode, 380H

	SUBFUNCTION = "BIOS Address"
		TYPE = "BIOS"
	  	CHOICE = "0DC000H - 0DFFFFH"
	    		FREE
		     	INIT = IOPORT(1) LOC(3-0) 1000		
	  	CHOICE = "0D8000H - 0DBFFFH"
	    		FREE
		     	INIT = IOPORT(1) LOC(3-0) 0111		
	  	CHOICE = "0D4000H - 0D7FFFH"
	    		FREE
		     	INIT = IOPORT(1) LOC(3-0) 0110		
	  	CHOICE = "0D0000H - 0D3FFFH"
	    		FREE
		     	INIT = IOPORT(1) LOC(3-0) 0101		
	  	CHOICE = "0CC000H - 0CFFFFH"
	    		FREE
		     	INIT = IOPORT(1) LOC(3-0) 0100
	  	CHOICE = "0C8000H - 0CBFFFH"
	    		FREE
		     	INIT = IOPORT(1) LOC(3-0) 0011		
	  	CHOICE = "0C4000H - 0C7FFFH"
	    		FREE
		     	INIT = IOPORT(1) LOC(3-0) 0010		
	  	CHOICE = "0C0000H - 0C3FFFH"
	    		FREE
		     	INIT = IOPORT(1) LOC(3-0) 0001		
	  	CHOICE = "Disabled"
	    		FREE
		     	INIT = IOPORT(1) LOC(3-0) 0000		;Disable BIOS Access
	SUBFUNCTION = "Interrupt Request Level"
		TYPE = "IRQ"
	  	CHOICE = "IRQ 14"
	    		FREE
			IRQ = 14
				TRIGGER = EDGE
		     	INIT = IOPORT(1) LOC(5-4) 10		
	  	CHOICE = "IRQ 15"
	    		FREE
			IRQ = 15
				TRIGGER = EDGE
		     	INIT = IOPORT(1) LOC(5-4) 11		
	  	CHOICE = "IRQ 12"
	    		FREE
			IRQ = 12
				TRIGGER = EDGE
		     	INIT = IOPORT(1) LOC(5-4) 01		
	  	CHOICE = "IRQ 10"
	    		FREE
			IRQ = 10
				TRIGGER = EDGE
		     	INIT = IOPORT(1) LOC(5-4) 00		
	SUBFUNCTION = "Bus Preempt Time"
		TYPE = "Preempt"
	  	CHOICE = "32 BCLKS"
	    		FREE
		     	INIT = IOPORT(1) LOC(7-6) 01		
	  	CHOICE = "64 BCLKS"
	    		FREE
		     	INIT = IOPORT(1) LOC(7-6) 10		
FUNCTION = "SCSI Channel 0"
	TYPE = "SCSI"
	SUBFUNCTION = "Adapter SCSI ID"
		TYPE = "IDCH0"
		CHOICE = "SCSI ID = 7"
	     		FREE
			INIT = IOPORT(2) LOC(2-0) 111
		CHOICE = "SCSI ID = 6"
	     		FREE
			INIT = IOPORT(2) LOC(2-0) 110
		CHOICE = "SCSI ID = 5"
	     		FREE
			INIT = IOPORT(2) LOC(2-0) 101
		CHOICE = "SCSI ID = 4"
	     		FREE
			INIT = IOPORT(2) LOC(2-0) 100
		CHOICE = "SCSI ID = 3"
	     		FREE
			INIT = IOPORT(2) LOC(2-0) 011
		CHOICE = "SCSI ID = 2"
	     		FREE
			INIT = IOPORT(2) LOC(2-0) 010
		CHOICE = "SCSI ID = 1"
	     		FREE
			INIT = IOPORT(2) LOC(2-0) 001
		CHOICE = "SCSI ID = 0"
	     		FREE
			INIT = IOPORT(2) LOC(2-0) 000
	SUBFUNCTION = "SCSI Parity"
		TYPE = "PARITYCH0"
		CHOICE = "Enabled"
	     		FREE
			INIT = IOPORT(2) LOC(3) 1
		CHOICE = "Disabled"
	     		FREE
			INIT = IOPORT(2) LOC(3) 0
FUNCTION = "SCSI Channel 1"
	TYPE = "SCSI"
	SUBFUNCTION = "Adapter SCSI ID"
		TYPE = "IDCH1"
		COMMENTS = "\tChannel 1 SCSI ID is ONLY valid for\n
			    \ta dual channel adapter in DACB Mode"
		CHOICE = "SCSI ID = 7"
	     		FREE
			INIT = IOPORT(2) LOC(6-4) 111
		CHOICE = "SCSI ID = 6"
	     		FREE
			INIT = IOPORT(2) LOC(6-4) 110
		CHOICE = "SCSI ID = 5"
	     		FREE
			INIT = IOPORT(2) LOC(6-4) 101
		CHOICE = "SCSI ID = 4"
	     		FREE
			INIT = IOPORT(2) LOC(6-4) 100
		CHOICE = "SCSI ID = 3"
	     		FREE
			INIT = IOPORT(2) LOC(6-4) 011
		CHOICE = "SCSI ID = 2"
	     		FREE
			INIT = IOPORT(2) LOC(6-4) 010
		CHOICE = "SCSI ID = 1"
	     		FREE
			INIT = IOPORT(2) LOC(6-4) 001
		CHOICE = "SCSI ID = 0"
	     		FREE
			INIT = IOPORT(2) LOC(6-4) 000
	SUBFUNCTION = "SCSI Parity"
		TYPE = "PARITYCH1"
		COMMENTS = "\tChannel 1 SCSI parity is ONLY valid for\n
			    \ta dual channel adapter in DACB Mode"
		CHOICE = "Enabled"
	     		FREE
			INIT = IOPORT(2) LOC(7) 1
		CHOICE = "Disabled"
	     		FREE
			INIT = IOPORT(2) LOC(7) 0