;--------------------------------------------------------;
; * * Future Domain TMC-7000EX SCSI Host Bus Adapter * * ;
; * * Future Domain Corporation 		     * * ;
; * * Copyright (c) 1990-1992			     * * ;
; * * All Rights Reserved			     * * ;
; * * Version 1.6				     * * ;
; * * Part Number #84-000345			     * * ;
;--------------------------------------------------------;
BOARD
	ID = "WDC2001"                  ;Product ID
	NAME = "Future Domain TMC-7000EX EISA SCSI Controller "
	MFR = "Future Domain Corporation"
	CATEGORY = "MSD"                ;Mass Storage Device
	SLOT = EISA			;Fits in EISA slot only
	READID = YES			;EISA ID registers'values are valid
	BUSMASTER = 50
	IOCHECK = INVALID		;EISA IOCHKERR bit is not supported
	DISABLE = UNSUPPORTED		;EISA ENABLE bit is not supported
	COMMENTS = "Future Domain TMC-7000EX Configuration File Version 1.6"
   HELP = "Future Domain Customer Service
	2801 McGaw Ave. Irvine, CA 92714
	(714) 253-0440 8AM-5PM (PST) "

IOPORT(1) = 0zC85h	INITVAL = xxxxxxxxb	;AutoConfiguration Register 1
IOPORT(2) = 0zC86h	INITVAL = xxxxxxxxb	;AutoConfiguration Register 2
IOPORT(3) = 0zC87h	INITVAL = 0000xxxxb	;AutoConfiguration Register 3

FUNCTION = "Adapter Options"
    TYPE = "CST,Future Domain Corp"                        ; Max of 40 characters, blank fill
	   SUBFUNCTION = "Protocol Mode"                   ; after terminating message with '$'
		  CHOICE = "DACB Protocol"                 ; Change CST to STD for Standard message
		     SUBTYPE = "DACB00"
			FREE
			PORT = 0zC80h-0zCFFh
			INIT = IOPORT(3) LOC(3-0) 0001		;Set EX in DACB Mode

	       CHOICE = "ASC Protocol, 300H"
		     SUBTYPE = "ASC300"
			FREE
			PORT = 0zC80h-0zCFFh
			PORT = 300h-302h
			INIT = IOPORT(3) LOC(3-0) 0110		;Set EX in ASC Mode, 300H

	       CHOICE = "ASC Protocol, 310H"
		     SUBTYPE = "ASC310"
			FREE
			PORT = 0zC80h-0zCFFh
			PORT = 310h-312h
			INIT = IOPORT(3) LOC(3-0) 1000		;Set EX in ASC Mode, 310H

	       CHOICE = "ASC Protocol, 320H"
		     SUBTYPE = "ASC320"
			FREE
			PORT = 0zC80h-0zCFFh
			PORT = 320h-322h
			INIT = IOPORT(3) LOC(3-0) 0100		;Set EX in ASC Mode, 320H

	       CHOICE = "ASC Protocol, 340H"
		     SUBTYPE = "ASC340"
			FREE
			PORT = 0zC80h-0zCFFh
			PORT = 340h-342h
			INIT = IOPORT(3) LOC(3-0) 0010		;Set EX in ASC Mode, 340H

	       CHOICE = "ASC Protocol, 350H"
		     SUBTYPE = "ASC350"
			FREE
			PORT = 0zC80h-0zCFFh
			PORT = 350h-352h
			INIT = IOPORT(3) LOC(3-0) 0000		;Set EX in ASC Mode, 350H

	       CHOICE = "ASC Protocol, 360H"
		     SUBTYPE = "ASC360"
			FREE
			PORT = 0zC80h-0zCFFh
			PORT = 360h-362h
			INIT = IOPORT(3) LOC(3-0) 1010		;Set EX in ASC Mode, 360H

	       CHOICE = "ASC Protocol, 370H"
		     SUBTYPE = "ASC370"
			FREE
			PORT = 0zC80h-0zCFFh
			PORT = 370h-372h
			INIT = IOPORT(3) LOC(3-0) 1100		;Set EX in ASC Mode, 370H

	       CHOICE = "ASC Protocol, 380H"
		     SUBTYPE = "ASC380"
			FREE
			PORT = 0zC80h-0zCFFh
			PORT = 380h-382h
			INIT = IOPORT(3) LOC(3-0) 1110		;Set EX in ASC Mode, 380H

	SUBFUNCTION = "BIOS Address"
	       CHOICE = "0DC000H - 0DFFFFH"
			FREE
			INIT = IOPORT(1) LOC(3-0) 1000
	       CHOICE = "0D8000H - 0DBFFFH"
			FREE
			INIT = IOPORT(1) LOC(3-0) 0111
	       CHOICE = "0D4000H - 0D7FFFH"
			FREE
			INIT = IOPORT(1) LOC(3-0) 0110
	       CHOICE = "0D0000H - 0D3FFFH"
			FREE
			INIT = IOPORT(1) LOC(3-0) 0101
	       CHOICE = "0CC000H - 0CFFFFH"
			FREE
			INIT = IOPORT(1) LOC(3-0) 0100
	       CHOICE = "0C8000H - 0CBFFFH"
			FREE
			INIT = IOPORT(1) LOC(3-0) 0011
	       CHOICE = "0C4000H - 0C7FFFH"
			FREE
			INIT = IOPORT(1) LOC(3-0) 0010
	       CHOICE = "0C0000H - 0C3FFFH"
			FREE
			INIT = IOPORT(1) LOC(3-0) 0001
	       CHOICE = "Disabled"
			FREE
			INIT = IOPORT(1) LOC(3-0) 0000		;Disable BIOS Access
	SUBFUNCTION = "Interrupt Request Level"
	       CHOICE = "IRQ 15"
		     SUBTYPE = "IRQ15"
			FREE
			IRQ = 15
			TRIGGER = EDGE
			INIT = IOPORT(1) LOC(5-4) 11
	       CHOICE = "IRQ 14"
		     SUBTYPE = "IRQ14"
			FREE
			IRQ = 14
			TRIGGER = EDGE
			INIT = IOPORT(1) LOC(5-4) 10
	       CHOICE = "IRQ 12"
		     SUBTYPE = "IRQ12"
			FREE
			IRQ = 12
			TRIGGER = EDGE
			INIT = IOPORT(1) LOC(5-4) 01
	       CHOICE = "IRQ 10"
		     SUBTYPE = "IRQ10"
			FREE
			IRQ = 10
			TRIGGER = EDGE
			INIT = IOPORT(1) LOC(5-4) 00
	SUBFUNCTION = "Bus Preempt Time"
	       CHOICE = "32 BCLKS"
			FREE
			INIT = IOPORT(1) LOC(7-6) 01
	       CHOICE = "64 BCLKS"
			FREE
			INIT = IOPORT(1) LOC(7-6) 10

FUNCTION = "SCSI Channel"
    TYPE = "SCS,CHA"
	SUBFUNCTION = "Adapter SCSI ID"
	       CHOICE = "SCSI ID = 7"
			FREE
			INIT = IOPORT(2) LOC(2-0) 111
	       CHOICE = "SCSI ID = 6"
			FREE
			INIT = IOPORT(2) LOC(2-0) 110
	       CHOICE = "SCSI ID = 5"
			FREE
			INIT = IOPORT(2) LOC(2-0) 101
	       CHOICE = "SCSI ID = 4"
			FREE
			INIT = IOPORT(2) LOC(2-0) 100
	       CHOICE = "SCSI ID = 3"
			FREE
			INIT = IOPORT(2) LOC(2-0) 011
	       CHOICE = "SCSI ID = 2"
			FREE
			INIT = IOPORT(2) LOC(2-0) 010
	       CHOICE = "SCSI ID = 1"
			FREE
			INIT = IOPORT(2) LOC(2-0) 001
	       CHOICE = "SCSI ID = 0"
			FREE
			INIT = IOPORT(2) LOC(2-0) 000
	SUBFUNCTION = "SCSI Parity"
	       CHOICE = "Enabled"
			FREE
			INIT = IOPORT(2) LOC(3) 1
	       CHOICE = "Disabled"
			FREE
			INIT = IOPORT(2) LOC(3) 0