9404 IBM AS/400 System Unit Model CXX


Table of Contents

9404 IBM AS/400 System Unit Model CXX
IBM U.S. Product Life Cycle Dates
Abstract
Highlights
Description
Models

·  Model Summary Matrix

·  Maximum

·  Customer Setup (CSU)

·  Devices Supported

·  Model Conversions

·  National Language Support

Technical Description

·  Physical Specifications

·  Operating Environment

·  Limitations

·  Hardware Requirements

·  Software Requirements

·  Electronic Customer Support

Publications
Features -- Specify/Special/Exchange

·  No Charge Specify Codes

·  Special Feature Codes -- Chargeable

·  Feature Exchanges

Accessories

·  Customer Replacement Parts

Machine Elements
Supplies


9404 IBM AS/400 System Unit Model CXX


IBM U.S. Product Life Cycle Dates

 
                                   Marketing   Service      Replaced
Type Model Announced   Available   Withdrawn   Discontinued    By

 

9404-C10   1990/02/06  1990/02/23  1991/12/03  2004/12/31       -

9404-C20   1990/02/06  1990/02/23  1991/12/03  2004/12/31       -

9404-C25   1990/02/06  1990/02/23  1991/12/03  2004/12/31       -

 


Abstract

The IBM Application System/400* (AS/400*) family consists of various processor models that offer a broad range of processing power. These attractively packaged systems feature the latest technology, superior quality and reliability, and improved price/performance. This family supports a broad range of users with a single flexible, high-function operating system, a wide offering of communications capabilities, extensive connectivity, a rich office offering, strong integrated PC support, and many unique programmer productivity tools. The AS/400 family is designed for ease of operation with extensive menu prompts, and comprehensive help text available. Also included is innovative electronic customer support which provides automatic on-line problem determination and capability for direct connection to IBM and user support data bases through the use of a modem. The 9404 System Unit is designed for a "quiet office" environment such as a private office or library. The 9404 Models B20/C20/C25 and all of the D, E, and F model System Units with the Expansion Unit (#7100, #7110, or #7120) are acoustically designed to operate in a "general business" environment, such as administrative, bookkeeping, word processing, and terminal areas.

Model Abstract 9404-C10

(For IBM US, No Longer Available as of December 3, 1991)

The Model C10 has a System Unit, 8 MB Main Storage, 640 MB DASD.

Model Abstract 9404-C20

(For IBM US, No Longer Available as of December 3, 1991)

The Model C20 has a System Unit, 8 MB Main Storage, 640 MB DASD.

Model Abstract 9404-C25

(For IBM US, No Longer Available as of December 3, 1991)

The Model C25 has a System Unit, 8 MB Main Storage, 640 MB DASD.

Models C10, C20, and C25 come with two 3-1/2 inch direct access disk units standard, and can optionally add one or two drives, either feature #6100 and/or #6105, for a storage capacity range from 640 MB to 1280 MB.

DASD dual disk unit features #6106 and #6108 are available on all 9404 C model systems. This increases the maximum DASD on the C10 model to 1920 MB. An optional expansion unit, feature #7100, is available for Models C20 and C25 for additional DASD expansion. DASD on the Models C20 and C25 can be increased to a total of 3840 MB with the installation of Additional Dual Disk Units (#6108), in all available optional DASD positions in both the System Unit and the expansion unit. See feature #6108 for prerequisites.


Highlights


Description

The 9404 System Units are the mid-priced/mid-size members of the AS/400 family. The 9404 has a compact, floor-standing package, that extends full AS/400 function to a broad range of customers.

The small size and quiet operation of the system unit allows it to be installed in a quiet office environment, such as a private office or library. The 9404 Model B20/C20/C25 and all of the D, E, and F model System Units with the Expansion Unit (#7100/#7110/#7120) are acoustically designed to operate in a general business environment, such cs administrative, bookkeeping, word processing, and terminal areas.

Customers who order the Operating System/400* (OS/400*) with their original hardware order may elect to receive it preloaded on the system unit. Refer to Operating System/400 (5738-SS1, 5763-SS1), for disk storage requirements for OS/400 software.

The 9404 offers integrated twinaxial, ASCII, and LocalTalk workstation controllers for attachment of a wide variety of displays and printers. One Twinaxial Workstation Controller, ASCII Workstation Controller, or Workstation Adapter (LocalTalk) must be specified as part of the base 9404. Attachment to the IBM Token-Ring and Ethernet networks is provided via optional adapters.

Electronic customer support included in the Operating System/400 may be accessed for remote support, service, and information, for improved customer productivity.

The Battery Power Unit feature is standard on the 9404 E and F models and optional on the B, C and D model system. The Battery Power Unit can improve the availability of the system by providing power to the system unit for a minimum of five minutes during a power failure.

The 9404 System Unit is installed by IBM service personnel. Model upgrades and installation of features are also performed by IBM service personnel.

9404 Base System Unit Description

The base system unit is comprised of a processor and main storage on the processor card, one internal I/O bus, disk drive(s), one 1/4-inch cartridge tape unit, one Multi-Function I/O Processor, a workstation controller, and one EIA 232/v.24 adapter and cable. The Battery Backup Unit is included with the 9404 E and F model systems and is optional on the other models. See the System Unit comparison table that follow for feature ranges of each model.

The 9404 System Unit is designed to minimize the physical space required for small and mid-range configurations, while providing modular expansion.

A modem is required for electronic customer support, but is not a component of the base system.

Processors

The system processor uses Very Large Scale Integration (VLSI) logic and has a 32-bit data path and 48-bit addressing that has the capability to provide direct access to 281 terabytes of storage. It is implemented with a software and hardware architecture that can accommodate up to 64-bit addressing. This architecture accommodates the needs of advanced applications such as voice, image and artificial intelligence.

Automatic Operations

The 9404 provides the following automatic operations.

Disk Units

Models C10, C20, and C25 come with two 3-1/2 inch direct access disk units standard, and can optionally add one or two drives, either feature #6100 and/or #6105, for a storage capacity range from 640 MB to 1280 MB.

DASD dual disk unit features #6106 and #6108 are available on all 9404 B and C model systems. This increases the maximum DASD on the B10 and C10 models to 1920 MB. An optional expansion unit, feature #7100, is available for Models B20, C20, and C25 for additional DASD expansion. DASD on the Models B20, C20, and C25 can be increased to a total of 3840 MB with the installation of Additional Dual Disk Units (#6108), in all available optional DASD positions in both the System Unit and the expansion unit. See feature #6108 for prerequisites.

9404 System Unit model upgrades do not include any changes to the base DASD devices.

Programs and data are stored on the disk for processing. Data can be stored offline for security or backup purposes by copying the data to tape or diskettes.

The specifications for each disk unit are:

 

                  Disk Unit         Disk Unit         Disk Unit

                  315 MB            320 MB            400 MB

 

Bytes/Sector:     512 Bytes         512 Bytes         512 Bytes

Bytes/Cylinder:   258,048 Bytes     337,389 Bytes     334,177 Bytes

Cylinders/Drive:  1223 cylinders    949 Cylinders     1199 Cylinders

Capacity/Drive:   315,592,704 Bytes 320,182,272 Bytes 400,678,912 Bytes

Avg Access Time:  21.5 msec         12.5 msec         11.5 msec

Rotational Speed: 3283 rpm          4316 rpm          4316 rpm

Instantaneous

   Data Rate:     1.25 MBytes/sec   2 MBytes/sec      2 MBytes/sec

 

                  Disk Unit          Disk Unit          Disk Unit

                  988 MB             1.96 GB            1.03 GB

 

Bytes/Sector:     512 Bytes          512 Bytes          512 Bytes

Bytes/Cylinder:   482,110 Bytes      688,529 Bytes      248,069 Bytes

Cylinders/Drive:  2051 cylinders     2857 cylinders     4119 cylinders

Capacity/Drive:  988,807,680 Bytes  1967,128,576 Bytes 1031,798,784 Bytes

Avg Access Time:  11.0 msec          9.5 msec           8.8 msec

Rotational Speed: 4316 rpm           5400 rpm           5400 rpm

Instantaneous

   Data Rate:     3MBytes/sec        5.22 MBytes/sec    5 or 6 MBytes/sec

                                     (non-banded)       (banded)

 

1/4-inch Cartridge Tape Units (base 9404 B/C/D/E/F Models)

The 1/4-inch cartridge tape drive is a low cost, high-function, streaming tape drive used for save/restore, alternate IPL, program distribution, migration, and 1/4-inch Cartridge tape interchange. An optional 1.2 GB 1/4-inch cartridge tape unit feature, available on the 9404 Model D25 and on all 9404 E models, and standard on the 9404 F models, can store up to 1.2 GB of data with an effective data rate of 300 KB per second when operating in the 1.2 GB format with IBM 1.2 GB Data Cartridge media. The 525 MB tape unit, standard on the 9404 D and E models, can store up to 525 MB of data with an effective data rate of 200 KB per second when operating in the 525 MB format with IBM 6525 Data Cartridge media. The 120 MB tape unit, standard on the 9404 B and C models, and allowed on D model upgrades, can store up to 120 MB of data with an effective data rate of 90KB per second when operating in the 120 MB format with IBM 6150 Data Cartridge media. An optional 2.5 GB 1/4-Inch Cartridge Tape Unit is available on select D,E and F models.

The effective data rate and media capacity may be increased approximately 1.4 times with Hardware Data Compression (HDC) for save restore functions and is available on the D25 and all E and F models in the Multi-Function I/O Processor and in the IOP in the #7110 or #7120 expansion units.

Full interchange of data is supported with all the standard and optional 1/4-inch cartridge tape units provided on the 9402, 9404, and 9406 models. Read only migration support is provided from the IBM 6157 Model 001 tape unit or the 5363 53MB internal tape drive (System/36 feature #2605) when written in the System/36 format.

9404 Multi-Function I/O Processor

The Multi-Function I/O Processor and one EIA 232/V.24 one-line communications adapter are standard features of the 9404 system unit. In addition to DASD, Diskette, and 1/4-inch cartridge tape unit, the Multi-Function I/O Processor supports two communication lines.

The standard EIA 232/V.24 one-line adapter is provided for use with the IBM electronic customer support facility on the first communication line. This adapter is equipped with an enhanced cable that provides attachment to an IBM 5853, 7855 or equivalent modem. The first line supports switched line facilities operating at 2,400 bps or 9,600 bps using SDLC protocol. Electronic customer support leased facilities may operate at speeds up to 19,200 bps on the first line; 9,600 bps using the IBM 7855 modem.

A remote power-on capability designed so that the system can be powered on via a telephone call to the IBM 5853 or 7855 electronic customer support modem is supported only on the first line. V.32 modems other than the IBM 7855 modem have not been tested and may not operate with the remote power-on capability.

An EIA 232/V.24, X.21, or V.35 Adapter are optional features that may be added to expand the capability to two lines. The Multiple function I/O Processor supports ASYNC, BSC, SDLC, X.25 protocols and the X.21 Short Hold Mode function with a maximum aggregate line speed of 21,600 bps (83,200 bps on the model D25 and E and F models).

Workstation Controllers

A maximum of three workstation controllers is supported in the 9404 model B, C, and D System Units. One Twinaxial Workstation Controller and one or two ASCII Workstation Controllers may be installed concurrently. On the Model D25 only, one or two Twinaxial Workstation Controllers and 1, 2, or 3 ASCII controllers for a maximum of three controllers may be installed. This support is provided to allow the user to attach a broader range of devices to a 9404 System Unit. In addition, each ASCII Workstation Controller may have the optional ASCII 12-port Workstation Attachment (#6142) feature.

A maximum of three workstation controllers is supported in the Expansion Unit feature (#7100/#7110) on the 9404 Models B20, C20, C25, D10, D20, and D25. One Twinaxial Workstation Controller (#6050/#6140) and one or two ASCII Workstation Controllers (#6141) may be installed concurrently. On the model D25 only, one or two Twinaxial Workstation Controllers and one, two or three ASCII controllers for a maximum of three controllers may be installed. In addition, each ASCII Workstation Controller may have the optional ASCII 12-port Workstation Attachment (#6142) feature.

Security Keylock

The 9404 has a security keylock to prevent unauthorized use of the system and unauthorized accessibility to data within the system.

Uninterruptible Power Supply (UPS) Interface

An interface is provided to attach a vendor-supplied UPS which provides the ability to tolerate a large range of power quality problems. Significant reduction in power requirements on the 9404 makes a UPS more cost effective.

Reliability, Availability and Serviceability (RAS)

Problem determination is accomplished through devices and features that, wherever possible, detect, isolate and report their own errors. For cases when automatic recovery or isolation is not possible, a process known as Problem Analysis and Resolution (PAR) is provided which includes extended diagnostics for isolating the failure to a part or list of parts. The failing unit may then be ordered and replaced on-site. The Analyze Problem command will allow the customer to define perceived problems not reported by the system.

When the failure has been analyzed and isolated to a single part or parts, the communications facilities of the electronic customer support can enable a direct link to IBM Service. This results in a service representative being dispatched with the appropriate part to resolve the problem.

9404 System Model Summary (C models)

 

                                              Model    Model    Model

                                               C10      C20      C25

                                              -----    -----    -----

Relative System                                1.3      1.8      2.2

  Performance

Main Storage

   Minimum (MB)                                  8        8        8

   Maximum (MB)                                 20       32       40

System I/O Bus                                   1      1-2      1-2

Card Slots                                       4        9        9

DASD Capacity

   Base (MB)                                   640      640      640

   Maximum (MB)                               2400     4800     6400

Communications Lines                           1-8     1-14     1-14

LAN Adapters                                   0-1      0-2      0-2

Workstation Controllers

  Minimum/Maximum                              1/3      1/6      1/6

Twinaxial Controllers                          0-1      0-2      0-2

Twinaxial Workstations                        1-40     1-80     1-80

ASCII Controllers                              0-2      0-4      0-4

ASCII Workstations                            1-36     1-72     1-72

1/4-inch Cartridge Tape                          1      1-2      1-2

1/2-inch Reel Tape                             0-1      0-1      0-1

1/2-inch Cartridge Tape                        0-1      0-1      0-1

8mm Cartridge Tape                             0-2      0-4      0-4

Diskette (8 or 5 1/4-inch)                     0-1      0-2      0-2

Tape Libraries                                 0-1      0-2      0-2

 

Notes:

·         The relative system performance ratios are estimated based on AS/400 environment, native RAMP-C workload, with a 9404 B10 with 16 MB of main storage and 945 MB of DASD equaling 1.0. The ratios shown were estimated at maximum configurations running at 70% utilization. Relative system performance ratios may not be realized in all environments.


Models

Model Summary Matrix

           Heading
             Main
Model      Storage     DASD
-----      -------    -------
 C10         8 MB      640 MB
 C20         8 MB      640 MB
 C25         8 MB      640 MB

 

Maximum

Maximum Communications Lines by Model

 

                                                     Max

                                                     2623

             Total   Total   Max T1/E1/J1 Lines (3)    +     Max other

             Comm    Hi Spd       <  or =            2666   High Speed

Model        Lines   Lines   384Kbps 512Kbps 640Kbps  (2)    Lines (1)

----------   -----   ------  ------- ------- ------- -----   --------

    C10        8       2        0       0       0      0         2

    C20/C25   14       2        0       0       0      0         2

 

Notes:

1. These are X.21/V.35/ISDN lines which support BSC, X.25,

   IDLC and SDLC at speeds greater than 19.2Kbps

   up through 64Kbps.  An ISDN adapter is

   counted as two lines when determining the number of lines supported.

2. This is the combined number of #2666 and #2623

   features supporting T1/E1/J1 speeds.

3. The Six-Line Communications Controller (#2623)

   supports up to three V.35 SDLC data lines for

   attachment to T1/E1/J1 facilities through appropriate

   Data Communications Equipment (DCE).

   Per controller (#2623) support:

    - One V.35 SDLC data line operating at speeds up to 640Kbps

    - Two V.35 SDLC data lines operating at speeds up to 512Kbps

    - Three V.35 SDLC data lines operating at speeds up to 384Kbps

 

Customer Setup (CSU)

Not available.

Devices Supported

4754 Security Interface Unit (SIU)

The 4754 Security Interface Unit (SIU) is an optional device that attaches to the Cryptographic Processor features #2620 or #2628. The 4754 provides the ability to communicate with the IBM Personal Security Card for highly secure importation of cryptographic keys into the Cryptographic Processor. The 4754 may also be used for initialization of the Cryptographic Processor. The 4754 SIU has tamper-resistant packaging. Three IBM Personal Security Cards are included with each 4754. The 4754 must be ordered separately from the Cryptographic Processor feature.

Software support for the 4754 is provided by OS/400 Version 2 Release 3 or later, and the IBM Common Cryptographic Architecture Security Services/400 PRPQ (P84224 (5799-FBR)).

Optical Libraries

3995 Optical Library Dataserver

The 3995 Optical Library Dataserver Models C40, C42, C44, C46 and C48, with direct attach capability, add a new level of price, capacity and performance to the existing storage hierarchy of magnetic disk, optical, and tape. The new models support 52GB, 135GB, 278GB, 405GB or 670GB of storage using the industry-standard 2.6GB multifunction optical drive. Model C44 can be upgraded to a Model C46.

The new LAN-attached Models C20, C22, C24, C26, and C28 support 52GB, 135GB, 278GB, 405GB, and 670GB of storage using the 2.6GB multifunction optical drive.

The 2.6GB drive has two-times the capacity of existing drives and supports both rewritable and WORM optical disks. This new drive also improves data transfer rate and reliability over the existing 1.3GB optical drives.

These new 3995 models are ideally suited for enabling applications to bring data currently stored on paper, microfiche, or microfilm on-line. You can also use the 3995 as a low-cost complement to high-performance magnetic disk to extend the online life of your data. The new libraries will automate optical disk handling using the latest technology with improvements in disk exchange time and reliability. The following OS/400 support is required:

·         For direct attached models (C40/C42/C44/C46/C48)

o        OS/400 V3R2 with PRPQ 5799-XBW S/C 3520, and 5755-AS3 with feature #1979

o        OS/400 V3R6 with 5755-AS4 and features #1980 and #1986

o        OS/400 V3R7 and later releases

Tape Units

3422 Magnetic Tape Subsystem (withdrawn from marketing)

The 3422 is a 1/2-inch reel-to-reel intermediate performance tape subsystem. The 3422 reads or writes data at 6,250 bpi at a nominal data rate of 780KB per second or 1,600 bpi at a nominal data rate of 200KB per second. It is a start/stop drive and is provided for alternate IPL, program distribution, and 1/2-inch reel tape interchange.

The 3422 consists of a Model A01 with a tape controller and one tape drive and a Model B01 with one tape drive and no controller. A maximum of three B01s can be attached to a Model A01 for a total of four drives per string. The 3422 attaches to the 9404 via the 3490 Magnetic Tape Subsystem Attachment (#2644).

The 3422 Tape drive supports 1.5 mil thick tape media up to a maximum of 2400 feet. Maximum: See the 9404 System Model Summary table.

3430 Magnetic Tape Subsystem (withdrawn from marketing)

The 3430 is a 1/2-inch reel-to-reel medium performance tape subsystem. The 3430 reads or writes data at 6,250 bpi at a nominal data rate of 312KB per second or 1,600 bpi at a nominal data rate of 80KB per second. It is a start/stop drive and is provided for alternate IPL, program distribution, and 1/2-inch reel tape interchange.

The 3430 consists of a Model A01 with a tape controller and one tape drive and a Model B01 with one tape drive and no controller. A maximum of three B01s can be attached to a Model A01 for a total of four drives per string. The 3430 attaches to the 9404 via the 3490 Magnetic Tape Subsystem Attachment (#2644).

The 3430 Tape drive supports 1.5 mil thick tape media up to a maximum of 2400 feet. Maximum: See the 9404 System Model Summary table.

3480 Magnetic Tape Subsystem

The 3480 is a 1/2-inch cartridge high performance tape subsystem with a capacity of up to 200MB per Cartridge System Tape. The 3480 reads and writes at an instantaneous data rate of 3MB per second. It is provided for program distribution, alternate IPL, save/restore, and 1/2-inch cartridge tape interchange. The Improved Data Recording Capability (IDRC) feature of the 3480, which is supported by OS/400 Version 2 Release 1, can increase the amount of data that can be stored on a cartridge by up to three times, depending on the data. The 3480 Magnetic Tape Subsystem provides concurrent operations when attached to more than one host system.

One 3480 A11 control unit and up to eight B11 tape drives or one A22 control unit and up to eight B22 tape drives attach to the 9404 via the 3490 Magnetic Tape Subsystem Attachment (feature #2622 available by RPQ 841975). the 3490 Magnetic Tape Subsystem Attachment/HP (#2644). OS/400 Version 2 Release 1.1 is required for feature #2644. Maximum: See the 9404 System Model Summary table.

3490/3490E Magnetic Tape Subsystem Models AXX-DXX

The 3490/3490E is a high performance 1/2-inch cartridge tape subsystem with a range of models that read and write at an instantaneous data rate of up to 3MB per second when attached with feature #2644. The 3490 models use the Cartridge System Tape media, providing up to 200 MB per cartridge. The 3490E models use either the Cartridge System Tape media with up to 400MB per cartridge or the Enhanced Capacity Cartridge System Tape media with up to 800MB per cartridge. The models are differentiated as follows:

The 3490 and 3490E models are provided for program distribution, alternate IPL, save/restore, and 1/2-inch cartridge tape interchange. The 3490 Magnetic Tape Subsystem provides concurrent operations when attached to more than one host system.

The 3490 and 3490E models are floor standing units except the 3490E C10, C11, and C22 which are functionally equivalent to the 3490E D41 and D42 but mount into a system rack. The C models must be installed in one of the following rack enclosures:

3490E feature #5037, Parallel Channel Attachment, is a prerequisite on Models C10, C11, and C22 for attachment to the AS400 Advanced Systems.

The Automatic Cartridge Loader (ACL) feature accepts six 1/2-inch tape cartridges, five in the ACL and one in the drive. It is standard on the BXX, C11 and C22 models, a feature on the DXX models and not supported on the C10.

The Improved Data Recording Capability (IDRC) can increase the amount of data that can be stored on a cartridge by up to three times, depending on the data. It is standard on the 3490E models and a feature on the 3490 models.

Maximum unattended save capacities per drive are as follows:

This results in up to 28.8GB unattended save capacity on a 3490E Model C22.

Following are the 3490 and 3490E Control Unit Models which attach to the above features:

The following models can attach to the 3490 A01 or A02 Control Unit Models:

The following models can attach to the 3490E A10 or A20 Control Unit Models:

The 3490 Magnetic Tape Subsystems can be shared between AS/400 systems, System/370 and System/390 as follows:

3490E Magnetic Tape Subsystem Models E01 and E11

The 3490E E01 and E11 models are media compatible with the current 3490E models, but offer a lower cost, smaller size, increased performance, and increased Cartridge Stack Loader (CSL) capacity. The new models include rack-mount and table-top versions, both with a seven cartridge CSL. Each model has an integrated control unit and one tape drive. Data compaction with Improved Data Recording Capability (IDRC) provides up to three times compaction. With IDRC, data transfer rates up to 4.9MB/sec are obtained. Unattended save capacity up to 16.8GB is provided. One or two 3490E E models are supported using #6501.

The 3490E EXX models cannot be shared between two systems, and distance from the system is limited to 82 feet (25 meters). The 3490E CXX models should be selected when system sharing is required, and/or distance up to 400 feet (121 meters) is required. Also, the 3490E EXX models cannot be migrated to the Magstar 3494 Tape Library Model L10, while the 3490E CXX models can.

Maximum: See AS/400 Model Summary tables.

3490E Tape Drive Models F00, F01 and F11

Model F00 is a single drive. Model F01 is floor-standing and the F11 is rack-mounted, both with a standard 10 cartridge autoloader. Each model reads and writes 36-track tape cartridges, and reads 18-track 1/2-inch tape cartridges. Native performance is 3MB/s. IDRC data compaction is provided. OS/400 V3R1, or later, is required.

Maximums: See AS/400 Model Summary tables.

Magstar 3494 Tape Library

The Magstar 3494 Tape Library Model L10 is stand-alone, automated tape-storage subsystem designed to provide unattended tape operation.

The 3494 Tape Library Dataserver Models L12 and L14 offer the high reliability and high availability features of the Model L10 with the added support of the 3590 High Performance Tape Subsystem Model B1A. This allows customers to automate tape data handling with the latest technology. The ability to support the 3490E and 3590 technology in the same library offers customers a fast and convenient way to manage these tape medias.

Using Backup Recovery and Media Services/400 (5763-BR1) Version 3 Release 1 or later, the 3494 provides automated system backup and recovery. Use of this product along with an IBM Services Offering is optional, but recommended.

3494 Highlights:

The 3490E-CXA and 3590-B1A tape drives within the library attach to the AS/400 in the same way as the 3490E-CXX and 3490 B1A tape drives. On the AS/400, one EIA 232/V.24 Line Adapter or a LAN attachment is required for each 3494 Tape Library.

Maximums: See AS/400 Model Summary tables.

3590 High Performance Tape Subsystem

The 3590 is a new automated tape subsystem for the AS/400, reaching higher levels of reliability, capacity and performance. The drive rate of 9 MB per second is three times faster than previous IBM 3480, 3490 or 3490E tape drives, allowing tape applications to read and write data more quickly. Using the built-in data compression capability, the 3590 has a potential maximum throughput of 20 MB per second. Actual throughput is a function of end-to-end system capabilities including processor, DASD, bus, IOP, OS/400 blocking and data compaction.

The 3590 uses new read/write and media technology for vastly increased capacity and reliability. The new cartridge has an uncompacted data capacity of 10 GB, or typically over 30 GB assuming a 3:1 compaction ratio. The capacity of an individual drive has further been increased by the addition of the Automatic Cartridge Facility (ACF), which allows an operator to mount ten cartridges at a time via a magazine. Thus an individual drive can provide storage for 100 to 300 GB of data. The 3590 cannot read or write 3490E tape cartridges.

The 3590 is available in two models. The Model B11 is rack mounted and includes a 10-cartridge Automatic Cartridge Facility (ACF) that can be used in random access mode as a mini-library. The Model B1A does not include the ACF and is designed to fit into the 3494 Tape Library Dataserver, increasing total library capacity to over 90 terabytes.

The 3590 attaches to all AS/400 DXX and later models, except the X02 and P03 models, using AS/400 Feature #6501 (Magnetic Media Subsystem Controller). Each feature #6501 can support up to two tape drives. The 3490 has two SCSI ports and can be shared between two systems.

Backup Recovery and Media Services/400 (BRMS/400) is recommended to support automation in tape handling, media management, fast search, and automatic migration of data between tape and DASD based on user defined policies. For developing unique applications, OS/400 provides a command interface.

7208 8-mm External Tape Drives

The 7208 is an 8-mm helical scan, medium performance, high capacity, streaming tape drive with models supporting media capacity of up to 7.0GB per cartridge. The Model 2 (Withdrawn from marketing) provides 2.3GB capacity. When hardware data compression (HDC) on the IOP is enabled, it typically provides 1.5 times improvement in capacity and transfer rate. The 7208 Model 12 provides 5GB capacity and the Model 222 provides 7GB. Both Models 12 and 222 support an implementation of IBM's Improved Data Recording Capability (IDRC) that typically provides a two times improvement in capacity and transfer rate.

Both 7208 models are stand-alone, table-top devices, and can be used for save/restore, alternate IPL, program interchange and 8mm cartridge tape interchange with other AS/400 systems. Kits for rack-mounting are available via RPQ 841997 for the Model 2 and RPQ 841998 for the Model 12. The 7208 attaches to the AS/400 via Removable Media Device Attachment Feature (#2621). This feature supports up to two tape devices.

Full interchange of data is supported between Models 002, 012 and 222, the 9427 and the AS/400 Advanced Series internal 7GB 8mm tape units, using the proper tape density and 7208-002/012/222 tape media. All models use the same media and cleaning cartridges. The Models 002, 012 and 222 do NOT support data interchange with the 7208 Model 1 or Model 11 attached to RS/6000 systems.

The Model 2 has an instantaneous data transfer rate of 245KBps second. When HDC is enabled the unattended save rate would typically be 1GB/Hr with 3.5GB of data stored per cartridge. The Model 12 has an instantaneous data transfer rate of 500KBps. When IDRC is enabled the unattended save rate would typically be 3GB/Hr with 10GB of data stored per cartridge. The Model 222 has a sustained data transfer rate of 500KBps. Using IDRC, maximum effective data transfer rate is up to 1MBps, and capacity is up to 14GB of data stored per cartridge, depending on the type of data.

Attaches to all AS/400 Advanced Series models. Model 222 requires the support of OS/400 Version 3 Release 1. Maximums: See System Unit Summary table.

9348 Model 2 Magnetic Tape Unit

The 9348 Model 2 is a free standing table top, streaming 1/2-inch reel-to-reel tape drive. It is provided for save/restore, program distribution and 1/2-inch reel tape interchange. The 9348 Model 2 can be used for alternate IPL when attached to 9404 Models D25, E10, E20, E25, F10, F20, and F25.

The 9348 is a dual density 1,600/6250 bpi drive with an instantaneous data rate of 200KB per second at 1,600 bpi and 781KB per second at 6,250 bpi.

The 9348 Model 2 attaches to the 9404 via the following features:

The 9348 Model 2 Magnetic Tape Unit includes an attachment cable and terminator. Specify cable length as follows:

9427 8mm Tape Cartridge Library Models 210 and 211

The 9427 Models 210 and 211 are automated tape libraries supported on all AS/400 D, E and F models (except Models D02 and E02), and on all AS/400 Advanced Series models. The 9427-210 is a stand-alone unit, and the 9427-211 is a rack-mounted unit that requires 14 EIA units and 1/2 of the horizontal rack space. Two Model 211 units can be placed in a rack, side-by-side. Each 9427 supports one or two 7GB 8mm tape drives. Up to twenty tape cartridges are supported. Optional features to support dual host channels, tape mirroring for fault tolerance, off-line host independent functions (tape copy and compare), and a label printer port will be available. Device performance is 1.5MB/sec. The 9427 is available in black or white.

Tape cartridge capacity is 7GB and sustained data transfer rate is 500KBps. Using Improved Data Recording Capability (IDRC), maximum tape cartridge capacity is up to 14GB, and effective data transfer rate is up to 1MBps, depending on the type of data. Total 9427 capacity is up to 280GB.

The 9427 can be used for save/restore, alternate IPL (except on Models D04, D06, D10 and D20), program distribution, migration, data interchange, automatic migration of data between DASD and tape, and mass storage for data archive. Full interchange of data is supported with the 7208-002, 7208-012 and 7208-232 tape drives, and the AS/400 Advanced Series internal 7GB 8mm tape units, using the proper tape density and 7208-002/012 tape media.

Media is handled in two, ten-cartridge magazines, which can easily be added to or removed from the tape library. Each library has a bar-code reader used to inventory the library contents, and a display on the front panel that is used for status and error codes. Keys located next to the display are used for selecting operating options. The 9427 has a front door of clear plastic so that the robotics, drives and cartridge tapes can be seen while in operation. The door has a key-lock for security.

Neither the 7GB 8mm Cartridge Tape unit located in the AS/400 system unit, nor the 7208-222, can be migrated to a 9427.

The 9427 is attached to the AS/400 via the Removable Media Device Attachment (#2621), with a maximum of one 9427 per #2621. The Removable Media Device Attachment (#2621) has two SCSI ports. The 9427 can attach to the #2621 using one or two ports (two ports are required for maximum performance of the 9427). If the 9427 is attached using only one SCSI port, then the other SCSI port can be used to attach other devices. A feature is available to support attachment to two systems with random access to cartridges, tape mirroring, offline tape copy and compare, and a label printer port.

Support for the 9427 is provided by OS/400 Version 3 Release 1. Backup, Recovery and Media Services/400 (5763-BR1) is recommended to support automation in tape handling, media management, and automatic migration of data between tape and DASD based on user defined policies. For those developing unique library applications, OS/400 provides a library command interface.

Remote Workstation Controllers

5251 Model 12

The 5251 Model 12 may be used to attach remote workstations. It is a workstation controller and communications unit for remote attachment of multiple display stations and printers. PC Support access by Personal Computers and Personal System/2s attached to the 5251 Model 12 will not be supported.

Note: Remote workstation controllers attach to the AS/400 via the communications subsystem features. The 5294 or the 5394 running in 5294 emulation mode, will not give IBM Personal Computers or Personal System/2s access to IBM PC Support/400.

5294

The 5294 Remote Control Unit can be used to attach up to eight 5250 type displays, printers, IBM Personal Computers and Personal System/2s, and Personal System/55 (AP only), to an AS/400 via a communications link. The function provided will be equivalent to that available on the System/36 and System/38 with the exception that PC Support access by Personal Computers and Personal System/2s attached to the 5294 will not be supported.

5394

The 5394 Remote Control Unit attaches up to sixteen 5250 type displays, printers, IBM Personal Computers and Personal System/2s, and Personal System/55 (AP only) to an AS/400 via a communications link. The function provided will be similar to that provided to the local workstations via the #6140 or #6040 local twinaxial workstation controllers.

5494 Remote Control Unit

The 5494 Remote Control Unit manages the operation of workstations and workstation communications to the AS/400. The IBM 5494-EXT replaces the IBM 5494-001 and the IBM 5494-002. The 5494 now has only one model, to which features are added customizing the 5494 for operational needs.

The 5494-EXT supports the attachment of up to 28 twinaxial devices. With the 5494 Twinaxial Expansion Kit installed, up to 56 twinaxial devices can communicate to the AS/400 through a Type 2.1 connection.

By installing the 5494 Token-Ring Adapter, the 5494-EXT has all the functional capabilities of the withdrawn 5494-002. It can communicate with an AS/400 system over a Token-Ring network while supporting up to 28 twinaxial devices, or can support Token-Ring attached devices while communicating with an AS/400 over an SDLC, X.21, or X.25 connection. In this configuration, the 5494 supports up to 80 devices of which up to 28 could be twinaxial attached and the rest Token-Ring attached.

The Ethernet Adapter supports IEEE 802.2 logical link control and IEEE 802.3 or DIX Version 2.0 frame format using a 10BASE2 (BNC), a 10BASE5 (15-pin D-SUB), or a 10BASE-T (RJ-45) connector. The 5494 Ethernet AUI Cable allows the attachment to an Ethernet Network using thick coaxial (10BASE5) cabling. Ethernet support allows the 5494 to be used as a gateway to an Ethernet LAN or attach to an AS/400 System via an Ethernet Network.

The 5494 Utility Program allows the selection of Concurrent Diagnostics, configuration information, or to reset and restart the 5494 Remote Control Unit from a remote Programmable Workstation (PWS). The PWS no longer needs to be directly attached to a 5494 to provide access to remote 5494's from a central site.

The IBM 5494 Release 3.0 microcode supports all the functions of the IBM 5494 Release 2.0 microcode and the following enhancements:

·         Support of OS/400 Version 3 Release 1.

Multiconnectors

5299 Multiconnector and TTPA Adapter

The 5299 Multiconnector and Twinaxial to Telephone Twisted Pair Adapter (TTPA) may be used with appropriate telephone wiring. Initial and ongoing site cabling costs may be reduced with this wiring option.

Workstation Support

Twinaxial Displays

The following displays are supported by the Twinaxial Workstation Controller (#6140, #6040, and #6050):

ASCII Displays

The following ASCII displays, are supported by the ASCII Workstation Controller (#6141 and #6041):

The 3151, 316X, or equivalent attached to the ASCII Workstation Controller are supported as the AS/400 system console. See the "ASCII Workstation Reference and Example" manual SA41-9922, for specific configuration information.

The following non-IBM displays have been tested and found to work with the ASCII Workstation Controller:

·         TeleVideo 910, 925, 955 (2)

LAN Attached Displays

6250 X Terminal Family

The IBM 6250 X Terminal offers high-performance, local-area network (LAN)-attached X terminals that provide a low-cost, desk-top platform for connectivity to the AS/400 and UNIX based host platforms (such as the RS/6000*. The 6250 X Terminal supports multiple 5250 emulation sessions to one or more AS/400s using an X Windows interface. The X terminal can also access UNIX host applications using either the memory efficient 6250 Window manger or the industry standard Motif** Window Manager. Either window manager provides a superb graphics platform for applications in the X Window environment.

The 6250 X Terminal Family includes four models...color and monochrome Ethernet models and color and monochrome Token-Ring models. They come with a base of 4MB of memory, expandable to 20MB or 16MB, depending on the model. The displays both have a resolution of 1024X768 and the color models support 256 colors.

The 6250 X Terminal requires one AS/400 on the LAN to have the IBM 6250 X Terminal Program for OS/400 (PRPQ 5799-QGP) installed. The X terminal down-loads the X window environment from the AS/400 and then can communicate with other hosts on the LAN.

The X terminals include an integrated, swivel display, keyboard, three button mouse and license to use the 6250 program. The X terminals have an easy to use setup menu for initial configuration and standard LAN connectors for the most popular Ethernet or Token-Ring connections.

IBM Personal Computer Support

The AS/400 supports the IBM Personal Computer, Models 5150, 5160, 5162 and 5170, as described in programming announcement letters dated February 3, 1987 and January 26, 1988.

Personal System/2 Support

The AS/400 supports the IBM Personal System/2 models and the IBM Personal Typing System. For information regarding attachment of specific Personal System/2 models refer to the model Sales Manual description under "List of Supported Products" for AS/400 attachment hardware and under "IBM Software Compatibility" for supported AS/400 software.

The IBM Personal Computer and the Personal System/2, when attached to the Twinaxial Workstation Controller, are supported for use as a system console and specific IBM Personal Computer printers are supported as system printers.

Printer Support

Twinaxial Printers

The following printers are supported by the Twinaxial Workstation Controller. Those which are DBCS (Double Byte Character Set) font capable are listed in the subsequent section.

Laser Printers
(Includes all electrophotographic print technologies)
 
Device            Max.
 Type  Model     Speed   Datastream      Forms
------ -----    -------  ----------     --------
 3812   001*    12 ppm    SCS,IPDS        Cut
        002*    12 ppm    SCS,IPDS        Cut
 3816   01S*    16 ppm    SCS,IPDS        Cut
        01D*    16 ppm    SCS,IPDS        Cut
 3912   AS0     12 ppm    SCS             Cut
        AS1     12 ppm    SCS,IPDS        Cut
 3916   AS0     16 ppm    SCS             Cut
        AS1     16 ppm    SCS,IPDS        Cut
 3930   02S     30 ppm        IPDS        Cut
        02D     30 ppm        IPDS        Cut
 3935   001     35 ppm        IPDS        Cut
 4028   AS1     10 ppm        IPDS        Cut

 

* Withdrawn from marketing

Impact Printers
 
Device            Max.
 Type  Model     Speed   Datastream   Forms
------ -----    -------  ----------  --------
 4210   001*    200 cps   SCS        Cont
 4214   002*    200 cps   SCS        Cont
 4224   101     200 cps       IPDS   Cont
        102     400 cps       IPDS   Cont
        1C2     400 cps       IPDS   Cont
        1E2     400 cps       IPDS   Cont
        1E3     600 cps       IPDS   Cont
 4230   101     375 cps   SCS        Cont/Cut
        1S2     480 cps   SCS        Cont/Cut
        4S3     600 cps   SCS        Cont/Cut
        1I1     375 cps       IPDS   Cont/Cut
        102     480 cps       IPDS   Cont/Cut
        4I3     600 cps       IPDS   Cont/Cut
 4234   002*    410 lpm   SCS        Cont
        008*    410 lpm       IPDS   Cont
        012*    800 lpm       IPDS   Cont
 4245   T12*   1200 lpm   SCS        Cont
        T20*   2000 lpm   SCS        Cont
 4247   001     700 cps   SCS        Cont/Cut
 4247   001     700 cps       IPDS   Cont/Cut
 4247   002     400 cps   SCS        Cont/Cut
 4247   002     400 cps       IPDS   Cont/Cut
 5219   D01*     40 cps   SCS        Cont/Cut
        D02*     60 cps   SCS        Cont/Cut
 5224   001*    140 lpm   SCS        Cont
        002*    240 lpm   SCS        Cont
 5225   001*    280 lpm   SCS        Cont
        002*    400 lpm   SCS        Cont
        003*    490 lpm   SCS        Cont
        004*    560 lpm   SCS        Cont
 5256   001*     40 cps   SCS        Cont
        002*     80 cps   SCS        Cont
        003*    120 cps   SCS        Cont
 5262   001*    650 lpm   SCS        Cont
 6252   T08     800 lpm   SCS        Cont
        T12    1200 lpm   SCS        Cont
 6262   T12    1200 lpm   SCS        Cont
        T14    1400 lpm   SCS        Cont
        T22    2200 lpm   SCS        Cont
 6400   All
        Models            SCS,IPDS   Cont
 6408   CT0     800 lpm   SCS        Cont
        CTA     800 lpm   SCS,IPDS   Cont
 6412   CT0    1200 lpm   SCS        Cont
        CTA    1200 lpm   SCS,IPDS   Cont

 

* Withdrawn from marketing

Key to Abbreviations

·         Maximum Speed

cps

characters per second

lpm

lines per minute

ppm

SCS

SNA Character Set

IPDS

Intelligent Printer Data Stream

Cut

Cut-sheet forms

Cont

Continuous forms

DBCS Printers

The following printers support DBCS (Double Byte Character Set) fonts:

Twinaxial Attached

IBM Personal Printers

The following IBM Personal Printers are supported by the attachments indicated in the following table. Refer to "Attaching IBM Personal Printers to IBM Systems" (S544-4209) for attachment information. Also refer to the specific emulator product documentation for attachment information.

                            Device              Attachment
        Printer              Type   Model          Keys
        -------             ------  -----   -------------------
 IBM Personal Series II/Plus 2380     -    1 2 3 4 5 6 7 8 12
 IBM Personal Series II/Plus 2381     -    1 2 3 4 5 6 7 8 12
 IBM Personal Series II/Plus 2390     -    1 2 3 4 5 6 7 8 12
 IBM Personal Series II/Plus 2391     -    1 2 3 4 5 6 7 8 12
 IBM 3812 Pageprinter        3812     1    2 3 6 7 12
 IBM 3812 Pageprinter        3812     2    2 3 6 7 12
 IBM 3816 Pageprinter        3816    01S   2 3
 IBM 3816 Pageprinter        3816    01D   2 3
 IBM 3912 Page Printer       3912    AS0   2 3 4 7 12
 IBM 3912 Page Printer       3912    AS1   2 3 4 7 12
 IBM 3916 Page Printer       3916    AS0   2 3 4 7 12
 IBM 3916 Page Printer       3916    AS1   2 3 4 7 12
 IBM 3930 Printer            3930    03S   1 2 3 12
 IBM 3930 Printer            3930    03D   1 2 3 12
 IBM LaserPrinter            4019     1    1 2 3 4 5 6 7 8 12
 IBM LaserPrinter E          4019    E01   1 2 3 4 5 6 7 8 12
 IBM LaserPrinter 5E         4029    10    1 2 3 4 5 6 7 8 12
 IBM LaserPrinter 6          4029    20    1 2 3 4 5 6 7 8 12
 IBM LaserPrinter 10         4029    30    1 2 3 4 5 6 7 8 12
 IBM LaserPrinter 10E        4029    40    1 2 3 4 5 6 7 8 12
 IBM 4037 5E Printer         4037     -    1 2 3 4 7 10 11 12
 IBM LaserPrinter            4039    10R   2 3 4 7 12
 IBM LaserPrinter            4039    12R   2 3 4 7 12
 IBM LaserPrinter            4039    12L   2 3 4 7 12
 IBM LaserPrinter            4039    16L   2 3 4 7 12
 IBM 4070 Printer            4070     -    1 2 3 4 5 6 7 8 12
 IBM ExecJet                 4072     -    1 2 3 4 5 6 7 8 12
 IBM ExecJet II              4076     -    1 2 3 4 7 10 11 12
 IBM Proprinter              4201     1    2 3 4 5 6 7 8 9 12
 IBM Proprinter II           4201     2    1 2 3 4 5 6 7 8 9 12
 IBM Proprinter III          4201     3    1 2 3 4 5 6 7 8 9 12
 IBM Proprinter XL           4202     1    1 2 3 4 5 6 7 8 9 12
 IBM Proprinter II XL        4202     2    1 2 3 4 5 6 7 8 9 12
 IBM Proprinter III XL       4202     3    1 2 3 4 5 6 7 8 9 12
 IBM Proprinter X24          4207     1    1 2 3 6 7 8 9 12
 IBM Proprinter X24E         4207     2    1 2 3 4 5 6 7 8 9 12
 IBM Proprinter XL24         4208     1    1 2 3 6 7 8 9 12
 IBM Proprinter XL24E        4208     2    1 2 3 4 5 6 7 8 9 12
 IBM Proprinter 24P          4212     -    2 3 4 5 6 7 8 12
 IBM Personal Pageprinter    4216    10    1 2 3 4 5 6 12
 IBM 4224 Printer            4224    301   1 12
 IBM 4224 Printer            4224    302   1 12
 IBM 4224 Printer            4224    3E3   1 12
 IBM 4226 Printer            4226    302   1 2 3 4 5 6 7 12
 IBM 4230 Printer            4232    4S3   1 2 3 4 5 12
 IBM 4230 Printer            4232    4I3   1 2 3 4 5 12
 IBM 4232 Printer            4232    302   1 2 3 4 5 12
 IBM 4234 Printer            4234     9    1 12
 IBM 4234 Printer            4234    13    1 12
 IBM 4770 Ink Jet Printer    4770     -    12
 IBM Quietwriter             5201     1    2 3 4 5 6 7 8 12
 IBM Quietwriter             5201     2    2 3 4 5 6 7 8 9 12
 IBM Quietwriter III         5202     -    2 3 4 5 6 7 8 9 12
 IBM Quickwriter             5204     -    1 2 3 4 5 6 7 8 9 12
 IBM Serial Matrix Printer   4247    A00
 IBM Impactwriter            6252    AS8     1 9 12
 IBM Impactwriter            6252    AS2     1 9 12
 IBM 6400 Printer            6400 All Models 1 2 3 12
 IBM 6408 Printer            6408    A00     1 2 3 12
 IBM 6408 Printer            6408    CTA     1 2 3 12
 IBM 6412 Printer            6412    A00     1 2 3 12
 IBM 6412 Printer            6412    CTA     1 2 3 12

 

Attachment Keys:

1.       Attachment via the AS/400 ASCII Workstation Controller

2.       Attachment via a PC or PS/2 utilizing AS/400 PC Support Workstation Function (DOS)

3.       Attachment via a PC or PS/2 utilizing IBM OS/2 Extended Edition Version 1.3, or later

4.       Attachment via the 3477 InfoWindow display or 3486/3487/3488 InfoWindow II displays

5.       Attachment via the 3197 Display station

6.       Attachment via a PS/2 utilizing the S36/38 Workstation Emulation Program

7.       Attachment via a PC or PS/2 utilizing the Enhanced 5250 Emulation Program

8.       Attachment via a PC or PS/2 utilizing the Remote 5250 Emulation Program

9.       Attachment via the 5208 Model 1 ASCII-5250 Link Protocol Converter

10.    Attachment via Rumba/400

11.    Attachment via IBM OS/2 Communications Manager/2

12.    Attachment via OS/400 Host Print Transform function

Non-IBM Personal Printers

The following Non-IBM Personal Printers are supported by the attachments indicated in the following table. Refer to "Attaching IBM Personal Printers to IBM Systems" (S544-4209) for attachment information. Also refer to the specific emulator product documentation for attachment information.

                                          Attachment
        Printer                              Keys
        -------                           ----------
 COMPAQ PageMark 15                        2 12
 COMPAQ PageMark 20                        2 12
 HP DeskJet 500                            2 12
 HP DeskJet 520                            12
 HP DeskJet 550C                           2 12
 HP DeskJet 560C                           12
 HP LaserJet Series II                     2 12
 HP LaserJet IID                           2 12
 HP LaserJet IIP                           2 12
 HP LaserJet III                           2 12
 HP LaserJet IIID                          2 12
 HP LaserJet IIIP                          2 12
 HP LaserJet IIISi                         2 12
 HP LaserJet 4                             12
 HP PaintJet                               12
 HP PaintJet XL                            12
 HP PaintJet XL300                         12
 Epson ActionPrinter 2250                  2 12
 Epson ActionPrinter 3250                  2 12
 Epson ActionPrinter 5000                  2 12
 Epson ActionPrinter 5500                  2 12
 Epson DFX-5000                            2 12
 Epson DFX-8000                            2 12
 Epson EPL-7000                            2 12
 Epson EPL-8000                            2 12
 Epson FX-850                              2 12
 Epson FX-870                              2 12
 Epson FX-1170                             2 12
 Epson LQ-510                              2 12
 Epson LQ-570                              2 12
 Epson LQ-860                              2 12
 Epson LQ-870                              2 12
 Epson LQ-1070                             2 12
 Epson LQ-1170                             2 12
 Epson LQ-2550                             2 12
 Epson LX-810                              2 12
 Epson SQ-870                              2 12
 Epson SQ-1170                             2 12
 NEC P2 Pinwriter                          2 12
 NEC P2200 Pinwriter                       2 12
 NEC P2200 XE Pinwriter                    2 12
 NEC P5200 Pinwriter                       2 12
 NEC P5300 Pinwriter                       2 12
 NEC P6200 Pinwriter                       2 12
 NEC P6300 Pinwriter                       2 12
 Okidata Microline 184 Turbo               2 12
 Okidata Microline 320                     2 12
 Okidata Microline 321                     2 12
 Okidata Microline 390 Plus                2 12
 Okidata Microline 391 Plus                2 12
 Okidata Microline 393 Plus                2 12
 Okidata Microline 590                     2 12
 Okidata Microline 591                     2 12
 Okidata OL400 LED Page Printer            2 12
 Okidata OL800 LED Page Printer            2 12
 Okidata OL810 LED Page Printer            2 12
 Okidata OL820 LED Page Printer            2 12
 Okidata Pacemark 3410                     2 12
 Panasonic KX-P1123                        2 12
 Panasonic KX-P1124                        2 12
 Panasonic KX-P1124i                       2 12
 Panasonic KX-P1180                        2 12
 Panasonic KX-P1180i                       2 12
 Panasonic KX-P1191                        2 12
 Panasonic KX-P1624                        2 12
 Panasonic KX-P1654                        2 12
 Panasonic KX-P1695                        2 12
 Panasonic KX-P2123                        2 12
 Panasonic KX-P2124                        2 12
 Panasonic KX-P2180                        2 12
 Panasonic KX-P2624                        2 12
 Panasonic KX-P4410                        2 12
 Panasonic KX-P4420                        2 12
 Panasonic KX-P4430                        2 12
 Panasonic KX-P4450i                       2 12
 Panasonic KX-P4451                        2 12
 Xerox 4215/MRP                            12
 Xerox 4219/MRP                            12
 Xerox 4220/MRP                            12
 Xerox 4235 Laser Printer                  12
 Xerox 4700 II Color Document Printer      12

 

Attachment Keys:

1.       Attachment via the AS/400 ASCII Workstation Controller

2.       Attachment via a PC or PS/2 utilizing AS/400 PC Support Workstation Function (DOS)

3.       Attachment via a PC or PS/2 utilizing IBM OS/2 Extended Edition Version 1.3, or later

4.       Attachment via the 3477 InfoWindow display or 3486/3487/3488 InfoWindow II displays

5.       Attachment via the 3197 Display station

6.       Attachment via a PS/2 utilizing the S36/38 Workstation Emulation Program

7.       Attachment via a PC or PS/2 utilizing the Enhanced 5250 Emulation Program

8.       Attachment via a PC or PS/2 utilizing the Remote 5250 Emulation Program

9.       Attachment via the 5208 Model 1 ASCII-5250 Link Protocol Converter

10.    Attachment via Rumba/400

11.    Attachment via IBM OS/2 Communications Manager/2

12.    Attachment via OS/400 Host Print Transform function

LAN-attached ASCII Printers

IBM and non-IBM ASCII printers can be attached directly to the AS/400 via a LAN connection using the IBM 4033 LAN connection product. Ethernet and Token-ring connections are supported. The ASCII printers that are supported thru this attachment method are the same printers supported using the OS/400 Host Print Transform function. Refer to the previous charts for a list of IBM and non-IBM ASCII printers supported with the Host Print Transform function.

The IBM 4039 LaserPrinter can also be attached directly to the AS/400 via a LAN network connection using the 4039 integrated network adapter option.

LAN-attached IPDS Printers

The following AFP-capable IBM Page Printers are supported on Token-Ring and SDLC as specified. The Print Services Facility/400 (PSF/400) feature of OS/400 Version 3 Release 1 is required for the attachment of these printers.

 

  Device

  Type      Model   Speed    Attachment

  ------    -----   -----    ----------

  3935         1    35PPM   Token-Ring, SDLC

 

The following IBM Page Printers are supported on Token-Ring (using Remote Print Manager or PSF/2 Version 1.10 or later) and SDLC as specified:

  Device
  Type      Model   Speed    Attachment
  ------    -----   -----    ----------
  3820         1*   20PPM    Token-Ring, SDLC
  3825         1    58PPM    Token-Ring
  3827         1    92PPM    Token-Ring
  3828         1    92PPM    Token-Ring
  3829         1    91PPM    Token-Ring
  3835         1    88PPM    Token-Ring
  3835         2    91PPM    Token-Ring
  3900         1   229PPM    Token-Ring
  3900       DUP   300PPM    Token-Ring

 

* Withdrawn from marketing

Ordering Information

The following products are required for printer attachment using Remote Print Manager or PSF/2 Version 1.1 or later.

Hardware

1.       PS/2 or IBM PC AT

2.        

3.       IBM Personal System/2* Model 30-021 or Model 30-E21

4.        

5.       Memory           640KB

6.       Storage          IBM 20MB Fixed Disk

7.       Diskette Drive   One double-sided 3 1/2 inch 720KB

8.       Keyboard         Enhanced Personal Computer Keyboard

9.       Display          Monochrome or color display (80 column)

10.    

11.   or

12.    

13.   IBM Personal Computer AT*

14.    

15.   Memory           640KB

16.   Storage          IBM 20MB Fixed Disk

17.   Diskette Drive   One high-density 5 1/4 inch 1.2MB

18.   Keyboard         Either an Enhanced Personal Computer Keyboard

19.                     or a Personal Computer AT Keyboard

20.   Display          Monochrome or color display (80 column)

21.    

22.    IBM 4Mbps Token-Ring Network Subsystem Feature or IBM 16/4Mbps Token-Ring Network Subsystem Feature

23.    8228 Multistation Access Unit

24.    Token-Ring PC Cable (#3390 for machine 8530)

25.    Token-Ring PC Network Adapter II (#9858 for machine 8530)

26.    IBM S/370 Channel Emulator Card and Cable (#3200 for machine 8530)

27.    IBM S/370 Channel Terminators: Bus, P/N 2282675; Tag, P/N 2282676

28.    The IBM 3820 Printer requires the 3820 S/370 Interface Attachment (#3055)

Software

1.       DOS Version 3.3 or subsequent releases

2.       IBM Personal Computer APPC/PC, Version 1.11 (Program #75X1047), with most current PTFs applied or subsequent releases

3.       Token-Ring Network PC Adapter Support Interface (provided on the Network PC Adapter II card), or Local Area Network Support Program V1.1 (Program #93X5683)

4.       Remote PrintManager Version 2.0.3 (Program #25F5944)

Miscellaneous Devices

2480 AS/400 Wireless Access Point

These compact, lightweight devices act as either wireless LAN bridges or wireless LAN repeaters which support transparent roaming through a multi-cell network. Two models of the AS/400 Wireless Access Point are supported:

·         2480 Model RS0, AS/400 Wireless RS-485 LAN Access Point. This device is used with the AS/400 Wireless LAN Adapter to create a multi-cell wireless network. These access points may connect to the AS/400 Wireless LAN Adapter through an RS-485 twisted-pair wired backbone or wirelessly using the RF network. The 2480 Model RS0 is supported on AS/400 Advanced Systems with an AS/400 Wireless LAN Adapter (#2668)

4754 Security Interface Unit (SIU)

The 4754 Security Interface Unit (SIU) is an optional device that attaches to the Cryptographic Processor features #2620 or #2628. The 4754 provides the ability to communicate with the IBM Personal Security Card for highly secure importation of cryptographic keys into the Cryptographic Processor. The 4754 may also be used for initialization of the Cryptographic Processor. The 4754 SIU has tamper-resistant packaging. Three IBM Personal Security Cards are included with each 4754. The 4754 must be ordered separately from the Cryptographic Processor feature.

Software support for the 4754 is provided by OS/400 Version 3 Release 1 or later, and the IBM Common Cryptographic Architecture Security Services/400 PRPQ (5799-XBY).

5159 Programmable I/O Controller

The 5159 Programmable I/O Controller is an asynchronous communication controller that performs computer processing and data transfer between an AS/400 and downstream asynchronous devices. These devices include but are not limited to time clocks, scales, badge readers, scanners, robots, bar code readers. The 5159 attaches locally to any AS/400 communication port configured for asynchronous communications. The asynchronous devices may attach locally or remotely under the control of user programs. Remote devices may require the use of asynchronous modems to connect to the 5159.

5259 Migration Data Link (Withdrawn from Marketing)

The 5259 Migration Data Link is a stand-alone device that offers a cabled data path between the IBM System/36 or System/38 and the IBM AS/400 system. Systems are connected through their respective workstation controllers.

The Migration Data Link, together with programming support provided by the IBM AS/400 System/36 Migration Aid (5727-MG1) or the IBM AS/400 System/38 Migration Aid (5714-MG1) and the IBM Operating System/400 Version 3 Release 0.5 or later, provides for data send/receive functions between systems. In addition, the Migration Data Link provides access between systems by providing hot key availability from up to seven workstations per Migration Data Link.

System/36 and System/38 Devices Not Supported by the AS/400

Note 1: RPQs are available to convert models 012 and 020 to models T12 and T20 which are supported by 9402.

Model Conversions

None for the C models.

National Language Support

Keyboard Support

The 5250-style keyboards supported by the System/36 and System/38 are also supported by the Twinaxial Workstation Controller. Countries that are not listed below do not have a country-unique keyboard that is supported by the local workstation controller. The Twinaxial Work Station Controller will support the following keyboard IDs:

 

                    122         IBM

                 Typewriter   Enhanced

 

Country/Language    (1A)        (G)

 

Arabic X/Basic      239         239

Austria/Germany     265         129*

Belgium             269         120*

Canadian/French     277         058*

Cyrillic            241         241

Denmark             281         159*

Finland/Sweden      285         153*

France              251         120*

Greece              218         218

Hebrew              210         113

Iceland             197         197

Italy               293         142*

Japan

 (Katakana/Kanji)   694R        694R

Latin America       170         171*

Latin 2             114         114

Netherlands         101         143

Norway              281N        155*

Portugal            301         163*

Spain               172         173*

Switzerland/French  714F        150F*

Switzerland/

 German and Italian 714G        150G*

Thailand            ---         190

Turkey              402         179

United Kingdom      313         168*

United States       101         101G*

Yugoslavia          234         234

 

The 122 Typewriter Keyboard is supported on the 3179, 3180, 3196 and 3197 Display Stations. The IBM Enhanced Keyboard is supported on the 3179 (US only), 3196, and 3197 Display Stations.

* The indicated IBM Enhanced Keyboards are emulated by the ASCII Workstation Controller.

Code Page Support

The Twinaxial and ASCII Workstation Controller will support the following code pages and character sets:

 

Country/       EBCDIC      EBCDIC   ASCII

 Language       Code      Character Code

                Page         Set    Page***

 

Arabic X/Basic  420          235    ---

Austria/Germany 273, 500     697    819*, **

Belgium         500          697    819

Canadian/French 500, 260     697    819*, **

Chinese

 Simplified     037          697    ---

Chinese

 Traditional    037          697    ---

Cyrillic        880          960    ---

Denmark         277, 500     697    819

Finland/Sweden  278, 500     697    819

France          297, 500     697    819*, **

Greece          423          218    ---

Hebrew          424/2        941/2  ---

Iceland         871, 500     697    ---

International   500          697    ---

Italy           280, 500     697    819*, **

Japan English   281, 500     ---    ---

 Katakana/Kanji 290          ---    ---

Korea           037          697    ---

Latin America   284, 500     697    819*

Netherlands     037, 500     697    ---

Norway          277, 500     697    819

Portugal        037, 500     697    819

Spain           284, 500     697    819*

Switzerland/

 French         500          697    819

Switzerland/

 German and

 Italian        500          697    819

Thailand        838          938    ---

Turkey          905          965    ---

United Kingdom  285, 500     697    819*, **

United States   037, 500     697    367

Yugoslavia      870          959    ---

 

* On the 3163 and 3164 displays, the ASCII code page is the national language code page, using character set ISO 646 with the addition of the national language characters supported on those displays.

** On the 3101 display, the ASCII code page is the national language code page, as supported by that display.

*** Code page 819 is IBM's code page of ISO 8859, character set 00697. IBM ASCII displays supported are: 3151, 3161, 3162, 3163, 3164, and 3101-23.

The SNA*ps 5250 (1) Version 1.5 that is used with the direct attachment of Macintosh devices to the AS/400 systems supports the following code pages:

Country/Language     Code Page
US English              037
Multinational           500
Austrian/German         273
Brazilian/Portuguese    037
Danish                  277
Finish                  278
French                  297 (supports French AZERTY and Qwerty)
Italian                 280
Netherlands             037
Norwegian               277
Portuguese              037
Spanish                 284
Spanish Speaking        284
Swedish                 278
English (UK)            285

 


Technical Description

Physical Specifications

·         9404 System Unit:

o        Width: 350mm (13.8 in.)

o        Depth: 750mm (29.5 in.)

o        Height: 650mm (25.6 in.)

o        Weight: 91kg (200 lbs)

Operating Environment

The 9404 is suitable for use in a "quiet office" environment.

* The IBM 9348 model 2 and IBM 7208 models 2 and 12 tape drives have a dry bulb operating temperature range of 16 to 32C (60 to 90F).

Voltage

The 9404 can operate at either low voltage (100-127 VAC) or high voltage (200-240 VAC), 50/60 Hz. The default will be low voltage (100-127 VAC). A specify code (#2961) is required if the customer wants to use high voltage in order to receive the applicable power cord/plug.

Limitations

·         ASCII devices attached to a AS/400 may not provide the same response time as 5250 devices. ASCII displays do not have identical keyboards, attributes, character sets, and functions to 5250 displays. Configuration of ASCII devices is more extensive than 5250 devices.

AS/400 PC Support is not supported for IBM Personal Computers or IBM Personal System/2s attached to 5251-12, 5294, 3174/3274, 5208, 5209, or ROLMbridge.

Hardware Requirements

The minimum system configuration consists of a 9404 System Unit, a system console (display) and 5853 (or equivalent) modem. All models of the AS/400 require the appropriate model-unique version of AS/400 Licensed Internal Code. This model-unique licensed internal code is delivered on magnetic media with the system unit and with model upgrades. The media used is that required for the device specified as the system alternate IPL device. The licensed internal code may also be preloaded on disk storage.

The program size of the IBM AS/400 Licensed Internal Code for the 9404 is 76.5MB.

The system console may be any supported display or IBM Personal Computer emulating a supported display or Personal System/55 (AP only) attached to the Twinaxial Workstation Controller or 5209 Link Protocol Converter or a 3151, 316X, or equivalent attached to the ASCII Workstation Controller or the 5208 Link Protocol Converter. An Apple Macintosh computer workstation may be utilized as the system console when attached to a 9404 MFIOP via the Workstation Adapter (for LocalTalk) feature. The console (display) should be located within 6 meters (20 ft.) of the operator's panel and the operator's panel must be viewable from this display. Although required, the system console is not a component of the base system unit.

Although a printer is not required for service, IBM's ability to diagnose the system and perform upgrades is greatly enhanced when a printer is available.

An IBM 5853, 7855, or equivalent modem is required for electronic customer support but is not a component of the base system unit.

Software Requirements

The 9404 C models and DASD features are designed to operate with OS/400 Version 1 Release 3 or subsequent releases.

It is recommended that all B, C, and D model systems be at Version 2 Release 1 or subsequent release and that the current level cumulative PTF package be applied in conjunction with the installed release. When performing a system upgrade, it is suggested that the IBM service support system and the Preventative Service Package are checked to ensure that required PTFs are available for installation.

OS/400 Version 2 Release 2 and later includes programming that provides for the detection of processor model changes on the 9404, via the use of a 16-character system password. The purpose of the system password is to identify all model changes to help maintain the quality and integrity of the system and to insure the protection of IBM's intellectual property, including IBM Licensed Internal Code and Licensed Programs. After the installation of OS/400 Version 2 Release 2 or later, the system will require a single entry of the system password when a system model change is performed.

There are also rare service conditions that may require re-entry of the system password. If the password must be entered and it is not known, the customer or service representative can select to operate in system password bypass mode. This will allow time to contact the marketing representative, who must obtain the correct system password by placing an RPQ order. If the correct system password is not available and the bypass period expires, the system will not complete the next IPL until the correct system password is provided. In an emergency (system down situation), IBM service can obtain the system password by contacting the ABS Product Support Center.

For more details on the system password, see the "System Operator's Guide," SC41-8082.

9404 installation, model conversion, and optional feature installation will be done by an IBM service representative.

Electronic Customer Support

The modem used for electronic customer support must conform to the following technical specifications:

The following Electronic Customer Support connectivity is supported:

 

                         Connectivity Summary

                   (For electronic customer support)

                                      IBM 5853      IBM 7855

                                      --------      --------

    Switched Line to:

      IBM service support system       2400bps       2400bps*

       via direct dial

      IBMLink via IIN                  2400bps     up to 9600bps

      Remote Q & A via IIN             2400bps     up to 9600bps

    Leased Line to:

      IBM service support system       2400bps     up to 9600bps

       via IIN

      IBMLink via IIN                  2400bps     up to 9600bps

      Remote Q & A via IIN             2400bps     up to 9600bps

      *  7855 in 5853 compatibility mode at 2400bps.

 


Publications

The following publications are shipped with the 9402 Models E04, E06, F04, and F06. To order additional copies, contact your IBM representative.

SLSS is available by order number only. Customers currently subscribing to SLSS will receive publication updates automatically.

The following additional publications are available:


Features -- Specify/Special/Exchange

No Charge Specify Codes

Specify

Other Specify Codes

·         #9022 - EIA 232/V.24 Cable which attaches to the EIA 232/V.24 Adapter feature (#6152) and conforms to:

o        EIA 232-C and 232-D

o        V.24/X.21 bis

o        V.25 bis for Serial Auto-dial Modems

This cable must be ordered if the connection is to any modem eliminator or modem that has a feature known as "Signal Quality Detect" and does not implement CCITT/V.54 loop 2 and loop 3 tests on interface pins 21 and 10.

·         #0040 Mirrored System Disk Level Protection

o        When added to an initial order, this specify code will cause the order to fail if sufficient DASD is not ordered to support device level mirrored protection. On upgrade orders, a warning message will be generated during installation of the upgrade if sufficient DASD is not available to support device level protection across the system.

This is the default cable and must be ordered when the connection is to an IBM modem or a non-IBM modem that implements CCITT/V54 loop 2 and loop 3 tests and does not have the "Signal Quality Detect" feature.

Extended Maintenance Option Specify

Power/Voltage Range and Specify Codes

The 9404 System Unit can operate at either low voltage (100-127VAC) or high voltage (200-240 VAC). The appropriate system power cord will automatically be supplied based on the three-digit country code. If other than the default option is required, specify:

 

#2960    120-Volt Power Cord (Default for U.S., Canada, AP)

#2961    240-Volt Power Cord (Default for EMEA, LA)

 

No Charge Specify Codes Table-1

 

                                   | BXX |   CXX  |   DXX  |Required

Feat  Price File Name              | PXX |   TXX  |        | OS/400

Code  (26 Character Limit)         |10 20|10 20 25|10 20 25|Release

----  ---------------------------- |-- --|-- -- --|-- -- --| -------

0014  EARLY PUBS SHIPMENTS         |     |        |        |V2R3

0019  3995 Opt Libr DataSr Attach  |     |        |M  M  M |V2R1.0

0021  7208 Tape attached to #2621  |     |        |M  M  M |V2R3

0023  3490 E-01 Tape Device        |     |        |M  M  M |V2R3

0024  9348-002 Lc1 Scr Stnd Alon   |     |        |M  M  M |V2R3.0

0025  3490-CXA IN OTHER SYSTEM     |     |        |        |V2R3

0026  3490 IN TAPE LIBRARY         |     |        |        |V2R3

0027  3490 C10,11,22 Other System  |     |        |        |V2R3

0028  Migrate 3490 C10,11,22       |     |        |        |V2R3

0035  9427-210 1c1 Scr Stnd Alon   |     |        |M  M  M |V3R1.0

0036  3490 E-11 Tape Device        |     |        |M  M  M |V2R3

0039  Locally Sourced 9427-211     |     |        |M  M  M |V3R1

0054  3490-E11 Lc1 Scr Side Mnt    |     |        |M  M  M |V2R3

0055  9427-211 Lc1 Scr Side Mnt    |     |        |M  M  M |V3R1.0

0040  Mirrored System Disk Level   |     |        |        |

0042  Mirrored System IOP Level    |     |        |        |

0043  Mirrored System BUS Level    |     |        |        |

1310  SYS for Redistribution       |     |        |S  S  S |V2R3

2924  English                      |S  S |S  S  S |S  S  S |V1R1

2928  French                       |S  S |S  S  S |S  S  S |V1R1

2929  German                       |S  S |S  S  S |S  S  S |V1R1

2930  Japanese Kanji               |S  S |S  S  S |S  S  S |V1R1

2931  Spanish                      |S  S |S  S  S |S  S  S |V1R1

2932  Italian                      |S  S |S  S  S |S  S  S |V1R1

2935  French Canadian              |S  S |S  S  S |S  S  S |V1R1

2962  Traditional Chinese          |S  S |S  S  S |S  S  S |V1R1

2969  Korean                       |S  S |S  S  S |S  S  S |V1R1

2978  Portuguese                   |S  S |S  S  S |S  S  S |V1R1

2982  Finnish                      |S  S |S  S  S |S  S  S |V1R1

2983  Norwegian                    |S  S |S  S  S |S  S  S |V1R1

2987  Swedish                      |S  S |S  S  S |S  S  S |V1R1

2988  Dutch                        |S  S |S  S  S |S  S  S |V1R1

2993  Danish                       |S  S |S  S  S |S  S  S |V1R1

2998  Simplified Chinese           |S  S |S  S  S |S  S  S |V1R1

2960  120 Volt power cord          |S  S |S  S  S |M  M  M |V1R1

2961  240 Volt power cord          |S  S |S  S  S |M  M  M |V1R1

5000  TSP Specify Code             |     |        |S  S  S |V1R1

5001  Customer Solution Center     |     |        |        |V1R1

5002  AS/400 CDSC-Roch MFG         |     |        |        |V1R1

5005  Preload Option               |     |        |S  S  S |V1R1

5008  MES Fastpath                 |     |        |        |V1R1

5009  Special Handling/Scheduling  |     |        |        |V1R1

5348  Base Tape Upgrade (1.2GB)    |     |        |        |V2R1

5349  Base Tape Upgrade (2.5GB)    |     |        |        |V3R0.5

5501  Alt IPL Spec for QIC-120     |     |        |      MR|V2R3

5504  Alt IPL Spec for 3490 EXX    |     |        |      MR|V2R3

5507  Alt IPL Specify for 9348     |     |        |      MR|V2R1

5508  Alt IPL Specify for 3422     |     |        |      M |

5509  Alt IPL Specify for 3430     |     |        |      M |

5510  Alt IPL Spec for QIC-525     |     |        |      MR|V2R1

5511  Alt IPL Specify for 3480     |     |        |      M |

5512  Alt IPL Spe 3490 C10,11,22   |     |        |        |V2R3

5513  Alt IPL Specify for 3490     |     |        |      M |

5514  Alt IPL Specify for 7208     |     |        |      MR|V2R1

5516  Alt IPL Spec for QIC-1000    |     |        |      MR|V2R1

5517  Alt IPL Spec for QIC-2500    |     |        |      MR|V3R0.5

7347  Base Tape Upgrade (525MB)    |     |        |        |V2R1

9022  EIA 232/V.24 Cable Specify  *|MR MR|MR MR MR|SR SR SR|V1R1

9023  EIA 232/V.24 E Cable Spec   *|MR MR|MR MR MR|SR SR SR|V1R1

9024  Token Ring Cable Spec       *|     |        |BR BR BR|V3R1

9025  Ethernet Cable Spec         *|     |        |BR BR BR|V3R1

9050  Twinaxial Workstn Control    |     |        |        |V2R2

9054  LocalTalk Workstn Control    |     |        |        |V2R3

9100  315MB Disk Unit Relocation   |MR MR|MR MR MR|MR MR MR|V1R2.1

9101  Stand Battery Power Unit     |     |        |        |V2R1.1

9106  Standard Dual Disk (640MB)   |     |S  S  S |S  S  S |V1R2.1

9109  Std 988MB Disk Unit Spec     |     |        |        |V2R1.1

9120  Standard Dual Disk (800MB)   |     |        |S  S  S |V2R1

 

No Charge Specify Codes Table-2

 

                                   | BXX |   CXX  |   DXX  |Required

Feat  Price File Name              | PXX |   TXX  |        | OS/400

Code  (26 Character Limit)         |10 20|10 20 25|10 20 25|Release

----  ---------------------------- |-- --|-- -- --|-- -- --| -------

9140  Twinaxial Workstn Control    |MR MR!MR MR MR|MR MR MR|V1R1

9141  ASCII Workstation Control    |MR MR|MR MR MR|MR MR MR|V1R1

9201  Dual Disk Install-Sys Unit   |     |        |S  S    |V2R1

9202  Dual Disk Install-Exp Unit   |     |        |M  M  M |V2R1

9347  Std 525MB 1/4" Tape Spec     |     |        |S  S  S |V2R1

9348  Std 1.2GB 1/4" Tape Spec     |     |        |        |V2R1.1

9501  1/2" MULIC (REEL) on upgrade |     |        |        |

9502  1/2" MULIC (CART) on upgrade |     |        |        |

9503  8MM  MULIC (CART) on upgrade |     |        |        |

9602  STD 1.031GB Disk Unit Spec   |     |        |        |V2R3

9624  Store Device Control Spec    |     |        |        |V2R1.1

9814  20FT Antenna Cable           |     |        |MR MR MR|V3R1

9815  50FT Antenna Cable           |     |        |MR MR MR|V3R1

9862  EIA 232/V.24 One-Line 20E   *|     |        |S  S  S |V2R1

9865  EIA 232/V.24 One-Line 50E   *|     |        |S  S  S |V2R1

9879  20ft/6m V.35 CCITT Cable    *|     |        |MR MR MR|V2R3

9880  80ft/24.4m V.35 CCITT Cable *|     |        |MR MR MR|V2R3

9882  20ft/6m RS449/V.36 CCITT Cab*|     |        |MR MR MR|V2R3

9883  80ft/24.4m RS449/V.36 CCITT *|     |        |MR MR MR|V2R3

9884  150ft/45.7m RS449/V.36 CCITT*|     |        |MR MR MR|V2R3

9885  20ft/6m X.21 CCITT Cable    *|     |        |MR MR MR|V2R3

9890  Omni-Directional Ant (360)   |     |        |MR MR MR|V3R1

9891  Hemispherical Ant (180 Deg)  |     |        |MR MR MR|V3R1

9892  Directional Antenna (90 Deg) |     |        |MR MR MR|V3R1

9980  Serpentine Cable Connection *|     |        |        |V2R3

 

Order Support Codes

-------------------

S - Supported (Load in price file and withdraw on same day)

P - Plant install only

M - MES install only

B - Both Plant and MES install

* - Cable

R - Removal Price released

 

9404 World Trade Unique Codes Table-1

 

Feat  Price File Name                      | BXX |   CXX   |   DXX  |

Code  (26 Character Limit)                 | PXX |   TXX   |        |

                                           |10 20|10 20 25 |10 20 25|

----  ----------------------------         |-- --|-- -- -- |-- -- --|

0020  EMEA IBM Logo AS/400-Yugosl          |     |         |        |

0030  EMEA 7855 Modem                      |     |         |        |

 

9404 World Trade Unique Codes Table-2

 

Feat  Price File Name                           | BXX |   CXX  |   DXX  |

Code  (26 Character Limit)                      | PXX |   TXX  |        |

                                                |10 20|10 20 25|10 20 25|

----  ----------------------------              |-- --|-- -- --|-- -- --|

6070  Upgrade #6105 (320MB) to #6108 (640MB)    |M M  |M  M  M |M  M  M |

6072  Upgrade #6107 (400MB) to #6121 (800MB)    |M M  |M  M  M |M  M  M |

6078  Upgrade #6109 (988MB) to #6123 (1976MB)   |     |        |      M |

6079  Upgrade #9109 (988MB) to #6124 (1976MB)   |     |        |      M |

6080  Upgrade #6125 (988MB) to #6124 (1976MB)   |     |        |      M |

6082  Upgrade #6603 (1967MB) to #6613 (3934MB)  |     |        |        |

6083  Convert #6602 to #6612                    |     |        |        |

6084  Convert #6802 to #6602                    |     |        |        |

6085  Convert #6802 to #6812                    |     |        |        |

6086  Convert #6812 to #6612                    |     |        |        |

6087  Convert #8612 to #6612                    |     |        |        |

6088  Convert #9602 to #6602                    |     |        |        |

6089  Convert #9602 to #6812                    |     |        |        |

8512  Convert #6131 (5 1/4-inch                 |     |        |        |

        Diskette) to #6137                      |     |        |M  M  M |

8513  Convert #6132 (8-inch Diskette) to #6138  |     |        |M  M  M |

8518  Convert #7100 (Expansion Unit) to #7120   |     |        |        |

8519  Convert #7110 (Expansion Unit) to #7120   |     |        |        |

8520  Convert #6346 (1/4-inch Tape) to #6347    |     |        |        |

8521  Convert #2600 to #2624                    |     |        |        |

8523  Convert #6346 (1/4-inch Tape) to #6348    |     |        |        |

9993  EMEA ship from Country Stock              |     |        |        |

 

Order Support Codes

-------------------

S - Supported (Load in price file and withdraw on same day)

P - Plant install only

M - MES install only

B - Both Plant and MES install

* - Cable

R - Removal Price released

 

Special Feature Codes -- Chargeable

Optional Non-Communication Features

The following optional features may be added to the 9404 models. All are available when initially ordered and as field upgrades except as noted. The IBM service representative is responsible for installing all upgrades and optional features. Four card slots are available in the 9404 System Unit. Five additional card slots are available in either the #7100, #7110 or #7120 Expansion Units.

When ordering features, it is necessary to consider the number of card slots required by the feature and the number of card slots available in each model. The main storage slots are fixed. Any of the four card slots can be used for I/O expansion. The number of I/O cards that can be attached to each model is listed in the description of the feature.

When ordering a 9404 System Unit using the HONE configurator CFAS400, the card slot count consideration will be handled automatically by the configurator for initial orders. If the configurator is not used, then the guidance provided in the feature descriptions should be used to configure a system.

(#2620) Cryptographic Processor

(For IBM US, No Longer Available as of December 31, 1999)

The Cryptographic Processor feature performs cryptographic functions based on a hardware implementation of the ANSI standard Data Encryption Standard (DES) and the RSA Public Key Algorithm (PKA). (The RSA algorithm was defined by R. Rivest, A. Shamir and L. Adleman.) Cryptographic applications are a cost-effective way of providing confidentiality and/or authentication and integrity assurance for many forms of valuable data. This protection is especially important in networks, which may be vulnerable to unauthorized access to data and resources. Application areas include banking, Electronic Data Interchange (EDI) and protection of proprietary information such as engineering drawings, customer lists, product plans, and personnel records.

Functions provided include encryption and decryption of data, authentication and verification of messages and data, creation and management of financial personal identification numbers (PINs) and management of cryptographic keys. The Public Key Algorithm supports the generation and verification of digital signatures for applications requiring positive electronic authentication of the identity of the sender of a message. The PKA function also provides efficient distribution of encrypted DES cryptographic keys.

Control of the tamper-resistant cryptographic hardware is provided through the supporting PRPQs listed below and optionally, through IBM Personal Security Cards using the IBM 4754-001 Security Interface Unit. The cryptographic functions provided conform to the IBM Common Cryptographic Architecture, are compatible with the IBM Transaction Security System, and interoperate with most DES based cryptographic products including IBM cryptographic products on MVS, RS/6000 (WT only), OS/2 and DOS and the IBM Cryptographic Support/400 licensed program (5728-CR1, 5738-CR1, 5763-CR1). Through its extensive use of industry standards, the cryptographic processor also interoperates with most other DES based cryptographic products.

This feature consists of an I/O processor card with a cable to attach a 4754-001, and a cable wrap connector (1 per system). The 4754-001, if desired, must be ordered separately.

Export authorization from the U.S. Government is required to ship this feature to countries outside the U.S. and Canada. Other countries may also regulate the export of this feature. Export licenses for feature #2620 will generally be approved for shipment to financial institutions and subsidiaries of U.S. companies. Export of feature #2628 may be approved in other cases. Check with your local export regulation coordinator for specific country requirements.

This feature requires the support of OS/400 Version 2 Release 3 and PRPQ 5799-FBR or OS/400 Version 3 Release 1.0 or later, and PRPQ 5799-XBY. PKA functions require OS/400 Version 3 Release 1.0 or later, and PRPQ 5799-XBY. Feature #2620 is not supported by IBM Cryptographic Support/400.

Publications: For additional information refer to the following:

Card slots required: One. Maximums: One on all D and later models except 9402 D02 and E02 which do not support this feature.

Battery Backup and Main Storage Features

(#1101) Battery Power Unit

(For IBM US, No Longer Available as of July 1, 1997)

The Battery Power Unit is standard on the 9404 E and F models and optional on all other models.

This feature provides a minimum of five minutes of backup power after power has been lost. The backup power is to the entire system unit or expansion unit. If feature #1101 is installed in the system unit, then an additional feature #1101 must be ordered for the expansion unit. When power is lost, the system will continue to operate. When the battery current is low, the system will begin an orderly shut down if power has not returned. The Battery Power Unit consists of the batteries and the charging circuit. Card slots used: None. Maximum: Two. One in the system unit and one in the expansion unit.

(#3108) 8MB Main Storage

The 8MB Main Storage feature card plugs directly into a card slot in the system unit and is available for the Models C25 and D20. Two 4MB Main Storage Expansion (#4114) cards can be connected to the 8MB Main Storage (#3108) card. Achieving the main storage maximum on the C25 and D20 requires that 8MB Main Storage (#3108) cards be installed in the two available main storage card slots and two 4MB Main Storage Expansion (#4114) cards be connected to each card. Any existing 4MB Main Storage (#4104) cards would have to be removed from the main storage slots. Card slots used: One. Maximum: Two.

(#4104) 4 MB Main Storage

This 4 MB Main Storage card is available for all models of the 9404 except the Model D25 and all E and F models. This card plugs directly into a card slot in the system unit and is the first card required when adding main storage to the Model B10/B20/C10 or C20. Card slots used: One. Maximum: One on the B10 or C10, two on the B20, C20, C25, D10, or D20. Achieving the main storage maximum on the Model C25 requires that 8 MB Main Storage (#3108) cards be installed in the available main storage card slots. Therefore, any existing 4 MB Main Storage (#4104) cards would have to be removed from the main storage slots.

Order the upgrade from 4MB Main Storage (#4104) to 8MB Main Storage (#3108) as a feature conversion MES.

(#4114) 4 MB Main Storage Expansion

The 4 MB Main Storage Expansion card plugs into the 4 MB or 8 MB Main Storage cards #4104 or #3108. Up to two 4 MB Main Storage Expansion cards may be connected to either the 4 MB or 8 MB Main Storage cards. This feature is available for all models that support #4104 or #3108. Card slots used: None. Maximum: Two on the Models B10 and C10 and four on the Models B20, C20, C25, D10, or D20.

DASD Features

(#2600) Magnetic Storage Device Controller

(For IBM US, No Longer Available as of July 31, 1996)

This feature is always required when DASD features #6100, #6105, or #6108, are installed in the third DASD position of a 9404 Model B10, B20, C10, C20, or C25 System Units with the dual disk installation feature, #7201, or in a Model B20, C20, or C25 attached #7100 Expansion Unit with the Dual Disk Install feature, #7202. One slot is required. This feature is supported on the Models D10, D20, and D25 as part of an upgrade, but is not orderable as a new feature. This device is not supported on the E and F models.

(#2624) Storage Device Controller

(For IBM US, No Longer Available as of March 31, 1999)

This feature, available only for the D, E, and F models, provides attachment capability for additional DASD in the system unit or attached expansion units (#7100, #7110, or #7120) and in the Storage Expansion Unit (#7203). One Storage Device Controller (#2624) is required to support DASD in the third DASD position in all 9404 D10 and D20 models with either specify code #9201 or feature #7201 on the system, and in the D25, and in all E and F models. One Storage Device Controller (#2624) is required to support DASD in the third DASD position of the #7110 or #7120 Expansion Unit or the #7100 Expansion Unit with Dual Disk Install - Expansion Unit (#7202). The Storage Device Controller is also required when attaching the Storage Expansion Unit (#7203). Card slots used: One. Maximum: Two; one in the system unit and one in the expansion unit.

(#5133) Feature Power Supply

(For IBM US, No Longer Available as of August 31, 1998)

Whenever the third DASD position is used in either the 9404 System Unit or the Expansion Unit (#7100, #7110, or #7120), the Feature Power Supply is required. Feature Power Supply is also required when installing the Storage Expansion Unit (#7203). Card slots used: None. Maximum: Two. One in the system unit and one in expansion unit.

(#6100) Disk Unit (315 MB)

(Withdrawn from Marketing)

The 5 1/4-inch Disk Unit - 315 MB is used for permanent storage on the 9404. One optional disk unit may be added to a B10 or B20 System Unit. One or two optional disk units may be added to a C10, C20, or C25 System Unit. Up to four disk units may be installed in a Model B20, C20 or C25 attached expansion unit. If Dual Disk Install - Expansion Unit (#7202) is on the #7100 Expansion Unit, the fourth position may not be used for DASD. Three DASD units may be installed in a #7110 Expansion Unit. Utilizing the third DASD position in either the system unit or the expansion unit requires the Feature Power Supply (#5133) as a prerequisite. This feature is supported on the D, E, and F models as part of an upgrade, but is not orderable as a new feature. Card slots used: None.

(#6105) Single Disk Unit (320 MB)

(For IBM US, No Longer Available as of September 29, 1995)

The 3 1/2-inch single drive, 320 MB DASD unit is used for permanent storage in the 9404 System Unit and in attached #7100, #7110, or #7120 Expansion Units. One or two optional Single Disk Units may be added to the system unit. In addition, one to four optional Single Disk Units may be added to a #7100 Expansion Unit. If Dual Disk Install - Expansion Unit (#7202) is on the #7100 Expansion Unit, the fourth DASD position may not be used. One to three 320 MB single disk units may be installed in a #7110 or #7120 Expansion Unit. Adding DASD to the third DASD position in either the system unit or to an expansion unit requires Feature Power Supply (#5133) as a prerequisite. Feature #2600 or #2624 may also be required. Refer to features #2600 and #2624 descriptions. Feature #6105 can be upgraded to a feature #6108 Dual Disk Unit. This feature is supported on F models as part of an upgrade, but not orderable as a new feature.

This feature is not supported on the 7203 Storage Expansion Unit. Card Slots Used: None. Maximums:

 

       Model     System Unit    Expansion Unit        Expansion

                                   (#7100)              Unit*

       -----     -----------    --------------        ---------

        C10           2         Not Applicable       Not Applicable

        C20           2              4          or        3

        C25           2              4          or        3

 

* Expansion Unit #7110, #7120 or Expansion Unit #7100 with feature #7202. See Expansion Unit feature descriptions for applicability to system models.

Maximum DASD units in the Expansion Unit (#7100) is limited to three if the optional Cartridge Tape Unit (#6346) or the Dual Disk Install - Expansion Unit (#7202) is installed.

(#6106) Dual Disk Unit (640 MB)

(For IBM US, No Longer Available as of November 4, 1994)

The Dual Disk Unit (640 MB) contains two 320 MB 3 1/2-inch DASD drives and can be installed in all 9404 models in the first DASD position. This feature, available for field install only, by IBM service representatives, is for upgrading the base DASD in a 9404 which still has a single 315 MB disk unit in the first slot. The 315 MB disk unit which must be removed from the first slot may be reinstalled in the third slot, or any position in an expansion unit, or in any open position in another system.

IMPORTANT: Installing this feature requires a total save and restore of all DASD on the system and reload of model unique licensed internal code. In addition to the time this process takes, because it involves licensed internal code, operating system code and customer data, planning and care must be exercised to not experience data loss and its associated recovery time. Instructions on the installation procedure are included with feature #6106. An IBM service representative will install feature #6106 and reload the model unique licensed internal code. The customer is responsible for saving all data off the DASD before the installation of feature #6106 and restoring all data after the IBM service representative completes the installation. Card slots used: None. Maximums: One in the base (first position) of a 9404 System Unit.

When feature #6106, Dual Disk Unit (640 MB), is field installed in a system unit, it replaces the 315 MB disk unit in the first position. The 315 MB disk unit which must be removed from the first position may be reinstalled in the third position, (requires feature #5133), or any position in an expansion unit, or in any open position in another system. When that is done, specify codes need to be added to the system's inventory record to accurately reflect the resulting DASD configuration.

When feature #6106 is added to a system unit with two drives installed, and the drive in position one will be removed and reinstalled in the third position, order specify code #9100, quantity two, on the base system unit to indicate that both the original drives will remain in the system unit. When #6106 is added to a system unit with three drives installed, and the drive in the first position is removed, order specify code #9100, quantity one, on the base system unit to indicate that the drive in the second position will remain there. If the removed drive is subsequently installed in an expansion unit, or in another system, a second #9100 specify code should be ordered on the receiving system unit to indicate the presence of an extra disk. These codes will be included automatically by the HONE configurator, CFAS400, for orders to be entered via SYSLINK. If the configurator is not used, the codes must be manually included in the configuration and ordered.

This feature is orderable on the B, C, and D models and is supported on the E and F models when ordered as a feature conversion MES.

(#6107) Single Disk Unit (400 MB)

(For IBM US, No Longer Available as of February 23, 1996)

This 3 1/2-inch single drive 400 MB DASD unit is used for permanent storage in the 9404 B, C, D, E, and F model system units and attached expansion units. One or two 400 MB single disk units may be added to the system unit. One to four 400 MB single disk units may be added to a #7100 Expansion Unit. If the dual disk install feature (#7202) is on the #7100 Expansion Unit, the fourth position may not be used for DASD. One to three 400 MB single disk units may be added to a #7110/#7120 Expansion Unit. One to two 400 MB single disk units may be added to the Storage Expansion Unit (#7203), available on the Model D25 and E25 only. Whenever DASD is installed in the third DASD position of either the system unit or an expansion unit, Feature Power Supply (#5133) is required. Installing DASD in the third DASD position may also require an additional storage device controller (#2600 or #2624). See those feature descriptions for requirements.

Card slots used: None. Maximums: See the following table for the maximum number of Single Disk Units (400 MB) (#6107) that can be installed.

 

Model          System Unit     Expansion      Storage Expansion Unit

                                  Unit*               (#7203)

-----          -----------   --------------   ----------------------

D10/E10              2            3               not applicable

D20/E20              2            3               not applicable

D25/E25

F10/F20/F25          2            3                      2

 

*  Expansion Unit #7110, #7120 or Expansion Unit #7100 with

feature #7202.

See Expansion Unit feature descriptions for applicability to system

models.

 

Note: It may be desirable to upgrade (#6107) to (#6120) rather than continuing to add single disk units.

(#6108) Additional Dual Disk Unit

(For IBM US, No Longer Available as of September 29, 1995)

This feature contains two 320 MB 3 1/2-inch DASD drives for a total of 640 MB and can be installed in 9404 System Units with Dual Disk Install - System Unit (#7201 or #9201) installed as a prerequisite, or in an attached #7110/#7120 Expansion Unit, or in a #7100 Expansion Unit with Dual Disk Install - Expansion Unit (#7202) installed as a prerequisite. Whenever DASD is installed in the third DASD position of either the system unit or the expansion unit, Feature Power Supply (#5133) is required. Installing dual disk units in the third position of a system unit or expansion unit requires Storage Device Controller (#2600 or #2624). See feature #2600 or #2624 descriptions for requirements. An installed Single Disk Unit-320MB, feature #6105, may be converted in the field to a feature #6108, Additional Dual Disk Unit-640MB. It is ordered as a Feature Conversion MES. This feature is supported on the F models but not orderable on the F models.

This feature is not supported on the 7203 Storage Expansion Unit.

(#6109) Single Disk Unit - 988 MB

(For IBM US, No Longer Available as of September 29, 1995)

The #6109 Single Disk Unit contains one 988 MB 3 1/2-inch disk drive. One #6109 may be installed in Model D10 or D20 System Units. Prerequisites include Dual Disk Install - System Unit (#7201/#9201), Feature Power Supply (#5133) and Storage Device Controller (#2624). One or two #6109 features may be installed in Model D25, E and F model System Units. Adding the second feature #6109 requires Feature Power Supply (#5133) and Storage Device Controller (#2624) as prerequisites. One feature #6109 may be installed in a #7100 Expansion Unit attached to a D model, with prerequisites, Dual Disk Install - Expansion Unit (#7202), Feature Power Supply (#5133) and Storage Device Controller (#2624). Up to three optional #6109 disk units can be installed in D, E and F model attached #7110 and #7120 Expansion Units. Adding a third optional feature #6109 to a #7110 or #7120 Expansion Unit requires Feature Power Supply (#5133) and Storage Device Controller (#2624) as prerequisites. Two #6109 features may be added to the Storage Expansion Unit (#7203) on Models D25, E25 and F25 only. Card slots used: None. Maximums: See the following table.

 

                  9404       Expansion Units  Storage Expansion Unit

Model          System Unit     #7110/#7120             #7203

-----          -----------   --------------   ----------------------

D10/D20             1               3            Not Applicable

 

E10/E20             2               3            Not Applicable

 

D25/E25

F10/F20             2               3                   2

F25

 

(#6120) Dual Disk Unit (800 MB)

(For IBM US, No Longer Available as of February 23, 1996)

The Dual Disk Unit (800 MB) contains two 400 MB DASD drives and can be installed only in the B, C and D models in the first DASD position. This feature, available for field installation is for upgrading the base DASD in a B, C or D Model which was previously, or is being concurrently upgraded from a Model that still has a single 315 MB disk unit in the first DASD position. The 315 MB disk unit which must be removed from the first DASD position may be reinstalled in the third DASD position, any position in an Expansion Unit or in any open position in another system.

IMPORTANT: Installing this feature requires a total save and restore of all DASD on the system and reload of model unique licensed internal code. In addition to the time this process takes, because it involves licensed internal code, operating system code and customer data, planning and care must be exercised to not experience data loss and its associated recovery time. Instructions on the installation procedure are included with feature #6120. An IBM service representative will install feature #6120 and reload the model unique licensed internal code. The customer is responsible for saving all data off the DASD before the installation of feature #6120 and restoring all data after the IBM service representative completes the installation. Card slots used: None. Maximums: One in the base (first position) of a 9404 B, C or D model system unit.

When feature #6120, Dual Disk Unit (800 MB), is field installed in a system unit, it replaces the 315 MB disk unit in the first position. The 315 MB disk unit which must be removed from the first position may be reinstalled in the third position, (requires feature #5133), or any position in an expansion unit, or in any open position in another system. When that is done, specify codes need to be added to the system's inventory record to accurately reflect the resulting DASD configuration.

When feature #6120 is added to a system unit with two drives installed, and the drive in position one will be removed and reinstalled in the third position, order specify code #9100, quantity two, on the base system unit to indicate that both the original drives will remain in the system unit. When #6120 is added to a system unit with three drives installed, and the drive in the first position is removed, order specify code #9100, quantity one, on the base system unit to indicate that the drive in the second position will remain there. If the removed drive is subsequently installed in an expansion unit, or in another system, a second #9100 specify code should be ordered on the receiving system unit to indicate the presence of an extra disk. These codes will be included automatically by the HONE configurator, CFAS400, for orders to be entered via SYSLINK. If the configurator is not used, the codes must be manually included in the configuration and ordered.

Note: Dual Disk Unit (#6120) can be used on B and C models with OS/400 V2R1 or higher.

(#6121) Additional Dual Disk Unit (800 MB)

(For IBM US, No Longer Available as of February 23, 1996)

This 3 1/2-inch 800 MB dual drive DASD unit is used for permanent storage in the 9404 B, C, D, E, and F model system units and attached expansion units. Model BXX and CXX System Units require Dual Disk Install - System Unit #7201. Model D10 and D20 System Units require Dual Disk Install - System Unit (#7201 or #9201). The #7100 Expansion Units require Dual Disk Install - Expansion Unit (#7202). The #7110/#7120 Expansion Units The #7110/#7120 Expansion Units have dual disk install capability. One or two optional dual disk units may be added to a B, C, or D model system unit. One to three dual disk units may be added to #7100, #7110, or #7120 Expansion Units. One to two dual disk units may be added to the Storage Expansion Unit (#7203) on the Model D25, E25, and FXX only. Whenever DASD is installed in the third DASD position of either the system unit or the expansion unit, Feature Power Supply (#5133) is required. Installing 800MB DASD in the third DASD position requires an additional storage device controller (#2600, #2624). See those feature descriptions for requirements.

Card slots used: None. Maximum: See the following table for the maximum number of Additional Dual Disk Unit (800 MB) (#6121) that can be installed.

 

Model          System Unit     Expansion      Storage Expansion Unit

                                 Unit*                (#7203)

---------      -----------   --------------   ----------------------

    C10              2           N/A               not applicable

    C20              2            3                not applicable

    C25              2            3                      2

 

* Expansion Unit #7110/#7120 or Expansion Unit #7100 with feature #7202.

 

Upgrade Considerations: Feature #6107, Single Disk Unit-400MB may be converted in the field to feature #6121, Additional Dual Disk Unit-800MB, via a feature conversion MES. Card slots used: None.

(#6125) Base DASD Replacement (988 MB)

(For IBM US, No Longer Available as of September 29, 1995)

This 988 MB single DASD unit can be ordered as a replacement for the first, base DASD unit installed in a 9404 B, C, or D model that was, or is being upgraded to a 9404 D25 or any E or F model. This feature should only be ordered when all available DASD positions are filled, and additional DASD capacity is required. The base DASD unit that is replaced, cannot be traded-in, and with all system DASD positions filled, cannot be installed elsewhere on the system. The advantage of this upgrade is the increase in DASD capacity with the new feature, over the removed feature. When replacing a 315 MB DASD unit, one Specify Code #9100 must be ordered if the second 315 MB disk unit remains in position two. When replacing a 640MB dual disk unit, #6106 or #9106 must be removed. When replacing a 800MB dual disk unit, #6120 or #9120 must be removed. Card slots used: None. Maximums: One in the base (first position) of a 9404 E model system unit. This feature is available for field install only.

(#6127) Base DASD Replacement (1,976 MB)

(For IBM US, No Longer Available as of September 29, 1995)

This 1,976 MB dual DASD feature can be ordered as a replacement for the first, base DASD unit installed in a 9404 B, C, or D model that was, or is being upgraded to a 9404 D25 or any E or F model. This feature should only be ordered when all available DASD positions are filled, and additional DASD capacity is required. The base DASD unit that is replaced, cannot be traded-in, and with all system DASD positions filled, cannot be installed elsewhere on the system. The advantage of this upgrade is the increase in DASD capacity with the new feature, over the removed feature. When replacing a 315 MB DASD unit, one Specify Code #9100 must be ordered if the second 315 MB disk unit remains in position two. When replacing a 640 MB dual disk unit, #6106 or #9106 must be removed. When replacing a 800 MB dual disk unit, #6120 or #9120 must be removed. Card slots used: None. Maximums: One in the base (first position) of a 9404 E model system unit. This feature is available for field install only.

(#7100) Expansion Unit

This feature provides space for adding up to four single disk units (#6100, #6105, or #6107), a 1/4-inch cartridge tape unit, and a diskette unit, and five feature card slots. If the 1/4-inch cartridge tape unit is installed in the expansion unit, only three disk units may be added to the expansion unit. If the expansion unit has Dual Disk Install - Expansion Unit (#7202) installed, then, up to three Dual Disk Units (#6108 or #6121) may be installed. Feature #7100 is orderable for the Models B20, C20, and C25 only, and is supported on the D models. Expansion Unit (#7100) may be upgraded to Expansion Unit (#7110/#7120).

Upgrade Considerations:

Feature #7100 Expansion Unit may be converted in the field to feature #7110 Expansion Unit. This conversion provides Hardware Data Compression (HDC) capability for 1/4-inch cartridge tape units installed in the expansion unit. Dual Disk Install - Expansion Unit (#7202) is a prerequisite feature for ordering this feature conversion MES.

Feature #7100 Expansion Unit may be converted in the field to feature #7120 Expansion Unit. This conversion provides Hardware Data Compression (HDC) capability for 1/4-inch cartridge tape units installed in the expansion unit.

Feature #7110 Expansion Unit may be converted in the field to feature #7120 Expansion Unit. Card slots used: None.

(#7201) Dual Disk Install - System Unit

(For IBM US, No Longer Available as of July 31, 1996)

This feature is available for installation in a 9404 B10/B20/C10/C20/C25 or D10/D20 (if feature #9201 is not factory installed) system unit and is a prerequisite for the installation of Additional Dual Disk Units, feature #6108 in the system unit. If the system unit has Feature (#7201) and a Dual Disk Unit-640MB, feature #6106 or specify code #9106, installed in the first position, then Additional Dual Disk Units (#6108) may be installed in DASD positions two and three. If the system does not have #9106 or #6106, and therefore has 315 MB Disk Units in DASD positions one and two, then only one Additional Dual Disk Unit (#6108) may be installed in DASD position three. Feature Power Supply (#5133) is always required when a DASD drive is installed in the third DASD position of the system unit. Feature #2600/#2624, Magnetic Storage Device Controller is also required when the Dual Disk Install - System Unit (#7201), is installed on the system unit, and the third DASD position is utilized. See feature #2600/#2624 description for details.

(#7202) Dual Disk Install - Expansion Unit

(For IBM US, No Longer Available as of July 31, 1996)

This feature is available for installation in a 9404 attached Expansion Unit (#7100) and is a prerequisite for the installation of Additional Dual Disk Units (#6108), in the expansion unit. With this feature (#7202), up to three Additional Dual Disk Units (#6108) may be installed in DASD positions one, two and three. Feature Power Supply (#5133) is always required when a DASD drive is installed in position three of the expansion unit. Magnetic Storage Device Controller, feature #2600 or #2624 is also required when the Dual Disk Install-Expansion Unit (#7202), is installed in the expansion unit, and the third DASD position is utilized. See feature #2600/#2624 description for details. When Dual Disk Install (#7202) is installed in an Expansion Unit (#7100), the fourth position cannot be used for DASD.

(#6132) Diskette Unit (8-inch)

(For IBM US, No Longer Available as of July 31, 1996)

An 8-inch diskette unit is available for use in transferring data or programs between the 9404 and systems including the 9406, 5360, 5362, System/38 and other compatible systems. This feature cannot be ordered for the 9404 D25, E, or F model System Units or the #7110 or #7120 Expansion Units. See feature #6138. Card slots used: None. Maximum: Two (#6131 or #6132)

Tape Features

(#6346) 120MB 1/4-inch Cartridge Tape Unit

(For IBM US, No Longer Available as of November 4, 1994)

The 120MB 1/4-inch cartridge tape drive is a low cost, high-function, streaming tape drive for the AS/400 9404 B, C and D models. It may be used for save/restore, program distribution, migration, and 1/4-inch Cartridge tape interchange. This device requires the support of OS/400 Version 1 Release 1 or later.

Hardware Data Compression (HDC) is supported on the Model D25 System Unit and when installed in the #7110 Expansion Unit.

Full interchange of data in the 120MB format is supported with all the standard and optional 1/4-inch cartridge tape units provided on the AS/400 9402, 9404 and 9406 models.

The 120MB 1/4-inch Cartridge Tape Unit supports the following media and formats:

The 120 MB 1/4-inch Cartridge Tape Unit has an effective data rate of 90KB per second when operating in the 120MB format.

The 120 MB 1/4-inch Cartridge Tape Unit attaches to the 9404 system via the Storage Device Controller when attached as a feature in the expansion unit.

Feature #6346 can be ordered and installed in the Expansion Unit #7100 on B and C model systems. It is supported on D models, but must be removed or converted to #6347 when upgrading to an E or F model (at a charge). Card slots used: None. Maximum: One.

The IBM 0.25 Cleaning Cartridge Kit, P/N 21F8570, provides necessary head cleaning capability for the 120MB 1/4-inch Cartridge Tape Unit.

(#6347, #7347, #8347, #9347) 525 MB 1/4-inch Cartridge Tape Unit

(For IBM US, features #6347, #7347 and #8347 are No Longer Available as of November 4, 1994)

(For IBM US, feature 9347 is No Longer Available as of July 31, 1996)

The 525 MB 1/4-inch cartridge tape drive is a low cost, high-function, streaming tape drive for the all 9404 models. It may be used for save/restore, alternate IPL, program distribution, migration, and 1/4-inch Cartridge tape interchange. This device requires the support of OS/400 Version 2 Release 1 or later.

Full interchange of data is supported with all the standard and optional 1/4-inch cartridge tape units provided on the AS/400 9402, 9404, and 9406 systems.

The 525 MB 1/4-inch Cartridge Tape Unit supports the following media and formats:

The 525 MB 1/4-inch Cartridge Tape Unit has an effective data rate of 200KB per second when operating in the 525 MB format, and 90 KB per second when operating in the 120 MB format.

The 525 MB 1/4-inch Cartridge Tape Unit attaches to the 9404 system via the base Multi-Function I/O Processor in the base tower, or the Storage Device Controller when attached as a feature in the expansion unit.

Hardware Data Compression (HDC) is supported on the Model D25 system unit, #7110/#7120 expansion units and on all E and F model system units.

Feature #6347 is the 525 MB 1/4-inch Cartridge Tape Unit available for all models of the 9404 in the #7100/#7110/#7120 expansion units.

Feature #7347, available via MES only, provides for the upgrade of a 120MB 1/4-inch Cartridge Tape Unit to a 525 MB model, and must be ordered with the upgrade of a 9404 B, C, or D model, without a 525 MB 1/4-inch cartridge tape unit in the system unit (feature #8347 or #9347), to a 9404 E or F model. There is no charge for this feature which can only be ordered with an E or F model upgrade. Parts removed and/or replaced are the property of IBM. Optional feature 120MB cartridge tape units (feature #6346), are not supported on the 9404 E or F model and must be removed, or converted, for a charge, to a 525MB 1/4-inch Cartridge Tape Unit (#6347).

Feature #8347 provides for the replacement of a 120MB 1/4-inch Cartridge Tape Unit with a 525MB 1/4-inch Cartridge Tape Unit on a 9404 B, C or D model system unit.

Feature #9347 is the specify code used to designate a 525MB 1/4-inch Cartridge Tape Unit included in the base of a new 9404 D and E model system order.

The IBM 0.25 Cleaning Cartridge Kit, P/N 21F8570, provides necessary head cleaning capability for the 525MB 1/4-inch Cartridge Tape Unit.

(#5348, #6348, #7348, #8348, #9348) 1.2 GB 1/4-inch Cartridge Tape Unit

The 1.2GB 1/4-inch cartridge tape drive is a low cost, high-function, streaming tape drive for the 9404 Model D25 and all E and F models. It may be used for save/restore, alternate IPL, program distribution, migration, and 1/4-inch cartridge tape interchange. This device requires support of OS/400 Version 2 Release 2 or later.

Full interchange of data is supported with all the standard and optional 1/4-inch cartridge tape units provided on the AS/400 9402, 9404, and 9406 models, using the proper media and density.

The 1.2 GB 1/4-inch Cartridge Tape Unit supports the following media and formats:

The 1.2 GB 1/4-inch Cartridge Tape Unit has an effective data rate of 300 KB per second when operating in the 1.2 GB format, 200 KB per second when operating in the 525 MB format, and 90 KB per second when operating in the 120 MB format.

The 1.2 GB 1/4-inch Cartridge Tape Unit attaches to the 9404 Models D25 and all E and F models via the Multi-Function I/O Processor in the base system unit or the storage device controller when attached as a feature in a #7110 or #7120 Expansion Unit. Hardware Data Compression (HDC) is supported. Feature #5348, available via MES only, provides for the upgrade of a 120 MB 1/4-inch Cartridge Tape Unit to a 1.2GB model, and must be ordered with the upgrade of a 9404 B, C or D model, without a 525 MB or 1.2 GB 1/4-inch Cartridge Tape Unit in the system unit (feature #8347, #9347, #9348 or #7348), to a 9404 F model. There is no charge for this feature which can only be ordered with an F model upgrade. Parts removed and/or replaced are the property of IBM. Optional feature 120 MB Cartridge Tape Units (feature #6346), are not supported on the 9404 F models and must be removed or converted, for a charge, to a 1.2 GB 1/4-inch Cartridge Tape Unit.

Order feature #6348 for placement in a #7110 or #7120 Expansion Unit on any 9404 D25, E or F model (Plant or MES).

Order feature #7348 to replace the current 1/4-inch cartridge tape unit in the base of an installed system with the 1.2GB unit. Order a REMOVE of the existing base tape unit and an ADD of feature #7348. This feature is available only via MES to installed D25, E and F models.

Order feature #8348 from the plant to replace the standard base 525MB 1/4-Inch Cartridge Tape Unit (#9347) with the 1.2GB Tape Cartridge Unit on new E model. Feature #8348 can be ordered in place of feature #7347 via MES on B, C, or D model upgrades to E models to obtain the 1.2GB Tape Cartridge Unit.

Feature #9348 is the specify code used to designate a 1.2GB 1/4-inch Cartridge Tape Unit included in the base of a new 9404 F model system order. The IBM 0.25 Cleaning Cartridge P/N 46G2675 (US and Canada), P/N 8191177 (outside of US and Canada), provides the necessary head cleaning capability for the 1.2GB 1/4-inch Cartridge Tape Unit.

(#6349, #7349, #8349) 2.5 GB 1/4-Inch Cartridge Tape Unit

(For IBM US, #6349 No Longer Available as of August 31, 1998)

(For IBM US, No Longer Available as of July 1, 1997)(For 7349, 8349)

The 2.5 GB 1/4-Inch Cartridge Tape Unit is a low cost, high-function, streaming tape drive for AS/400 systems. It may be used for save/restore, alternate IPL, program distribution, migration, and 1/4-inch cartridge tape interchange. The 2.5 GB 1/4-Inch Cartridge Tape Unit records data in the QIC-2GB format. This device requires support of OS/400 Version 3 Release 0.5.

Full interchange of data is supported with all the standard and optional 1/4-Inch Cartridge Tape Units provided on the AS/400 9402, 9404, and 9406 models, using the proper media and density.

The 2.5 GB 1/4-inch Cartridge Tape Unit supports the following media and formats:

The 2.5 GB 1/4-Inch Cartridge Tape Unit has an effective data rate of 300KB per second when operating in the QIC-2GB or QIC-1000 formats, 200KB per second when operating in the QIC-525 format and 120KB per second when operating in the QIC-120 format.

Features supported - 9404:

Feature #6349 is the optional 2.5 GB 1/4-Inch Cartridge Tape Unit for placement in the #7110/#7120 Expansion unit. This feature requires V3R0.5. This feature is available only via MES to an installed Model D25, all E models and can be installed in the plant or as an MES for all F models.

Feature #7349 is ordered to replace the current 1/4-Inch Cartridge Tape Unit in the base of an installed system with the 2.5GB unit. Order a REMOVE of the existing base tape unit and an ADD of feature #7349. This feature is available only via MES to an installed Model D25 or any E or F models.

Feature #8349 is ordered from the plant to replace the standard base 1.2GB 1/4-Inch Cartridge Tape Unit (#9348) with the 2.5GB 1/4-Inch Cartridge Tape Unit on a new F Model. Feature #8349 can be ordered in place of feature #5348 via MES on B, C or D model upgrades to F models to obtain the 2.5GB 1/4-Inch Cartridge Tape Unit.

Maximums: Two on the Model D25, E and F models.

I/O Attachment Features

(#2621) Removable Media Device Attachment

(For IBM US, No Longer Available as of June 30, 2000)

This feature provides for attachment of one or two 7208 Model 002 or Model 012 or 9348 Magnetic Tape Units in any combination, or one 3995 Optical Library Dataserver Models 142, A43, 43, or 143 to 9404 B, C, D, E, or F models. Feature #2621 supports alternate IPL from attached tape drives when installed in the system unit of a 9404 D25, E or F model.

Hardware Data Compression is available in the attachment for 8mm cartridge and 1/2-inch reel-to-reel tape applications. The effective media capacity can be increased approximately 1.4 times, depending on the data. AS/400 1/2-inch reel-to-reel compressed tapes are compatible with System/38 3422 and 3430 compressed tapes.

Card slots used: One. Maximum: See the Magnetic Tape Attachment Table.

(#2622) 3490 Magnetic Tape Subsystem Attachment

(For IBM US, withdrawn from marketing as of March 20, 1995)

The 3490 Magnetic Tape Subsystem Attachment provides for attachment of the following Magnetic Tape Subsystem Models:

Subsystem Attachment (#2622) supports attachment of up to eight 3490E/3490/3480 tape drives, or up to four 3430/3422 tape drives, and provides a hardware data compression function for use with all tape drives listed above. The Hardware Data Compression (HDC) function can increase the effective media capacity by up to two times, depending on the data.

Feature #2622 supports IDRC when used to attach a 3480, 3490, or 3490E Magnetic Tape Subsystem. IDRC can increase the effective media capacity by up to three times, depending on the data. The Hardware Data Compression (HDC) function can be used in conjunction with IDRC in the drive, but does not necessarily result in greater data compression.

The two channel switch feature available on all control units may be used with feature #2622.

Not all cables are supplied with this feature and may need to be ordered separately.

·         Attachment of the 3430, 3422, 3480, or 3490/3490E AXX/BXX model tape drives requires the use of External Channel (Bus/Tag) cables. These cables must be ordered separately. For cable ordering information see "Physical Planning" manual (GC22-7064).

I/O Card Slots Used: One. Maximum: See the Magnetic Tape Attachment Table.

Power control is not provided for attaching tape drives. The attached tape drives must be operated in "local" power control mode and be manually powered on and off. The 3490E Models C10, C11, and C22 are exceptions since these units are installed in 9406 feature racks (#5040, #5042) or 9309 Model 2 rack Enclosure with either Specify Code #9141 or #9171.

3490 and 3490 Automatic Cartridge Loader (ACL) is supported in manual or auto mode, not system mode.

The ASSIGN function of the 3480, 3490, and 3490E Magnetic Tape Subsystem is not supported by the #2622 attachment during the installation of AS/400 Licensed Internal Code, but is supported by the OS/400 operating system.

The 3480 and 3490 except for 3490E Models C10, C11, C22, D41, and D42, are intended for use in dedicated computer rooms with or without raised floors. The noise levels exceed those typically associated with equipment installed in a general office area.

Feature #2622 supports a data transfer rate of up to 3.0MB/sec.

One of the following specify codes can be entered on the 9404 order to describe which tape drive will be used for alternate IPL device:

One of the following specify codes is required when migrating 3490E CXX tape drives to a 9404 system:

(#2644) 3490 Magnetic Tape Subsystem Attachment/HP

(For IBM US, No Longer Available as of March 31, 1999)

The 3490 Magnetic Tape Subsystem Attachment/HP provides for attachment of one of the following Magnetic Tape Subsystem to all 9404 models.

The 3490 Magnetic Tape Subsystem Attachment/HP is designed to offer higher performance than feature #2622. The 3490 Magnetic Tape Subsystem Attachment/HP supports attachment of up to sixteen 3490E/3490/3480 tape drives, or up to four 3430/3422 tape drives. This feature provides a hardware data compression function for use with all tape drives listed above. The hardware data compression function can increase the effective media capacity by up to two times, depending on the data. AS/400 data compression on 1/2-inch reel-to-reel tapes are compatible with System/38 data compression on 3422/3430 tapes. This feature supports IDRC for a 3480, 3490 or 3490E Magnetic Tape Subsystem. IDRC can increase the effective media capacity by up to three times, depending on the data. The Hardware Data Compression (HDC) function can be used in conjunction with IDRC in the drive, but does not necessarily result in greater data compression. The two channel switch feature on the 3422 A01 (#3005) and 3430 (RPQ) may be used with this feature.

This feature supports Alternate IPL (AIPL) from all 3490 or 3490E models, including B02 and B20. Note that 9404 Models D25, EXX and FXX only support AIPL with this feature. Also, the ASSIGN function of the 3480, 3490 and 3490E Magnetic Tape Subsystem is supported during the installation of AS/400 Licensed Internal Code (LIC) and OS/400.

Not all cables are supplied with this feature and may need to be ordered separately.

·         Attachment of the 3430, 3422, 3480 or 3490/3490E Models AXX/BXX/DXX tape drives requires the use of the External Channel (Bus/Tag) cables. The #2644 feature requires an IOP adapter cable, feature #9980, for External Channel cable attachments. The External Channel cables must be ordered separately. For cable ordering information see Physical Planning Manual GC22-7064.

I/O Card Slots Used: One. Maximum: See the Magnetic Tape Attachment Table.

·         Power control is not provided for attached tape drives or libraries. They must be operated in "local" power control mode and be manually powered on and off. The 3490E Models C10, C11 and C22 are installed in 9406 feature racks (#5040, #5042) or 9309 Model 2 rack enclosures with either Specify Code #9141 or #9171.

Field installation: Yes. Maximum: See the Magnetic Tape Attachment Table.

(#2647) 9348 Model 2 Magnetic Tape Unit Attachment

(For IBM US, No Longer Available as of July 31, 1996)

This feature provides for attachment of one or two 9348 Model 2 Magnetic Tape Units to the 9404 B and C models. Alternate IPL is not supported with this feature.

This feature is supported in the 9404 D, E, and F models, but is not orderable as a new feature. See feature #2621 for D, E, and F models.

Card slots used: One. Maximum: See the Magnetic Tape Attachment Table.

(#6501) Tape/Disk Device Controller

(For IBM US, No Longer Available as of July 31, 2001)

This feature is an I/O processor that is used to attach external tape devices and DASD using SCSI interface.

On 9404 D, E and F models, this feature provides for attachment of the 3490 Model E01 1/2-inch Cartridge Tape Subsystem.

Each #6501 feature provides for attachment of up to two 3490 devices. The maximum number of tape devices supported is dependent on the system type and the number of other external tapes attached. The maximum number of #6501 features that can be installed to support tape is two. Card slots required: One.

Magnetic Tape Attachment Table

The maximum number of Tape IOPs is as follows:

 

FC #2621   B10 B20 C10 C20 C25 DXX EXX F10 F20 F25

--------   --- --- --- --- --- --- --- --- --- ---

System      1   1   1   1   1   1   2   2   2   2

Exp Unit    0   1   0   1   1   1   2   2   2   2

--------   --- --- --- --- --- --- --- --- --- ---

Sys Max     1   1   1   2   2   2   2   2   4   4

FC #2622   B10 B20 C10 C20 C25 DXX EXX F10 F20 F25

--------   --- --- --- --- --- --- --- --- --- ---

System      1   1   1   1   1   1   1   1   1   1

Exp Unit    0   1   0   1   1   1   1   1   1   1

--------   --- --- --- --- --- --- --- --- --- ---

Sys Max     1   1   1   1   1   1   1   1   1   1

FC #2644   B10 B20 C10 C20 C25 DXX EXX F10 F20 F25

--------   --- --- --- --- --- --- --- --- --- ---

System      1   1   1   1   1   1   1   1   1   1

Exp Unit    0   1   0   1   1   1   1   1   1   1

--------   --- --- --- --- --- --- --- --- --- ---

Sys Max     1   2   1   2   2   2   2   2   2   2

FC #2647   B10 B20 C10 C20 C25 DXX EXX F10 F20 F25

--------   --- --- --- --- --- --- --- --- --- ---

System      1   1   1   1   1   1   2   2   2   2

Exp Unit    0   1   0   1   1   1   2   2   2   2

--------   --- --- --- --- --- --- --- --- --- ---

Sys Max     1   2   1   2   2   2   2   2   2   2

--------   --- --- --- --- --- --- --- --- --- ---

FC #6501   B10 B20 C10 C20 C25 DXX EXX F10 F20 F25

--------   --- --- --- --- --- --- --- --- --- ---

System      0   0   0   0   0   1   1   1   1   1

Exp Unit    0   0   0   0   0   1   1   1   1   1

--------   --- --- --- --- --- --- --- --- --- ---

Sys Max     0   0   0   0   0   2   2   2   2   2

--------   --- --- --- --- --- --- --- --- --- ---

Max All     1   2   1   2   2   2   2   2   4   4

Note: Maximum number of feature #2622 plus 2644

plus 6501 must not exceed two.

 

Workstation Features

(#6050, #9050) Enhanced Twinaxial Workstation Controller

(For #6050 for IBM US, No Longer Available as of May 31, 2001)

(For IBM US, #9050 No Longer Available as of August 31, 1998)

This enhanced, combined workstation controller and adapter offers higher performance and more on-card memory than feature #6140. One eight-port workstation attachment is provided to support up to 40 additional 5250-type displays or printers with a maximum of seven devices per port. This controller contains additional memory which allows support of the graphical 5250 display data stream extensions and entry field 5250 display data stream extensions. The #6050 workstation controller supports customizing of keyboard translation and printer definition tables. Both SCS and IPDS data streams are supported. OS/400 Version 2 Release 2 or later is required to support this feature. Specify #9050 for the base Enhanced Twinaxial Workstation Controller and order feature #6050 for additional twinaxial controllers. Feature #6050 is supported on the 9404 B, C, D, E, and F models. I/O Card Slots Used: One. Maximums: See Workstation Configuration Table.

(#6054, #8054, #9054) Workstation Adapter

(For IBM US, No Longer Available as of March 31, 1997)

The #6054/#8054/#9054 Workstation Adapter feature provides an alternative workstation attachment architecture to the currently supported twinaxial and ASCII interfaces. The Workstation Adapter feature is supported on all 9404 D, E and F models.

LocalTalk(1) networking was developed by Apple Computer, Inc., to connect multiple local workstations via an easily configurable bus network. Physically, each workstation is connected to the LocalTalk shielded twisted-pair cable network by a connector box. A LocalTalk network can support up to 32 devices. Devices include Macintosh personal computers, Macintosh printers, LocalTalk compatible devices and the IBM Workstation Adapter feature. The maximum length of a LocalTalk network is 300 meters (988 feet). The maximum speed of the LocalTalk network is 230.4Kbps.

LocalTalk workstation networking is supervised by portions of the AppleTalk protocol. OS/400 Version 2 Release 3 or later supports attached devices as local 5250 workstations. The program SNA*ps 5250 Emulator Version 1.2, is required on the Macintosh workstation. Although each network can physically connect 32 devices, including the Workstation on Adapter, the recommended performance limitation is 20 active sessions.

The Workstation Adapter feature is packaged on a standard daughter card and attaches as feature #8054 or #9054 to the MFIOP or as feature #6054 to the Six-Line Communications Controller (#2623). Each Workstation Adapter feature is shipped with a connector box and a two- foot cable, used to attach it to a LocalTalk cable network.

Feature #8054/#9054 supports attachment of an Apple Macintosh as the system console except on the Models D10 and D20. When attached to the MFIOP the #8054/#9054 is co-resident with the standard ECS adapter.

One Workstation Adapter is supported on the Six-Line Communications Controller. A second adapter on the controller may only be an X.21, EIA 232/V.24 or V.35 communication adapter. The third of three adapter positions must not be used.

Feature #8054 should be ordered when LocalTalk is desired for the system console and feature #9050, base Twinaxial Workstation Controller or #9041, base ASCII Workstation Controller were selected. Feature #9054 should be ordered when LocalTalk is desired for the system console and no additional twinaxial or ASCII workstation controllers are desired.

The number of #6054/#8054/#9054 features supported by model is listed in the Workstation Configuration Table. of Apple Computer, Inc.

(#6140, #9140) Twinaxial Workstation Controller

(For IBM US, No Longer Available as of July 31, 1996)

The Twinaxial Workstation Controller is a combined workstation controller and workstation adapter for attaching 5250-type displays and printers to the 9404. A total of eight ports are provided with this card. Up to 40 5250 type displays or printers may be supported with a maximum of seven devices per port. Features #6140 and #9140 support customizing of keyboard translation and printer definition tables when running with OS/400 Version 2 Release 2. Feature #6140 is an optional twinaxial workstation controller. Feature #9140 is the base twinaxial workstation controller specify code. Card slots used: One. Maximums: See Workstation Configuration Table.

(#6141, #9141) ASCII Workstation Controller

(For IBM US, No Longer Available as of March 31, 1999)

The ASCII Workstation Controller is a combined workstation controller and workstation adapter for attaching selected ASCII displays and printers to the 9404. The ASCII Workstation Controller can support up to 18 ASCII devices. A 6-port workstation attachment is supplied with the ASCII controller. The ASCII 12-port workstation attachment, feature #6142, also attaches to the workstation controller and provides an additional 12 ports. Host graphics are not supported on devices attached to this controller. Both features #6141 and #9141 support customizing of keyboard translation tables when running with OS/400 Version 2 Release 2.

With AS/400 PC Support you can attach a graphics-capable DOS-based PC to the ASCII workstation controller and use host graphics (i.e., it is transparent to the ASCII WCS; it is just passing data between BGU and the DOS PC).

Either EIA 232 (CCITT V.24/V.28) or EIA 422-A (CCITT V.11) interfaces are supported from any of the ASCII ports at speeds up to 38,400bps. For specific information about these interfaces see the "AS/400 Planning Guide - 9404" (GA21-9914) and the "ASCII Workstation Reference" manual (SA21-9922). The EIA 422-A interface allows local attachment of devices from up to 4,000 feet (1200 meters). The EIA 232 interface allows either local attachment of devices from up to 50 feet (15 meters) or remote attachment via modems. Devices are supported via point-to-point asynchronous duplex modems which may be switched or nonswitched at speeds up to 19,200 bps. The data buffering capability of asynchronous modems or multiplexors is not supported.

The following IBM modems (or equivalent) are supported in asynchronous mode:

Card slots used: One Maximums: See Workstation Configuration Table.

(#6142) ASCII 12-Port Workstation Attachment

The ASCII 12-Port Workstation Attachment plugs into the ASCII Workstation Controller providing an additional 12 ports to the six provided with the ASCII Workstation Controller feature (#6141). Card slots used: None. Maximum: One per ASCII Workstation Controller.

Workstation Configuration Table

Maximum of the above workstation controllers (#6050, #6140, #6141, #9050, #9140, #9141, #6054, #9054, and #8054) supported by model:

 

           System Unit Maximums             Expansion Unit Maximums

         Twinax ASCII L-Talk Total         Twinax ASCII  L-Talk Total

         ------ ----- ------ -----         ------ ------ ------ -----

C10        1      2     0      3              0     0      0      0

C20/25     1      2     0      3              1     2      0      3

 

                    Total System Maximums

                   Twinax ASCII L-Talk Total

                   ------- ---- ------ -----

C10                  1     2     0       3

C20/25               2     4     0       6

 

Communications

Communications Function

The 9404 offers a wide variety of communications and connectivity functions. Multiple networks, SNA, X.25, X.21, Token-Ring, FDDI, Ethernet, and ISDN are available with connectivity provided by multiple protocols: ASYNC, BSC, SDLC, IDLC, X.25, X.21 Short Hold Mode/ Multiple Port Sharing function and Frame Relay. Multiple environments are also available: AS/400 as a host to personal computers and other AS/400s, System/36s and System 38s, AS/400 as a peer system to other AS/400s, System/36s, System/38s and other IBM peer systems; and AS/400 as a remote system in a System/370 controlled network.

Using appropriate T1 (US), E1 (Europe) or J1 (Japan) DCE (Multiplexor or DSU/CSU), the 9404 supports SDLC data lines at speeds up to 2.048 Mbps.

The 9404 will communicate via the EIA 232/V.24 and V.35 adapters through a 9751 CBX, ROLM CBX 8000 and ROLM CBX 9000 using Data Communications Module (DCM). Additionally, a Data Terminal Interface (DTI) is supported for EIA 232/V.24 asynchronous connections through the ROLM CBX 8000 and ROLM CBX 9000.

The following is a list of current IBM systems and modems that may be attached to the 9404:

·         IBM Systems

o        AS/400, 9402, 9404, 9406

o        3090, 308x, 43xx, 9370, System/390, ES9000

o        System/36, System/38, System/6000, Series/1,System/88

o        Personal Computers XT*, XT-286, AT**, Personal System/2* and 6150 RT

Communications Controllers and Adapters

Hardware communications controllers and line adapters, available as standard and optional features on the 9404, provide for the attachment of public and private communications facilities to the 9404 using modem equipment. Each line adapter is comprised of an adapter card and communications cable for modem attachment. The line adapters are installed on the communications controller. Each Six-Line Communications Controller plugs into an I/O card slot of the 9404 System Unit or System Unit Expansion. The Multi-Function I/O Processor has an integrated two- line controller function as a standard feature of the 9404 System Unit.

The number of Six-Line Communications Controllers that can be installed (D, E, and F models) depends on the number of I/O card slots available and the following line limitation:

Maximum Communications Lines by Model

 

                                                     Max

                                                     2623

             Total   Total   Max T1/E1/J1 Lines (3)    +     Max other

             Comm    Hi Spd       <  or =            2666   High Speed

Model        Lines   Lines   384Kbps 512Kbps 640Kbps  (2)    Lines (1)

----------   -----   ------  ------- ------- ------- -----   --------

    C10        8       2        0       0       0      0         2

    C20/C25   14       2        0       0       0      0         2

 

Notes:

1. These are X.21/V.35/ISDN lines which support BSC, X.25,

   IDLC and SDLC at speeds greater than 19.2Kbps

   up through 64Kbps.  An ISDN adapter is

   counted as two lines when determining the number of lines supported.

2. This is the combined number of #2666 and #2623

   features supporting T1/E1/J1 speeds.

3. The Six-Line Communications Controller (#2623)

   supports up to three V.35 SDLC data lines for

   attachment to T1/E1/J1 facilities through appropriate

   Data Communications Equipment (DCE).

   Per controller (#2623) support:

    - One V.35 SDLC data line operating at speeds up to 640Kbps

    - Two V.35 SDLC data lines operating at speeds up to 512Kbps

    - Three V.35 SDLC data lines operating at speeds up to 384Kbps

 

Communications Controllers

9404 Multi-Function I/O Processor

The Multi-Function I/O Processor and one EIA 232/V.24 one-line communications adapter are standard features of the 9404 system unit. In addition to DASD, Diskette, and tape unit, the Multi-Function I/O Processor supports two communication lines.

The standard EIA 232/V.24 one-line adapter is provided for use with the IBM electronic customer support facility on the first communication line. This adapter is equipped with an enhanced cable that provides attachment to an IBM 5853, 7855, or equivalent modem. The first line supports switched line facilities operating at 2,400 bps or 9,600 bps using SDLC protocol. Electronic customer support leased facilities may operate at speeds up to 19,200 bps on the first line; 9,600 bps using the IBM 7855 modem. Specify cable length for EIA 232/V.24 adapter standard feature:

A remote power-on capability designed so that the system can be powered on via a telephone call to the IBM 5853 or 7855 electronic customer support modem is supported only on the first line. V.32 modems other than the IBM 7855 modem have not been tested and may not operate with the remote power-on capability.

The maximum aggregate data rate of the Multi-Function I/O Processor for its two communications lines is 21,600 bps for the D10 and D20 models, and 83,200 bps for the D25 and all E and F models. The concurrent operation of ASYNC, BSC, SDLC, and X.25 protocols and the X.21 Short Hold Mode function are supported. ASYNC, BSC, and SDLC line speeds up to 19,200 bps are supported on the D10 and D20 models. X.25 line speeds are supported up to 9,600 bps on the D10 and D20 models. ASYNC, BSC, and X.25 line speeds up to 19,200 bps are supported on the D25 and all E and F models. SDLC line speeds are supported up to 64Kbps on the D25 and all E and F models. (Full duplex line speeds should be doubled for calculating aggregate line speed. X.25 operation is full duplex. ASYNC operation may be full duplex.)

Optional EIA 232/V.24, V.35 or X.21 one-line adapters are available (see following descriptions). One optional adapter may be attached to the standard Multi-Function I/O Processor.

The following MFIOP communications limits apply to all models:

·         X.25 support:

o        Up to 16 Virtual Circuits

o        Up to 4 controllers (per line)

(#6150) Three-Line Communications Controller

(For IBM US, No Longer Available as of July 31, 1996)

The Three-Line Communications Controller (TLCC) is a special feature for the 9404 B and C model system units and a supported migration feature on the D, E, and F model system units. It is an input/output processor that provides the basic control and common circuits for one, two, or three communication lines. The concurrent operation of ASYNC, BSC, SDLC, and X.25 protocols; and the SDLC X.21 Short Hold Mode function are supported. The maximum aggregate data rate for the TLCC is 192,000 bps. Card slots used: One. Maximum: Four. Two in the System Unit and four with an Expansion Unit.

(#2623) Six-Line Communications Controller

(For IBM US, No Longer Available as of March 31, 1999)

The Six-Line Communications Controller is a special feature of the 9404 D, E and F model system unit and is an input/output processor that provides the basic control and common circuits for up to six communication lines. The concurrent operation of ASYNC, BSC SDLC, and X.25 protocols; and the SDLC X.21 Short Hold Mode (SHM) function are supported. A per controller maximum of ninety-six X.25 virtual circuits is supported with a maximum of 64 virtual circuits on any line. X.21, V.35, and EIA 232/V.24 adapters are supported. ISDN is also supported but may not attach to a Six-Line Communications Controller that also contains EIA 232/V.24, X.21, or /V.35 adapters. ISDN lines are full duplex.

One Workstation Adapter (for LocalTalk) is supported on the Six-Line Communications Controller. A second adapter on the controller may only be an X.25, EIA 232/V.24 or V.35 communications adapter. The third adapter position must not be used. X.25 is limited to a maximum of 32 virtual circuits when it shares a Six-Line Communications Controller with a LocalTalk Workstation Adapter.

Using appropriate Data Communications Equipment (DCE) which multiplexes one or more V.35 lines onto a T1/J1 line (1.544Mbps digital link) or E1 line (2.048Mbps digital link), up to three V.35 SDLC data lines per Six-Line Communications Controller are supported for attachment to T1/E1/J1 DCE.

Per controller support:

EIA 232/V.24, X.21, ISDN adapter type, and V.35 lines operating BSC or X.25 protocols are not supported for concurrent operation with V.35 SDLC data lines using T1/E1/J1 DCE on the same controller. Additional Six-Line Communications Controllers may need to be ordered for V.35 SDLC data lines using T1/E1/J1 DCE.

The aggregate line speed per controller for non V.35 SDLC data lines using T1/E1/J1 DCE is 384Kbps. (Double full duplex line speeds when calculating aggregate line speeds. Full duplex is standard for X.25 lines and may be required for ASYNC lines.)

Card slots used: One. Maximum: See table below.

 

                 System Unit       Expansion Unit         Maximum

 

D Models               2                    3                4

E Models               4                    5                9

F Models               4                    5                9

 

Maximum number of high speed 48Kbps or greater lines including V.35 SDLC data line attached to T1/E1/J1 DCE: Four on any D, E, or F model

Communications Adapters

(#6154, #6174, #6155, #6175) EIA 232/V.24 One-Line Adapters

(D, E, and F models only)

Each feature consists of an adapter and cable used to support one communication line using either ASYNC, BSC, SDLC or X.25 protocol. Line speeds up to 19,200 bps using ASYNC, BSC or SDLC protocol and up to 9,600 bps using X.25 protocol are supported. This adapter attaches to the Three-Line Communications Controller (TLCC) or to the Multi-Function I/O Processor (MFIOP). Card slots used: One on the TLCC, One on the MFIOP. Maximum: Three on the TLCC, One on the MFIOP. Prerequisite: MFIOP or TLCC.

Select feature number for adapter and required cable:

(#6154 and #6174 are not recommended for use with modem equipment that has the "signal quality detect" feature.)

(#6155 and #6175 are recommended for use with any modem eliminator or a modem that has a feature known as "signal quality detect" and does not implement CCITT V.54 loop 2 and loop 3 tests on interface pins 21 and 18.)

(#6152) EIA 232/V.24 Adapter

(For IBM US, No Longer Available as of July 31, 1996)

This feature consists of an adapter and cable used to support one communication line using either ASYNC, BSC, SDLC, or X.25 protocol. Line speeds up to 19,200bps are supported. This adapter attaches to the prerequisite Three-Line Communications Controller (TLCC) (#6150) or the Multi-Function I/O Processor (MFIOP). The adapter does not use any card slots. Three adapters are supported on the (TLCC); two on the MFIOP. This feature cannot be ordered for the 9404 D, E, and F models. One adapter feature and cable are standard for use with electronic customer support. For cable, specify either the EIA 232/V.24 Cable (#9022) or the EIA 232/V.24 Enhanced Cable (#9023). See Specify section of the sales manual for details.

(#6151, #6171) X.21 One-Line Adapters

(For IBM US, No Longer Available as of August 31, 1998)

Each feature consists of an adapter and cable used to attach one communication line to an X.21 or X.25 network. This adapter attaches to the Multi-Function I/O Processor (MFIOP) or the Three-Line Communications Controller (TLCC) (#6151). Line speeds up to 19,200 bps using SDLC protocol and up to 9,600 bps using X.25 protocol are supported on the MFIOP. Line speeds up to 64Kbps are supported when attached to the TLCC. Card slots used: None. Maximum: One on the MFIOP, three on the TLCC. Prerequisite: MFIOP or TLCC (#6150).

Select feature number for adapter and required cable:

(#2656, #2659) X.21 Two-line Adapters

(For IBM US, #2656 No Longer Available as of August 31, 1998)

This feature consists of an adapter, one 10-foot, two-connector stub cable, and two communication cables used to support two communication lines to an X.21 or X.25 network. Line speeds up to 64Kbps are supported using SDLC and X.25 protocols; and the X.21 short hold mode function. This adapter attaches to the Six-Line Communications Controller. Card slots used: None. Maximum: Three per controller. Prerequisite: Six-Line Communications Controller (#2623). Select feature number for adapter and required cables:

(#6153, #6173) V.35 One-Line Adapters

(For IBM US, No Longer Available as of August 31, 1998)

Each feature consists of an adapter and cable that is used to support one communication line. Line speeds up to 64Kbps using BSC, SDLC, and X.25 are supported. Speeds up to 640Kbps are supported on the V.35 adapter for SDLC data lines using T1/E1/J1 DCE when attached to the Six-line Communications Controller. Maximum high speed (48K to 64Kbps) lines: Four on any D, E, and F model. One on B and C models. This adapter attaches to the Six-Line Communications Controller or the TLCC and the MFIOP on the E models. Card slots used: None. Maximum: Three per controller for E and F models; one for B, C, and D models. Prerequisite: Six-Line Communications Controller (#2623) or TLCC (#6150) Select feature number for adapter and required Cable:

640Kbps SDLC Data Line Support

Using appropriate T1/E1/J1 Data Communication Equipment (DCE) (multiplexor or DSU/CSU), the Six-Line Communications Controller (#2623) with attached V.35 One-Line adapters (#6153, #6173) supports SDLC data lines at speeds up to:

64Kbps Switched V.35 SDLC Support

Using appropriate Data Communications Equipment, the MFIOP and the Six-Line Communications Controller(#2623) with attached V.35 One-Line Adapters(#6153 and #6173) supports switched line SDLC capability at speeds up to 64Kbps. This support is available with Version 3 Release 1 of OS/400.

(#2605) ISDN Basic Rate Interface Adapter

(For IBM US, No Longer Available as of March 31, 1999)

This feature consists of an adapter card and 20 foot cable used to attach the system to an ISDN network. Each adapter supports two 64Kbps 'B' channels and one 16Kbps 'D' channel. ISDN lines are full duplex. This adapter attaches to the prerequisite Six-line Communications Controller.

Attachment of X.25 Packet Switched Networks is also supported using an ISDN B channel as the access facility. The AS/400 will support two X.25 network access types:

Up to 4096 byte packets are supported.

Two #2605 features may be attached per #2623 Six-Line Communications Controller. The IDLC protocol is supported. This adapter may not attach to a Six-Line Communications Controller that also attaches EIA 232/V.24, X.21, or V.35 adapters. Refer to "AS/400 Communications: Integrated Services Digital Network Guide Version 2.0" (SC41-0003) for additional information. This feature is supported on the 9404 D, E, and F models only.

Combination Controller/Adapters

(#2666) High Speed Communications Adapter

(For IBM US, No Longer Available as of August 31, 1998)

This feature provides the AS/400 system with one communications port capable of T1/J1 (1.544Mbps) or E1 (2.048Mbps) speeds. Communication over public or private Frame Relay or X.25 Networks or over point-to- point non-switched SDLC lines is possible. Feature #2666 consists of a card, a wrap connector and Licensed Internal Code. Three physical interface types are offered for connection to external Data Communications Equipment (DCE) such as Data Service Units (DSU), Channel Service Units (CSU) or multiplexers, which in turn provide connection to the communication facilities.

The physical interfaces are:

The cable type plugged into the adapter and OS/400 configuration parameters determine which of the three interfaces will be used. One of the following cables must be specified when ordering feature #2666:

Note 1: Use of this 24.4 meter (80 foot) V.35 cable restricts the maximum line speed to 64Kbps.

Note 2: Use of these longer cables requires that the attaching Data Communications Equipment (DCE) support the V.36 transmitter signal element timing Data Terminal Equipment (DTE) source signal.

If, after initial installation a change of interface type or cable length is desired, a separate cable may be ordered.

The High Speed Communications Adapter supports Frame Relay, X.25 or SDLC protocols. The specific protocol to be used is selected by OS/400 configuration commands. The Frame Relay, X.25 or SDLC code is then loaded into the adapter when the line is enabled.

The Frame Relay code load supports up to 256 permanent virtual circuits on the 9406, through one physical port. The virtual circuits can be individually configured for the following types of connections:

Logical Link Control (LLC) IEEE 802.2/ISO 8802.2 Type I (connectionless) and Type II (connection-oriented) services, provided by the Frame Relay code, allow TCP/IP and SNA sessions over these connections. Source Route Bridging function allows products on a remote Token-Ring, FDDI or SDDI LAN to communicate with the AS/400 through a remote bridge. Transparent Bridging is employed for the remote Ethernet and IEEE 802.3 LAN connections. AS/400 feature #2666 interoperates with IBM RouteXpander/2 and the IBM 6611 Network Processor for bridged connections to remote Token-Ring LANs. Interoperation with the IBM 6611 also provides a bridged connection to remote IEEE 802.3 and Ethernet Version 2 LANs. TCP/IP Forum RFC 1490 (Request For Comment - Multiprotocol Connect over Frame Relay) defines the industry standard formats used to facilitate this bridged interoperation. Support of these formats allows the High Speed Communications Adapter to also interoperate with other industry standard bridges.

Frame Relay Standards: Frame Relay functions of the High Speed Communications Adapter feature are implemented in accordance with these standards:

The SDLC code load supports non-switched communications over any of the three possible interfaces (V.35, V.36/EIA 449 or X.21).

The X.25 code load supports up to 64 virtual circuits over any of the three possible interfaces (V.35, V.36/EIA 449 or X.21).

Frame Relay and SDLC functions require OS/400 Version 2 Release 3 or later. X.25 function requires OS/400 Version 3 Release 1 or later. I/O Card Slots Used: One. Maximums: Two on Models D10, D20, D25, E10, E20, E25, F10 and F20. Four on Model F25.

Refer to IBM publication SC41-0004 "IBM Application System/400 Communications: Local Area Network Guide", for an introduction to Frame Relay, AS/400 implementation, Configurations, addressing considerations, interfaces and Frame Relay examples.

LAN Adapters

(#2618) Fiber Distributed Data Interface Adapter

(For IBM US, No Longer Available as of August 31, 1998)

This feature provides one interface to connect an AS/400 System to an FDDI LAN which complies with ANSI X3T9.5 and ISO 9314 standards. Feature #2618 consists of a card, a wrap connector and Licensed Internal Code which supplies IEEE 802.2 Logical Link Control (LLC), ANSI X3T9.5/ISO 9314 Media Access Control (MAC) functions, and ANSI X3T9.5 Station Management (SMT) functions (draft version 7.2 level which is compatible with version 6.2). OS/400 configuration parameters are used to select whether the adapter operates as a Single Attach Station (SAS), a Dual Attach Station (DAS) or a dual-homing station. An interface is provided which can be used to connect through and control an optical bypass switch. A maximum frame size of 4K bytes is supported. OS/400 Version 2 Release 3 or later is required, which provides support for SNA communications.

Refer to IBM publication GA27-3892, "IBM FDDI Network Introduction and Planning Guide", for an introduction to FDDI concepts, descriptions of IBM FDDI components and information for planning and installing IBM FDDI networks on optical fiber media.

I/O Card Slots Used: One. Maximums: One on Models D10, D20, D25, E10, E20, E25, F10, F20, and F25. Refer to 9404 LAN Feature Summary Chart.

Cables: The FDDI Adapter requires multi-mode (62.5/125 micron) FDDI optical fiber jumper cables to connect the adapter into the FDDI ring. These jumper cables are not provided with this feature. Jumper cables are the responsibility of the customer and may be ordered from your local authorized IBM cabling distributor. For more information about the jumper cables, planning, design, and installation of optical fiber cabling systems, refer to IBM publication GA27-3943, "IBM Cabling System Optical Fiber Installation and Planning Guide."

(#2665) Shielded Twisted-Pair Distributed Data Interface Adapter

(For IBM US, No Longer Available as of July 1, 1997)

(This feature cannot be ordered until March 30, 1993.)

This feature provides one interface to connect an AS/400 System to an FDDI LAN which is constructed of IBM Cabling System Type 1, 2, 6, or 9 shielded twisted-pair wiring. Feature #2665 consists of a card, a wrap connector and Licensed Internal Code which supplies IEEE 802.2 Logical Link Control (LLC), ANSI X3T9.5/ISO 9314 Media Access Control (MAC) functions, and ANSI X3T9.5 Station Management (SMT) functions (draft version 7.2 level which is compatible with version 6.2). OS/400 configuration parameters are used to select whether the adapter operates as a Single Attach Station (SAS), a Dual Attach Station (DAS) or a dual- homing station. A maximum frame size of 4K bytes is supported. OS/400 Version 2 Release 3 or later is required, which provides support for SNA communications.

Refer to IBM publication GA27-3892, "IBM FDDI Network Introduction and Planning Guide", for an introduction to FDDI concepts, descriptions of IBM FDDI components and information for planning and installing IBM FDDI networks on shielded twisted-pair copper media.

I/O Card Slots Used: One. Maximums: One on Models D10, D20, D25, E10, E20, E25, F10, F20, and F25. Refer to 9404 LAN Feature Summary Chart.

Cables: The SDDI Adapter requires IBM FDDI copper jumper cables to connect the adapter into the FDDI ring. These jumper cables are not provided with this feature. Jumper cables are the responsibility of the customer and may be ordered from your local authorized IBM cabling distributor. For more information about the jumper cables, planning, design, and installation of FDDI networks, refer to IBM publication GA27-3892, "IBM FDDI Network Introduction and Planning Guide."

(#2619) 16/4Mbps Token-Ring Network Adapter/HP

(For IBM US, No Longer Available as of March 31, 1999)

The 16/4Mbps Token-Ring Network Adapter/HP feature provides a single attachment to either a 16Mbps or a 4Mbps IBM Token-Ring Network. The feature consists of an adapter card, internal code which supplies IEEE 802.5 Media Access Control (MAC) and IEEE 802.2 Logical Link Control (LLC) functions, and an external 2.5 meter (8 foot) cable. The standard IBM Cabling System patch cables can increase the length where necessary.

OS/400 configuration parameters are used to select either the 16 or 4Mbps rate. Early token release can be enabled or disabled when the 16Mbps rate is selected. These controls allow the customer to easily migrate from a 4 to a 16Mbps Token-Ring Network.

Feature #2619 is functionally equivalent to feature #2626. Feature #2619 is based on a faster microprocessor, providing up to three times the throughput of feature #2626. A maximum frame size of up to 16K bytes is supported. Support of OS/400 Version 2 Release 2 or later is required.

I/O Card Slots Used: One. Maximums: Two on the D models (one in the system unit and one in the expansion unit) and two on the Models E10, F10 and E20 (one or two in the system unit and one or two in the expansion unit to a maximum of two). Three on the Model E25 (one or two in the system unit and one or two in the expansion unit to a maximum of three). Four on the Models F20 and F25 (one or two in the system unit and one or two in the expansion unit to a maximum of four). Refer to the LAN Feature Summary table.

Cables: One Token-Ring Network attachment 2.5 meter (8-foot) cable.

(#2626) 16/4Mbps Token-Ring Network Adapter/A

(For IBM US, No Longer Available as of July 1, 1997)

The 16/4Mbps Token-Ring Network Adapter/A feature provides a single attachment to either a 16Mbps or a 4Mbps IBM Token-Ring Network for 9404 D, E, and F models . The feature consists of an adapter card, internal code which supplies IEEE 802.5 Media Access Control (MAC) and IEEE 802.2 Logical Link Control (LLC) functions, and an external 2.5 meter (8 foot) cable. The standard IBM Cabling System patch cables can increase the length where necessary.

OS/400 configuration parameters are used to select either the 16 or 4Mbps rate. Early token release can be enabled or disabled when the 16Mbps rate is selected. These controls allow the customer to easily migrate from a 4 to a 16Mbps Token-Ring Network.

Feature #2626 is functionally equivalent to feature #2636. Feature #2626 is based on a faster microprocessor, providing up to two times the throughput of feature #2636. A maximum frame size of up to 16K bytes is supported.

I/O Card Slots Used: One. Maximums: Two on the D models (one in the system unit and one in the expansion unit) and two on the Models E10, F10 and E20 (one or two in the system unit and one or two in the expansion unit to a maximum of two). Three on the Model E25 (one or two in the system unit and one or two in the expansion unit to a maximum of three). Four on the Models F20 and F25 (one or two in the system unit and one or two in the expansion unit to a maximum of four). Refer to the LAN Feature Summary table.

Cables: One Token-Ring Network attachment 2.5 meter (8-foot) cable.

(#2636) 16/4Mbps Token-Ring Network Adapter

The 16/4Mbps Token-Ring Network Adapter feature provides a single attachment to a 16Mbps or a 4Mbps IBM Token-Ring Network. The feature consists of an adapter card, internal code which supplies IEEE 802.5 Media Access Control (MAC) and IEEE 802.2 Logical Link Control (LLC) functions, and an external 2.5 meter (8 foot) cable. The standard IBM Cabling System can increase the length where necessary.

OS/400 configuration parameters are used to select either the 16Mbps or 4Mbps rate. Early Token Release can be enabled or disabled when the 16Mbps rate is selected. These controls allow the customer to easily migrate from a 4 to a 16Mbps IBM Token-Ring Network.

Feature #2636 is based on the same microprocessor as feature #6160. The adapter (#2636) supports a maximum frame size of up to 8KB. This increased frame size, along with other changes to the licensed internal code, provide improved performance during large file transfer operations. Short interactive workstation exchanges will see little response time improvement over the 4Mbps IBM Token-Ring Network Adapter (#6160).

I/O Card Slots Used: One. Maximums: Two on the D models (one in the system unit and one in the expansion unit) and two on the Models E10, F10 and E20 (one or two in the system unit and one or two in the expansion unit to a maximum of two). Three on the Model E25 (one or two in the system unit and one or two in the expansion unit to a maximum of three). Four on the Models F20 and F25 (one or two in the system unit and one or two in the expansion unit to a maximum of four). Refer to the LAN Feature Summary table.

Cables: One Token-Ring Network attachment 2.5 meter (8-foot) cable.

(#6160) IBM Token-Ring Network Adapter

(Withdrawn from marketing)

The IBM Token-Ring Network Adapter feature provides a single attachment to a 4Mbps IBM Token-Ring Network. The feature consists of an adapter card, internal code which supplies IEEE 802.5 Media Access Control (MAC) and IEEE 802.2 Logical Link Control (LLC) functions, and an external 2.5 meter (8 foot) cable. The standard IBM Cabling System patch cables can increase the length where necessary. This adapter supports a maximum frame size of 2K bytes. This feature is supported on the D models as part of an upgrade but is not orderable as a new feature.

I/O Card Slots Used: One. Maximums: Two (one in the system unit and one in the Expansion Unit). Cables: One Token-Ring Network attachment 2.5 meter (8-foot) cable.

(#2617) Ethernet/IEEE 802.3 Adapter/HP

(For IBM US, No Longer Available as of March 31, 1999)

The Ethernet/IEEE 802.3 Adapter/HP provides a single attachment to one Carrier Sense Multiple Access/Collision Detect Local Area Network. Feature #2617 offers enhanced performance and additional function when compared to feature #2625. This High Performance adapter uses a faster microprocessor and additional memory to provide up to six times the throughput of feature #2625. Support of OS/400 Version 2 Release 2 or later required.

A 15-pin "D" connector provides a standard Attachment Unit Interface (AUI) for connection through an external transceiver. Transceivers which attach to 10Base-T (unshielded twisted pair), 10Base-2 (Thin Ethernet), and standard Ethernet coaxial media can be obtained from an Ethernet supplier.

The feature consists of an adapter card and internal code which supplies Ethernet version 2 and IEEE 802.3 Media Access Control (MAC) plus IEEE 802.2 Logical Link Control (LLC) functions. This adapter offers the customer a connection to Ethernet/IEEE 802.3 LANs, which support communications with both IBM and non-IBM products. Concurrent sessions with both Ethernet Version 2 and IEEE 802.3 stations are possible. These two CSMA/CD protocols are able to coexist on the same LAN but they can not communicate with each other. This concurrent session capability of feature #2617 allows the 9404 to support a customer's staged migration from Ethernet Version 2 to the newer IEEE/802.3 LAN.

I/O Card Slots Used: One. Maximums: Two on the D models (one in the system unit and one in the expansion unit) and two on the Models E10, F10 and E20 (one or two in the system unit and one or two in the expansion unit to a maximum of two). Three on the Model E25 (one or two in the system unit and one or two in the expansion unit to a maximum of three). Four on the Models F20 and F25 (one or two in the system unit and one or two in the expansion unit to a maximum of four). Refer to the LAN Feature Summary table.

Cables: The customer must procure the Attachment Unit Interface (AUI) cable which connects between the adapter and the Ethernet/IEEE 802.3 transceiver. This cable and the transceiver are not available from IBM, but can be obtained from an Ethernet supplier.

(#2625) Ethernet/IEEE 802.3 CSMA/CD LAN Adapter

(For IBM US, No Longer Available as of January 24, 1996)

The Ethernet/IEEE 802.3 CSMA/CD LAN Adapter feature provides a single attachment to one Carrier Sense Multiple Access/Collision Detect Local Area Network. The feature consists of an adapter card and internal code which supplies Ethernet Version 2 and IEEE 802.3 Media Access Control (MAC) plus IEEE 802.2 Logical Link Control (LLC) functions. This adapter offers the customer a connection to Ethernet/IEEE 802.3 LANs, which support communications with both OEM and IBM products. Concurrent sessions with both Ethernet Version 2 and IEEE 802.3 stations are possible. These two CSMA/CD protocols are able to coexist on the same LAN but they can not communicate with each other. This concurrent session capability of feature #2625 allows the 9404 to support a customer's staged migration from Ethernet Version 2 to the newer IEEE/802.3 LAN.

I/O Card Slots Used: One. Maximums: Two on the D models (one in the system unit and one in the expansion unit) and two on the Models E10, F10 and E20 (one or two in the system unit and one or two in the expansion unit to a maximum of two). Three on the Model E25 (one or two in the system unit and one or two in the expansion unit to a maximum of three). Four on the Models F20 and F25 (one or two in the system unit and one or two in the expansion unit to a maximum of four). Refer to the LAN Feature Summary table.

Cables: The customer must procure the Attachment Unit Interface (AUI) cable which connects between feature #2625 and the Ethernet/IEEE 802.3 transceiver. The AUI cable is not available from IBM, but can be obtained from an Ethernet supplier.

(#2663) I/O Attachment Processor

(For IBM US, No Longer Available as of August 31, 1998)

This feature provides the communications hardware base for the AS/400 Wireless LAN Adapter (#2668). The two features are integrated in a single hardware package to operate as a unit. Feature #2663 consists of a new I/O processor card that provides a connection to feature #2668. Operating System/400 Version 3 Release 1, or later, is required.

The I/O Attachment Processor is attached to AS/400 systems as a prerequisite for feature #2668. Refer to feature #2668 for usage guidelines and maximums.

I/O card slots required: One (shared with feature #2668).

Maximums: Refer to 9404 LAN Feature Summary table

(#2664) Integrated Fax Adapter

(For IBM US, No Longer Available as of December 31, 1999)

This feature provides the AS/400 with two ports capable of transmission and receipt of facsimile data to or from a Group 3 capable fax machine, another AS/400 with an Integrated Fax Adapter, or PCs with appropriately programmed fax adapters. Feature #2664 consists of a card, a wrap cable (one per machine), two country-unique attachment couplers, telephone cables and Licensed Internal Code.

The Integrated Fax Adapter is supported by the Facsimile Support/400* licensed program offering that, until now, supported only the PS/2 LAN-based facsimile product. This program provides configuration parameters for the Integrated Fax Adapter, schedules fax transmissions between multiple adapters, and manages sending and receiving faxes to and from the adapter.

The Integrated Fax Adapter can simultaneously support two send, two receive, or one send and one receive operation. To the AS/400 system, the Integrated Fax Adapter appears as an IPDS* (Intelligent Printer Data Stream) printer for outbound faxes. Most output, including text, image, graphics and bar codes that can be printed on an AS/400 IPDS printer can be faxed via the Integrated Fax Adapter. Double Byte Character Sets (DBCS) are supported for in-bound faxes, but not for out-bound faxes.

The Integrated Fax Adapter is designed to be directly attached to the Public Switched Telephone Network (PSTN). Attachment to a Private Branch Exchange (PBX) may give unsatisfactory results.

Feature #2664 supports the facsimile protocols defined in CCITT Blue Book Volume VII, Fasicle VII.3 Recommendations T.4 and T.30.

Documents transmitted from the AS/400 through the Integrated Fax Adapter are limited to a maximum of approximately 30 text pages per port, per phone call. If only a single port is configured for sending Fax documents, then the limit is raised to approximately 60 text pages. Resident cover pages are counted against this limit. Feature #2664 supports the following compression algorithms in fax mode:

Feature #2664 supports the following modem standards:

Initial country support includes: USA, Canada, France, United Kingdom, Germany, Italy, Japan and Sweden. Country support is subject to approval by that country. Two country-unique couplers and country- specific Public Switched Telephone Network (PSTN) attachment cables (one for each port), are required. The couplers and cables are included with the Integrated Fax Adapter feature.

OS/400 Version 3 Release 0.5, or later, and Facsimile Support/400 Version 3 Release 0.5, or later, or OS/400 Version 2 Release 3 and Facsimile Support/400 Version 2 Release 3, with PRPQ P84237 (5799-XBX) are required to support this feature.

Card slots used: One Maximum: Refer to System Unit Summary.

(#2668) AS/400 Wireless LAN Adapter

(For IBM US, No Longer Available as of August 31, 1998)

The AS/400 Wireless LAN Adapter provides wireless connectivity from AS/400 systems to workstations or other systems connected to a wireless LAN network. With a wireless LAN connection, end-users can have roaming, portable access to the information they need, wherever they are, within the area of local wireless radio coverage. In addition, the AS/400 Wireless LAN Adapter may be the preferred solution in situations where wiring is expensive or impossible or where computing resource and device layouts change periodically. Support is provided for portable and stationary PCs, for specialized hand-held devices used for data collection, and for connections between AS/400 systems.

The AS/400 Wireless LAN Adapter uses an advanced technology, direct sequence, spread-spectrum radio operating in the 2.4 to 2.4835GHz band. The operating band may be narrower in some countries to meet country regulations. Spread spectrum provides excellent resistance to interference from other radio frequency (RF) sources.

Availability of this feature in any particular country is dependent on current country radio frequency regulations and certification for use by the country.

The AS/400 Wireless LAN Adapter has not been approved by the Federal Communications Commission. This device is not, and may not be offered for sale or lease, or sold or leased until the approval of the FCC has been obtained.

Operation in the United States does not require a license from the Federal Communications Commission.

The AS/400 Wireless LAN Adapter comes with an antenna and a cable for connecting the antenna to the adapter. The area of coverage may be extended beyond the coverage provided by the antenna attached to the adapter by adding AS/400 Wireless LAN Access Points to the network via an unshielded twisted-pair wired backbone. In addition, access points may be connected without wires, acting as wireless repeaters. Each adapter or access point generates one cell of coverage area. Networks are designed to create overlapping cells to ensure consistent coverage of the area desired. The AS/400 Wireless LAN Adapter allows transparent seamless movement from cell to cell while maintaining a continuous host session. A site survey by trained professionals is recommended to assist in network design.

The AS/400 Wireless LAN Adapter operates with existing application software interfaces. Existing 5250 and LAN-oriented applications can use the AS/400 Wireless LAN Adapter without change.

The AS/400 Wireless LAN Adapter supports the AS/400 family of wireless LAN and data collection devices. This family of devices provides comprehensive connectivity solutions for attaching personal computers and data collection devices to the AS/400 in a mobile, wireless fashion. The AS/400 Wireless LAN Adapter also operates with the DATASPAN** 2.4GHz family of products from the Telxon Corporation. In addition to the AS/400 Wireless LAN Adapter, the following AS/400 wireless LAN networking devices are available from IBM:

The raw bit rate for the AS/400 Wireless LAN Adapter is 2Mbps, shared by all active devices in the network. The range covered by one cell in most office environments is from 100 to 300 feet in all directions, depending on the building structure, antenna type and antenna placement. Outdoors, with a clear line-of-sight between specialized antennas, a range of up to three miles may be achieved.

This feature consists of an I/O adapter card, an antenna and a coaxial cable to attach the antenna. The following cable and antenna choices are offered:

·         One of the following:

o        #9814 - 20-Foot Antenna Cable (For IBM US, No Longer Available as of August 31, 1998)

o        #9815 - 50-Foot Antenna Cable (For IBM US, No Longer Available as of August 31, 1998)

Feature #2663, I/O Attachment Processor, is a prerequisite to this feature. Support in OS/400 Version 3 Release 1, or later is required. I/O card slots used: One (shared with Feature #2663). Maximum per system: Refer to 9404 LAN Feature Summary table for feature # 2663.

(#6149) 16/4Mbps Token-Ring IOA

(For IBM US, No Longer Available as of May 31, 2001)

The 16/4Mbps Token-Ring IOA feature provides a single attachment to either a 16Mbps or a 4Mbps IBM Token-Ring network. The feature consists of an IOA card, internal code which supplies IEEE 802.5 Media Access Control (MAC) and IEEE 802.2 Logical Link Control (LLC) functions. The 16/4 Token-Ring IOA can operate in half-or full-duplex mode.

#6149 and #9249 come with a 2.44-meter (8-foot) token-ring cable. Alternatively, a customer supplied twisted-pair cable can attach to the RJ45 connection on the IOA. The standard IBM Cabling System patch cables can increase the length where necessary. This feature attaches only to the Integrated PC Server (#6616).

(#6181) Ethernet/IEEE 802.3 IOA

(For IBM US, No Longer Available as of July 31, 2001)

The Ethernet/IEEE 802.3 IOA provides a single attachment to one Carrier Sense Multiple Access/Collision Detect LAN. The feature consists of an adapter card and internal code that supplies Ethernet version 2 and IEEE 802.3 Media Access Control (MAC) plus IEEE 802.2 LLC functions. The Ethernet/IEEE 802.3 IOA can operate half-or full-duplex mode.

#6181 and #9381 have a RJ45 connector and a 15-pin D-Shell connector for attachment to customer-supplied RJ45 twisted-pair cable or AUI Ethernet cable. This feature attaches only to the Integrated PC Server (#6616).

File Server I/O Processor

The File Server I/O Processor (FSIOP), along with supporting AS/400 software, provides a high performance, client-centered file system. This file system provides access to client platforms such as OS/2, Windows and DOS attached to Token-Ring and Ethernet LANs. The file system can also be accessed by AS/400 host applications and provide LAN communications to AS/400 applications using TCP/IP and APPN.

The FSIOP can leverage OS/2 LAN server implementations to provide fast file serving performance on LANs. PC file serving performance on the AS/400 is increased up to eight times over previous AS/400 offerings.

The FSIOP consists of various initial order configurations that can be upgraded in the field using separate memory and second-port upgrade features. The following initial configuration features can be ordered on select 9404 D, E and F models:

The following features are available for upgrading the capability of File Server I/O Processors:

·         #6509 - Additional 16MB FSIOP Memory: From one to three features may be installed up to the FSIOP memory maximum of 64MB.

Each LAN port can be configured to support one of the following interfaces:

 

        Protocol                  Connector             Media

    --------------------        -------------      ---------------

    4/16Mbps Token-Ring         9-pin D-Shell            STP

    4/16Mbps Token-Ring            RJ45                  UTP

    10Mbps Ethernet             15-pin D-Shell      10Base5 / AUI

    10Mbps Ethernet             15-pin D-Shell      10Base2 / External

                                                             Transceiver

    10Mbps Ethernet                RJ45                10BaseT

 

Cables: One or two of the following LAN cables are included with the FSIOP and should be specified when ordering. One cable is included with a One-Port FSIOP and upgrade feature #6520. Two cables are included with the Two-Port FSIOPs. (Note: If using the RJ45 connection, a specify cable is not required.)

The File Server I/O Processor features require the support of OS/400 Version 3 Release 1.0, or later. Each FSIOP feature also requires the licensed program, LAN Server/400 (5763-XZ1).

The maximum number of FSIOP features that may be installed on the AS/400 is four, subject to the maximum number of LANs allowed on the system. The maximum is the aggregate number of all types of LANs. The Two-Port FSIOP is counted as two LANs. Card slots required: Two

(#6616) Integrated PC Server

(For IBM US, No Longer Available as of March 31, 1999)

The Integrated PC Server is the next step in the evolution of the file serving IOP family. It contains a 166MHz Pentium processor, two IOP memory card slots, and two LAN IOA slots.

Each IOP memory slot can contain either a 32MB or a 128MB card, producing a range of IOP memory capacity from 32MB up to 256MB. At least one IOP memory feature card is required. The IOP memory feature cards are:

Each LAN IOA slot can contain either a Token-Ring IOA or an Ethernet IOA. At least one LAN IOA feature is required. The Integrated PC Server is capable of supporting two IOAs in any combination. The features for the LAN IOAs are:

Prerequisites: At least one memory feature (either #2861 or #2862) and at least one LAN feature (either #6149 Token-Ring, #6181 Ethernet). Requires OS/400 V3R2 with OS/400 no-charge feature #1978, V3R2 Integrated PC Server Support for AS/400.

Novell NetWare V4.1, Lotus Notes 4.1, and FlowMark V2.3 are supported on the new Integrated PC Servers (features #2850 and #6616).

Lotus Domino (Notes Server) 4.5 will be supported on the Integrated PC Servers beginning May 2, 1997. AS/400 support for Domino will include a simplified installation procedure in addition to the new function that Domino provides.

LAN Server for AS/400 is currently not supported on the new Integrated PC Servers (Features #2850 and #6616).

Maximums: Refer to 9404 LAN Feature Summary table.

9404 LAN Feature Summary

 

         ----------------------------------------------------------

        |            9404 System LAN Feature Summary               |

        |----------------------------------------------------------|

        |                  LAN Feature Number                      |

 -------|----------------------------------------------------------|

|System |    |    |     |2663|    |    |    |    |    |    |Maximum|

| Model |2618|2665|FSIOP|2668|2619|2626|2636|6160|2625|2617| LANs  |

|-------|----|----|-----|----|----|----|----|----|----|----|-------|

|  C10  |    |    |     |    |    |    | F  | F  | F  |    |   1   |

|-------|    |    |     |    |    |    |    |    |    |    |       |

|  C20  |    |    |     |    |    |    | F  | F  | F  |    |   2   |

|-------|    |    |     |    |    |    |    |    |    |    |       |

|  C25  |    |    |     |    |    |    | F  | F  | F  |    |   2   |

 ------------------------------------------------------------------

 

Notes:

Communication Guidelines

The 9404 D, E and F model communications controllers and line adapters support a variety of protocols and line types:

·         Switched and nonswitched point-to-point and multipoint lines are supported. X.25 lines are full duplex. ASYNC lines can be full or half duplex.

o        X.21 SHM/MPS concurrent operation is supported for any combination of up to six lines per port group and up to six port groups with BSC, ASYNC, SDLC, and X.25 lines by the Six-line Communications Controller.

Attachment to an X.25 network via an X.25 auto-dial switched line is also supported.

See 2700 Charts P and Q in Sales Manual pages for a list of supported networks. X.25 guidelines are:

o        X.25 circuits can be permanent or switched virtual circuits.

The ISDN Basic Rate Interface Adapter (#2605) will provide the capability to attach to voice/data transmission services having interfaces complying with the IBM ISDN architecture which interprets Recommendation ISDN (1988) of the International Telegraph and Telephone Consultative Committee (CCITT). This interface support will be in conformance with the functional description contained in "Integrated Services Digital Networks Data Link Control - Architecture Reference" (SC31-6826), and Integrated Services Digital "Networks Circuit-Switching Signalling Control - Architecture Reference", (SC31-6827). This ISDN feature supports attachment to the following switches:

Version 2 Release 3 of OS/400 adds support for what is commonly called National ISDN. The Basic Rate Interface Adapter (#2605) now also provides the capability to attach to voice/data transmission services which comply with the guidelines specified in the following Bellcore documents:

4.       Generic Guidelines for ISDN Terminal Equipment on Basic Access Interfaces; Special Report SR-NWT-001953

5.       Generic Guidelines for ISDN Terminal Equipment on National ISDN-2 Basic Rate Interfaces; Special Report SR-NWT-002361

OS/400 configuration parameters are used to select the Basic Rate Interface Adapter operation which is compatible with the ISDN transmission services being used.

Announcement of attachment capability for other ISDN switches, or given release levels of these switches, will depend on network availability and IBM's characterization of the network interface. Selection of additional ISDN networks for attachment will be based upon IBM's technical and business judgement in addressing the requirements of its customers. If network suppliers require certification of this feature, it is the responsibility of the customer or the network supplier to obtain this certification.

This adapter allows communications via ISDN/IDLC with the following:

o        Other similarly equipped AS/400 systems

Attachment of X.25 Packet Switched Networks is also supported using an ISDN B channel as the access facility. The AS/400 will support two X.25 network access types:

Note: When using the ISDN Basic Rate Interface Adapter (#2605), communications with other systems equipped with the IBM ISDN 7820 is not supported if these systems do not support IDLC or X.25 protocols (either natively or through a protocol converter box).

Using appropriate T1/E1/J1 DCE (multiplexor or DSU/CSU), the 9404 Six-line communications controller (#2623) with attached V.35 one-line adapters (#6153-6173) supports SDLC data lines at speeds up to:

Two Six-line Communications Controllers configured for T1/E1/J1 DCE attachment are supported for 9404 D, E, and F models.

·          

·             Protocol   232/V.24   V.35   X.21   I.430    449/V.36

·              ASYNC         19.2     *      *      *        *

·              BSC           19.2    64.0    *      *        *

·              SDLC          19.2   2048    2048    *       2048

·              X.25          19.2   640.0   640.0   *       640.0

·              IDLC           *       *      *     64.0      NA

·              Frame Relay    *      2048   2048    *       2048

·            * Not applicable

·          

Note: Not all maximum speeds are supported on all features. Refer to specific feature descriptions for any limitations.

The following guidelines apply to the communication features on IBM 9404 B and C model systems:

o        All Models can support one Multiple Function IOP, one LAN adapter, and one or two Three-Line Communications Controllers, concurrently. A Model B20/C20/C25 with the expansion unit can support one Multiple Function IOP, one or two LAN Adapters, and one to four Three-Line Communications Controllers, concurrently.

Some X.21 SHM/MPS guidelines are:

§         A maximum of one port per port group is supported per Multi-Function I/O processor.

§         One X.25 line supporting up to sixteen X.25 virtual circuits may operate concurrently with a one-line or a two-line X.21 SHM/MPS port group on the 9404 three-line communications adapter.

Some X.25 guidelines are:

§         A maximum of six X.25 lines are supported on the 9404

Feature Codes Supported By Model

9404 Priced Feature Codes Supported by Model

                                   | BXX |   CXX  |   DXX  |Required
Feat                               | PXX |   TXX  |        | OS/400
Code  Price File Name              |10 20|10 20 25|10 20 25|Release
----  ---------------------------- |-- --|-- -- --|-- -- --|--------
1101  Battery Power Unit           |MR MR|MR MR MR|MR MR MR|V1R1
2600  Magnetic Storage Controller  |MR MR|MR MR MR|SR SR SR|V1R3
2605  ISDN Basic Rate Adapter      |     |        |MR MR MR|V2R1
2617  Ethernet/IEEE 802.3 CSMA/CD  |     |        |MR MR MR|V2R2
2618  Fiber Distributed Data Adpt  |     |        |MR MR MR|V2R3
2619  16/4 Mbps Token-Ring Adapter |     |        |MR MR MR|V2R2
2620  Cryptographic Processor(Full)|     |        |MR MR MR|V2R3
2628  Cryptographic PROC(Limited)  |     |        |MR MR MR|V2R3
2621  Removable Media Device Attch |MR MR|MR MR MR|MR MR MR|V2R1
2622  3490 Magnetic Tape Attach    |SR SR|SR SR SR|SR SR SR|V2R1
2623  Six Line Comm Controller     |     |        |MR MR MR|V2R1
2624  Storage Device Controller    |     |        |MR MR MR|V2R1
2625  Ethernet/IEEE 802.3 CSMA/CD  |MR MR|MR MR MR|MR MR MR|V1R3
2626  16/4 Mbps Token-Ring Adapt/A |     |        |MR MR MR|V2R1
2636  16/4 Mbps Token-Ring Adapter |MR MR|MR MR MR|MR MR MR|V1R3
2644  3490 Magnetic Tape Attach    |MR MR|MR MR MR|MR MR MR|V2R3
2647  9348 Model 2 Tape Attachment |MR MR|MR MR MR|SR SR SR|V1R3
2654  EIA 232/V.24 Two-Line 20E    |     |        |MR MR MR|V2R1
2655  EIA 232/V.24 Two-Line 20     |     |        |MR MR MR|V2R1
2656  X.21 Two-Line 20             |     |        |MR MR MR|V2R1
2657  EIA 232/V.24 Two-Line 50E    |     |        |MR MR MR|V2R1
2658  EIA 232/V.24 Two-Line 50     |     |        |MR MR MR|V2R1
2659  X.21 Two-line 50             |     |        |MR MR MR|V2R1
2663  I/O Attachment Processor     |     |        |MR MR MR|V3R1
2664  Integrated Facsimile Attach  |     |        |MR MR MR|V2R3
2665  Copper Dist Data Interface   |     |        |MR MR MR|V2R3
2666  Frame Relay Adapter          |     |        |MR MR MR|V2R3
2668  AS/400 Wireless LAN Adapter  |     |        |MR MR MR|V3R1
2861  32MB IOP Memory              |     |        |MR MR MR|V3R2
2862  128MB IOP Memory             |     |        |MR MR MR|V3R2
3108  8MB Main Storage             |     |      MR|   MR   |V1R2
3120  8MB Main Storage             |     |        |      MR|V2R1
3121  8MB Main Storage Expansion   |     |        |      MR|V2R1
3122  32MB Main Storage            |     |        |      MR|V2R1
4104  4MB Main Storage             |MR MR|MR MR MR|MR MR   |V1R1
4114  4MB Main Storage Expansion   |MR MR|MR MR MR|MR MR   |V1R1
5003  DLSO Pre-Load                |     |        |        |
5006  Backup Tape-Preload SW       |     |        |        |
5133  Feature Power Supply         |MR MR|MR MR MR|MR MR MR|V1R1
6050  Twinaxial Workstn Controller |MR MR|MR MR MR|MR MR MR|V2R2
6054  LocalTalk Workstn Controller |     |        |MR MR MR|V2R3
6100  Disk Unit (315MB)            |SR SR|SR SR SR|SR SR SR|V1R1
6105  Single Disk Unit (320 MB)    |MR MR|MR MR MR|MR MR MR|V1R2.1
6106  Dual Disk Unit (640MB)       |MR MR|MR MR MR|MR MR MR|V1R2.1
6107  Single Disk Unit (400 MB)    |MR MR|MR MR MR|MR MR MR|V2R1
6108  Addition Dual Disk (640MB)   |MR MR|MR MR MR|MR MR MR|V1R3
6109  Single Disk Unit (988MB)     |     |        |MR MR MR|V2R1.1
6120  Dual Disk Unit (800 MB)      |MR MR|MR MR MR|MR MR MR|V2R1
6121  Addition Dual Disk (800MB)   |MR MR|MR MR MR|MR MR MR|V2R1
6123  Addition Dual Dsk (1976MB)   |     |        |MR MR MR|V2R1.1

 

9404 Priced Feature Codes supported by model

                                   | BXX |   CXX  |   DXX  |Required
Feat                               | PXX |   TXX  |        | OS/400
Code  Price File Name              |10 20|10 20 25|10 20 25|Release
----  ---------------------------- |-- --|-- -- --|-- -- --|--------
6124  Base DASD Upgrade (1976MB)   |     |        |      M |V2R1.1
6125  Base DASD Replace (988MB)    |     |        |      M |V2R1.1
6127  Base DASD Replace (1976MB)   |     |        |      M |V2R1.1
6131  Diskette Unit (5 1/4-inch)   |MR MR|MR MR MR|MR MR MR|V1R1
6132  Diskette Unit (8-inch)       |MR MR|MR MR MR|MR MR MR|V1R1
6137  Diskette Unit (5 1/4-inch)   |     |        |MR MR MR|V2R1
6138  Diskette Unit (8-inch)       |     |        |MR MR MR|V2R1
6140  Twinaxial Workstn Controller |MR MR|MR MR MR|MR MR MR|V1R1
6141  ASCII Workstation Controller |MR MR|MR MR MR|MR MR MR|V1R1
6142  ASCII 12 Port Workstn Attach |MR MR|MR MR MR|MR MR MR|V1R1
6149  16/4Mbps Token-Ring IOA      |     |        |MR MR MR|V3R2
6150  Three-Line Comm Controller   |MR MR|MR MR MR|SR SR SR|V1R1
6151  X.21 One-Line 20             |MR MR|MR MR MR|MR MR MR|V1R1
6152  EIA 232/V.24 Adapter         |MR MR|MR MR MR|SR SR SR|V1R1
6153  V.35 One-Line 20             |MR MR|MR MR MR|MR MR MR|V1R1
6154  EIA 232/V.24 One-Line 20E    |     |        |MR MR MR|V2R1
6155  EIA 232/V.24 One-Line 20     |     |        |MR MR MR|V2R1
6160  Token-Ring Network Adapter   |SR SR|SR SR SR|SR SR SR|V1R1
6171  X.21 One-line 50             |     |        |MR MR MR|V2R1
6173  V.35 One-Line 50             |     |        |MR MR MR|V2R1
6174  EIA 232/V.24 One-Line 50E    |     |        |MR MR MR|V2R1
6175  EIA 232/V.24 One-Line 50     |     |        |MR MR MR|V2R1
6181  Ethernet/IEEE 802.3 IOA      |     |        |MR MR MR|V3R2
6346  120MB 1/4-in Cartridge Tape  |   MR|   MR MR|SR SR SR|V1R1
6347  525MB 1/4-in Cartridge Tape  |   MR|   MR MR|MR MR MR|V2R1
6348  1.2GB 1/4-in Cart Tape       |     |        |      MR|V2R2
6349  2.5GB 1/4-in Cart Tape       |     |        |      MR|V3R0.5
6501  3490 Magnetic tape Attach    |     |        |MR MR MR|V2R3
6509  Addl 16MB SIMMS for FSIOP    |     |        |MR MR MR|V3R1
6516  File Server, 16MB 1 Port LAN |     |        |MR MR MR|V3R1
6517  File Server, 32MB 1 Port LAN |     |        |MR MR MR|V3R1
6518  File Server, 48MB 1 Port LAN |     |        |MR MR MR|V3R1
6519  File Server, 64MB 1 Port LAN |     |        |MR MR MR|V3R1
6520  Upgr 1 Port FSIOP to 2 Port  |     |        |        |V3R1
6526  File Server, 16MB 2 Port LAN |     |        |        |V3R1
6527  File Server, 32MB 2 Port LAN |     |        |        |V3R1
6528  File Server, 48MB 2 Port LAN |     |        |        |V3R1
6529  File Server, 64MB 2 Port LAN |     |        |        |V3R1
6602  Single DASD Unit (1.031GB)   |     |        |        |V2R3
6603  Single DASD Unit (1967MB)    |     |        |        |V2R3
6612  Dual DASD Unit (2.062GB)     |     |        |        |V2R3
6613  Dual DASD Unit (3934MB)      |     |        |        |V2R3
6616  Integrated PC Server         |     |        |MR MR MR|V3R2
6802  Single DASD Unit (1.031GB)   |     |        |        |V2R3
6812  Dual DASD Unit (2.062GB)     |     |        |        |V2R3
7100  Expansion Unit               |   MR|   MR MR|SR SR SR|V1R1
7110  Expansion Unit - D Models    |     |        |MR MR MR|V2R1
7120  Expansion Unit - E Models    |     |        |        |V2R1.1
7201  Dual Disk Install-Sys Unit   |M  M |M  M  M |M  M    |V1R3
7202  Dual Disk Install-Exp Unit   |   MR|   MR MR|MR MR MR|V1R3
7203  Storage Expansion Unit       |     |        |      MR|V2R1
7348  1.2GB 1/4-in Cart Tape       |     |        |      M |V2R1.1
7349  2.5GB 1/4-in Cart Tape       |     |        |      MR|V3R0.5
7613  Base DASD Replace  (3934MB)  |     |        |        |V2R3
8054  LocalTalk Workstation CONTR  |     |        |      MR|V2R3
8123  Dual DASD Unit (1976MB)      |     |        |        |V2R1.1
8347  525MB 1/4-in Cartridge Tape  |M  M |M  M  M |M  M  MR|V2R1
8348  1.2GB 1/4-in Cart Tape       |     |        |        |V2R1.1
8349  2.5GB 1/4-in Cart Tape       |     |        |        |V3R0.5
8612  Opt Base Disk Unit (2.062GB) |     |        |        |V2R3
8613  Opt Base Disk Unit (3934MB)  |     |        |        |V2R3

 

Order Support Codes
-------------------
S - Supported (Load in price file and withdraw on same day)
P - Plant install only
M - MES install only
B - Both Plant and MES install
* - Cable
R - Removal Price released

 

Feature Exchanges

The following feature exchanges are available for the 9404. In the U.S., one-for-one feature exchanges are generally ordered as MES Feature Conversions. Many-for-one (i.e., two-for-one, three-for-one) feature exchanges are ordered as MES Feature Group Exchanges. In countries other than the U.S., feature exchanges are ordered by feature codes.

                                                     (Non-U.S.)
                                                      Feature
 Description                                           Codes
 ---------------------------------------------------   ----
 Exchange one #4104 for one #3108                      3070
(For IBM US, No Longer Available as of July 31, 1996)
 Exchange two #4104 for one #3120                      3800
 Exchange one #4104 for one #3120                      3801
 Exchange one #4104 for one #3121                      3802
 Exchange one #4104 for one #3122                      3803
 Exchange one #3108 for one #3120                      3804
 Exchange one #3108 for one #3121                      3805
 Exchange one #3108 for one #3122                      3806
 Exchange one #4114 for one #3120                      3807
 Exchange one #4114 for one #3121                      3808
 Exchange one #4114 for one #3122                      3809
 Exchange one #4104 and one #4114 for one #3120        3810
 Exchange one #4104 and one #4114 for one #3121        3811
 Exchange one #4104 and one #4114 for one #3122        3812
 Exchange two #4114 for one #3120                      3813
 Exchange two #4114 for one #3121                      3814
 Exchange two #4114 for one #3122                      3815
 Exchange one #4104 and two #4114 for one #3122        3816
 Exchange two #4104 and two #4114 for one #3122        3817
 Exchange two #4104 and three #4114 for one #3122      3818
 Exchange two #4104 and four #4114 for one #3122       3819
 Exchange one #3108 and one #4114 for one #3122        3820
 Exchange one #3108 and two #4114 for one #3122        3821
 Exchange two #3108 and two #4114 for one #3122        3822
 Exchange two #3108 and three #4114 for one #3122      3823
 Exchange two #3108 and four #4114 for one #3122       3824
 Exchange one #3120 for one #3122                      3825
 Exchange one #3121 for one #3122                      3826
 Exchange one #3120 and one #3121 for one #3122        3827
 Upgrade #6105 (320MB) to #6108 (640MB)                6070
(For IBM US, No Longer Available as of July 31, 1996)
 Upgrade #6107 (400MB) to #6121 (800MB)                6072
(For IBM US, No Longer Available as of July 31, 1996)
 Upgrade #6109 (988MB) to #6123 (1976MB)               6078
(For IBM US, No Longer Available as of July 31, 1996)
 Upgrade #9109 (988MB) to #6124 (1976MB)               6079
(For IBM US, No Longer Available as of July 31, 1996)
 Upgrade #6125 (988MB) to #6124 (1976MB)               6080
(For IBM US, No Longer Available as of July 31, 1996)
 Upgrade #6603 (1967MB) to #6613 (3934MB)              6082
(For IBM US, No Longer Available as of July 31, 1996)
 Convert #6131 (5 1/4-inch Diskette) to #6137          8512
(For IBM US, No Longer Available as of July 31, 1996)
 Convert #6132 (8-inch Diskette) to #6138              8513
(For IBM US, No Longer Available as of July 31, 1996)
 Convert #7100 (Expansion Unit) to #7110               8514
(For IBM US, No Longer Available as of July 31, 1996)
 Convert #7100 (Expansion Unit) to #7120               8518
(For IBM US, No Longer Available as of July 31, 1996)
 Convert #7110 (Expansion Unit) to #7120               8519
(For IBM US, No Longer Available as of July 31, 1996)
 Convert #6346 (1/4-Inch Tape) to #6347                8520
(For IBM US, No Longer Available as of July 31, 1996)
 Convert #2600 to #2624                                8521
(For IBM US, No Longer Available as of July 31, 1996)
 Convert #6346 (1/4-Inch Tape) to #6348                8523
(For IBM US, No Longer Available as of July 31, 1996)

 


Accessories

 

                  P/N         Description

                  ---         -----------

                2438441  Twinax Port Tester English

                2438442  Twinax Port Tester Italian

                2438443  Twinax Port Tester Japanese

                69X7016  Async Modem Cable

                21F2674  Async Modem Cable Japan

                21F2671  Async Modem Cable Germany

                21F4505  20ft EIA 232 Terminal/Prt

                21F4342  40ft EIA 232 Terminal/Prt

                21F4346  100ft EIA 232 Terminal/Prt

                21F9965  20ft EIA 232 IWS

                21F4403  EIA 422 Surge Suppressor

                74F0360  Antenna Cable - 20 ft

                74F0361  Antenna Cable - 50 ft

                74F0362  Omni-Directional Antenna

                74F0363  Hemispherical Directional

                         Antenna

                74F0364  Directional Antenna

                74F0365  7208 4M Attachment Cable

                74F0366  3M (9.8 ft) AUI Ethernet

                         Cable

                74F0367  2.44M (8 ft) 802.5 Token-

                         Ring Cable

                74F0369  6.1M (20ft) CCITT X.21

                74F0370  6.1M (20ft) CCITT V.35 cable

                74F0371  24.2M (80ft) CCITT V.35 cable

                74F0372  6.1M (20ft) CCITT V.36/EIA RS449 cable

                74F0373  24.2M (80ft) CCITT V.36/EIA RS449 cable

                74F0374  45.7M (150ft) CCITT V.36/EIA RS449 cable

                74F0381  20m (65.6 ft) Optical Cable

                74F0382  EIA 232/V.24 E 20ft

                74F0383  EIA 232/V.24 E 20ft Japan

                74F0384  EIA 232/V.24 E 20ft Germany

                74F0385  EIA 232/V.24 20ft

                74F0386  EIA 232/V.24 20ft Japan

                74F0387  EIA 232/V.24 20ft Germany

                74F0388  X.21 20ft

                74F0389  V.35 20ft

                74F0390  RS 366 Autocall 20ft

                74F0391  RS 366 Autocall 20ft Japan

                74F0392  EIA 232/V.24 E 50ft

                74F0393  EIA 232/V.24 E 50ft Japan

                74F0394  EIA 232/V.24 E 50ft Germany

                74F0395  EIA 232/V.24 50ft

                74F0396  EIA 232/V.24 50ft Japan

                74F0397  EIA 232/V.24 50ft Germany

                74F0398  X.21 50ft

                74F0399  V.35 50ft

                74F1825  EIA 232/V.24 E 80ft

                17G2577  EIA 232/V.24 E 80ft Japan

                17G2578  EIA 232/V.24 E 80ft Germany

                74F1827  V.35 80ft

 

Note:  Order accessories via MSORDER (Category = Accessories/Supplies,

Machine Type = 9404 and by the part number.)

 

Customer Replacement Parts

Not available.


Machine Elements

Not available.


Supplies

Tape Cartridges:

·         The 120MB 1/4-Inch Cartridge Tape Unit uses the IBM 6150 Data Cartridge (120MB), part number 21F8588 or equivalent.

Note: 8mm data cartridge media must meet the proposed American National Standards Institute (ANSI) standard X3B5/89-136, Unrecorded Magnetic Tape Cartridge for Information Exchange.

Cleaning Cartridges and Kits:

·         The 120MB and 525MB 1/4-Inch Cartridge Tape Units use the IBM .25-Inch Cleaning Cartridge Kit, part number 16G8572 or equivalent.

o        Note: This Cleaning Cartridge will NOT work in the 120MB or 525MB Tape Units.

Diskettes

The diskette units utilize the following IBM or equivalent diskette media:

8-inch diskettes:

·         IBM Diskette 1

o        P/N 2305830 128 Bytes/Sector

5 1/4-inch diskettes:

·         IBM Diskette 2HC

o        P/N 6109660 80 Track/Double Sided

·         8mm Data Cartridge media, 8mm Cleaning Cartridges and Diskette media supplies can be purchased from IBM Authorized Supplies Dealers, IBM Authorized Distributors or from IBM Direct through the following phone number:

o        888-426-6334.

Trademarks

(R), (TM), * Trademark or registered trademark of International Business Machines Corporation.

** Company, product, or service name may be a trademark or service mark of others.

Windows is a trademark of Microsoft Corporation.

UNIX is a registered trademark in the United States and other countries licensed exclusively through X/Open Company Limited.