Family
9406+01 IBM AS/400e servers
IBM EMEA Sales Manual
Revised: July 29, 2003.
|
Table
of contents |
|
Document
options |
|
|||||||||||||
|
|
|
|
Abstract
|
|
|
|
The IBM 9406 AS/400e SXX servers with the dynamic
64-bit PowerPC AS microprocessor, coupled with a generous amount of main
storage, disk capacity, client support, feature card slots, and communications
lines, you have what you need to help you maximize your gains from
client/server computing.
Models S20, S30, and S40 custom mixed-mode
e-servers can deliver increased interactive processing at a competitive
price for mixed-workload environments. These specially balanced processors can
be ordered only as components of an overall packaged solution. Vendor software
purchased from ISV channels is preloaded (partial or total) or validated as
part of the preparation before shipment. ISV software can also be preloaded on
other e-servers.
Beginning with Version 4 Release 1, OS/400 is
included in the price of AS/400e servers. A software order is required to
record the OS/400 license included with these systems.
With all this advanced technology, AS/400
builds on a simple concept -- faster deployment of your applications at lower
cost to implement and manage. AS/400 Advanced Application Architecture --
designed to incorporate network-enabled technology in a non-disruptive manner
-- helps protect your investment and deliver secure, reliable network
computing.
Model Abstract 9406-S10
(For IBM US, No Longer Available as of May 31,
1999)
The IBM 9406 Model S10 has, depending upon the
processor feature selected, 64MB minimum and 512MB maximum Main Storage, in
addition to DASD Capacity of 4.19GB minimum and 175.4GB maximum.
Model Abstract 9406-S20
(For IBM US, No Longer Available as of May 31,
1999)
The IBM 9406 Model S20 has, depending upon the
processor feature selected, 256MB minimum and 4096MB maximum Main Storage, in
addition to DASD Capacity of 4.19GB minimum and 944.8GB maximum.
Model Abstract 9406-S30
(For IBM US, No Longer Available as of May 31,
1999)
The IBM 9406 Model S30 has, depending upon the
processor feature selected, 512MB minimum and 24576MB maximum Main Storage, in
addition to DASD Capacity of 4.19GB minimum and 1340.0GB maximum.
Model Abstract 9406-S40
(For IBM US, No Longer Available as of May 31,
1999)
The IBM 9406 Model S40 has, depending upon the
processor feature selected, 1024MB minimum and 40960MB maximum Main Storage, in
addition to DASD Capacity of 4.19GB minimum and 2095.9GB maximum.
Back to top
|
|
|
|
Stronger, faster...keeping pace with your
changing business
- Models with PowerPC processors, including 8-way and 12-way
processors
- Custom mixed-mode e-servers deliver compute-intensive processing power for multitier ISV
solutions
- AS/400 adapters based on industry-standard PCI technology
- Customer-installable features for the Model S10
- Packaging architecture for growth and robustness
- Tougher e-commerce posture
- Stronger competitive influence
|
|
|
|
· 64-bit RISC technology
Featuring IBM PowerPC AS microprocessors, AS/400e servers offer exceptional processor performance, main storage and DASD capacity -- all at a lower cost of computing.
- Exceptional client/server performance
E-servers deliver dramatic performance gains and supports a variety of client applications and industry-leading client operating systems
- Flexibility for today and tomorrow
AS/400e servers are available in four models -- spanning 22 different processors. This assures you of considerable flexibility when matching system performance with your business needs as well as clearing a cost-efficient growth path for the future.
- Simplified, network-centric computing
A wealth of mission-critical features are built in, making your e-server easier to manage and allowing it to work in multivendor environments.
- Built-in relational database
The powerful DB2 for OS/400 is the most popular multi-user relational database management system (RDBMS) in the world. DB2 for OS/400 is ANSI 92 standards-compliant, guarantees conformance with IBM DATABASE 2 (DB2) family and SQL, and provides open environment functions that can interoperate with other industry-standard RDBMS.
- Exceptional performance and expandability
Based on the PowerPC AS microprocessor, AS/400e servers deliver leadership performance and provide outstanding storage capability, with optional features available to grow the server with your business needs. OS/400 Version 4 contains server model enhancements which improve performance and simplify management in mixed environments.
Prior to Version 4, loading additional interactive work on a system resulted in a general system slowdown for both interactive and non-interactive work. With Version 4, the system automatically manages job priorities to ensure that non-interactive work is not impacted by interactive work. In environments where there is not significant interactive work, behavior is the same as it was prior to Version 4.
Operations Console
The AS/400 supports a new directly-attached,
full-function 5250 PC console that includes a graphical control panel
application. The user interface of the control panel application resembles its
hardware counterpart. The console and control panel applications can be used
together or separately, but each requires its own direct cable attachment to an
AS/400 system. Each cable must be purchased separately from IBM for the AS/400
model being used. Both cables are only available in a single length of six
meters.
The direct-attach console can also serve as a
gateway for a dial-in remote console. The remote console can also be configured
to run the 5250 emulator application and/or the graphical control panel
application. Both applications enable you to perform the majority of system
operations tasks, for example back-up and recovery, with the AS/400 systems and
the operations staff in physically separate locations. The connection between
the remote and direct-attach console uses Windows dial-up networking
point-to-point protocol (PPP) with the direct-attach console employing Windows
NT Remote Access Service (RAS) for access.
The applications are included on the Operations
Navigator CD-ROM shipped with OS/400 V4R3. They are installed and used from PCs
with Windows NT Workstation 4.0 (required for the direct-attach console when it
serves as a remote console gateway) when remote PC access is desired or Windows
9X operating systems. The operations console application requires the
appropriate operations console cable, based on the AS/400 model on which it
will be used. The remote control panel application requires a remote control
panel cable, also based on the AS/400 model. OS/400 V4R3 is always required for
direct/remote 5250 console attachment, however the control panel application
will function as a stand-alone application with any AS/400 Advanced Series or
e-Series system.
EZ-Setup
EZ-Setup simplifies iSeries setup with a GUI
and an easy-to-follow interface on your PC attached to an AS/400 via Op
Console, or a LAN connection. EZ-Setup steps you through the setup process and
minimize decisions where possible. EZ-Setup is delivered on the Setup and
Operations CD shipped with the iSeries system hardware. The code runs on a PC
under Windows 95/98/NT 4.0/2000.
EZ-Setup leads you through these tasks
· Installs Client Access Express and the components of Operations Navigator needed by EZ-Setup
- Set the system name, date, time, and security values
- Creates security officer and system operator profiles
- Defines LAN connection for Token-Ring or Ethernet adapter
- Starts TCP/IP and selected servers
- Configures the Operations Console so that it is ready to use when
EZ-Setup finishes
- Performs initial NetServer configuration for Client Access by
setting the System and Domain names for NetServer
- Provides an option to start Client Access Express install from
initial screen
- Installs Domino software and configures Domino partitions
- Integrates links to the Information Center for information that is
relevant for setup, including
LPAR
Software
Install
Security
BRMS
Base System Description
The base configurations of these AS/400e
servers offer performance and capabilities suited for many growing businesses.
Among the components in the base system are:
· System processor available in several options for most models with different levels of performance and corresponding capacities of main storage
- 4.19GB 3 1/2-inch disk unit or optional 8.58GB or 17.54GB disk units
- Multi-Function I/O Processor provides support for disk storage, internal
tape, CD-ROM, a system display console, and communication lines
- One workstation adapter
- Communications adapter for Electronic Customer Support (ECS) (attachment
cable must be ordered.)
- Ethernet or Token-Ring LAN adapter may be included in the base system at no
additional charge
- CD-ROM drive is included in AS/400 systems using PowerPC technology
- Concurrent repair capability makes it possible to repair or replace disk
units while the system is fully operational
- Continuously powered main storage and battery
backup for greater system
availability (not on Model S10)
Feature Availability Matrix
To ensure that you continually get full value
and productivity from your system and to address your changing business needs,
AS/400e servers offer a comprehensive selection of optional features -- some
new, others previously available on earlier models. The following tables show
feature availability by model.
Features Orderable for Models S10, S20,
S30, and S40
Key
---
P - Plant install only: Available on new system orders only.M - MES install only: Available for field installation only.B - Plant or MES install
S - Supported: Supported on these systems but cannot be ordered.FEATURE REMOVALS: Feature removals not associated with MESupgrades are available for a charge.
Feature | Model | Model | Model | Model |Number Description | S10 | S20 | S30 | S40 |
---- --------------------------------|-------|-------|-------|-------|0032 High-Speed Modem | B | B | B | B |
0033 IGN/400 | B | B | B | B |
0059 Transition Data Link | S | S | S | S |
0202 Staged Upgrade Offering | S | S | S | S |
0325 IPCS Extension Cable for NT | B | B | B | B |
0328 Operations Console Cable | | B | B | B |
0330 V.24/EIA232 20-Ft Cable | | B | B | B |
0331 V.24/EIA232 50-Ft Cable | | B | B | B |
0335 V.36/EIA449 20-Ft Cable | | B | B | B |
0336 V.36/EIA449 50-Ft Cable | | B | B | B |
0337 V.36/EIA449 150-Ft Cable | | B | B | B |
0338 V.35 20-Ft Cable | | B | B | B |
0339 V.35 50-Ft Cable | | B | B | B |
0340 V.35 80-Ft Cable | | B | B | B |
0341 X.21 20-Ft Cable | | B | B | B |
0342 X.21 50-Ft Cable | | B | B | B |
0344 20-Ft Comm Console Cable | | | B | B |
0348 V.24/EIA232 20-Ft PCI Cable | B | B | B | B |
0349 V.24/EIA232 50-Ft PCI Cable | B | B | B | B |
0353 V.35 20-Ft PCI Cable | B | B | B | B |
0354 V.35 50-Ft PCI Cable | B | B | B | B |
0355 V.35 80-Ft PCI Cable | B | B | B | B |
0356 V.36 20-Ft PCI Cable | B | B | B | B |
0358 V.36 150-Ft PCI Cable | B | B | B | B |
0359 X.21 20-Ft PCI Cable | B | B | B | B |
0360 X.21 50-Ft PCI Cable | B | B | B | B |
0362 20-Ft Comm Console PCI Cable | B | B | | |
0365 V.24/EIA232 80-Ft PCI Cable | B | B | B | B |
0366 Optical Bus Cable (20M) | | B | B | B |
0367 Operations Console PCI Cable | B | B | B | B |
0380 Remote Control Panel Cable | | | B | B |
0381 Remote Control Panel Cable | B | B | | |
0400 Preload SAP R/3 | P | P | P | P |
0421 Validate JDE | | P | P | P |
0425 High Availability | | P | P | P |
0430 Preload SSA | P | P | P | P |
0431 Validate SSA | | P | P | P |
0432 SSA Pkg 1 Ready-To-Go-M/M | P | P | P | P |
0433 SSA Pkg 2 Ready-To-Go-C/S | P | P | P | P |
0435 Preload Infinium | P | P | P | P |
0436 Validate Infinium | | P | P | P |
0440 Preload JBA | P | P | P | P |
0441 Validate JBA | | P | P | P |
0445 Preload Acacia | P | P | P | P |
0451 RRR Preload(SAP Test Server) | | P | | |
0452 RRR Preload(SAP Prod Server) | | P | P | P |
0460 Preload Intentia | P | P | P | P |
0461 Validate Intentia | | P | P | P |
0470 Preload IBS | P | P | P | P |
0471 Validate IBS | | P | P | P |
0480 Preload MAPICS | P | P | P | P |
0481 Validate MAPICS | | P | P | P |
0490 Preload Baan | P | P | P | P |
0491 Validate Baan | | P | P | P |
1312 1-Byte 1.03GB Disk Unit Kit | S | S | | |
1313 1-Byte 1.96GB Disk Unit Kit | S | S | | |
1322 2-Byte 1.03GB Disk Unit Kit | S | S | | |
1323 2-Byte 1.96GB Disk Unit Kit | S | S | | |
1325 2-Byte 1.03GB Disk Unit Kit | S | S | | |
1326 2-Byte 1.96GB Disk Unit Kit | S | S | | |
1327 2-Byte 4.19GB Disk Unit Kit | S | S | | |
1333 2-Byte 8.58GB Disk Unit Kit | S | S | | |
1334 17.54GB Disk Unit Kit | S | S | | |
1336 2-Byte 1.96GB Disk Unit Kit | S | S | | |
1337 2-Byte 4.19GB Disk Unit Kit | S | S | | |
1349 1.2GB 1/4-Inch Tape Kit | S | S | | |
1350 2.5GB 1/4-Inch Tape Kit | S | S | | |
1355 13.0GB 1/4-Inch Tape Kit | S | S | | |
1360 7.0GB 8mm Cartridge Tape Kit | S | S | | |
1379 1.2GB 1/4-Inch Tape Kit | | | S | S |
1380 2.5GB 1/4-Inch Tape Kit | | | S | S |
1400 200V 6-Ft Line Cord | | B | B | B |
1401 200V 14-Ft Line Cord | | B | B | B |
1404 200V 6-Ft Locking Line Cord | | B | B | B |
1405 200V 6-Ft Wtrtght Line Cord | | B | B | B |
1406 200V 14-Ft Locking Line Cord | | B | B | B |
1407 200V 14-Ft Wtrtght Line Cord | | B | B | B |
1423 200V 6-Ft Upper Line Cord | | B | B | B |
1428 200V 6-Ft Upper Locking Cord | | B | B | B |
1429 200V 6-Ft Upper Wtrthgt Cord | | B | B | B |
1602 Single Disk Unit Kit (1.03GB) | | | S | S |
1603 Single Disk Unit Kit (1.96GB) | | | M | M |
2118 Model S10 Processor | S | | | |
2119 Model S10 Processor | B | | | |
2161 Model S20 Processor | | B | | |
2163 Model S20 Processor | | B | | |
2165 Model S20 2-Way Processor | | B | | |
2166 Model S20 4-Way Processor | | B | | |
2170 Model S20 2-Way ISV Processor | | S | | |
2177 Model S20 4-Way ISV Processor | | B | | |
2178 Model S20 4-Way ISV Processor | | S | | |
2207 Model S40 8-Way Processor | | | | B |
2208 Model S40 12-Way Processor | | | | B |
2256 Model S40 8-Way Processor | | | | B |
2257 Model S30 Processor | | | B | |
2258 Model S30 2-Way Processor | | | B | |
2259 Model S30 4-Way Processor | | | B | |
2260 Model S30 8-Way Processor | | | B | |
2261 Model S40 12-Way Processor | | | | B |
2320 Model S30 4-Way ISV Processor | | | B | |
2321 Model S30 8-Way ISV Processor | | | B | |
2322 Model S30 8-Way ISV Processor | | | B | |
2340 Model S40 8-Way ISV Processor | | | | B |
2341 Model S40 12-Way ISV Processor | | | | B |
2605 ISDN Basic Rate Adapter | | S | S | S |
2609 EIA 232/V.24 Two-Line Adapter | | S | S | S |
2610 X.21 Two-Line Adapter | | S | S | S |
2612 EIA 232/V.24 One-Line Adapter | | S | S | S |
2613 V.35 One-Line Adapter | | S | S | S |
2614 X.21 One-Line Adapter | | S | S | S |
2621 Removable Media Device Attach | | S | S | S |
2623 Six-Line Comm Controller | | S | S | S |
2624 Storage Device Controller | | S | S | S |
2628 Cryptographic Processor (Comml) | | S | S | S |
2629 LAN/WAN/Workstation IOP | | B | B | B |
2644 34XX Magnetic Tape Attach | | S | S | S |
2664 Integrated FAX Adapter | | S | S | S |
2669 Shared Bus Interface Card | | B | B | B |
2683 266Mbps OptiConnect Recvr | | S | S | S |
2685 1063Mbps OptiConnect Recvr | | S | S | S |
2686 Optical Link Proc (266Mbps) | | S | | |
2688 Optical Link Proc (1063Mbps) | | B | B | B |
2695 Optical Bus Adapter | | | B | B |
2699 Two-Line WAN IOA | | S | S | S |
2718 PCI Magnetic Media Controller | S | S | S | S |
2720 PCI WAN/Twinaxial IOA | S | S | | |
2721 PCI Two-Line WAN IOA | S | S | | |
2722 PCI Twinaxial Workstation IOA | | S | | |
2723 PCI Ethernet IOA | S | S | S | S |
2724 PCI 16/4Mbps Token-Ring IOA | B | B | B | B |
2726 PCI RAID Disk Unit Controller | S | S | | |
2729 PCI Magnetic Media Controller | S | S | S | S |
2730 Programmable Regulator | | | B | |
2740 PCI RAID Disk Unit Controller | S | S | | |
2741 PCI RAID Disk Unit Controller | | S | | |
2745 PCI Two-Line WAN IOA | B | B | B | B |
2746 PCI Twinaxial WS Controller | | B | B | B |
2748 PCI RAID Disk Unit Controller | S | S | S | S |
2750 PCI ISDN BRI U IOA | S | S | S | S |
2751 PCI ISDN BRI S/T IOA | S | S | S | S |
2761 PCI Integrated Analog Modem | S | S | S | S |
2809 PCI LAN/WAN/Workstation IOP | S | S | | |
2810 LAN/WAN IOP | | S | S | S |
2811 PCI 25Mbps UTP ATM | S | S | S | S |
2812 PCI 45Mbps Coax T3/DS3 ATM | S | S | S | S |
2815 PCI 155Mbps UTP OC3 ATM | S | S | S | S |
2816 PCI 155Mbps MMF ATM | S | S | S | S |
2818 PCI 155Mbps SMF OC3 ATM | S | S | S | S |
2819 PCI 34Mbps Coax E3 ATM | B | B | B | B |
2824 PCI LAN/WAN/Workstation IOA | B | B | B | B |
2830 Main Storage Expansion | | B | | |
2838 PCI 100/10 Ethernet IOA | B | B | B | B |
2851 PCI Integrated PC Server | S | S | | |
2854 PCI Integrated PC Server | S | S | | |
2860 16MB IOP Memory | B | B | | |
2861 32MB IOP Memory | B | B | B | B |
2862 128MB IOP Memory | B | B | B | B |
2865 PCI Integrated Netfinity Server | S | S | | |
2867 256MB IOP Memory | B | B | B | B |
3001 32MB Main Storage | | B | | |
3002 128MB Main Storage | | B | | |
3110 64MB Main Storage | B | | | |
3179 256MB Main Storage | | | B | B |
3180 512MB Main Storage | | | B | B |
3182 32MB Main Storage | B | | | |
3189 128MB Main Storage | | | B | B |
3190 256MB Main Storage | | | M | M |
3191 512MB Main Storage | | | M | M |
3192 1024MB Main Storage | | | B | B |
3193 2048MB Main Storage | | | B | B |
4308 4.19GB Disk Unit | | B | B | B |
4314 8.58GB Disk Unit | | S | S | S |
4317 8.58GB 10k rpm Disk Unit | | B | B | B |
4318 17.54GB 10k rpm Disk Unit | | B | B | B |
4324 17.54GB Disk Unit | | S | S | S |
4331 1.6GB Read Cache Device | | S | S | S |
4425 CD-ROM | | B | B | B |
4482 4GB 1/4-Inch Cartridge Tape | | B | B | B |
4483 16GB 1/4-Inch Cartridge Tape | | B | B | B |
4486 25GB 1/4-Inch Cartridge Tape | | B | B | B |
4684 30GB 1/4-Inch Cartridge Tape | | B | B | B |
4800 PCI Cryptographic Coprocessor | S | S | S | S |
4802 PCI Cryptographic Coprocessor | | B | B | B |
5052 Storage Exp Unit (Exp Unit) | | S | S | S |
5055 Storage Expansion Unit | | | S | |
5057 Storage Expansion Unit | | | | B |
5058 Storage Expansion Unit | | S | S | S |
5064 System Unit Expansion | | S | | |
5065 Storage/PCI Expansion Tower | | B | B | B |
5066 1.8m I/O Tower | | B | B | B |
5073 1063Mbps Sys Unit Exp Tower | | S | S | S |
5083 1063Mbps Storage Exp Tower | | S | S | S |
5101 30-Disk Expansion Feature | | B | B | B |
5143 Feature Power Supply (400W) | | S | S | S |
5150 Battery Backup (External) | | | S | S |
5151 Power Supply (650 Watts) | | | S | |
5153 Redundant Power Supplies | | S | | |
6141 ASCII Workstation Controller | | S | S | S |
6142 ASCII 12-Port Attachment | | S | S | |
6149 16/4Mbps Token-Ring IOA | | S | S | S |
6180 Twinaxial Workstation IOA | | S | S | S |
6181 Ethernet/IEEE 802.3 IOA | | S | S | S |
6325 CD-ROM | | B | B | B |
6381 2.5GB 1/4-Inch Cart Tape | | S | S | S |
6382 4GB 1/4-Inch Cartridge Tape | | B | B | B |
6383 16GB 1/4-Inch Cartridge Tape | | B | B | B |
6384 30GB 1/4-Inch Cartridge Tape | | B | B | B |
6385 13GB 1/4-Inch Cartridge Tape | | S | S | S |
6386 25GB 1/4-Inch Cartridge Tape | | B | B | B |
6425 CD-ROM | S | | | |
6480 2.5GB 1/4-Inch Cartridge Tape | S | | | |
6481 2.5GB 1/4-Inch Cartridge Tape | S | S | | |
6482 4GB 1/4-Inch Cartridge Tape | B | B | | |
6483 16GB 1/4-Inch Cartridge Tape | B | B | | |
6484 30GB 1/4-Inch Cartridge Tape | | M | | |
6485 13GB 1/4-Inch Cartridge Tape | S | S | | |
6486 25GB 1/4-Inch Cartridge Tape | B | B | | |
6501 Tape/Disk Device Controller | | S | S | S |
6513 Internal Tape Device Controller | | S | S | S |
6532 RAID Disk Unit Controller | | S | S | S |
6533 RAID Disk Unit Controller | | S | S | S |
6534 Magnetic Media Controller | | S | S | S |
6616 Integrated PC Server | | S | S | S |
6617 Integrated PC Server | | S | S | S |
6618 Integrated PC Server | | S | S | S |
6713 8.58GB Disk Unit | | B | B | M |
6714 17.54GB Disk Unit | | S | S | S |
6717 8.58GB 10k rpm Disk Unit | | B | B | M |
6718 17.54GB 10k rpm Disk Unit | | B | B | M |
6807 4.19GB Disk Unit | S | S | | |
6813 8.58GB Disk Unit | S | S | | |
6817 8.58GB 10k rpm Disk Unit | B | B | | |
6818 17.54GB 10k rpm Disk Unit | B | B | | |
6824 17.54GB Disk Unit | S | S | | |
6831 1.6GB Read Cache Device | S | S | | |
6907 4.19GB Disk Unit | | S | S | S |
7128 DASD Expansion Unit | B | B | | |
7130 Expansion Unit Tape/Cage | | S | | |
8180 Opt Base 512MB Main Storage | | | B | B |
8191 Opt Base 512MB Main Storage | | | M | M |
8192 Opt Base 1024MB Main Storage | | | B | B |
8193 Opt Base 2048MB Main Storage | | | B | B |
8617 Opt Base 8.58GB 10k rpm Disk | | | S | S |
8618 Opt Base 17GB 10k rpm Disk | | | S | S |
8664 Opt Base Fiber DD Intf | | | S | S |
8713 Opt Base 8.58GB Disk Unit | | | B | B |
8714 Opt Base 17.54GB Disk Unit | | | S | S |
8813 Opt Base 8.58GB Disk Unit | S | S | | |
8818 Opt Base 17GB 10k rpm Disk | | | S | S |
8824 Opt Base 17.54GB Disk Unit | S | S | | |
Features Supported by Migration Only
Feature | Model | Model | Model | Model |Number Description | S10 | S20 | S30 | S40 |
---- --------------------------------|-------|-------|-------|-------|0031 Low-Speed Modem | S | S | S | S |
0329 V.24/EIA232 80-Ft Cable | | S | S | S |
0332 V.24/EIA232 20-Ft Enh Cable | | S | S | S |
0333 V.24/EIA232 50-Ft Enh Cable | | S | S | S |
0334 V.24/EIA232 80-Ft Enh Cable | | S | S | S |
0350 V.24/EIA232 20-Ft Enh PCI Cable | S | S | | |
0351 V.24/EIA232 50-Ft Enh PCI Cable | S | S | | |
0352 V.24/EIA232 80-Ft Enh PCI Cable | S | S | | |
0357 V.36 50-Ft PCI Cable | S | S | | |
1379 1.2GB 1/4-Inch Tape Kit | | S | | |
1380 2.5GB 1/4-Inch Tape Kit | | S | | |
1602 Single Disk Unit Kit (1.03GB) | | S | | |
1603 Single Disk Unit Kit (1.96GB) | | S | | |
2617 Ethernet/IEEE 802.3 CSMA/CD | | S | S | S |
2618 Fiber Distributed Data Adapter | | S | S | S |
2619 16/4Mbps Token-Ring Adapter | | S | S | S |
2654 EIA 232/V.24 Two-Line 20E | | S | S | S |
2655 EIA 232/V.24 Two-Line 20 | | S | S | S |
2656 X.21 Two-Line 20 | | S | S | S |
2657 EIA 232/V.24 Two-Line 50E | | S | S | S |
2658 EIA 232/V.24 Two-Line 50 | | S | S | S |
2659 X.21 Two-Line 50 | | S | S | S |
2663 I/O Attachment Processor | | S | S | S |
2665 Copper Dist Data Interface | | S | S | S |
2666 Frame Relay Adapter | | S | S | S |
2668 AS/400 Wireless LAN Adapter | | S | S | S |
5060 Bus Extension Tower | | | S | S |
5061 Storage Expansion Tower | | | S | S |
5062 Sys Unit Exp Tower(Optical) | | | S | S |
5063 Sys Unit Exp Tower(Copper) | | | S | S |
5070 266Mbps Sys Unit Exp Tower | | | S | S |
5071 266Mbps Sys Unit Exp Tower | | S | S | S |
5072 1063Mbps Sys Unit Exp Tower | | M | M | M |
5080 266Mbps Storage Exp Tower | | | S | S |
5081 266Mbps Storage Exp Tower | | S | S | S |
5082 1063Mbps Storage Exp Tower | | M | M | M |
6050 Twinaxial Workstation Ctlr | | S | S | S |
6135 Diskette Unit (5 1/4-Inch) | | S | | |
6146 Diskette Adapter | | S | S | S |
6153 V.35 One-Line (20-Ft Cable) | | S | S | S |
6173 V.35 One-Line (50-Ft Cable) | | S | S | S |
6368 1.2GB 1/4-Inch Cart Tape | | | S | S |
6369 2.5GB 1/4-Inch Cart Tape | | | S | S |
6380 2.5GB 1/4-Inch Cart Tape | | S | S | S |
6390 7GB 8mm Cartridge Tape | | S | M | M |
6490 7GB 8mm Cartridge Tape | S | S | | |
6500 DASD Controller | | S | S | S |
6502 Disk Unit Ctlr for RAID | | M | S | S |
6509 Addl 16MB FSIOP Memory | | S | S | S |
6512 Disk Unit Ctlr for RAID | | S | S | S |
6516 16MB One-Port FSIOP | | M | S | S |
6517 32MB One-Port FSIOP | | M | S | S |
6518 48MB One-Port FSIOP | | M | S | S |
6519 64MB One-Port FSIOP | | M | S | S |
6520 Upgrade 1 to 2-Port FSIOP | | S | S | S |
6526 16MB Two-Port FSIOP | | M | S | S |
6527 32MB Two-Port FSIOP | | M | S | S |
6528 48MB Two-Port FSIOP | | M | S | S |
6529 64MB Two-Port FSIOP | | M | S | S |
6530 Storage Device Controller | | M | S | S |
6605 1.03GB Disk Unit | | M | M | M |
6606 1.96GB Disk Unit | | S | S | S |
6607 4.19GB Disk Unit | | M | M | M |
6650 Addl Disk Unit (1.96GB) | | M | M | M |
6652 Addl Disk Unit (1.03GB) | | M | M | M |
6806 1.96GB Disk Unit | S | S | | |
6906 1.96GB Disk Unit | | S | M | M |
7607 Opt Base 4.19GB Disk Unit | | | S | S |
7713 Opt Base 8.58GB Disk Unit | | | S | S |
8172 32MB Base Main Storage Repl | S | | | |
8210 Optional 64MB Main Storage | S | | | |
8665 Opt Base Shielded DD Intf | | | S | S |
8716 Optional 16MB One-Port FSIOP | | | S | S |
8717 Optional 32MB One-Port FSIOP | | | S | S |
8718 Optional 48MB One-Port FSIOP | | | S | S |
8719 Optional 64MB One-Port FSIOP | | | S | S |
8726 Optional 16MB Two-Port FSIOP | | | S | S |
8727 Optional 32MB Two-Port FSIOP | | | S | S |
8728 Optional 48MB Two-Port FSIOP | | | S | S |
8729 Optional 64MB Two-Port FSIOP | | | S | S |
|
|
|
|
AS/400e servers are best for
workstation-centric computing needs where data, processing, and presentation
are done by programmable workstations.
AS/400e systems are best for host-centric
computing needs where data is stored and managed by a single system,
application processing and screen processing are done by the same system, and
screen information is sent to workstations to be displayed without further
processing. The workstations can be non-programmable terminals or PCs running
emulation programs.
AS/400e custom mixed-mode servers are
particularly suited for environments with the following characteristics:
- Coexisting (significant interactive) mixed-workloads in a single
footprint
- Need for higher interactive processing capabilities than existing
AS/400 Advanced Server models provide
- Importance placed on high-reliability
- Importance placed on upgradability (investment protection)
|
|
|
|
Model Summary Matrix
Model S10 Summary
Processor Feature #2118 #2119
(Uni) (Uni)
----- -----
Relative System Performance (CPW)
Client/Server Environment 45.4 73.1
Interactive Environment 16.2 24.4
Main Storage (MB)
Minimum 64 128
Maximum 384 512
DASD Capacity (GB)
Minimum 4.19 4.19
Maximum 175.4 175.4
Communication Lines 1-8 1-8
LAN Ports 1-3 1-3
Twinaxial Controllers 0-1 0-1
Maximum Twinaxial Workstations 28 28
1/4-Inch/8mm Cartridge Tape 0-1 0-1
1/2-Inch Tape
9348 0-1 0-1
3XXX (Except 3480/3490/3490E-C10) 0-1 0-1
8mm Cartridge Tape (External) 0-1 0-1
Optical Libraries 0-1 0-1
Notes:
· Relative system performance measurements (CPW values) are based on AS/400 environment, commercial processing workload (CPW). The CPW workload is representative of commercial applications, particularly those that do significant database processing in conjunction with journaling and commitment control. The CPW workload is measured on maximum configurations. CPW values may not be realized in all environments.
- Capacities shown are for models shipped from the plant and include
any prerequisite expansion features. Some combinations of devices may be
subject to configuration restrictions.
Model S20 Summary
Processor Feature #2161 #2163 #2165 #2166
(Uni) (Uni) (2-Way) (4-Way)
----- ----- ------- -------
Relative System Performance (CPW)
Client/Server Environment 113.8 210.0 464.3 759.0
Interactive Environment 31.0 35.8 49.7 56.9
Main Storage (MB)
Minimum 256 256 256 256
Maximum 2048 2048 4096 4096
DASD Capacity (GB)
Minimum 4.19 4.19 4.19 4.19
Maximum 944.8 944.8 944.8 944.8
Communication Lines 1-96 1-96 1-96 1-96
LAN Ports 1-16 1-16 1-16 1-16
Twinaxial Controllers 0-1 0-1 0-1 0-1
Maximum Twinaxial Workstations 28 28 28 28
ASCII Controllers 0-2 0-2 0-2 0-2
Maximum ASCII Workstations 28 28 28 28
Maximum Workstation Controllers 2 2 2 2
1/4-Inch/8mm Cartridge Tape 0-17 0-17 0-17 0-17
1/2-Inch Tape
2440/9348 0-6 0-6 0-6 0-6
3XXX 0-6 0-6 0-6 0-6
8mm Cartridge Tape (External) 0-4 0-4 0-4 0-4
Diskette (8 or 5 1/4-Inch) 0-2 0-2 0-2 0-2
Optical Libraries 0-14 0-14 0-14 0-14
Fax IOPs 0-32 0-32 0-32 0-32
Notes:
· Relative system performance measurements (CPW values) are based on AS/400 environment, commercial processing workload (CPW). The CPW workload is representative of commercial applications, particularly those that do significant database processing in conjunction with journaling and commitment control. The CPW workload is measured on maximum configurations. CPW values may not be realized in all environments.
- Capacities shown are for models shipped from the plant and include
any prerequisite expansion features. Some combinations of devices may be
subject to configuration restrictions.
Model S20 Custom Mixed-Mode e-Server
Summary
Processor Feature #2170 #2177 #2178
(2-Way) (4-Way) (4-Way)
------- ------- -------
Relative System Performance (CPW)
Client/Server Environment 464.3 759.0 759.0
Interactive Environment 49.7 110.7 221.4
Main Storage (MB)
Minimum 256 256 256
Maximum 4096 4096 4096
DASD Capacity (GB)
Minimum 4.19 4.19 4.19
Maximum 944.8 944.8 944.8
Communication Lines 1-96 1-96 1-96
LAN Ports 1-16 1-16 1-16
Twinaxial Controllers 0-60 0-60 0-60
Maximum Twinaxial Workstations 2388 2388 2388
ASCII Controllers 0-58 0-58 0-58
Maximum ASCII Workstations 1044 1044 1044
Maximum Workstation Controllers 60 60 60
1/4-Inch/8mm Cartridge Tape 0-17 0-17 0-17
1/2-Inch Tape
2440/9348 0-4 0-4 0-4
3XXX 0-4 0-4 0-4
8mm Cartridge Tape (External) 0-4 0-4 0-4
Diskette (8 or 5 1/4-Inch) 0-2 0-2 0-2
Optical Libraries 0-14 0-14 0-14
Fax IOPs 0-32 0-32 0-32
Notes:
· Relative system performance measurements (CPW values) are based on AS/400 environment, commercial processing workload (CPW). The CPW workload is representative of commercial applications, particularly those that do significant database processing in conjunction with journaling and commitment control. The CPW workload is measured on maximum configurations. CPW values may not be realized in all environments.
- Capacities shown are for models shipped from the plant and include
any prerequisite expansion features. Some combinations of devices may be
subject to configuration restrictions.
- Additional performance data based on standard benchmarks can be
obtained through the following Web pages:
- Baan
http://www.baan.com
- IBS
http://www.ibs.se
- Infinium
http://www.infinium.com
- Intentia
http://www.intentia.com
- JBA
http://www.jba.co.uk
- J.D. Edwards
http://www.jdedwards.com
- MAPICS
http://www.mapics.com
- SSA
http://www.ssax.com
Model S30 Summary
Processor Feature #2257 #2258 #2259 #2260
(Uni) (2-Way) (4-Way) (8-Way)
----- ------- ------- -------
Relative System Performance (CPW)
Client/Server Environment 319.0 583.3 998.6 1794.0
Interactive Environment 51.5 64.0 64.0 64.0
Main Storage (MB)
Minimum 512 512 512 1024
Maximum 16384 16384 16384 24576
DASD Capacity (GB)
Minimum 4.19 4.19 4.19 4.19
Maximum 1340.0 1340.0 1340.0 1340.0
Communication Lines 1-200 1-200 1-200 1-200
LAN Ports 1-32 1-32 1-32 1-32
Twinaxial Controllers 0-1 0-1 0-1 0-1
Maximum Twinaxial Workstations 28 28 28 28
ASCII Controllers 0-2 0-2 0-2 0-2
Maximum ASCII Workstations 28 28 28 28
Maximum Workstation Controllers 3 3 3 3
1/4-Inch/8mm Cartridge Tape 0-17 0-17 0-17 0-17
1/2-Inch Tape
2440/9348 0-4 0-4 0-4 0-4
3XXX 0-10 0-10 0-10 0-10
8mm Cartridge Tape (External) 0-4 0-4 0-4 0-4
Diskette (8 or 5 1/4-Inch) 0-2 0-2 0-2 0-2
Optical Libraries 0-22 0-22 0-22 0-22
Fax IOPs 0-32 0-32 0-32 0-32
Notes:
· Relative system performance measurements (CPW values) are based on AS/400 environment, commercial processing workload (CPW). The CPW workload is representative of commercial applications, particularly those that do significant database processing in conjunction with journaling and commitment control. The CPW workload is measured on maximum configurations. CPW values may not be realized in all environments.
- Capacities shown are for models shipped from the plant and include
any prerequisite expansion features. Some combinations of devices may be
subject to configuration restrictions.
Model S30 Custom Mixed-Mode e-Server
Summary
Processor Feature #2320 #2321 #2322
(4-Way) (8-Way) (8-Way)
------- ------- -------
Relative System Performance (CPW)
Client/Server Environment 998.6 1794.0 1794.0
Interactive Environment 215.1 386.4 579.6
Main Storage (MB)
Minimum 512 1024 1024
Maximum 16384 24576 24576
DASD Capacity (GB)
Minimum 4.19 4.19 4.19
Maximum 1340.0 1340.0 1340.0
Communication Lines 1-200 1-200 1-200
LAN Ports 1-32 1-32 1-32
Twinaxial Controllers 0-175 0-175 0-175
Maximum Twinaxial Workstations 7000 7000 7000
ASCII Controllers 0-175 0-175 0-175
Maximum ASCII Workstations 3150 3150 3150
Maximum Workstation Controllers 175 175 175
1/4-Inch/8mm Cartridge Tape 0-17 0-17 0-17
1/2-Inch Tape
2440/9348 0-4 0-4 0-4
3XXX 0-8 0-8 0-8
8mm Cartridge Tape (External) 0-4 0-4 0-4
Diskette (8 or 5 1/4-Inch) 0-2 0-2 0-2
Optical Libraries 0-22 0-22 0-22
Fax IOPs 0-32 0-32 0-32
Notes:
· Relative system performance measurements (CPW values) are based on AS/400 environment, commercial processing workload (CPW). The CPW workload is representative of commercial applications, particularly those that do significant database processing in conjunction with journaling and commitment control. The CPW workload is measured on maximum configurations. CPW values may not be realized in all environments.
- Capacities shown are for models shipped from the plant and include
any prerequisite expansion features. Some combinations of devices may be
subject to configuration restrictions.
- Additional performance data based on standard benchmarks can be
obtained through the following Web pages:
- Baan
http://www.baan.com
- IBS
http://www.ibs.se
- Infinium
http://www.infinium.com
- Intentia
http://www.intentia.com
- JBA
http://www.jba.co.uk
- J.D. Edwards
http://www.jdedwards.com
- MAPICS
http://www.mapics.com
- SSA
http://www.ssax.com
Model S40 Summary
Processor Feature #2256 #2261 #2207 #2208
(8-Way) (12-Way) (8-Way) (12-Way)
------- -------- ------- --------
Relative System Performance (CPW)
Client/Server Environment 1794.0 2340.0 3660.0 4550.0
Interactive Environment 64.0 64.0 120.0 120.0
Main Storage (MB)
Minimum 1024 1024 1024 1024
Maximum 32768 32768 40960 40960
DASD Capacity (GB)
Minimum 4.19 4.19 4.19 4.19
Maximum 2095.9 2095.9 2095.9 2095.9
Communication Lines 1-300 1-300 1-300 1-300
LAN Ports 1-72 1-72 1-72 1-72
Twinaxial Controllers 0-1 0-1 0-1 0-1
Maximum Twinaxial Workstations 28 28 28 28
ASCII Controllers 0-2 0-2 0-2 0-2
Maximum ASCII Workstations 28 28 28 28
Maximum Controllers 3 3 3 3
1/4-Inch/8mm Cartridge Tape 0-17 0-17 0-17 0-17
1/2-Inch Tape
2440/9348 0-4 0-4 0-4 0-4
3XXX 0-14 0-14 0-14 0-14
8mm Cartridge Tape (External) 0-4 0-4 0-4 0-4
Diskette (8 or 5 1/4-Inch) 0-2 0-2 0-2 0-2
Optical Libraries 0-22 0-22 0-22 0-22
Fax IOPs 0-32 0-32 0-32 0-32
Notes:
· Relative system performance measurements (CPW values) are based on AS/400 environment, commercial processing workload (CPW). The CPW workload is representative of commercial applications, particularly those that do significant database processing in conjunction with journaling and commitment control. The CPW workload is measured on maximum configurations. CPW values may not be realized in all environments.
- Capacities shown are for models shipped from the plant and include
any prerequisite expansion features. Some combinations of devices may be
subject to configuration restrictions.
Model S40 Custom Mixed-Mode e-Server
Summary
Processor Feature #2340 #2341
(8-Way) (12-Way)
------- --------
Relative System Performance (CPW)
Client/Server Environment 3660.0 4550.0
Interactive Environment 1050.0 2050.0
Main Storage (MB)
Minimum 1024 1024
Maximum 40960 40960
DASD Capacity (GB)
Minimum 4.19 4.19
Maximum 2095.9 2095.9
Communication Lines 1-300 1-300
LAN Ports 1-72 1-72
Twinaxial Controllers 0-175 0-175
Maximum Twinaxial Workstations 7000 7000
ASCII Controllers 0-175 0-175
Maximum ASCII Workstations 3150 3150
Maximum Workstation Controllers 175 175
1/4-Inch/8mm Cartridge Tape 0-17 0-17
1/2-Inch Tape
2440/9348 0-4 0-4
3XXX 0-8 0-8
8mm Cartridge Tape (External) 0-4 0-4
Diskette (8 or 5 1/4-Inch) 0-2 0-2
Optical Libraries 0-22 0-22
Fax IOPs 0-32 0-32
Notes:
· Relative system performance measurement is based on AS/400 environment, commercial processing workload (CPW). The CPW workload represents commercial applications, particularly those that do significant database processing in conjunction with journaling and commitment control. The CPW workload is measured on maximum configurations. CPW values may not be realized in all environments.
- Capacities shown are for models shipped from the plant and include
any prerequisite expansion features. Some combinations of devices may be
subject to configuration restrictions.
- For performance data based on standard benchmarks, visit:
- Baan
http://www.baan.com
- IBS
http://www.ibs.se
- Infinium
http://www.infinium.com
- Intentia
http://www.intentia.com
- JBA
http://www.jba.co.uk
- J.D. Edwards
http://www.jdedwards.com
- MAPICS
http://www.mapics.com
- SSA
http://www.ssax.com
Maximum
Not applicable.
Customer Setup (CSU)
Model S10 initial installation, and some
designated features, are Customer Setup. Models S20, S30, and S40 initial
installation and feature installation will be performed by IBM service
representatives. Model upgrades on ALL models are performed by IBM service
representatives.
The customer is responsible for installation
of external cables, displays, printers, and modems. Customers who request IBM
service personnel to perform these activities are subject to a charge.
Customer responsibilities include:
· Adequate site and system planning and preparation.
- Receipt, unpacking, and placement of the system unit.
- Ordering, installing, and maintaining cables and associated parts
for attaching devices to the workstation controllers or IBM Token-Ring and
Ethernet network adapter.
- Using and following the problem determination procedures in the
operator's guide.
- Running the OS/400 problem determination procedures before calling
for service.
- Supplying the telephone line to be used with ECS.
Devices Supported
Racks
The following 9309 Rack configurations are
supported on the 9406 e-servers (except Model S10):
· 9309 #9171 - General Purpose I/O Rack with SPCN
- 9309 #9141 - General Purpose Expansion Rack
- Must be connected to a 9309 #9171 for power
control.
- The 9309 #9141 can be attached to all models if a jumper is
installed. Use of the jumper is only recommended when the rack is being
used for attaching external tape or diskette. Rack power control must be
performed manually. The jumper P/N is 93X0167 (some documentation calls
out 31F7631)
The following 9309 Rack configuration will
upgrade as a 9309 #9171.
- 9309 #9177 - 9332 Disk Unit Rack with SPCN
The following 9309 Rack configurations will
upgrade as 9309 #9141s.
- 9309 #9128 - 9335 Disk Unit Rack
- 9309 #9129 - I/O Expansion Rack
- 9309 #9130 - I/O Card Unit Rack
- 9309 #9277 - 9332 Disk Unit Rack
Note: Each system has the capability of supporting up to 36 SPCN attached
racks and/or towers. If more than 36 are required then rack 37 and up must be
connected using Power Control Cables. Contact IBM Rochester for Power Control
Cables.
Disk Units
The following disk units are supported on 9406
e-servers (except Model S10):
· 9337 Disk Unit Enclosure (withdrawn from marketing)
o Model 010
o Model 015
o Model 020
o Model 025
o Model 040
o Model 110
o Model 115
o Model 120
o Model 125
o Model 140
- 9337 Disk Unit Enclosure (withdrawn from marketing)
- Model 210
- Model 220
- Model 215
- Model 225
- Model 240
- Model 420
- Model 440
- Model 480
- Model 540/545
- Model 580/585
- Model 590/595
Models 210, 215, 220, 225, 240 and 480 will report as 212, 217, 222, 227, 242 and 482 respectively if specify code #0044 is installed on the 9337. The Model 420 will report as a 220 (222 if #0044 is installed) and the Model 440 reports as a 240 (242 if #0044 is installed).
- IBM Versatile Storage Server
The VSS is a new external disk subsystem that attaches to the AS/400. You gain the flexibility of attaching to multiple heterogeneous servers. On the AS/400, up to 1TB of disk storage is supported in each VSS unit in a non-shared mode.
The VSS attaches to AS/400 via the Tape/Disk Device Controller (#6501). OS/400 V3R1, or later, is required (PTFs are also required).
Tape Devices
The following tape devices are supported:
· 3490E - 1/2 Inch Cartridge Tape Subsystem
o Model C11/C1A/C22/C2A (withdrawn from marketing)
o Model E01/E11 (withdrawn from marketing)
o Model F00/F01/F11/F1A
- 3494 - Cartridge Tape Library
The 3494 is a stand alone tape library. It consists of a frame and robotics designed to mount and automatically load tape drives. The 3494 attaches to the 9402/9404/9406 via an RS232, Token Ring or Ethernet connection that controls the library function. There are four models of the 3494 available as follows:
- L10 Library Control Unit Frame 1 3490E C1A or
C2A.
- L12 Library Control Unit Frame 1-2 3590 B1As.
- D10 Device Frame 1 3490E C1A or C2A, 300 cartridges.
- D12 Device Frame 1-6 3590 B1A devices, 300
cartridges.
Note: The capacities shown for the number of devices that mount in the 3494 models are higher than an individual AS/400 can support; however, the 3494 can be attached to multiple systems at one time requiring the 3494 to have device limits higher than those of an individual AS/400.
- 3570 - 1/2 Inch Cartridge Tape Subsystem
- Model B00 (Standalone)
- Model B01 (Standalone with RACL)
- Model B02 (standalone with RACL)
- Model B11 (Rack Mount with RACL)
- Model B12 (rack mount with RACL)
- C00 (standalone)
- C01 (standalone with RACL)
- C02 (standalone with RACL)
- C11 (rack mount with RACL)
- C12 (rack mount with RACL)
- C1A (mounts into 3575 Library)
- 3575 Tape Library Dataserver
- L06 (1-2 devices with 60 cartridges)
- L12 (1-4 devices with 120 cartridges)
- L18 (1-6 devices with 180 cartridges)
- L24 (1-6 devices with 240 cartridges)
- L32 (1-6 devices with 324 cartridges)
- 3590 - 1/2-Inch Cartridge Tape Subsystem
- Model B11/E11 (Mount in 9309 Rack)
- Model B1A/E1A (Mount in 3494 Libraries)
- 7207 Model 122 SLR5 QIC External Tape Drive
- 7208 - 8mm Cartridge Tape Unit
- Model 012 (withdrawn from marketing)
- Model 222 (withdrawn from marketing)
- Model 232 (withdrawn from marketing)
- Model 234 (withdrawn from marketing)
- Model 342
- 9348 - 1/2 Inch Reel Tape Unit
- Model 001 (Rack Mount)
- Model 002 (Table Top)
- 9427 8mm Library Attach (withdrawn from marketing)
The 9427 is an 8mm library that attaches to #2621. Following are the models supported.
- Model 210 (standalone, 1-2 drives, up to 20
cartridges)
- Model 211 (rack mount, 1-2 drives, up to 20
cartridges)
Diskette Devices
The following Diskette Devices are supported
(except on Model S10):
· 9331 Diskette Unit (withdrawn from marketing)
o Model 011 8-inch Diskette Unit
o Model 012 5.25-inch Diskette Unit
Optical Storage Devices
The following optical storage devices are
supported:
· 3995 Optical Storage Subsystem
o 3995s attached directly:
§ Model C40
§ Model C42
§ Model C44
§ Model C46
§ Model C48
- 3995s attached with LAN:
- Model 023 (withdrawn from marketing)
- Model 123 (withdrawn from marketing)
- Model A23 (withdrawn from marketing)
- Model 112 (withdrawn from marketing)
- Model 113 (withdrawn from marketing)
- Model C20 52GB Multifunction Optical Library
Dataserver
- Model C22 135GB Multifunction Optical Library
Dataserver
- Model C24 270GB Multifunction Optical Library
Dataserver
- Model C26 405GB Multifunction Optical Library
Dataserver
- Model C28 671GB Multifunction Optical Library
Dataserver
Model Conversions
Upgrades to the SXX e-servers are no longer
available. The following upgrades within the SXX models are available.
Upgrades within Models S10 and S20
From: To:----- ---Model Model S10 Model S20
Processor 2118 2119 2161 2163 2165 2166
----- --------- ---- ---- ---- ---- ---- ----
S10 2118 X X X X
S10 2119 X X X X
S20 2161 X X X
S20 2163 X X
S20 2165 X
Upgrades within Model S30 and S40
From: To:----- ---Model Model S30 Model S40
Processor 2257 2258 2259 2260 2256 2261 2207 2208
----- --------- ---- ---- ---- ---- ---- ---- ---- ----
S20 2161 X X X
S20 2163 X X X
S20 2165 X X X X X X
S20 2166 X X X X X
S30 2257 X X X X X X
S30 2258 X X X X X X
S30 2259 X X X X X
S30 2260 X X X
S40 2256 X X X
S40 2261 X X
S40 2207 X
Upgrades within Model S20, S30, and S40
Custom Mixed-Mode e-Servers
From: To:----- ---Model Model S20 Model S30 Model S40
Processor 2170 2177 2178 2320 2321 2322 2340 2341
----- --------- ---- ---- ---- ---- ---- ---- ---- ----
S20 2170 X X X X
S20 2177 X X X X X X
S20 2178 X X X X
S30 2320 X X X X
S30 2321 X X X
S30 2322 X X
S40 2340 X
|
|
|
|
|
|
Physical Specifications
Dimension Weight
Width Depth Height Est. Maximum
----- ----- ------ -------------
Model S10
System Unit 330mm 934mm 610mm 69kg
Model S20
System Unit 704mm 934mm 1040mm 183kg
with Expansion Tower 625mm 1060mm 1040mm 306kg
Model S30
System Unit 565mm 1320mm 1434mm 400kg
with Storage Expansion Unit 565mm 1320mm 1577mm 400kg
Model S40
System Unit 565mm 1320mm 1577mm 371kg
Expansion Tower (#9251) 485mm 925mm 750mm 114kg
with Storage Expansion Unit 485mm 925mm 950mm 156kg
Expansion Towers (not available on the Model S10)
Expansion Tower 485mm 925mm 750mm 136kg
with Storage Expansion Unit 485mm 925mm 950mm 182kg
#5065 Storage/PCI Expansion
Tower 485mm 920mm 910mm 280kg
(With rounded back cover) 1075mm
Operating Environment
- Temperature: 10 to 38C (50 to 100F)
- Relative Humidity: 8% to 80%(1)
- Wet Bulb: 23C (73.4F)
Note: (1) All tape media used on the 9406 have a relative humidity range of
20% to 80%.
Voltage:
Model S10 system units can operate at either
low voltage (100-127 VAC) or high voltage (200-240 VAC). Models S20, S30, and
S40 system units operate at high voltage. Expansion towers #5070, #5072, #5080,
and #5082 can operate at either low voltage or high voltage. Expansion towers
#9251, #5071, #5073, #5081, and #5083 operate at high voltage.
The appropriate system power cord is added
automatically by the configurator based on the three-digit country code on the
order. Refer to the "AS/400 Physical Planning Reference," (SA41-5109)
for your default power cord, other power cord options, and additional technical
planning information. For upgrades, consult SA41-5109. to make sure no changes
to your power distribution system are required.
Limitations
Not applicable.
Hardware Requirements
The minimum operable and serviceable system
configuration consists of a system unit and a system console.
The system requires AS/400 Licensed Internal
Code. The Licensed Internal Code is preloaded on the system disk storage unit.
The system console may be any supported
display or IBM-compatible personal computer emulating a supported display. The
system console should be located within 6 meters (20 feet) of the operator's
panel, and the operator's panel must be viewable from the display.
Although a printer is not required for
service, IBM's ability to diagnose the system and perform upgrades is greatly
enhanced when a printer is available.
Although not required for hardware service,
IBM's ability to service the system is greatly enhanced when a voice telephone
is available within view of the system. The telephone must not be connected to
phone mail or an answering machine, since the ability to receive calls on this
telephone is important in the event support personnel need to reach the IBM
representative. This telephone line is in addition to the one needed for ECS.
A high-speed modem, IBM 7852 or equivalent, is
required for ECS.
Software Requirements
AS/400e servers require the support of OS/400
V4R1, or later. Some features may require a later release of OS/400. Refer to
individual feature descriptions.
Back to top
|
|
|
|
For a current list of publications contact
your local IBM representative.
Back to top
|
|
|
|
No Charge Specify Codes
Disk Protection
(#0040) Mirrored System Disk Level Protection
When added to an order, this specify code will
cause the order to fail if sufficient disk units are not ordered to support
device level mirrored protection. On upgrade orders, a warning message will be
generated during installation of the upgrade if sufficient disk units are not
available to support device level protection across the system.
#0040 requires all disk units to be placed
into mirrored pairs. The load source must be controlled by the MFIOP and must
be mirrored to a like disk unit also attached to the MFIOP. The minimum number
of disks allowed on a system is two.
(#0042) Mirrored System IOP Level Protection
When added to an order, this specify code will
cause the order to fail if sufficient disk units and IOPs are not included on
the order to support IOP level mirrored protection. On upgrade orders, a
warning message will be generated during installation of the upgrade if
sufficient disk units and IOPs are not available to support IOP level
protection across the system.
#0042 requires all disk units to be placed
into mirrored pairs. Each mirrored pair of disk units must be on separate disk
unit IOPs. The load source must be controlled by the MFIOP and must be mirrored
to a like disk unit also attached to the MFIOP (#0040 protection). The minimum
number of disks allowed on a system is four.
(#0043) Mirrored System BUS Level Protection
When added to an order, this specify code will
cause the order to fail if sufficient disk units, IOPs and expansion units are not
included on the order to support BUS level mirrored protection. On upgrade
orders, a warning message will be generated during installation of the upgrade
if sufficient disk units, IOPs and expansion units are not available to support
bus level protection across the system.
#0043 requires all disk units to be placed
into mirrored pairs. Each mirrored pair of disk units must be on separate SPD
buses. The load source must be controlled by the MFIOP and must be mirrored to
a like disk unit also attached to the MFIOP (#0040 protection). The minimum
number of disks allowed on a system is four.
(#0044) Device Parity Protection
When added to an order, this specify code will
cause the order to fail if a non-RAID configuration is ordered. This is the
default specify code for data protection.
#0044 requires that all internal disk units be
placed into RAID arrays using #2726, #2740, #2741, #6502, #6512, #6532, #6533,
or #9751. The rules for RAID can be found in the descriptions of these
features.
Ideally, all disk units should be put into a
RAID array. However, for upgrades only, in order to maintain compatibility with
upgrade systems that did not have the ability to put the load source file into
a RAID array the marketing configurators will allow up to four non-RAID disks
to be configured with #0044. The four non-RAID disks must be mirrored. The
definition of a non-RAID disk is (1) an old disk that can't be put into a RAID
array because it technically doesn't work or (2) a new disk that can't be put
into a RAID array because there aren't enough disks for a valid RAID array.
Alternate IPL
Licensed Internal Code (LIC) for AS/400
e-series models will be distributed on CD-ROM media.
The configurator will verify that a tape or
migrated tape specify has been selected. If not, the order will fail with a
message explaining that without a tape device the save/restore capability of
the system is jeopardized.
In order to ensure that availability of
ALT-IPL capability, the configurator will validate that the system has an ALT-IPL
specify code.
One of the following specify codes is required
on a AS/400 systems to identify the alternate IPL device, otherwise base
validation will fail. The alternate IPL specify code indicates that the IOP
used to control the tape device must be placed into the system unit. Model S10
does not have an alternate IPL device.
Specify
Code Description------------------------------------------------
#5504 Alternate IPL Specify for 3490 EXX/FXX#5505 Alternate IPL Specify for 2440#5506# Alternate IPL Specify for QIC-4000#5507 Alternate IPL Specify for 9348#5508 Alternate IPL Specify for 3422#5509 Alternate IPL Specify for 3430#5511 Alternate IPL Specify for 3480#5512 Alternate IPL Specify for 3490 C10,11,22#5513 Alternate IPL Specify for 3490#5514% Alternate IPL Specify for 8mm#5515 Alternate IPL Specify for 3570#5516# Alternate IPL Specify for QIC-1000#5517%# Alternate IPL Specify for QIC-2500
#5518%# Alternate IPL Specify for QIC-13000
#5519 Alternate IPL Specify for 3590#5531 Alternate IPL Specify for 16GB/30GB#5536 Alternate IPL Specify for 25GB Tape#5537 Alternate IPL Specify for 3580Note: % Only allowed on S10 orders with #5006 (Backup Tape - Preload SW) # Not allowed if #0095 or #0096 is the only tape specifyThe configurator supports changes to the
alternate IPL device by removing the installed 55XX code and adding the new
55XX code.
Device Attachment
- #0007 3570-B1x Rack/Dedicated IOP
- #0008 7208 Ultra SCSI Attachment
- #0009 3995 Ultra SCSI Attachment
- #0018 2440-xxx Lcl Src Rack Mnt
- #0019 3995 Optical Library Attch
- #0021 7208-xxx Lcl Src Stnd Alon
- #0022 9348-001 Lcl Src Rack Mnt
- #0023 3490-E01 Lcl Src Stnd Alon
- #0024 9348-002 Lcl Src Stnd Alon
- #0025 3570-B1x/C1x Rack/Dedicated IOP
- #0026 3490-CxA Lcl Src Libry Mnt
- #0027 3490-Cxx Shared
- #0028 3490-Cxx Lcl Src Rack Mnt
- #0029 9347-xxx Lcl Src Rack Mnt
- #0035 9427-210 Lcl Src Stnd Alon
- #0036 3490-E11 Lcl Src Rck Mnt
- #0037 3590-B11 Lcl Src Rck Mnt
- #0038 3590-B11/B1A Shared
- #0039 9427-211 Lcl Src Rck Mnt
- #0046 OptiConnected System
- #0051 3570-x11 Fld Mrg Rck Mnt
- #0052 3590-B1A Lcl Src Libry Mnt
- #0054 3490-E11 Lcl Src Side Mnt
- #0055 9427-211 Lcl Src Side Mnt
- #0056 3590-B11 Lcl Src Side Mnt
- #0057 9309-002 Lcl Src SPCN Rack
- #0058 9309-002 Lcl Src Rack
- #0063 3490-F11 Lcl Src/Fld Mrg
- #0064 3490-FXX SCSI Lib Mnt Attch
- #0065 3490-Cxx SCSI Lcl Src RkMt
- #0066 3490-Cxx SCSI Remote Attch
- #0067 3490-Cxx SCSI Library Mnt
- #0082 3570-x0x Fld Mrg Std Aln
- #0084 3570-C1X Rack Mount Attch
- #0085 3570 C Drive in 3575 Library
- #0087 7207-122 Attachment
- #0088 OptiConnect Cluster Specify
- #0091 7133-xxx Attachment
- #0120 7210-020 Attachment
(#0095) Lcl Src Tape w/SPD Ctlr
(For IBM US, No Longer Available as of
December 28, 2001)
This specify code satisfies the system
requirement of having a tape or external tape controller. Specify code #0095
reserves a card position for an external tape controller. It is assumed that
this controller is used by a customer sourced external tape. Any additional
tapes or customer sourced codes work independently of this code.
This specify code does not count towards any
controller limits in the configurators, but it does satisfy the requirement for
having a tape on the system. Maximum: Limited only by the number of SPD slots
for tape IOPs
Field upgrades are not allowed to systems with
#0095 on the install record. Specify code #0095 must be removed, and the
correct tape and controller added to the installed machine record.
(#0096) Lcl Src Tape w/PCI Ctlr
(For IBM US, No Longer Available as of
December 28, 2001)
This specify code satisfies the system
requirement of having a tape or external tape controller. Specify code #0096
reserves a card position for an external tape controller. It is assumed that this
controller is used by a customer sourced external tape. Any additional tapes or
customer sourced codes work independently of this code.
This specify code does not count towards any
controller limits in the configurators, but it does satisfy the requirement for
having a tape on the system. Maximum: Limited only by the number of PCI slots
for tape controllers.
Field upgrades are not allowed to systems with
#0096 on the install record. Specify code #0096 must be removed, and the
correct tape and controller added to the installed machine record.
(#5544) Sys Console on Op Console
Enables use of a PC as a remote system console
and control panel. Operations Console Cable (#0328) is required to attach to
the Base Multi-Protocol Communications Adapter (#9699). #9699 is installed in
the MFIOP of the remote system. OS/400 V4R3, or later, is required. Remote
control panel function is also available when #5544 is specified by ordering
the Remote Control Panel Cable (#0380 or #0381). #5544 is the default for Models
S30 and S40. Maximum: One.
System Install Method
(#0200) Replacing the Release Install
(For IBM US, No Longer Available as of May 31,
1999)
This no-charge specify code denotes that the
upgrade will be done via the Replacing the Release Install method. This upgrade
method may be used for upgrading systems running OS/400 V2R3 through V3R2. The
Replacing the Release Install method is based on user objects remaining on the
disk units throughout the upgrade process. All supported disk units are
retained in the upgrade to the RISC system. Prior to upgrading the hardware,
the Disk Preparation Utility must be run to prepare the disk units on the prior
release system for the new 4KB page size. All necessary object conversions are
done by the system as part of the upgrade. This is the preferred approach for
larger systems when all disk units will be moved to the RISC system. The
Replacing the Release Install method reduces potential problems caused by
save/restore and tape handling. It is the method most commonly used by AS/400
customers.
(#0201) Unload/Reload Release Install
(For IBM US, No Longer Available as of May 31,
1999)
This no-charge specify code denotes the
upgrade will be done via the Unload/Reload Release Install method. This method
consists of unloading user applications and data to tape, upgrading the
hardware to a Power PC system, installing OS/400, and reloading the user
applications and data. This approach is attractive for smaller systems, and
reduces upgrade time compared to replacing the release. It may also be an
effective method for upgrading common programs and files on multiple systems.
This feature is only allowed on IMPI to RISC upgrades.
(#0202) Staged Upgrade Offering
(For IBM US, No Longer Available as of May 31,
1999)
This priced option provides an upgrade option
that uses the upgrade hardware components to translate and validate user
applications prior to the actual upgrade, using either #0200 or #0201 methods.
This priced offering requires careful advanced planning. AS400 Road Map for
Changing to PowerPC Technology (SA41-4150) describes this offering in detail.
IBM services are also available for a charge. This feature is only allowed on
IMPI to RISC upgrades.
(#0203) Side by Side Install
(For IBM US, No Longer Available as of July 2,
2002)
This no-charge specify code is used to alert
IBM service representatives of the intention to install a new system
concurrently with an existing system, and over time, move applications to the
new system. This method may be used when adding a system to an existing complex
or network, or when a replaced system is being moved to another location. AS400
Road Map for Changing to PowerPC Technology (SA41-4150) describes this option
in detail. IBM services are also available for a charge. #0203 is not allowed
if #0400, #0420, #0430, or #5000 is on order.
(#0204) Staged Side by Side Upgrade
(For IBM US, No Longer Available as of May 31,
1999)
#0204 is a no-charge specify code denoting
that the upgrade will be done via the Staged Side by Side Upgrade method. #0202
is required on the order and indicates that IBM will provide the base CEC
required to translate and validate user applications prior to the actual
upgrade. #0204 indicates that the customer will be purchasing enough disk
storage (and other features if necessary) to completely duplicate the disk
storage of their production IMPI machine. #0204 also indicates that the upgrade
will be performed using a method similar to the Side by Side Install method
(#0203). This offering requires careful advanced planning. AS400 Road Map for
Changing to PowerPC Technology (SA41-4150) describes this offering in detail.
IBM services are also available for a charge. Prerequisite: #0202 - Staged
Upgrade Offering.
Line Cords
Each system requires that a line cord be
specified. CEC line cords are specified separately from the expansion towers.
(#2960) 120V/15A 6-Ft Linecord
(For IBM US, No Longer Available as of
December 3, 2002)
#2960 specifies that each line cord for each
expansion tower (#5072 and #5082) be six feet long, 15 Amp, and 120V. Specify
codes #9080, #9082 and #9083 can be added in addition to #2960 to specify other
attributes of the line cord such as length and plug type. #2961 is not allowed
on the same order as #2960. #2960 is not available on Models S20, S30, and S40.
Maximum: One.
(#2961) 240V/10A 6-Ft Linecord
(For IBM US, No Longer Available as of
December 3, 2002)
#2961 specifies that each line cord for each
expansion tower (#5072 and #5082) be six feet long, 10 Amp, and 240V. Specify
codes #9080, #9082 and #9083 can be added in addition to #2961 to specify other
attributes of the line cord such as length and plug type. #2960 is not allowed
on the same order as #2961. #2961 is not available on Models S20, S30, and S40.
Maximum: One.
(#9080) Linecord Specify
(For IBM US, No Longer Available as of July 2,
2002)
#9080 is specified when a watertight line cord
is required. #9080 indicates that all expansion towers (#5072, #5073, #5082,
#5083 and #9251) installed will have a watertight line cord.
The prerequisite to #9080 for Model S20 system
units or #5072 and #5082 expansion units is #9082 or #2961. #9083 and #9080 are
mutually exclusive. Maximum: One.
(#9082) 14-Ft Linecord Specify
(For IBM US, No Longer Available as of July 2,
2002)
#9082 is specified when a 14-foot line cord is
required. #9082 indicates that all expansion towers (#5072, #5073, #5082, #5083
and #9251) installed will have a 14-foot line cord.
The prerequisite to #9082 for #5072 and/or
#5082 is #2960 or #2961. There are no prerequisites to #9082 for expansion
towers #5073, #5083 and #9251. #9083 can be on the same order as #9082.
Maximum: One.
(#9083) Locking Linecord Specify
(For IBM US, No Longer Available as of July 2,
2002)
#9083 is specified when a locking line cord is
required. #9083 indicates that system units (S10 and S20) and all expansion
towers (#5072, #5073, #5082, #5083 and #9251) installed will have a locking
line cord.
The prerequisite to #9083 for #5072 and/or
#5082 is #2960 or #2961. There are no prerequisites to #9083 for expansion
towers #5073, #5083 and #9251. #9082 can be on the same order as #9083. #9083
and #9080 are mutually exclusive. Maximum: One.
(#9180) Linecord Specify
(For IBM US, No Longer Available as of July 2,
2002)
#9180 is specified when a watertight line cord
is required on the system unit of Models S30 and S40. #9180 can be on the same
order with #9182. #9183 and #9180 are mutually exclusive. Maximum: One.
(#9182) 14-Ft Linecord Specify
(For IBM US, No Longer Available as of July 2,
2002)
#9182 is specified when a 14-ft line cord is
required on the system unit of Models S30 and S40. #9182 can be on the same
order with #9183 or #9180. Maximum: One.
(#9183) Locking Linecord Specify
(For IBM US, No Longer Available as of July 2,
2002)
#9183 is specified when a locking line cord is
required on the system unit of Models S30 and S40. #9183 can be on the same
order as #9182. #9183 and #9180 are mutually exclusive. Maximum: One.
System ID Regeneration
(#1311) System Unique Identifier
After 255 scratch installs the system ID
counter wraps and a new system ID must be created. Feature #1311 can be ordered
as an MES to regenerate a customers system ID.
Language Nomenclature
All system orders require a language specify
code. A language specify code is required on all model upgrade orders
regardless if one is already on the install record. Some codes may have country
specific usage.
- #2902 Estonian
- #2903 Lithuanian
- #2904 Latvian
- #2905 Vietnamese
- #2906 Lao
- #2909 Belgian English
- #2911 Slovenian
- #2912 Croatian
- #2913 Macedonian
- #2914 Serbian
- #2915 Polish
- #2916 Russian
- #2917 English U/L DBCS
- #2918 Slovakian
- #2919 Portuguese MNCS
- #2920 Farsi
- #2924 English
- #2928 French
- #2929 German
- #2930 Japanese Kanji
- #2931 Spanish
- #2932 Italian
- #2935 French Canadian
- #2938 English U/C DBCS
- #2939 German MNCS
- #2940 French MNCS
- #2941 Arabic
- #2942 Italian MNCS
- #2944 Icelandic
- #2950 English U/C SBCS
- #2956 Turkish
- #2957 Greek
- #2962 Traditional Chinese
- #2969 Korean
- #2972 Thai
- #2974 Bulgarian
- #2975 Czech
- #2976 Hungarian
- #2978 Portuguese
- #2979 Brazilian Portuguese
- #2980 UK English
- #2982 Finnish
- #2983 Norwegian
- #2984 Belgian French
- #2987 Swedish
- #2988 Dutch
- #2989 Belgian Dutch
- #2990 Hebrew
- #2992 Romanian
- #2993 Danish
- #2995 Albanian
- #2998 Chinese (PRC)
Software Preload
(#5000) SW Preload Required
Indicates that Preloaded software and/or
consolidated I/O is to ship with the initial order. A maximum of one (#5000) is
supported. This feature may have country specific usage.
(#5023) Software Version V4R1
(For IBM US, No Longer Available as of
November 30, 1998)
#5023 is required on all new orders with
OS/400 V4R1. #5023 is required on MES orders for V4R1 when #0200, #0201, #0202,
or #0204 are specified.
(#5024) Software Version V4R2
#5024 is required on all new orders with
OS/400 V4R2. #5024 is required on MES orders for V4R2 when #0200, #0201, #0202,
or #0204 are specified.
(#5025) Software Version V4R3
(For IBM US, No Longer Available as of
December 29, 2000)
#5025 is required on all new orders with
OS/400 V4R3. #5025 is required on MES orders for V4R2 when #0200, #0201, #0202,
or #0204 are specified.
(#5026) Software Version V4R4
(For IBM US, No Longer Available as of May 31,
2001)
#5026 is included on all new orders or
upgrades installing OS/400 V4R4.
(#5027) Software Version V4R5
(For IBM US, No Longer Available as of July 2,
2002)
#5027 is included on all new orders or
upgrades installing OS/400 V4R5.
(#5028) Software Version V5R1
(For IBM US, No Longer Available as of
November 21, 2003)
#5028 is included on all new orders or
upgrades installing OS/400 V5R1.
(#5029) Software Version V5R2
#5029 is included on all new orders or
upgrades installing OS/400 V5R2.
Miscellaneous
(#0002) Customer Install MES
This feature is used to indicate that customer
involvement is required to install this MES on the Model S10. This code drives
translated customer installation instructions, MES package labeling, and
indicates that an IBM CE should not automatically be dispatched to install the
MES. The order configurators will place this specify on orders when required.
(#0003) Non-Customer Install MES
This feature is used to indicate that CE
involvement is required to install this MES. This feature drives CE
installation instructions, MES package labeling, and indicates that an IBM CE
should be dispatched to install the MES.
(#0006) LPAR Restrict Build Process
Added to an initial order system where logical
partitioning (LPAR)(#0140) is requested. This code instructs manufacturing to
only load SLIC on the minimum number of DASD files (ie. do not spread across
all available DASD units.
Mutually exclusive with #5000 SW Preload, or
any Solution Developer Preloads.
Prerequisite: #0140 (Logical Partitioned
System). Maximum: One.
(#0140) Logical Partitioned System
#0140 is specified to indicate the number of
logical partitions desired for a system implementing logical partition (LPAR)
support. For a system to use logical partitions, it must have a multi-processor
(2-way, 4-way, 8-way, or 12-way). The following processors, by model, support
logical partitions. The maximum number of logical partitions supported is shown
in parenthesis following each processor.
- Model S20 - #2165(2)/#2166(4)/#2170(2)/#2177(4)/#1781(4)
- Model S30 - #2258(2)/#2259(4)/#2260(8)/#2320(4)/#2321(8)/#2322(8)
- Model S40 -
#2207(8)/#2208(12)/#2256(8)/#2261(12)/#2340(8)/#2341(12)
If logical partitioning is designated, the
configurator will request the total number of partitions desired on the system,
including the primary partition. The valid number of #0140 specify codes is
from two to 12. The configurator will then validate that the number of load
source IOPs, and the total number of workstation controllers (adapters) and
console cables are equal to the number of logical partitions specified.
The first time logical partitioning is
designated, the configurator will default one #2624/#2748 controller for each
feature CD-ROM specified, up to the maximum number of controllers per system.
After reaching this controller maximum, additional feature CD-ROMs may be
added. The defaulted #2624/#2748 controllers may be removed from the order if
not needed.
(#0213) Development/Demonstration Discount Program
This feature is used to indicate that the
system or feature being ordered qualifies for discount under the development
discount program or the demonstration discount program.
(#0320) Luxembourg Specify
#0320 is used to enable correct ordering of
modem and hardware for #2664. This feature may have country specific usage.
(#0321) Ireland Specify
#0321 is used to enable correct ordering of
modem and hardware for #2664. This feature may have country specific usage.
(#0322) Iceland Hardware
(For IBM US, No Longer Available as of
November 21, 2003)
#0322 is used to enable correct ordering of
Iceland specific modem and hardware. This feature may have country specific
usage.
(#0999) Verify System Power
(For IBM US, No Longer Available as of
November 21, 2003)
#0999 indicates that one or more towers and or
racks may not have enough power if IOPs, tapes and disks are not properly
distributed among the available towers. #0999 generates instructions for
placing cards, tapes and disks.
(#1310) System for Redistribution
Indicates that shipment is for a third party
and inhibits shipment of password with order.
(#5001) Customer Solution Center
Indicates that machine is to be routed to the
Customer Solution Center at time of manufacture. Multiple #5001s are allowed on
the records. This feature may have country specific usage.
(#5002) AS/400 CDSC-Rochester MFG
Indicates that machine is to be routed to the
CDSC. This feature may have country specific usage.
(#9119) Migrated Disk Units
(For IBM US, No Longer Available as of July 2,
2002)
When #9119 is on an order the customer is
assumed to have migrated (customer Sourced) disk units. Because the migrated
disk units may not have been added to the system records manufacturing must not
perform mirroring checks.
(#9902) Do Not Integrate
(For IBM US, No Longer Available as of July 2,
2002)
#9902 is added to an order by the configurator
so that manufacturing does not integrate the device into a rack, etc. The
device with #9902 must be shipped in its own packaging.
Special Feature Codes -- Chargeable
Features can be added and removed from AS/400
models. This is typically accomplished through three methods: Feature
exchanges, feature conversions and straight add/removes.
Feature exchanges involve the sale of one or
more parts and the return of one or more parts (unless otherwise noted).
Feature exchanges are typically used for main storage transactions where a
credit may be given for some exchanges on selected models, upon the return of
installed IBM main storage cards.
Feature conversions are generated when it is
necessary to change a feature number either as a result of physically modifying
the feature, or as a result of updating the install record for a non-supported
feature. In the case of physically modifying the feature, parts will be shipped
and removed or replaced parts may or may not be returned. In the case where
only records are being updated, no parts are sent.
The straight add or remove of a feature
typically does not involve any credit. Unless otherwise specified, a removed
feature remains the property of the customer.
System Configuration
All system units and expansion units have
locations for features including processors, main storage, power, expansion,
disks, tapes, CD-ROM, and IOPs. The configurator contains the rules and
performance considerations for placement of these features, and should be used
to ensure a valid configuration. The use of performance tools may also help in
optimizing a configuration to match a specific set of requirements.
Customer-Installable Features
On Model S10, IBM will begin to deliver
customer-installable features. This is in response to customer requests for
more flexibility in system and MES installability. Future systems will be
designed to further enable customer-installable features. On the Model S10,
DASD, PCI features, and external cables will be customer installable.
On MES orders where all features are customer
installable, the customer will install all features. On MES orders that contain
mix of customer engineer (CE) and customer-installable features, if you so
choose, the CE will install all features (including those designated as
customer installable). IBM installation of orders containing all
customer-installable features will be available via normal service contracts.
PCI Card Packaging
With Models S10 and S20, an industry-standard
form factor known as Peripheral Component Interconnect (PCI) is introduced. In
the future, it will allow AS/400 to choose from a wide range of devices that
can be integrated into the system. The introduction of PCI technology to AS/400
packaging promotes the integration of new technologies for AS/400 applications.
Processors
When ordering a system, one of the following
processors must be specified:
· Model S10
o #2118 Model S10 Processor (base)
(For IBM US, No Longer Available as of May 31, 1999)
- #2119 Model S10 Processor
- Model S20
- #2161 Model S20 Processor (base)
- #2163 Model S20 Processor
- #2165 Model S20 2-Way Processor
- #2166 Model S20 4-Way Processor
- #2170 Model S20 2-W ISV Processor
(For IBM US, No Longer Available as of May 31, 1999)
- #2177 Model S20 4-W ISV Processor
(For IBM US, No Longer Available as of May 31, 2000)
- #2178 Model S20 4-W ISV Processor
(For IBM US, No Longer Available as of May 31, 2000)
- Model S30
- #2257 Model S30 Processor (Base)
- #2258 Model S30 2-Way Processor
- #2259 Model S30 4-Way Processor
- #2260 Model S30 8-Way Processor
- #2320 Model S30 4-Way ISV Processor
- #2321 Model S30 8-Way ISV Processor
- #2322 Model S30 8-Way ISV Processor
- Model S40
- #2256 Model S40 8-Way Processor (Base)
- #2261 Model S40 12-Way Processor
- #2207 Model S40 8-Way Processor
- #2208 Model S40 12-Way Processor
- #2340 Model S40 8-Way ISV Processor
- #2341 Model S40 12-Way ISV Processor
Software Preload
(#5006) Backup Tape for Preloaded Software
(For IBM US, No Longer Available as of May 31,
2001)
Indicates that manufacturing will ship a
backup tape with a TSP initial order. A maximum of one (#5006) is supported.
The #55XX alternate IPL specify code designates the media to be used for the
backup tape. Only internal tapes and 7208 tapes are supported on the Model S10.
Requires #5000 also be on the order. This feature may have country specific
usage. Mutually exclusive with #0095, #0096, and #0400.
Main Storage
· Model S10
o #3182 32MB Main Storage
o #3110 64MB Main Storage
- Model S20
- #2830 Main Storage Expansion
Maximum: One on processors #2165, #2166, #2177, and #2178. None on #2161 and #2163.
- #3001 32MB Main Storage
- #3002 128MB Main Storage
- Model S30
The Model S30 has two base and eight feature main storage slots for processor features #2257, #2258, #2259, and #2320 and four base and eight feature main storage slots for the #2260, #2321, and #2322 processors.
Storage features for processors #2257, #2258, #2259, and #2320 must be added in pairs of equal capacity. Main storage features for processors #2260, #2321, and #2322 must be added in sets of four (each of the four must be the same capacity and feature number).
The following main storage features are available for use with processor features #2257, #2258, #2259 and #2320:
- #3179 256MB Main Storage
- #3180 512MB Main Storage
- #3189 128MB Main Storage
- #3190 256MB Main Storage
- #3191 512MB Main Storage
- #3192 1024MB Main Storage
- #3193 2048MB Main Storage
- #8180 Optional Base 512MB Main Storage
- #8191 Optional Base 512MB Main Storage
- #8192 Optional Base 1023MB Main Storage
- #8193 Optional Base 2048MB Main Storage
- #9190 Base 256MB Main Storage
- #9179 Base 256MB Main Storage
Main storage features for use with processor features #2260, #2321, and #2322:
- #3179 256MB Main Storage
- #3180 512MB Main Storage
- #3189 128MB Main Storage
- #3190 256MB Main Storage
- #3191 512MB Main Storage
- #3192 1024MB Main Storage
- #3193 2048MB Main Storage
- #8180 Optional Base 512MB Main Storage
- #8191 Optional Base 512MB Main Storage
- #8192 Optional Base 1024MB Main Storage
- #8193 Optional Base 2048MB Main Storage
- #9190 Base 256MB Main Storage
- #9179 Base 256MB Main Storage
- Model S40
The Model S40 has four base and sixteen feature main storage slots. Main storage features must be added four at a time (each of the four must be the same capacity and feature number).
The following main storage features are available:
- #3179 256MB Main Storage
- #3180 512MB Main Storage
- #3189 128MB Main Storage
- #3190 256MB Main Storage
- #3191 512MB Main Storage
- #3192 1024MB Main Storage
- #8180 Optional Base 512MB Main Storage
- #8191 Optional Base 512MB Main Storage
- #8192 Optional Base 1024MB Main Storage
- #9190 Base 256MB Main Storage
- #9179 Base 256MB Main Storage
Power
(#2730) Programmable Regulator
#2730 is required when five or more main
storage cards are installed in Model S30. Maximum: One.
(#5143) Feature Power Supply
(For IBM US, No Longer Available as of July 2,
2002)
#5143 is a 400-watt feature power supply that
is a prerequisite to the installation of a #5052. #5143 can be installed in
features #5072 or #5082.
#5143 can be installed in an expansion tower
even though a #5052 may not be installed. This is useful when upgrading from a
model that required #5143 in the system unit but that did not have a #5052
installed. If a #5143 is installed in this manner, a subsequent order for a
#5052 will not require a new #5143. #5143 is available as an MES feature only. Prerequisite:
#5072 or #5082 expansion unit. Maximum: One.
(#5150) Battery Backup (external)
(For IBM US, No Longer Available as of July 2,
2002)
#5150 is an external battery backup that when
used in conjunction with the internal battery backup is capable of extending
the continuously powered mainstore (CPM) time for all main storage sizes to at
least 48 hours. Models S30 and S40 come with an internal battery backup that is
capable of maintaining the CPM on 16GB of main storage for at least 24 hours.
#5150 is required when the main storage size exceeds 16GB on the Models S30 and
S40. #5150 can also be purchased for the purpose of increasing the CPM time
over that of the internal battery backup.
(#5151) Power Supply (650 Watts)
(For IBM US, No Longer Available as of July 2,
2002)
#5151 is a 650-watt feature power supply that
is a prerequisite to the installation of a #5055. #5151 is also required if
five or more main storage cards are installed. Maximum: One on Models S30.
(#5153) Redundant Power Supplies
(For IBM US, No Longer Available as of July 2,
2002)
#5153 consists of two power supplies (845 watt
and 650 watt). This feature provides redundancy for the power supplies in the
system unit and the expansion unit. This feature physically resides in the #5064
System Unit Expansion.
Prerequisite: #5064. Not available on Model
S20 processor #2161. Maximum: One.
Expansion Units
The design of the AS/400 allows for the
addition of buses, card slots, and disk unit slots through a set of expansion
features. On the Models S30 and S40 there is one new expansion tower, one new
storage tower, and three new storage units. These new features have advanced
function that takes advantage of Ultra SCSI disk units. The older towers (#5072
and #5082) will be supported but not orderable. The older storage unit (#5052)
must continue to be offered for attachment to the older towers.
(#2683) 266Mbps OptiConnect Receiver
(For IBM US, No Longer Available as of
December 28, 2001)
#2683 is an OptiConnect card used to attach a
RISC satellite system to a hub system over optic cable up to two kilometers
away. The hub system in the cluster can be either a RISC or IMPI system which
has #5601 or #5602 installed, dedicating an I/O tower or frame, into which
#2683 installs, for OptiConnect cluster use. The fiber optic cable operates at
266Mbps. #2683 is ordered via RPQ 843872. Models S20, S30, and S40.
(#2685) 1063Mbps OptiConnect Receiver
(For IBM US, No Longer Available as of
December 28, 2001)
#2685 is an OptiConnect card used to attach a
RISC satellite system to a hub system over optic cable up to 500 meters away.
The hub system in the cluster can be either a RISC or IMPI system which has
#5601 or #5602 installed, dedicating an I/O tower or frame, into which #2685
installs, for OptiConnect cluster use. The fiber optic cable operates at
1063Mbps. #2685 is ordered via RPQ 843873. Models S20, S30, and S40.
(#2686) Optical Link Processor (266Mbps)
(For IBM US, No Longer Available as of
December 28, 2001)
Attaches the System Unit Expansion Rack
(#5044). #2686 is also used in OptiConnected satellite systems to connect to
hub systems at distances greater than 500m (up to 2km).
Prerequisites: An optical link processor (OLP)
slot in the #9331 or #9329 expansion units on the Model S20, or in the #2695
Optical Bus Adapter, or system unit on Models S30 and S40. Each #5044 attached
to the #2686 requires two optical cables. Card slots required: None. Maximum:
Two.
(#2688) Optical Link Processor
#2688 is a feature for adding up to two
optical buses. #2688 can be used to attach up to two #5072s, #5073s, #5082s or
#5083s in any combination. The prerequisite for adding #2688 is #2695 or an
open IOA slot in the system unit's base optical bus adapter. I/O card slots
used: None. Maximum: Two on Model S20. Nine on Models S30 and S40.
Note: Three optical cables are required to attach two towers to a #2688. Each
#2688 shipped should include two optical cables for attaching the first tower.
The second tower shipped for a #2688 should include only one optical cable. The
second tower will be attached in a ring with the first tower and the #2688.
(#2695) Optical Bus Adapter
#2695 is a feature on Models S30 and S40 which
allows for the addition of up to three Optical Link Processors (#2686/#2688).
I/O card slots used: One. Maximum: Two.
(#5052) Storage Expansion Unit (Exp Unit)
(For IBM US, No Longer Available as of May 31,
2001)
#5052 provides space for up to sixteen disk
units and can be used on expansion tower features #5072 or #5082.
System unit storage expansion unit usage: The configurators will specify #5055 as the first
storage expansion units on Model S30 or #5057 as the first storage expansion
unit on Model S40. Not available on the Model S20. You may override the
configurator and specify #5052, #5058 or #5083 instead of #5055/#5057.
Expansion tower storage expansion unit
usage: The configurator will specify
either #5052 or #5058. When there is a choice, #5058 must be specified before
#5052.
The prerequisites for this feature are:
- One #5143 (supported but not orderable)
- One disk unit IOP
- #6532 (V4R1 Default) (support only)
- #6502, #6512, #6530 (supported but not
orderable)
- One tower (#5072 or #5082)
(#5055) Storage Expansion Unit
(For IBM US, No Longer Available as of May 31,
2001)
#5055 provides space for up to eight disk
units on the system unit of Model S30. Requires #9751 as a prerequisite.
System unit storage expansion unit usage: The configurators will specify #5055 as the first
storage expansion unit if eight or fewer disk units (not including the disk
units allowed in the system unit) are required. You may override the
configurator and specify #5052, #5058 or #5083 instead of #5055. If you exceed
the eight disk units allowed in the #5055 the configurator will specify #5052,
#5083 or #5058.
Expansion tower storage expansion unit
usage: The #5052 and #5058 are the
only storage expansion units allowed on the expansion towers. When there is a
choice, #5058 must be specified before #5052.
The prerequisites for this feature are:
- One #5151 (supported but not orderable)
- One disk unit IOP (#9751)
(#5057) Storage Expansion Unit
#5057 provides space for up to sixteen disk
units on the system unit of Model S40. Requires #9751 as a prerequisite. #5057
attaches to the Base I/O feature #9251.
System unit storage expansion unit usage: The configurator will specify #5057 as the first
storage expansion unit if 16 or less disk units (not including the disk units
allowed in the system unit) are required. The customer is allowed to override
the configurator and specify #5052, #5058 or #5083 instead of #5057. If you
exceed the 16 disk units allowed in the #5057 the configurator will specify
#5052, #5083 or #5058.
Expansion tower storage expansion unit
usage: The #5052 and #5058 are the
only storage expansion units allowed on the expansion towers. When there is a
choice, #5058 must be specified before #5052.
Prerequisite: One disk unit IOP (#9751).
(#5058) Storage Expansion Unit
(For IBM US, No Longer Available as of May 31,
2001)
#5058 provides space for up to sixteen disk
units when attached to the #5073 or #5083 expansion towers on Models S30 and
S40. The #5058 includes a battery backup unit that is placed into the tower.
#5058 is capable of controlling the new Ultra SCSI disk units.
System unit storage expansion unit usage: The configurator will specify #5055 as the first
storage expansion units on the Model S30, or #5057 as the first storage
expansion unit on Model S40. You may override the configurator and specify
#5052, #5058 or #5083 instead of #5055/#5057.
Expansion tower storage expansion unit
usage: The configurator will specify
either #5052 or #5058. When there is a choice, #5058 must be specified before
#5052.
The prerequisites for this feature are:
- One disk unit IOP
- #6532 (V4R1 Default) (support only)
- #6502, #6512, #6530 (supported but not
orderable)
- One tower (#5073 or #5083) (support only)
(#5064) System Unit Expansion
(For IBM US, No Longer Available as of
December 28, 2001)
This feature for the Model S20 supports the
addition of either an SPD or PCI card expansion unit (#9329 or #9331), a #7130
Expansion Unit Tape/Cage to support up to three additional tape units, a
standard DASD cage supporting up to five disk units, and up to two #7128 DASD
Expansion Units to support up to 15 total disk units. (See #7128 description
for number of DASD Expansion Units supported by processor).
Prerequisites: #9329 or #9331 (support only).
Maximums: One.
(#5065) Storage/PCI Expansion Tower
(For IBM US, No Longer Available as of
November 21, 2003)
Installed on AS/400e Models S20, S30, and S40
for adding disk units, PCI adapter cards, and up to two removable media units.
#5065 supports Ultra2 SCSI disk units.
#5065 includes a 1063Mbps optical bus card,
cables (including an optical cable) and the Storage/PCI Expansion Tower. The
Storage/PCI Expansion Tower includes:
- 12 PCI IOA slots
- Space for 45 disk units
- Space for two removable media devices
- One battery backup
- Redundant swap power supplies
- PCI LAN/WAN/Workstation IOP (#2824)
The 12 PCI IOA slots are in groups of four
slots. Each group of four slots is supported by a #2824 PCI/LAN/WAN/Workstation
IOP. In each group of four slots, two slots are low speed PCI slots, one slot
is a high-speed PCI slot and one slot is a high-speed PCI SCSI slot. One #2824
is included with the #5065; the second and third #2824s are optional.
The 45-disk unit positions are in groups of
15. Each group of 15 disk units is:
- Controlled by a PCI RAID Disk Unit Controller (#2748-support only)
- Further divided into three groups of five disk units, with each
group of five disk units supported on a separate Ultra2 SCSI (LVD-SCSI)
bus from a #2748.
A mounting kit for the first 15 disk units is
included in the #5065. A mounting kit for the next 30 disk units is optional;
order #5101, the 30-Disk Expansion Feature.
#5065 can have up to three #2748 PCI RAID Disk
Unit Controllers. They must be installed in the PCI SCSI card slots.
#5065 also supports up to two removable media
devices (internal tape or CD-ROM). These devices are supported by the base
#2748.
#2718 PCI Magnetic Media Controller and #2729
PCI Magnetic Media Controller may also be installed in the PCI SCSI card slots
to support external tape devices.
Prerequisites: Optical Link Processor (#2688)
and Optical Bus Adapter (#2695), or #2688 and an open IOA slot on the base
optical bus adapter for Models S30 and S40. Optical Link Processor (#2688) for
Model S20. OS/400 V4R4 with PTF MF22587, or Cumulative (cum) PTF package
C9229440, or later, is required. Maximums: 18 on Models S30 and S40. Four on
Model S20.
(#5066) 1.8M I/O Tower
(For IBM US, No Longer Available as of
November 21, 2003)
#5066 is used on Models S20, S30, and S40 for
adding up to 90 disk units, up to 24 PCI IOAs, and up to four removable media
units. #5066 supports Ultra and Ultra2 SCSI disk units. #5066 includes two
1063Mbps optical bus cards, various cables (including optical cables) and the
1.8m tower enclosure. The tower provides 24 PCI IOA slots, space for 90 disk
units, space for four removable media devices, battery backup,
redundant/hot-swap power supplies, and two PCI LAN/WAN/Workstation IOPs.
The 24 PCI IOA slots are in groups of four
slots, with each group slots supported by a #2824 PCI/LAN/WAN/Workstation IOP.
Two #2824s are included with #5066, the remaining four #2824s are features. In
each group of four slots, two slots are low-speed, one slot is high-speed, and
one is a high-speed or SCSI slot.
The 90 disk unit positions are in groups of
15, with each group requiring a #2748 Disk Unit Adapter. Up to six #2748 Disk
Unit Adapters are supported in the #5066, each installed in a SCSI card slot.
Each group of 15 disk units is further divided into three groups of five disk
units, with each group of five disk units supported on a separate Ultra2 SCSI (LVD-SCSI)
bus from the #2748.
The following disk features are supported in
this storage expansion tower:
- #4308 4.19GB Disk Unit
- #4314 8.58GB Disk Unit (support only)
- #4317 8.58GB 10k rpm Disk Unit
- #4318 17.54GB 10k rpm Disk Unit
- #4324 17.54GB Disk Unit (support only)
- #4331 1.6GB Read Cache Device (support only)
The #5066 also supports up to four removable
media devices (internal tape or CD-ROM). These removable media devices are
controlled by the first #2748. The #2718 PCI Magnetic Media Controller and the
#2729 PCI Magnetic Media Controller may also be installed in the PCI SCSI card
slots to support external tape devices.
#5065 (Storage/PCI Expansion Tower) is the
configurator default when a PCI IOP/IOA is ordered that requires a PCI
expansion unit. #5066 may be specified on the extra controllers screen. For
each #5066 ordered, a quantity of two #0565 (#5065 Equivalent) specify codes
will be added to the order. If a #5066 is to be shared between two systems, one
#0565 must be removed from the original ordering system and added to the
sharing system, using an RPO (Record Purpose Only) change.
For Model S20, one Optical Link Processor
(#2688) is required. Models S30 and S40 require the Optical Link Processor
(#2688) and Optical Bus Adapter (#2695), or #2688 and an IOA slot on the base
optical bus adapter. OS/400 V4R4, with PTF MF22587, or Cumulative (cum) PTF
package C9229440, or later, is required.
(#5073) 1063Mbps System Unit Expansion Tower
(For IBM US, No Longer Available as of
December 28, 2001)
#5073 is used on Models S20, S30, and S40 for
adding I/O cards and disk units (#5058 required when adding disk units). #5073
includes a 1063 Mbps optical bus card, various cables (including an optical
cable) and the I/O tower. The I/O tower includes 13 feature slots, space for
four removable media devices (#2624 or #6513 required as a prerequisite), one
battery backup, one 400-watt base power supply, two 500-watt power supplies,
two I/O regulators, and disk units using #5058.
The line cord supplied will be 220V only (no
specify code is required). The length and plug type will be specified using
#9080, #9082 and #9083.
Prerequisites: #2688 and #2695 or #2688 and an
open IOA slot on the base optical bus adapter.
#5073 will be specified by the configurator based
on I/O card requirements. #5073 and #5058 appears on the extra controllers
screen as an alternative to #5083.
Limitations:
- Power limitations. The +12V power must not exceed 60 watts in
#5073.
- High-workload IOP restrictions.
(#5083) 1063Mbps Storage Expansion Tower
(For IBM US, No Longer Available as of
December 28, 2001)
#5083 is used on Models S20, S30, and S40 for
adding up to 16 disk units (a total of 32 disk units are possible with the
addition of #5058). #5083 includes a 1063Mbps optical bus card, various cables
(including an optical cable) and the Storage Expansion Tower. The Storage
Expansion Tower includes two feature slots, space for 16 disk units, one
battery backup, one 400-watt base power supply, two 500-watt power supplies and
one regulator.
The line cord supplied will be 220V only (no
specify code is required). The length and plug type will be specified using
#9080, #9082 and #9083. The two feature slots must only be used for adding
internal disk unit IOPs.
#5083 will be specified by the configurator
when an installed storage expansion unit or tower cannot contain sufficient
DASD units, or when the addition of a storage expansion unit to an installed or
proposed tower is not possible.
The prerequisites for this feature are:
- One disk unit IOP
- #6532 (support only)
- #6502, #6512, #6530 (supported but not
orderable)
- #2688 and #2695 or #2688 and an open IOA slot on the base optical
bus adapter.
(#5101) 30-Disk Expansion Feature
A disk unit enclosure feature for the #5065
Storage/PCI Expansion Tower. #5101 includes two 15 disk unit enclosures, a
700-watt power supply, backplanes and cables. One #2748 PCI Disk Unit
Controller is required to support the 15 disk units in each of the two disk
unit enclosures included with #5101. This feature is not used with #5066, 1.8m
I/O Tower. OS/400 V4R4 with PTF MF22587, or Cumulative (cum) PTF package
C9229440, or later, is required.
Maximum: One per #5065.
(#7128) DASD Expansion Unit
This feature allows the addition of five disk
units to either the system unit on Models S10 and S20, or the #5064 System Unit
Expansion on the Model S20. It supports concurrent maintenance of these disk
units.
Maximums: Model S10: One in the base system
unit. Model S20: One with processor #2161, two with processors #2163, #2165,
and #2166. Two in the #5064 System Unit Expansion.
(#7130) Expansion Unit Tape/Cage
(For IBM US, No Longer Available as of July 2,
2002)
This feature allows the addition of three tape
units to the #5064/#9364 System Unit Expansion for Model S20. A tape controller
is required to support these tape devices.
Prerequisites: #9329/#9331 (support only)
Maximums: One.
(#9251) Base I/O Tower
(For IBM US, No Longer Available as of July 2,
2002)
#9251 included in the base Model S40.
#9251 includes four feature IOP slots, space
for three removable media devices, one CD-ROM drive, two battery backups, one
400-watt base power supply, two 500-watt power supplies, three I/O regulators,
one MFIOP, and one optical bus adapter. Feature #5057 can be added to increase
the number of disk units supported from four to 20.
(#9329) PCI Integrated Expansion Unit
(For IBM US, No Longer Available as of May 31,
2001)
This base feature allows the addition of up to
14 PCI adapter cards (11 PCI card slots and three high-speed PCI card slots)
driven by three PCI controllers and one integrated PC server, and up to two OLP
cards to support up to four external towers. A PCI controller is included the
#9329. Maximum: One.
(#9330) PCI Integrated Expansion Unit
This base feature enables you to add up to 14
PCI adapter cards driven by three PCI controllers and one integrated PC server,
and up to two OLP cards to support up to four external towers. A controller
(#2824) is included with the #9330.
This feature can only be ordered with #5064 or
#9364. Feature conversions are possible from #9329 or #9331 to #9330, but not
from #9330 to #9331 or #9329.
Prerequisites: System Unit Expansion
(#5064/#9364) and OS/400 V4R4 with PTF MF22587, or Cumulative (cum) PTF package
C9229440, or later. Maximum: One.
(#9331) Expansion Unit for SPD Cards
(For IBM US, No Longer Available as of
December 28, 2001)
Allows the addition of up six SPD cards, and
up to two OLP cards to support up to four external towers. An SPD controller
card is included to drive the OLP cards and the six SPD cards.
This feature must be ordered at the same time
as the #5064/#9364. A feature conversion is available from #9331 to #9329, but
not from #9329 to #9331. Prerequisites: #5064 or #9364 (Expansion Units).
Maximums: One.
Expansion Feature Conversions
· #2686 to #2688 Conversion
For conversion from 266Mbps to 1063Mbps Expansion Tower. This conversion is required when converting #5070 to #5072 (or #5071 to #5073, #5080 to #5082 and #5081 to #5083) during the upgrade of Models 50S to Models S20, S30, and S40.
Note: This conversion requires one optical cable.
- #5051 to #5052 Conversion
This conversion is used during an upgrade where a #5051 is installed and a #5052 is required.
- #5051 to #5058 Conversion
This conversion is used during an upgrade where a #5051 is installed and a #5058 is required.
- #5052 to #5058 Conversion
This conversion is used during an upgrade where a #5052 and #0090 are installed and a #5058 is required.
- #5060 to #5072 Conversion
Allows converting copper attached bus extension tower (#5060) to fiber optic attached system unit expansion tower (#5072). This conversion is necessary because the #5060 is not supported on the AS/400 RISC models.
- #5061 to #5082 Conversion
Allows converting Storage Expansion Tower (#5061) to 1063Mbps Storage Expansion Tower (#5082). This conversion is necessary when upgrading a model of the AS/400 with a #5061 to a new model of the AS/400. The conversion involves removing #2670 and replacing it with #2682.
- #5062 to #5072 Conversion
Allows converting system unit expansion tower (#5062) to fiber optic attached system unit expansion tower (#5072). This conversion is necessary when upgrading a model of the AS/400 with a #5062 to a new model of the AS/400. The conversion involves removing #2670 and replacing it with #2682.
- #5063 to #5072 Conversion
Allows converting copper attached system unit expansion tower (#5063) to fiber optic attached system unit expansion tower (#5072). This conversion is necessary when upgrading a Model 300 with a #5063 to a new model of the AS/400. The conversion involves removing #2690 and cable and replacing them with #2682 and the appropriate fiber optic cable.
- #5070 to #5072 Conversion
Allows customer to convert from 266Mbps to 1063Mbps Expansion Tower. This conversion is required when upgrading from Model 50S to Models S20, S30, and S40.
- #5071 to #5073 Conversion
Allows converting from 266Mbps to 1063Mbps Expansion Tower. This conversion is required when upgrading from Model 50S to Models S20, S30, and S40.
- #5080 to #5082 Conversion
Allows converting from 266Mbps to 1063Mbps Storage Expansion Tower. This conversion is required when upgrading from Model 50S to Models S20, S30, and S40.
- #5081 to #5083 Conversion
Allows converting from 266Mbps to 1063Mbps Storage Expansion Tower. This conversion is required when upgrading from Model 50S to Models S20, S30, and S40.
- #8052 to #5055 Conversion
Required during upgrades to Model S30 where an #8052 is installed.
- #8052 to #5057 Conversion
Required during upgrades to Model S40 where an #8052 is installed.
Disk Units
A 4.19GB disk unit is included in the base
system on all new orders, and IMPI to RISC upgrades. All AS/400e series models
support concurrent maintenance of internal disk features.
Ultra2 SCSI Disk Features
(#4317) 8.58GB 10k rpm Disk Unit
Optional
feature that provides 8.58GB of disk storage capacity with the additional
performance of 10,000 rpm. For use in the Storage/PCI Expansion (#5065)
feature.
Prerequisites: PCI RAID Disk Unit Controller
(#2748), Storage/PCI Expansion (#5065), and OS/400 V4R4 with PTF MF22587, or
Cumulative (cum) PTF package C9229440, or later.
(#4318) 17.54GB 10k rpm Disk Unit
Optional Ultra2 DASD feature that provides
17.54GB of disk storage capacity. For use in the Storage/PCI Expansion (#5065)
and 1.8m I/O Tower (#5066) features, on Models S20, S30, and S40.
Prerequisites: PCI RAID Disk Unit Controller
(#2748) and OS/400 V4R4, or later.
(#6718, #6818) 17.54GB 10k rpm Disk Unit
(For IBM US, #6718 No Longer Available as of
December 3, 2002)
(#8618, #8818) 17.54GB 10k rpm Disk Unit
(For IBM US, No Longer Available as of
December 28, 2001)
These disk units provide 17.54GB of disk
storage capacity with the additional performance of 10,000 rpm. OS/400 V4R4, or
later, is required.
- #6718 - Optional disk unit feature for Models S20, S30, and S40
- #6818 - Optional disk unit feature for Models S10 and S20
- #8618 - Optional base disk unit for Models S30 and S40. (support
only)
- #8818 - Optional base disk unit for Models S10 and S20 (support
only)
Ultra SCSI Disk Features
The following disk features are double-byte
Ultra SCSI disk units
(#1333) 2-Byte 8.53GB Disk Unit Kit
(For IBM US, No Longer Available as of October
31, 2000)
This feature provides the hardware for migrating
one 8.58GB disk unit from a previous AS/400 model. See Disk Unit Table -
Migration Features, for AS/400 features that require kits during an upgrade.
(#1334) 17.54GB Disk Unit Kit
(For IBM US, No Longer Available as of October
31, 2000)
Hardware for migrating one 17.54GB disk unit
from a previous AS/400 model.
(#1336) 2-Byte 1.96GB Disk Unit Kit
(For IBM US, No Longer Available as of October
31, 2000)
This feature provides the hardware for
migrating one 1.96GB disk unit from a previous AS/400 model. See Disk Unit
Table - Migration Features, for AS/400 features that require kits during an
upgrade.
(#1337) 2-Byte 4.19GB Disk Unit Kit
(For IBM US, No Longer Available as of October
31, 2000)
This feature provides the hardware for
migrating one 4.19GB disk unit from a previous AS/400 model. See Disk Unit
Table - Migration Features, for AS/400 features that require kits during an
upgrade.
(#4308) 4.19GB Disk Unit
Optional feature that provides 4.19GB of disk
storage capacity. For use in the Storage/PCI Expansion (#5065) feature.
Prerequisites: PCI RAID Disk Unit Controller
(#2748), Storage/PCI Expansion (#5065), and OS/400 V4R4 with PTF MF22587, or
Cumulative (cum) PTF package C9229440, or later.
(#4314) 8.58GB Disk Unit
(For IBM US, No Longer Available as of January
31, 2001)
Optional feature that provides 8.58GB of disk
storage capacity. For use in the Storage/PCI Expansion (#5065) feature.
Prerequisites: PCI RAID Disk Unit Controller
(#2748), Storage/PCI Expansion (#5065), and OS/400 V4R4 with PTF MF22587, or
Cumulative (cum) PTF package C9229440, or later.
(#4324) 17.54GB Disk Unit
(For IBM US, No Longer Available as of January
31, 2001)
Optional Ultra DASD feature that provides
17.54GB of disk storage capacity. For use in the Storage/PCI Expansion (#5065)
and 1.8m I/O Tower (#5066) features, on Models S20, S30, and S40.
Prerequisites: PCI RAID Disk Unit Controller
(#2748) and OS/400 V4R4, or later.
(#6713, #7713, #8713) 8.58GB Disk Unit
(For IBM US, #6713 & #8713 No Longer
Available as of January 31, 2001)
(For IBM US, #7713 No Longer Available as of
October 30, 1998)
These features provide 8.58GB of disk capacity
for AS/400. Requires an Ultra SCSI storage slot for best performance.
- #6713 8.58GB Disk Unit
- #7713 Opt Base 8.58GB Disk Unit (support only)
- #8713 Opt Base 8.58GB Disk Unit
- Available for new orders and IMPI to RISC
upgrades.
(#6714, #8714) 17.54GB Disk Unit
(For IBM US, No Longer Available as of January
31, 2001)
These features provide 17.54GB of disk
capacity for AS/400. Requires an Ultra SCSI storage slot for best performance.
#6714 is the optional feature disk unit for Models S20, S30, and S40. #8714 is
the optional base 17.54GB disk unit for Models S30 and S40. OS/400 V4R2, or
later, is required.
(#6717, #6817) 8.58GB 10k rpm Disk Unit
(#8617, #8817) 8.58GB 10k rpm Disk Unit
(For IBM US, No Longer Available as of
December 28, 2001)
These disk units provide 8.58GB of disk
storage capacity with the additional performance of 10,000 rpm. OS/400 V4R3, or
later, is required.
- #6717 - Optional disk unit feature for Models S20 S30, and S40
- #6817 - Optional disk unit feature for Models S10 and S20
- #8617 - Optional base disk unit for Models S30 and S40 (support
only)
- #8817 - Optional base disk unit for Models S10 and S20 (support only)
(#6806) 1.96GB Disk Unit
This feature provides 1.967GB of disk capacity
(#6807) 4.19GB Disk Unit
(For IBM US, No Longer Available as of May 31,
2001)
(#9707) 4.19GB Disk Unit
(For IBM US, No Longer Available as of
December 29, 2000)
This feature provides 4.194GB of disk
capacity.
- #6807 Additional disk unit (support only)
- #9707 Base disk unit (support only)
(#6813, #8813) 8.58GB Disk Unit
(For IBM US, No Longer Available as of January
31, 2001)
This feature provides 8.589GB of disk
capacity.
- #6813 Additional disk unit (support only)
- #8813 Optional base disk unit (support only)
(#6824, #8824) 17.54GB Disk Unit
(For IBM US, No Longer Available as of January
31, 2001)
These features provide 17.54GB of disk
capacity. #6824 is the optional feature disk unit. #8824 is the optional base
17.54GB disk unit. OS/400 V4R2, or later, is required. Models: S10 and S20.
(#6906) 1.96GB Disk Unit
#6906 provides 1.96GB of disk capacity for
AS/400. Requires an Ultra SCSI storage slot for best performance.
(#6907, #9907) 4.19GB Disk Unit
(For IBM US, No Longer Available as of
December 29, 2000)
#6907 and #9907 provide 4.19GB of disk
capacity for AS/400. Requires an Ultra SCSI storage slot for best performance.
- #6907 Additional disk unit for both MES or Plant install (support
only)
- #9907 Base disk unit (support only)
- Available for new orders and IMPI to RISC
upgrades.
Fast Wide SCSI Disk Features
The following disk features are double-byte
disk units
(#1322) 2-Byte 1.03GB Disk Unit Kit
(For IBM US, No Longer Available as of October
31, 2000)
This feature provides the hardware for
migrating one 1.03GB disk unit from a previous AS/400. See Disk Unit Table -
Migration Features, for AS/400 features that require kits during an upgrade.
(#1323) 2-Byte 1.96GB Disk Unit Kit
(For IBM US, No Longer Available as of October
31, 2000)
This feature provides the hardware for
migrating one 1.96GB disk unit from a previous AS/400 model. See Disk Unit
Table - Migration Features, for AS/400 features that require kits during an
upgrade.
(#1325) 2-Byte 1.03GB Disk Unit Kit
(For IBM US, No Longer Available as of October
31, 2000)
This feature provides the hardware for
migrating one 1.03GB disk unit from a previous AS/400 model. See Disk Unit
Table - Migration Features, for AS/400 features that require kits during an
upgrade.
(#1326) 2-Byte 1.96GB Disk Unit Kit
(For IBM US, No Longer Available as of October
31, 2000)
This feature provides the hardware for
migrating one 1.96GB disk unit from a previous AS/400 model. See Disk Unit
Table - Migration Features, for AS/400 features that require kits during an
upgrade.
(#1327) 2-Byte 4.19GB Disk Unit Kit
(For IBM US, No Longer Available as of October
31, 2000)
This feature provides the hardware for
migrating one 4.19GB disk unit from a previous AS/400 model. See Disk Unit
Table - Migration Features, for AS/400 features that require kits during an
upgrade.
(#6605) 1.03GB Disk Unit/A
This feature provides 1.03GB of disk capacity
for AS/400 Advanced Series and e-series models. This feature is supported, but
cannot be ordered.
(#6606, #9606) 1.96GB Disk Unit/A
(For IBM US, No Longer Available as of March
31, 1999)
This feature provides 1.96GB of disk capacity
for AS/400 Advanced Series and e-series models. This feature is supported, but
cannot be ordered.
- #6606 1.96GB Disk Unit/A (support only-replaced by #6906)
- #9606 Base Disk Unit (1.96GB) (support only)
(#6607, #7607) 4.19GB Disk Unit/A
(For IBM US, #6607 No Longer Available as of
December 29, 2000)
(For IBM US, #7607 No Longer Available as of
October 30, 1998)
This feature provides 4.19GB of disk capacity
for AS/400 Advanced Series and e-series models. This feature is supported, but
cannot be ordered.
- #6607 4.19GB Disk Unit/A (support only-replaced by #6907)
- #7607 Optional Disk Unit (4.19GB) (support only)
(#6650) Additional Disk Unit (1.96GB)
This feature provides 1.96GB of additional
storage capacity. This feature is supported, but cannot be ordered.
(#6652) Additional Disk Unit (1.03GB)
This feature provides 1.03GB of additional
storage capacity. This feature is supported, but cannot be ordered.
Fast Narrow SCSI Disk Features
The following disk features are single-byte
disk units
(#1312) 1-Byte 1.03GB Disk Unit Kit
(For IBM US, No Longer Available as of October
31, 2000)
This feature provides the hardware for
migrating one 1.03GB disk unit from a previous AS/400 model. See Disk Unit
Table - Migration Features, for AS/400 features that require kits during an
upgrade.
(#1313) 1-Byte 1.96GB Disk Unit Kit
(For IBM US, No Longer Available as of October
31, 2000)
This feature provides the hardware for
migrating one 1.96GB disk unit from a previous AS/400 model. See Disk Unit
Table - Migration Features, for AS/400 features that require kits during an
upgrade.
(#1602) Single Disk Unit Kit (1.03GB)
(For IBM US, No Longer Available as of March
31, 1999)
This feature provides the hardware for
migrating one 1.03GB disk unit from a previous model of the AS/400. See Disk
Unit Table - Migration Features, for AS/400 features that require kits during
an upgrade.
(#1603) Single Disk Unit Kit (1.96GB)
This feature provides the hardware for
migrating one 1.96GB disk unit from a previous model of the AS/400. See Disk
Unit Table - Migration Features, for AS/400 features that require kits during
an upgrade.
Disk Unit Table - Migration Features
|-------------------------------|| From feature... |
|-------------------------------------|-------------------------------|
|Feature| Size |Byte|SCSI |Mirror|RAID| One kit | Two kits |
|Kit | | |Type | (1) |(2) | required if: | required if: |
|-------|------|----|---- |------|----|---------------|---------------|
|1312 |1.03GB| 1 |Fast | 5 | B |1203 1602(3) |2802 6612 |
| | | | | | |6601 6602 |6812 8612 |
| | | | | | |6701 6802 |9802 |
| | | | | | |9601 9602 |9802 |
|-------|------|----|-----|------|----|---------------|---------------|
|1313 |1.96GB| 1 |Fast | 4 | A |1204 1603(3) |6613 7613 |
| | | | | | |6603 |8613 |
|-------|------|----|-----|------|----|---------------|---------------|
|1322 |1.03GB| 2 |Fast | 5 | B |1211 1213 | |
| | | | | | |4211 4652(4) | |
| | | | | | |6652(3) 9652 | |
|-------|------|----|-----|------|----|---------------|---------------|
|1323 |1.96GB| 2 |Fast | 4 | A |1212 1214 | |
| | | | | | |4212 4650(6) | |
| | | | | | |6650(3) 8650 | |
|-------|------|----|-----|------|----|---------------|---------------|
|1325 |1.03GB| 2 |Fast | 5 | B |1205 4205 | |
| | | | | | |4605(4) 6605(3)| |
| | | | | | |9605 9705 | |
|-------|------|----|-----|------|----|---------------|---------------|
|1326 |1.96GB| 2 |Fast | 4 | A |1206 4206 | |
| | | | | | |4606(4) 6606(3)| |
| | | | | | |8606 8706 9606 | |
|-------|------|----|-----|------|----|---------------|---------------|
|1327 |4.19GB| 2 |Fast | 6 | C |1207 4207 | |
| | | | | | |4607(4) 6607(3)| |
| | | | | | |7607 8607 | |
| | | | | | |8707 | |
|-------|------|----|-----|------|----|---------------|---------------|
|1333 |8.58GB| 2 |Ultra| 7 | D |6713(3) 7713 | |
| | | | | | |8713 | |
|-------|------|----|-----|------|----|---------------|---------------|
|1334 |17.5GB| 2 |Ultra| 8 | E |6714(3) | |
|-------|------|----|-----|------|----|---------------|---------------|
|1336 |1.96GB| 2 |Ultra| 4 | A |6906(3) | |
|-------|------|----|-----|------|----|---------------|---------------|
|1337 |4.19GB| 2 |Ultra| 6 | C |6607(3) 7607(3)| |
| | | | | | |6907(4) | |
|-------|------|----|-----|------|----|---------------|---------------|
|1602 |1.03GB| 1 |Fast | 5 | B |6602, 6802, |2802, 6612, |
| | | | | | |9602, 1312 |6812, 8612, |
| | | | | | | |9802 |
|-------|------|----|-----|------|----|---------------|---------------|
|1603 |1.96GB| 1 |Fast | 4 | A |6603, 1313 |6613, 7613, |
| | | | | | | |8613 |
|---------------------------------------------------------------------|
Notes: (1) Disk unit features with the same "NUMBER" in this column
can be mirrored to each other. (2) Disk unit features with the same "LETTER" in this column can be put into the same RAID array. (3) This file can be used without a kit if placed in an I/Otower instead of the system unit or #5064.
(4) This file can be used without a kit by record purpose only (RPO) conversion and placement in an I/O tower instead of the system unit or #5064.Disk Unit Table -- Features Supported
|------------------------------------------------------|
| Feature | Size |Byte| SCSI |RPM |IOPs|Mirror| RAID || | | | Type | | | (1) | (2) |
|-----------|------|----|------|----|----|------|------|
| 4308 |4.19GB| 2 |Ultra |7.2k|2748| 6 | F |
|-----------|------|----|------|----| |------|------|| 4314 |8.58GB| 2 |Ultra |7.2k| | 7 | G |
|-----------|------|----|------|----| |------|------|| 4317 |8.58GB| 2 |Ultra2| 10k| | 7 | G |
|-----------|------|----|------|----| |------|------|| 4318 |17.5GB| 2 |Ultra2| 10k| | 8 | H |
|-----------|------|----|------|----| |------|------|| 4324 |17.5GB| 2 |Ultra |7.2k| | 8 | H |
|-----------|------|----|------|----| |------|------|| 4331 | 1.6GB| 2 |Ultra2| N/A| | N/A | N/A |
|-----------|------|----|------|----|----|------|------|
| 6605 |1.03GB| 2 | Fast |7.2k|6502| 5 | B |
|-----------|------|----|------|----|6512|------|------|
| 6606,9606 |1.96GB| 2 | Fast |7.2k|6530| 4 | A |
|-----------|------|----|------|----|6532|------|------|
| 6607,7607 |4.19GB| 2 | Fast |7.2k|6533| 6 | C |
|-----------|------|----|------|----|9751|------|------|
| 6650 |1.96GB| 2 | Fast |7.2k|9754| 4 | A |
|-----------|------|----|------|----| |------|------|| 6652 |1.03GB| 2 | Fast |7.2k| | 5 | B |
|-----------|------|----|------|----| |------|------|| 6713,7713,|8.58GB| 2 | Ultra|7.2k| | 7 | D |
| 8713 | | | | | | | |
|-----------|------|----|------|----| |------|------|| 6714 8714 |17.5GB| 2 | Ultra|7.2k| | 8 | E |
|-----------|------|----|------|----|----|------|------|
| 6717/8617 |8.58GB| 2 | Ultra| 10k|6532| 7 | D |
| | | | | |6533| | |
| | | | | |9751| | |
| | | | | |9754| | |
|-----------|------|----|------|----| |------|------|| 6718/8618 |17.5GB| 2 | Ultra| 10k| | 8 | E |
|-----------|------|----|------|----|----|------|------|
| 6806 |1.96GB| 2 | Ultra|7.2k|2726| 4 | A |
|-----------|------|----|------|----|2740|------|------|
| 6807 9707 |4.19GB| 2 | Ultra|7.2k|2741| 6 | C |
|-----------|------|----|------|----|2748|------|------|
| 6813 8813 |8.58GB| 2 | Ultra|7.2k|6532| 7 | D |
|-----------|------|----|------|----|6533|------|------|
| 6817,8817 |8.58GB| 2 | Ultra|10k | | 7 | D |
|-----------|------|----|------|----| |------|------|| 6818,8818 |17.5GB| 2 |Ultra2|10k | | 8 | E |
|-----------|------|----|------|----| |------|------|| 6824 8824 |17.5GB| 2 | Ultra|7.2k| | 8 | E |
|-----------|------|----|------|----|----|------|------|
| 6906 |1.96GB| 2 | Ultra|7.2k|6502| 4 | A |
|-----------|------|----|------|----|6512|------|------|
| 6907,9907 |4.19GB| 2 | Ultra|7.2k|6530| 6 | C |
| | | | | |6532| | |
| | | | | |6533| | |
| | | | | |9751| | |
| | | | | |9754| | |
| | | | | | | | |
|------------------------------------------------------|
Notes: (1) Disk unit features with the same number in this column can
be mirrored to each other. (2) Disk unit features with the same letter in this column can be put into the same RAID array.Storage Expansion Units/Towers Support for Internal Disk Units
System Storage Expansion Units and Towers
Feature Unit5052 5055 5057 5058 5064/ 5065 5066 5082 5083
9364 (3) (3)
------- --- ---- ---- ---- ---- ----- ---- ---- ---- ----
1312 X X
1313 X X
1322 X X
1323 X X
1325 X X
1326 X X
1327 X X
1333 X X
1334 X X
1336 X X
1337 X X
1602 X X X X
1603 X X X X
4308 X X
4314 X X
4317 X X
4318 X X
4324 X X
4331 X X
6605 X X X X X X X
6606 X X X X X X X
6607 X X X X X X X
6650 X X X X X X X
6652 X X X X X X X
6713 X(1) X(2) X(1) X(1) X(1) X(2) X(2)
6714 X(1) X(2) X(1) X(1) X(1) X(2) X(2)
6717 X(1) X(2) X(1) X(1) X(1) X(2) X(2)
6718 X(1) X(2) X(1) X(1) X(1) X(2) X(2)
6806 X X
6807 X X
6813 X X
6817 X X
6818 X X
6824 X X
6831 X X
6906 X(1) X(2) X(1) X(1) X(1) X(2) X(1)
6907 X(1) X(2) X(1) X(1) X(1) X(2) X(1)
7607 X X X X X X X
7713 X(1) X(2) X(1) X(1) X(1) X(2) X(1)
8617 X(1) X(2) X(1) X(1) X(1) X(2) X(1)
8618 X(1) X(2) X(1) X(1) X(1) X(2) X(1)
8713 X(1) X(2) X(1) X(1) X(1) X(2) X(1)
8714 X(1) X(2) X(1) X(1) X(1) X(2) X(1)
8813 X X
8817 X X
8818 X X
8824 X X
9606 X X X X X X X
9707 X X
9907 X(1) X(2) X(1) X(1) X(1) X(2) X(1)
Notes: (1) For best performance use with an Ultra-SCSI disk unit controller (2) No Ultra-SCSI when attached to this storage expansion unit (3) #5065 and #5066 are the only storage expansion unit/towers that support SCSI Ultra2Internal Tape Units
The system and expansion towers accommodate
internal 1/4-inch tape, 8mm tape, and CD-ROM. All devices are controlled by the
system MFIOP, the Storage Device Controller (#2624), or the Internal Tape
Device Controller (#6513). One CD-ROM is in the base of each model. Concurrent
maintenance of tape and CD-ROM is supported on system units, expansion units,
and expansion towers on all SXX models except the Model S10.
The maximum quantity of internal tape devices
are as follows: 17 on the Models S30 and S40, and one on the Model S10. One
CD-ROM is required per model.
Internal Tape and CD-ROM Features
CD-ROM Features
(#4425) CD-ROM
(For IBM US, No Longer Available as of
November 21, 2003)
#4425 mounts in the #5065 Storage/PCI
Expansion Tower and is used for Alternate IPL (LPAR only) and program
distribution.
Prerequisites: PCI RAID Disk Unit Controller
(#2748) One removable media slot. OS/400 V4R4 with PTF MF22587, or Cumulative
(cum) PTF package C9229440, or later, is required. Maximum: 17.
(#6325) CD-ROM
Mounted in the system unit, or #5072/#5073
System Unit Expansion Tower, the #6325 is used for Alternate IPL (IBM
distributed CD-ROM media only) and program distribution.
Prerequisites: #2624 Storage Device
Controller. Requires OS/400 V4R4, or later.
(#6425) CD-ROM
(For IBM US, No Longer Available as of July 2,
2002)
Mounted in the system unit or System Unit
Expansion (#5064/#9364) w/#9329 in the Model 720, #6425 is used for alternate
IPL (IBM distributed CD-ROM media only) and program distribution. (Not
supported with #9331.)
Prerequisites: Disk controller #2726, #2740,
#2741, or #9728. Requires OS/400 V4R4, or later. Maximum: Four.
Internal Tape Features
(#1349) 1.2GB 1/4-Inch Tape Kit
(For IBM US, No Longer Available as of October
31, 2000)
#1349 is a 1.2GB tape kit available during an
upgrade from previous AS/400 model.
(#1350) 2.5GB 1/4-Inch Tape Kit
(For IBM US, No Longer Available as of October
31, 2000)
#1350 is a 2.5GB tape kit available during an
upgrade from a previous AS/400 model.
(#1355) 13.0GB 1/4-Inch Tape Kit
(For IBM US, No Longer Available as of October
31, 2000)
#1355 is a 13GB tape kit available during an
upgrade from a previous AS/400 model.
(#1360) 7.0GB 8mm Cartridge Tape Kit
(For IBM US, No Longer Available as of October
31, 2000)
#1360 is a 7GB 8MM cartridge tape kit
available during an upgrade from a previous AS/400 model.
(#1379) 1.2GB 1/4-Inch Tape Kit
(For IBM US, No Longer Available as of March
31, 1999)
This feature provides the hardware for migrating
one 1.2GB tape unit from a previous model of the AS/400.
(#1380) 2.5GB 1/4-Inch Tape Kit
(For IBM US, No Longer Available as of March
31, 1999)
This feature provides the hardware for
migrating one 2.5GB tape unit from a previous model of the AS/400.
Notes on tape migration:
Hardware data compression was supported on the
MFIOP on previous models of the AS/400. Models S10 and S20 do not support
hardware data compression as new tape devices all support compression or
compaction internal to the device. Software data compression can still be used
and is compatible with tapes written on prior systems with hardware data
compression. Some degradation in system and tape performance may occur when
using software data compression compared to a system with hardware data
compression. Replacing the 1.2GB 1/4-Inch Tape with a new #6481 2.5GB 1/4-Inch
tape (which supports 5.0GB typical capacity with device compaction) should be
considered. Alternatively a new #6585 13.0GB 1/4-Inch tape (which supports 26GB
typical capacity with device compaction) should be considered.
Migration kits contains different parts when
ordered for a Model S20 that supports tape concurrent maintenance, than when
ordered for a Model S10 that does not support tape concurrent maintenance.
See Tape Unit Table -- Migration Kits for
information on which features require a migration kit.
(#4482) 4GB 1/4-Inch Cartridge Tape
An internal tape drive with native performance
of 380KB/sec and capacity of 4GB, and up to 760KB/sec with capacity of 8GB using
data compression. The 4GB 1/4-Inch Cartridge Tape unit does not read or write
System/36 QIC-24 format.
The 4GB QIC drive mounts only in the
Storage/PCI Expansion Tower (#5065), and is intended for data interchange.
Alternate IPL is supported.
Prerequisites: Storage/PCI Expansion Tower
(#5065) and PCI RAID Disk Unit Controller (#2748). OS/400 V4R4 with PTF
MF22587, or Cumulative (cum) PTF package C9229440, or later, is required.
(#4483, #6383, #6483) 16GB 1/4-Inch Cartridge Tape
(For IBM US, No Longer Available as of
December 3, 2002)
At a data rate of 1.5MB/sec and capacity of
16GB per cartridge, (up to 3MB/sec and 32GB per cartridge with data
compaction), the 16GB 1/4-Inch Cartridge Tape unit provides a growth path for
the large number of AS/400s that use QIC tape for save/restore. It also may be
used for alternate IPL, program distribution, migration, and 1/4-inch cartridge
tape exchange.
· Will read/write:
o 16GB (up to 32GB with compression in QIC5010 format) with IBM MLR1-16GB Data Cartridge (59H4175)
o 13GB (up to 26GB with compression in QIC5010 format) with IBM DC5010 Data Cartridge (16G8574)
- Will read:
- 8GB (QIC4DC compressed format) with SLR5-4GB
Data Cartridge (59H3660)
- 5GB (QIC2DC compressed format) with IBM DC9250
Data Cartridge (16G8436)
- 4GB (QIC4GB format) with SLR5-4GB Data
Cartridge (59H3660)
- 2.5GB (QIC2GB format) with IBM DC9250 Data
Cartridge (16G8436)
#4483 - Mounts in the #5065 Storage/PCI
Expansion Tower on Models S20, S30, and S40. Prerequisites: PCI RAID Disk Unit
Controller (#2748) and OS/400 V4R4 with PTF MF22587, or Cumulative (cum) PTF
package C9229440, or later.
#6383 - Mounts in the system unit on Models
S30 and S40, and is controlled by the MFIOP. Also mounts in the #5072/#5073
expansion towers on Models S20, S30, and S40, and is controlled by the #6513
Internal Tape Device Controller. Requires OS/400 V4R1, or later.
#6483 - Mounts in Model S10 and S20 system
units, or in the #5064/#9364 expansion units on Model S20. This tape unit
includes different mounting parts when ordered for a Model S10, or an S20.
Requires tape IOP #2726, #2740, #2741, #2748, #6513, or #9728. OS/400 V4R1, or
later, is required.
(#4486) 25GB 1/4-Inch Cartridge Tape Unit
(For IBM US, No Longer Available as of
December 3, 2002)
Mounts in the #5065 Storage/PCI Expansion
Tower and may be used for save/restore, alternate IPL, program distribution,
migration, and 1/4-inch cartridge tape exchange. The #4486 is controlled by
first #2748 PCI Disk Unit Controller in the #5065. Native performance is 2MB/sec
with 25GB capacity, and up to 4MB/sec with 50GB of capacity using data
compression.
· #4486 will read/write:
o 25GB (up to 50GB with compression in MLR3 format) with IBM MLR3-25GB Data Cartridge (59H4128)
o 16GB (up to 32GB with compression in QIC5010 format) with IBM MLR1-16GB Data Cartridge (59H4175)
o 13GB (up to 26GB with compression in QIC5010 format) with IBM DC5010 Data Cartridge (16G8574)
- #4486 will read:
- 8GB (QIC4DC compressed format) with SLR5-4GB
Data Cartridge (59H3660)
- 5GB (QIC2DC compressed format) with IBM DC9250
Data Cartridge (16G8436)
- 4GB (QIC4GB format) with SLR5-4GB Data
Cartridge (59H3660)
- 2.5GB (QIC2GB format) with IBM DC9250 Data
Cartridge (16G8436)
Prerequisites: PCI RAID Disk Unit Controller
(#2748). OS/400 V4R4 with PTF MF22587, or Cumulative (cum) PTF package
C9229440, or later.
(#4684) 30GB 1/4-Inch Cartridge Tape
Mounted in a removable media device slot of a
system unit or an expansion tower, these features may be used for save/restore,
alternate IPL, program distribution, migration and 1/4-inch cartridge tape
exchange.
Cartridge Capacity (Native) = 30.0GB (1500-ft tape)
Cartridge Capacity (Compression) = 60.0GB (1500-ft tape)
Data Rate (Native) = 4.0MB/s
Data Rate (Compression) = 8.0MB/s
Prerequisites: Removable media device slot and
disk unit controller in the system unit or expansion tower in which the device
is mounted.
(#6380) 2.5GB 1/4-Inch Cartridge Tape Unit
(For IBM US, No Longer Available as of June
30, 2000)
Optional 2.5GB 1/4-Inch Cartridge Tape Unit
can be mounted in the system unit or expansion towers (#5072/#5073). It may be
used for save/restore, alternate IPL, program distribution, migration, and
1/4-inch cartridge tape exchange. This feature is supported only, and cannot be
ordered.
(#6381) 2.5GB 1/4-Inch Cartridge Tape Unit
(For IBM US, No Longer Available as of
December 29, 2000)
Optional 2.5GB 1/4-Inch Cartridge Tape Unit
may be used for save/restore, alternate IPL, program distribution, migration,
and 1/4-inch cartridge tape exchange.
(#6382) 4GB 1/4-Inch Cartridge Tape
(For IBM US, No Longer Available as of
December 3, 2002)
#6382 is an internal tape drive that extends
the performance and capacity of QIC (Quarter Inch Cartridge) technology.
Previous investment in QIC technology is protected by the capability to read
and write all previous AS/400 QIC formats back to QIC-120. The 4GB 1/4-Inch
Cartridge Tape unit does not read or write System/36 QIC-24 format.
Native media capacity is 4GB, and 8GB
(typical) with data compression. Native performance is 380KB/sec, and 760KB/sec
(typical) with data compression.
The 4GB QIC drive is intended for unattended
save/restore for low-end systems, data interchange, and software distribution.
Alternate IPL is supported.
Feature #6382 attaches to Models S20, S30, and
S40, via the MFIOP, or #6513 (Internal Tape Device Controller). OS/400 V4R1, or
later is required.
(#6385) 13GB 1/4-Inch Cartridge Tape Unit
(For IBM US, No Longer Available as of May 31,
2000)
Optional 13.0GB 1/4-Inch Cartridge Tape Unit
may be used for save/restore, alternate IPL, program distribution, migration,
and 1/4-inch cartridge tape exchange. 16GB tape media is supported. With the
IBM MLR1-16GB Data Cartridge (59H4175), the tape unit (#6385/#6485) will read
and write up to 16GB (non-compressed) in QIC5010 format.
Prerequisites: OS/400 V4R1, or later, with
PTFs.
(#6386) 25GB 1/4-Inch Cartridge Tape Unit
(For IBM US, No Longer Available as of
December 3, 2002)
Mount in the system unit or expansion towers
(#5072/#5073) for save/restore, alternate IPL, program distribution, migration,
and 1/4-inch cartridge tape exchange. Native performance is 2MB/sec and up to
4MB/sec with data compression. One #6386 can be controlled by the MFIOP.
Additional #6386s must be controlled by the #6513.
· #6386 will read/write:
o 25GB (up to 50GB with compression in MLR3 format) with IBM MLR3-25GB Data Cartridge (59H4128)
o 16GB (up to 32GB with compression in QIC5010 format) with IBM MLR1-16GB Data Cartridge (59H4175)
o 13GB (up to 26GB with compression in QIC5010 format) with IBM DC5010 Data Cartridge (16G8574)
- #6386 will read:
- 8GB (QIC4DC compressed format) with SLR5-4GB
Data Cartridge (59H3660)
- 5GB (QIC2DC compressed format) with IBM DC9250
Data Cartridge (16G8436)
- 4GB (QIC4GB format) with SLR5-4GB Data
Cartridge (59H3660)
- 2.5GB (QIC2GB format) with IBM DC9250 Data
Cartridge (16G8436)
(#6390) 7GB 8mm Cartridge Tape Unit
Optional 7GB 8mm Cartridge Tape Unit may be
used for save/restore, alternate IPL, program distribution, migration, and 8mm
cartridge tape exchange.
(#6480) 2.5GB 1/4-Inch Cartridge Tape
(For IBM US, No Longer Available as of July 2,
2002)
Mounts in the system unit, or the #5064 System
Unit Expansion on the Model S20. Feature #6480 is used for save/restore,
alternate IPL, program distribution, migration,and 1/4-Inch cartridge tape
exchange. If HDC is not required, or if software data compression will be used,
the MFIOP can be used to control this tape unit.
(#6481) 2.5GB 1/4-Inch Cartridge Tape
(For IBM US, No Longer Available as of
December 29, 2000)
Optional 2.5GB 1/4-Inch Cartridge Tape Unit
can be mounted in the system unit or #5064 System Unit Expansion. It may be
used for save/restore, alternate IPL, program distribution, migration and
1/4-Inch Cartridge tape exchange.
(#6482) 4GB 1/4-Inch Cartridge Tape
(For IBM US, No Longer Available as of
December 3, 2002)
#6482 is an internal tape drive that extends
the performance and capacity of QIC (Quarter Inch Cartridge) technology.
Previous investment in QIC technology is protected by the capability to read
and write all previous AS/400 QIC formats back to QIC-120. The 4GB 1/4-Inch
Cartridge Tape unit does not read or write System/36 QIC-24 format.
Native media capacity is 4GB, and 8GB
(typical) with data compression. Native performance is 380KB/sec, and 760KB/sec
(typical) with data compression.
The 4GB QIC drive is intended for unattended
save/restore for low-end systems, data interchange, and software distribution.
Alternate IPL is supported.
Feature #6482 attaches to Models S10 and S20.
OS/400 V4R1, or later is required.
(#6485) 13.0GB 1/4-Inch Cartridge Tape
(For IBM US, No Longer Available as of May 31,
2000)
Optional 13.0GB 1/4-Inch Cartridge Tape Unit
can be mounted in the system unit or #5064 System Unit Expansion. It may be
used for save/restore, alternate IPL, program distribution, migration and
1/4-Inch Cartridge tape exchange. 16GB tape media is supported. With the IBM
MLR1-16GB Data Cartridge (59H4175), the tape unit (#6385/#6485) will read and
write up to 16GB (non-compressed) in QIC5010 format.
Prerequisites: OS/400 V4R1, or later, with
PTFs.
(#6486) 25GB 1/4-Inch Cartridge Tape
(For IBM US, No Longer Available as of
December 3, 2002)
Mounts in the system unit of Models S10 or
S20, or in the #5064 System Unit Expansion on the Model S20. It is used for
save/restore, alternate IPL, program distribution, migration, and 1/4-inch
cartridge tape exchange. Native performance is 2MB/sec and up to 4MB/sec with
data compression.
· #6486 will read/write:
o 25GB (up to 50GB with compression in MLR3 format) with IBM MLR3-25GB Data Cartridge (59H4128)
o 16GB (up to 32GB with compression in QIC5010 format) with IBM MLR1-16GB Data Cartridge (59H4175)
o 13GB (up to 26GB with compression in QIC5010 format) with IBM DC5010 Data Cartridge (16G8574)
- #6486 will read:
- 8GB (QIC4DC compressed format) with SLR5-4GB
Data Cartridge (59H3660)
- 5GB (QIC2DC compressed format) with IBM DC9250
Data Cartridge (16G8436)
- 4GB (QIC4GB format) with SLR5-4GB Data
Cartridge (59H3660)
- 2.5GB (QIC2GB format) with IBM DC9250 Data
Cartridge (16G8436)
(#6490) 7.0GB 8mm Cart Tape Unit
Optional 7GB 8mm Cartridge Tape Unit can be
mounted in the system unit or #5064 System Unit Expansion. It may be used for
save/restore, alternate IPL, program distribution, migration and 8mm Cartridge
tape exchange.
Note: Tape unit #6481, #6485, and #6490 contain different mounting parts when
ordered for a Model S20 that supports tape concurrent maintenance, than when
ordered for a Model S10 that does not support tape concurrent maintenance.
Tape Unit Table - Migration Features
|-----------------------------------------------------------------|
|Feature| Size|Byte|SCSI|AIPL| IOP |HDC or |From |
|Kit | | |Type| | |Compaction |Feature... |
|-------|-----|----|----|----|---------|-----------|--------------|
|1349 |1.2GB| 1 |Fast|5516|2726 |None | 1251 1379 |
| | | | | |2740 | | 5348 6348 |
| | | | | |2741 | | 6368 7343 |
| | | | | |2748 | | 7348 8343 |
| | | | | |6513(2) | | 8348 9343 |
| | | | | |9728 | | 9348 |
|-------|-----|----|----|----|---------|-----------|--------------|
|1350 |2.5GB| 1 |Fast|5517|2726 |None | 1252 1260 |
| | | | | |2740 | | 1380 5349 |
| | | | | |2741 | | 6344 6349 |
| | | | | |2748 | | 6369 6380 (1)|
| | | | | |6513(2) | | 7344 7349 |
| | | | | |9728 | | 8344 8349 |
|-------|-----|----|----|----|---------|-----------|--------------|
|1355 |13GB | 2 |Fast|5518|2726 |Compaction | 6385 (1) |
| | | | | |2740 | | |
| | | | | |2741 | | |
| | | | | |2748 | | |
| | | | | |6513(2) | | |
| | | | | |9728 | | |
|-------|-----|----|----|----|---------|-----------|--------------|
|1360 | 7GB | 1 |Fast|5514|2726 |Compaction | 1261 6390 (1)|
| | | | | |2740 | | |
| | | | | |2741 | | |
| | | | | |2748 | | |
| | | | | |6513(2) | | |
| | | | | |9728 | | |
|-------|-----|----|----|----|---------|-----------|--------------|
|1379 |1.2GB| 1 |Fast|5516|6513 | None |
| | | | | |---------|-----------|
| | | | | |2624 | HDC |
|-------|-----|----|----|----|---------|-----------|
|1380 |2.5GB| 1 |Fast|5517|6513 | None |
| | | | | |---------|-----------|
| | | | | |2624 | HDC |
|--------------------------------------------------|
(1) This tape can be used without a kit if installed in an I/O tower instead of the system unit or #5064/#9364. (2) This controller is only allowed on a #5064/#9364 System Unit Expansion with #9331 Expansion unit for SPD cards. Other controllers attach to CEC or #5064/#9364 with #9329 Expansion Unit for PCI cards.Tape Unit Table - Features Supported
|---------------------------------------------------------------|
| New | Size |Byte| SCSI |ALT- | IOP |HDC or |
| Feature | | | Type | IPL| |Compaction |
|-----------|------|----|------|------|----------|--------------|
| 4482(2) | 4GB | 1 | Fast | 5506 |2748 |Compaction |
|-----------|------|----|------|------|----------|--------------|
| 4483(2) |16GB | 1 | Fast | 5531 |2748 |Compaction |
|-----------|------|----|------|------|----------|--------------|
| 4486(2) |25GB | 2 | Fast | 5536 |2748 |Compaction |
|-----------|------|----|------|------|----------|--------------|
| 6368 |1.2GB | 1 | Fast | 5516 |2621 | HDC |
|-----------|------|----|------|------|----------|--------------|
| 6369 |2.5GB | 1 | Fast | 5517 |2621 | HDC |
|-----------|------|----|------|------|----------|--------------|
| 6380 |2.5GB | 1 | Fast | 5517 |6513 | None |
| | | | | |2624 | HDC |
|-----------|------|----|------|------|----------|--------------|
| 6381 |2.5GB | 1 | Fast | 5517 |6513 |Compaction |
|-----------|------|----|------|------|----------|--------------|
| 6382 | 4GB | 1 | Fast | 5506 |6513 |Compaction |
|-----------|------|----|------|------|----------|--------------|
| 6383 |16GB | 2 | Fast | 5531 |6513 |Compaction |
|-----------|------|----|------|------|----------|--------------|
| 6385 |13GB | 2 | Fast | 5518 |6513 |Compaction |
|-----------|------|----|------|------|----------|--------------|
| 6386 |25GB | 2 | Fast | 5536 |6513 |Compaction |
|-----------|------|----|------|------|----------|--------------|
| 6386 |25GB | 2 | Fast | 5518 |6513 |Compaction |
|-----------|------|----|------|------|----------|--------------|
| 6390 | 7GB | 1 | Fast | 5514 |6513 |Compaction |
| | | | | |2624 | HDC |
|-----------|------|----|------|------|----------|--------------|
| 6480 |2.5GB | 1 | Fast | 5517 |2726 |None |
| 6481 |2.5GB | | | |2740 |Compaction |
| | | | | |2741 | |
| | | | | |2748 | |
| | | | | |6513(1) | |
| | | | | |9728 | |
|-----------|------|----|------|------|----------|--------------|
| 6482 | 4GB | 1 | Fast | 5506 |2726 |Compaction |
| | | | | |2740 | |
| | | | | |2741 | |
| | | | | |2748 | |
| | | | | |6513(1) | |
| | | | | |9728 | |
|-----------|------|----|------|------|----------|--------------|
| 6483 |16GB | 2 | Fast | 5531 |2726 |Compaction |
| | | | | |2740 | |
| | | | | |2741 | |
| | | | | |2748 | |
| | | | | |6513(1) | |
| | | | | |9728 | |
|-----------|------|----|------|------|----------|--------------|
| 6485 |13GB | 2 | Fast | 5518 |2726 |Compaction |
| 6486 |25GB | | | 5536 |2740 | |
| | | | | |2741 | |
| | | | | |2748 | |
| | | | | |6513(1) | |
| | | | | |9728 | |
|-----------|------|----|------|------|----------|--------------|
| 6490 | 7GB | 1 | Fast | 5514 |2726 |Compaction |
| | | | | |2740 | |
| | | | | |2741 | |
| | | | | |2748 | |
| | | | | |6513(1) | |
|---------------------------------------------------------------|
(1) This controller is only allowed on a #5064/#9364 System Unit Expansion with #9331 Expansion unit for SPD cards. Other controllers attach to CEC or #5064/#9364 with #9329 Expansion Unit for PCI cards. (2) This tape feature can only be installed in the #5065 Storage/PCI Expansion Tower.External Tape Device Maximums
S10 S20 S30 S40
-------------------------------------------------------------------------
| Tape Subsystem Group A|
| 8mm Cart 7208 External (2) 1 4 4 4
| 8mm Library - 9427 1 4 4 4
| 1/2-Inch Reel - 2440 0 4 4 4
| 9348 1 4 4 4
| System maximum for Group A 1 4 4 4
|------------------------------------------------------------------------
| Tape Subsystem Group B|
| 1/2-Inch Reel - 9347 0 0 0 0
| System maximum for Group B 0 0 0 0
|------------------------------------------------------------------------
| Tape Subsystem Group C|
| 1/2-Inch Cart - 3570, and 3590(1) 1 4 8 8
| 3480,3490 3490E Axx,Bxx,C10,Dxx 0 4 8 8
| other 3490Es (1) 1 4 8 8
| 1/2-Inch Reel - 3422/3430 0 4 8 8
| System maximum for Group C 1 4 8 8
|------------------------------------------------------------------------
| Tape Subsystem Group D|
| 1/4-Inch Cart - #5032 0 0 0 0
------------------------------------------------------------------------
System Maximum 1 4 8 8
(1) 3490E CXA and 3590 B1A can be placed into a 3494 library. The CX and B1A are counted towards the tape subsystem maximums while the 3494 library is not. (1) Each 7208-002, 012, 222 and 232w/#0501 counts as 1 7208.Each 7208-232w#0502 and 7208-234 counts as 2 7208s. Each
#0021 not tied to a 7208 already on the records counts as one 7208.External Optical Maximums:
S10 S20 S30 S40
----- ----- ----- -----
3995 Optical Libraries (Direct Attach(1)) 0 14 22 22
(1) LAN attached 3995 models are available for all AS/400e models.
Disk, Tape, and Diskette Unit Controllers
Disk unit and tape unit IOPs are considered
high-workload IOPs and thus require special consideration when configuring a
system. In addition to their workload capability IOPs can be streaming or
non-streaming.
Disk Unit IOPs
The AS/400 accommodates both internal and
external disk devices. All internal devices are controlled by the MFIOP, the
RAID 5 Disk Unit Controller (#6502), the Disk Unit Controller for RAID (#6512),
the Storage Device Controller (#6530) or the RAID Disk Unit Controller (#6532).
The external devices are controlled by the Direct Access Storage Device
Controller (#6500) or the Tape/Disk Device Controller (#6501).
The following limits are to be placed on
combinations of disk unit IOPs. It may be possible for a system to contain more
IOPs than these limits suggest if an IOP is being used to control tape, CD-ROM
or diskette.
Maximum Combinations of Disk Unit IOPsUsage S10 S20 S30 S40
----- --- --- --- ---
External 0 20 36 36
Internal 1 10 37 37
Total 1 21 37 37
Tape Unit IOPs
The AS/400 accommodates both internal and
external tape devices. All internal devices are controlled by the MFIOP, the
Storage Device Controller (#2624) or the Internal Tape Device Controller
(#6513). The external devices are controlled by the Removable Media Device
Attachment (#2621), the 34XX Magnetic Tape Subsystem Attachment (#2644), the
Magnetic Storage Device Controller (#6112), the Tape/Disk Device Controller
(#6501) or the Magnetic Media Controller (#6534).
Diskette Unit IOPs
The AS/400 accommodates the 9331 diskette
including both 5 1/4" and 8" sizes. Diskettes are controlled by the
Magnetic Storage Device Controller (#6112) or the Diskette Adapter (#6146).
(#2621) Removable Media Device Attachment
(For IBM US, No Longer Available as of June 30,
2000)
#2621 is an IOP that provides two ports of
differential SCSI for tape and optical attachment to the AS/400. #2621 includes
hardware data compression for tape devices. The following devices can be
attached.
- 2440-A12 1/2-Inch Reel Tape Unit
- 3995-042 Optical Library DataServer
- 3995-043 Optical Library DataServer
- 3995-142 Optical Library DataServer
- 3995-143 Optical Library DataServer
- 3995-A43 Optical Library DataServer
- 3995-C40 Optical Library DataServer
- 3995-C42 Optical Library DataServer
- 3995-C44 Optical Library DataServer
- 3995-C46 Optical Library DataServer
- 3995-C48 Optical Library DataServer
- #5032 Removable Media Cluster Box (not on Models S30, S40, and SB1)
- 7208-002 2.3GB 8mm Cartridge Tape Unit
- 7208-012 5.0GB 8mm Cartridge Tape Unit
- 7208-222 7.0GB 8mm Cartridge Tape Unit
- 7208-232 8mm Dual 5.0GB Cartridge Tape Subsystem
- #0501 counts as one 7208
- #0502 counts as two 7208s
- 7208-234 8mm Dual 7.0GB Cartridge Tape Subsystem
- Counts as two 7208s
- 9348-001 1/2-Inch Reel Tape Unit - Rack Mount
- 9348-002 1/2-Inch Reel Tape Unit - Table Top
- 9427-21X 8mm Tape Library: 20 cartridges, 1-2 drives
Each #2621 supports the following combinations
of tape/optical devices (some restrictions apply).
- One #5032
- One or two of any combination of 2440-A12, 7208-XXX, 9348-XXX
- One 3995-XXX
- One 9427-21X and (one 2440-A12, 7208-XXX or 9348-XXX)
The best performance can be obtained when the 9427 is attached to both ports of the #2621. This configuration does not allow the attachment of the 2440-A12, 7208-XXX or 9348-XXX.
The #2621 requires one card slot.
The configurator will specify #6534 for tape
devices that can be controlled by #6534. Tape devices that require two ports of
attachment to the AS/400 require #2621.
The configurator will specify the minimum
number of IOPs for the number of tape devices ordered. You may order additional
IOPs to attach one tape device per IOP. The following table identifies the
maximum number of IOPs, including those required for attaching one tape device
per IOP.
Maximum Number of #2621s
Usage S10 S20 S30 S40
-----------------------------------------------------------------External Tape 0 4 4 4
#5032 0 0 0 0
External Optical 0 14 22 22
Maximum Combined 0 20 28 28
(#2624) Storage Device Controller
(For IBM US, No Longer Available as of
December 28, 2001)
#2624 is an IOP with the ability to control up
to three internal SCSI tape devices and one diskette device (diskette requires
#6146).
#2624 will be specified on SXX models when a
diskette device is ordered. #2624 will not be specified for controlling tape;
however, an installed #2624 or a #2624 specified to support the addition of
diskette can also be used to control supported tape devices. When tape devices
are selected, the configurator will specify #6513 unless a #2624 already exists
or has been specified for diskette.
See Internal Tape Unit Summary for a list of
tape units supported.
The configurator will specify the minimum
number of IOPs for the tape devices ordered. The following table identifies the
maximum number of IOPs allowed.
Maximum Number of #2624s (1)
Usage S10 S20 S30 S40
------------------------------------------------------------Internal Tape 0 4 0 7
Diskette 0 2 0 2
Total 0 6 0 7
Note: (1) These maximums may be limited when used in combination with other
tape controllers. See Tape Unit IOPs
(#2644) 34XX Magnetic Tape Subsystem Attachment
(For IBM US, No Longer Available as of March
31, 1999)
#2644 is an IOP that provides a S/370 Channel
interface for attachment of the following devices:
- 3422-A01/B01 1/2-Inch Reel to Reel Tape Subsystem
- 3430-A01/B01 1/2-Inch Reel to Reel Tape Subsystem
- 3480-A11/B11 1/2-Inch Cartridge Tape Subsystem
- 3480-A22/B22 1/2-Inch Cartridge Tape Subsystem
- 3490-A01/A02/B02/B04 1/2-Inch Cartridge Tape Subsystem
- 3490-D31/D32 1/2-Inch Cartridge Tape Subsystem
- 3490E-A10/A20/B20/B40 1/2-Inch Cartridge Tape Subsystem
- 3490E-D41/D42 1/2-Inch Cartridge Tape Subsystem
- 3490E-C10/C11/C22 1/2-Inch Cartridge Tape Subsystem
- 3490E-C1A/C2A 1/2-Inch Cartridge Tape Subsystem
The #9980 (Serpentine Cable) is required for
attaching all #2644 supported devices except the 3490E-CXX. The 3490E-CXX is
attached using #9980 when "external cables" were ordered on the
3490E-CXX. When "internal cables" were ordered on the 3490E-CXX the
#9980 is not required. The #2644 requires one card slot.
The configurator will specify the minimum
number of IOPs for the tape devices ordered. The following table identifies the
maximum number of IOPs allowed.
Maximum Number of #2644s (1)Usage S10 S20 S30 S40
---------------------------------------------------------------External S/370 Tape 0 4 8 8
Note: (1) These maximums may be limited when used in combination with other
tape controllers. See Tape Unit IOPs.
(#6146) Diskette Adapter
(For IBM US, No Longer Available as of August
31, 1998)
#6146 is an IOA that provides for the
attachment of one SCSI diskette device. #6146 requires #2624 as a prerequisite.
The following diskette devices are supported:
- 9331-011 8-Inch Diskette Unit
- 9331-012 5.25-Inch Diskette Unit
- #6135 Diskette 5 1/4-Inch
#6146 can be added to any #2624 for the
purpose of controlling an external diskette. The addition of #6146 to #2624
does not reduce the #2624s ability to control internal tape devices; however,
the #2624 must be placed in the correct slot in order to control the tape
devices. When #6146 and #2624 are used for controlling diskette (and no
internal tape is being controlled), the #2624 can be placed in slots 3 thru 10
in expansion towers #5072 and #5073. #6146 and #2624 can not be installed in
Model S30 system units.
The following table identifies the maximum
number of IOAs:
Maximum Number of #6146s (1)Usage S10 S20 S30 S40
---------------------------------------------------------------External Diskette 0 2 2 2
Note: (1) These maximums may be limited when used in combination with other
diskette controllers. See Diskette Unit IOPs.
(#6501) Tape/Disk Device Controller
(For IBM US, No Longer Available as of July
31, 2001)
#6501 is an IOP that provides SCSI attachment
capability for external disk devices and external tape devices. Tape and disk
devices cannot be mixed on the same #6501.
The following disk devices are supported. #6501
can attach up to two 9337 devices in any combination of models.
- 9337-210 Disk Unit Enclosure
- 9337-215 Disk Unit Enclosure
- 9337-220 Disk Unit Enclosure
- 9337-225 Disk Unit Enclosure
- 9337-240 Disk Unit Enclosure
- 9337-420 Disk Unit Enclosure
- 9337-440 Disk Unit Enclosure
- 9337-480 Disk Unit Enclosure
- 9337-540/545 Disk Unit Enclosure
- 9337-580/585 Disk Unit Enclosure
- 9337-590/595 Disk Unit Enclosure
- IBM Versatile Storage Server
The configurator will specify #6534 for tape
devices that can be controlled by #6534.
The following tape devices are supported.
#6501 can attach up to two tape devices in any combination.
- 3490E E01/E11 1/2-Inch Cartridge Tape Subsystem
- 3490E F00/F01/F11 1/2-Inch Cartridge Tape Subsystem
- 3490E CXX with feature #5040
- 3570 1/2-Inch Cartridge Tape Subsystem
- Model B00 (standalone)
- Model B01 (standalone with RACL)
- Model B02 (standalone with RACL)
- Model B11 (rack mount with RACL)
- Model B12 (rack mount with RACL)
- C00 (standalone)
- C01 (standalone with RACL)
- C02 (standalone with RACL)
- C11 (rack mount with RACL)
- C12 (rack mount with RACL)
- C1A (mounts into 3575 Library)
- 3575 L06/L12/L18/L24/L32 Tape Library Dataserver
- 3590 1/2-Inch Cartridge Tape Subsystem
- Model B11 (mounts into 9309 rack)
- Model B1A (mounts into 3494 and 3495 libraries)
Card slots required: One.
The configurator will specify the minimum
number of IOPs for the devices order. You may order additional IOPs to attach
one tape device per IOP. The following table identifies the maximum number of
IOPs allowed, including those required for attaching one tape device per IOP.
Maximum Number of #6501s (1)Usage S10 S20 S30 S40
--------------------------------------------------------------External Tape 0 4 8 8
External Disk 0 20 36 36
Maximum Combined 0 20 44 44
Note: (1) These maximums may be limited when used in combination with other
disk and tape controllers. See Disk Unit IOPs and Tape Unit IOPs.
(#6513) Internal Tape Device Controller
(For IBM US, No Longer Available as of July
31, 2001)
#6513 is an IOP that can control up to four
internal SCSI tape devices. When used in system unit on Model S40, the #6513
controls two internal tape devices. When used in expansion tower (#5070, #5071,
#5072, or #5073) the #6513 controls up to four internal tape devices. #6513
requires OS/400 V3R7 (or later).
See Internal Tape Unit Summary for a list of
tape units supported.
#2624 will be specified on V4R1 systems when a
customer requires diskette or #1378. An installed #2624 or a #2624 specified to
support the addition of #1378 or diskette will also be used to control the
other supported tape devices (see description of #2624 for supported tapes).
#6513 requires one card slot.
The configurator will specify the minimum
number of IOPs for the tape devices on the order. The following table
identifies the maximum number of IOPs allowed.
Maximum Number of #6513s (1)
Usage S10 S20 S30 S40
-------------------------------------------------------------Internal Tape 0 5 5 5
Note: (1) These maximums may be limited when used in combination with other
tape controllers. See Tape Unit IOPs.
(#6532) RAID Disk Unit Controller
(For IBM US, No Longer Available as of June
30, 2000)
The #6532 is an Ultra SCSI controller with a
4MB write-cache that provides RAID-5 protection for internal disk units.
The #6532 is designed to control Ultra, Fast
Wide and Fast Narrow SCSI disk units that are installed in the Storage
Expansion Units (#5058) and Storage Expansion Towers (#5083). The #6532 will
also control Ultra, Fast Wide and Fast Narrow SCSI disk units that are
installed in the Storage Expansion Units (#5052) and Storage Expansion Towers
(#5082) but due to hardware limitations those disks will be controlled at Fast
Wide and Fast Narrow speeds. In addition to providing RAID-5 protection for
disks, #6532 is also designed to work as a high performance controller for
disks protected by system mirroring or disks with no protection. In the RAID-5
configuration, disk unit protection is provided at less cost than mirroring, and
with greater performance than system checksums. #6532 offers greater
performance than #6502, #6512 and #6530.
#6532 requires the V4R1 operating system.
#6532 will be specified on all orders when a disk controller is required except
when a #9751 is specified (See description for #9751).
When upgrading to SXX models, you can migrate
existing #6502, #6512 and #6530 disk unit controllers. System performance may
vary depending on the configuration and applications. You should determine
performance needs to ensure that the current controllers meet expectations.
The #6532 controller supports a maximum of 16
drives. A minimum of four drives of the same capacity are needed for a valid
RAID 5 configuration. A maximum of four arrays are allowed per controller, with
a maximum of 10 drives allowed per array. All drives in an array must be of the
same capacity. Parity is spread across four drives for arrays of four to seven
drives. Parity can be spread across either four or eight drives for arrays of
eight to ten drives. For systems started with eight to ten drives in an array
the parity, for that array, will be spread across eight drives. For systems
that are started with less than eight drives in an array and later upgraded to
eight, nine or ten drives the RAID function must be stopped and then started
before the parity will be spread across eight drives.
One #5058 or #5083 is required to support disk
units when using #6532. #5052 or #5082 can also be used to support disk units
but Ultra SCSI disks will be limited to Fast Wide SCSI speeds.
Refer to Internal Disk Unit Table for a list
of disks that can be placed into RAID-5 arrays.
For the best performance use disks, disk
controllers and storage expansion devices that are capable of Ultra SCSI
performance. See Storage Expansion Units/Towers and Disk Support.
Card slots used: One.
The following table identifies the maximum
number of IOPs allowed:
Maximum Number of #6532s (1)Usage S10 S20 S30 S40
--------------------------------------------------------------Internal Disks 0 9 36 36
Note: (1) These maximums may be limited when used in combination with other
disk controllers. See Disk Unit IOPs.
(#6533) RAID Disk Unit Controller
(For IBM US, No Longer Available as of May 31,
2001)
The #6533 is an Ultra SCSI controller with a
4MB write-cache that provides RAID-5 protection for internal disk units.
The #6533 controls Ultra, Fast Wide and Fast
Narrow SCSI disk units installed in the Storage Expansion Units (#5058),
Storage Expansion Towers (#5083) and System Unit Expansion #5064/#9364 with
Expansion Unit for SPD Cards #9331. The #6533 also controls Ultra, Fast Wide
and Fast Narrow SCSI disk units installed in the Storage Expansion Units
(#5052) and Storage Expansion Towers (#5082), which due to hardware
limitations, those disks will be controlled at Fast Wide and Fast Narrow
speeds. For the best performance use disks, disk controllers and storage
expansion devices capable of Ultra SCSI performance.
In addition to providing RAID-5 protection for
disks, #6533 also works as a high-performance controller for disks protected by
system mirroring or disks with no protection. In the RAID-5 configuration, disk
unit protection costs less than mirroring and performs better than system
checksums. #6533 offers greater performance than #6502, #6512, and #6530.
#6533 supports hardware disk compression,
enabled by the integration of data compression hardware directly into the
data-flow of the controller. Data is compressed and decompressed without
intervention from the AS/400 system processor. Disk Compression for the 17.54GB
disk units requires the support of OS/400 V4R4.
Capacity gains may vary as a function of the
compression algorithm and the characteristics of the data. Typically two times
compression can be expected, with up to four times possible. The disk capacity
gains from disk compression are not included in the maximum AS/400 model disk
capacity limits.
Disk compression can be used with or without
BRMS Hierarchical Storage Management (HSM) as part of a total storage
management strategy including high-performance disk, compressed disk, and tape
automation.
Compressed disks have the same disk subsystem
availability options (i.e., RAID-5, mirroring) as uncompressed disks, with no
additional restrictions. Disk compression is supported only in user auxiliary
storage pools (user ASPs). The user selects which disk arms to compress via a
new Disk Manager screen, and disk capacity screens reflect the projected disk
capacity and the percent used.
Due to the overhead of
compression/decompression, and the variations in the length of data written to
disk, the performance of compressed disk will in most cases be slower than
uncompressed, high-performance disk drives. Access additional information at:
www.as400.ibm.com/hsmcomp
The #6533 controller supports a maximum of 16
drives. A minimum of four drives of the same capacity are needed for a valid
RAID-5 configuration. A maximum of four arrays are allowed per controller, with
a maximum of ten drives allowed per array. All drives in an array must be of
the same capacity. Parity is spread across four drives for arrays of four to
seven drives. Parity can be spread across either four or eight drives for
arrays of eight to ten drives. For systems started with eight to ten drives in
an array, the parity for that array will be spread across eight drives. For
systems started with less than eight drives in an array (and later upgraded to
eight, nine, or ten drives), the RAID function must be stopped and then started
before the parity can be spread across eight drives.
OS/400 V4R2, or later, is required. #6533 will
be specified on all V4R2 orders when an SPD disk controller is required. One
#5058, #5083, or #9331 is required to support disk units #5052 or #5082 can
also be used to support disk units but Ultra SCSI disks will be limited to Fast
Wide SCSI speeds.
SPD card slots required: One. Models: S20,
S30, and S40.
(#6534) Magnetic Media Controller
(For IBM US, No Longer Available as of May 31,
2001)
#6534 is an Ultra SCSI Tape IOP that provides
attachment capability for the following external tape devices. #6534 will be
the default tape controller for systems with V4R1. #6534 can attach one tape
drive. Tape devices that require two ports of attachment to the AS/400 require
#2621.
- 3490E E01/E11 1/2-Inch Cartridge Tape Subsystem
- 3490 F00/F01/F11/F1A 1/2-Inch Cartridge Tape Subsystem
- 3490E CXX with feature #5040
- 3494 L10/L12/D10/D12 Cartridge Tape Library
- 3570 1/2-Inch Cartridge Tape Subsystem
- Model B00 (standalone)
- Model B01 (standalone with RACL)
- Model B02 (standalone with RACL)
- Model B11 (rack mount with RACL)
- Model B12 (rack mount with RACL)
- C00 (standalone)
- C01 (standalone with RACL)
- C02 (standalone with RACL)
- C11 (rack mount with RACL)
- C12 (rack mount with RACL)
- C1A (mounts into 3575 Library)
- 3575 L06/L12/L18/L24/L32 Tape Library Dataserver
- 3590 1/2-Inch Cartridge Tape Subsystem
- Model B11 (mounts into 9309 rack)
- Model B1A (mounts into 3494 and 3495 libraries)
- 3995-C40/C42/C44/C46/C48 Optical Library Dataservers
- 7208-012 5.0GB 8mm Cartridge Tape Unit
- 7208-222 7.0GB 8mm Cartridge Tape Unit
- 7208-232 8mm Dual 5.0GB Cartridge Tape Subsystem
- #0501 counts as one 7208
- #0502 counts as two 7208s
- 7208-234 8mm Dual 7.0GB Cartridge Tape Subsystem
- Counts as two 7208s
- 7208-342 8mm Tape Drive
- 9348-001 1/2-Inch Reel Tape Unit - Rack Mount
- 9348-002 1/2-Inch Reel Tape Unit - Table Top
- 9427-21X 8mm Tape Library: 20 cartridges, 1-2 drives
Card slots required: One.
Maximum Number of #6534s (1)Usage S10 S20 S30 S40
-------------------------------------------------------------External Tape 0 4 8 8
Note: (1) These maximums may be limited when used in combination with other
tape controllers. See Tape Unit IOPs.
(#9751) MFIOP with RAID
(For IBM US, No Longer Available as of May 31,
1999)
The #9751 MFIOP contains an Ultra SCSI
controller with a 4MB write-cache that provides RAID-5 protection for up to 20
internal disk units. This is the first controller for the AS/400 that allows
all disk units in the system unit towers to be placed into a RAID-5 array.
#9751 also controls the internal CD-ROM drive, one internal tape unit and LAN,
communications and twinaxial controllers.
The #9751 is designed to control Ultra, Fast
Wide and Fast Narrow SCSI disk units. In addition to providing RAID-5
protection for disks, #9751 is also designed to work as a high performance
controller for disks protected by system mirroring or disks with no protection.
In the RAID-5 configuration, disk unit protection is provided at less cost than
mirroring, and with greater performance than system checksums.
#9751 requires the V4R1 operating system and
will be specified on all new 6XX and SXX orders. #9751 is only allowed on the
system unit towers.
Like the #6532, the #9751 includes a 4MB
write-cache and faster microprocessor and memory for increased performance
compared with the 2MB write-cache #6502 disk unit controller.
#9751 supports up to 20 internal disk units.
Model S30 usage of #9751 supports disks one through 12 without prerequisites
and disks 13 through 20 with #5055. Model S40 usage of #9751 supports disks one
through four without prerequisites and disks five through 20 with #5057. A
minimum of four drives of the same capacity are needed for a valid
configuration using the RAID 5 disk unit controller. A maximum of four arrays
are allowed per controller, with a maximum of 10 drives allowed per array. All
drives in an array must be of the same capacity. Parity is spread across four
drives for arrays of four to seven drives. Parity can be spread across either
four or eight drives for arrays of eight to ten drives. For systems started
with eight to ten drives in an array the parity, for that array, will be spread
across eight drives. For systems that are started with less than eight drives
in an array and later upgraded to eight, nine, or ten drives the RAID function
must be stopped and then started before the parity will be spread across eight
drives. Card slots used: Two.
Refer to Disk Unit Table for a list of
supported disk units and for whether those disk units can be placed into a
RAID-5 array.
See Tape Unit Table for a list of supported
tape units.
See Multi-Function Controllers for a list of
supported LAN, communications, and workstation IOAs.
For the best performance use disks, disk
controllers, and storage expansion devices that are capable of Ultra SCSI performance.
See Storage Expansion Units/Towers and Disk Support.
(#9754) Base MFIOP with RAID
(For IBM US, No Longer Available as of
December 28, 2001)
The #9754 MFIOP contains an Ultra SCSI
controller with a 4MB write-cache that provides RAID-5 protection for up to 20
internal disk units. This is the follow-on controller to the #9751, and, like
the #9751, allows all disk units in the system unit towers to be placed into a
RAID-5 array. #9754 also controls the internal CD-ROM drive, one internal tape
unit, and LAN, communications, and twinaxial controllers.
#9754 is included on new orders for Models S30
and S40, with OS/400 V4R2. #9754 is also included on upgrades with OS/400 V4R2
from models other than S30 and S40. The #9754 controls Ultra, Fast Wide and
Fast Narrow SCSI disk units. For the best performance use disks, disk
controllers and storage expansion devices capable of Ultra SCSI performance.
In addition to providing RAID-5 protection for
disks, #9754 also works as a high-performance controller for disks protected by
system mirroring or disks with no protection. In the RAID-5 configuration, disk
unit protection costs less than mirroring and performs better than system
checksums.
#9754 supports hardware disk compression,
enabled by the integration of data compression hardware directly into the
data-flow of the controller. Data is compressed and decompressed without
intervention from the AS/400 system processor. Disk Compression for the 17.54GB
disk units requires the support of OS/400 V4R4.
Capacity gains may vary as a function of the
compression algorithm and the characteristics of the data. Typically two times
compression can be expected, with up to four times possible. The disk capacity
gains from disk compression are not included in the maximum AS/400 model disk
capacity limits.
Disk compression can be used with or without
BRMS Hierarchical Storage Management (HSM) as part of a total storage
management strategy including high-performance disk, compressed disk, and tape
automation.
Compressed disks have the same disk subsystem
availability options (i.e., RAID-5, mirroring) as uncompressed disks, with no
additional restrictions. Disk compression is supported only in user auxiliary
storage pools (user ASPs). The user selects which disk arms to compress via a
new Disk Manager screen, and disk capacity screens reflect the projected disk
capacity and the percent used.
Due to the overhead of
compression/decompression, and the variations in the length of data written to
disk, the performance of compressed disk will in most cases be slower than
uncompressed, high-performance disk drives. Access additional information at:
www.as400.ibm.com/hsmcomp
#9754 supports up to 20 internal disk units.
The Model 640 and S30 usage of #9754 supports disks one through 12 without
prerequisites and disks 13 through 20 with #5055. The Model 650 and S40 usage
of #9754 supports disks one through four without prerequisites and disks five
through 20 with #5057. The SB1 allows only four disks to be attached. A minimum
of four drives of the same capacity are needed for a valid configuration using
the RAID-5 disk unit controller. A maximum of four arrays are allowed per
controller, with a maximum of ten drives allowed per array. All drives in an
array must be of the same capacity. Parity is spread across four drives for
arrays of four to seven drives. Parity can be spread across either four or
eight drives for arrays of eight to ten drives. For systems started with eight
to ten drives in an array, the parity for that array will be spread across
eight drives. For systems that are started with less than eight drives in an
array (and later upgraded to eight, nine, or ten drives), the RAID function
must be stopped and then started before the parity can be spread across eight
drives. Card slots used: Two. Maximum: One. Models: S30 and S40.
PCI Disk, Tape, CD-ROM, and Diskette Unit IOA Features
(#2718) PCI Magnetic Media Controller
(For IBM US, No Longer Available as of July 2,
2002)
A SCSI Tape IOA for attaching the IBM 7207
Model 122 SLR5 QIC External Tape Drive. #2718 can attach one tape drive.
Prerequisites: Storage/PCI Expansion Tower
(#5065) on Models S30 and S40. One SCSI PCI slot required on Models S10 and
S20.
Maximum: Eight (maximums may be limited when
used in combination with other tape controllers). Requires OS/400 V4R2, or
later.
(#2726) PCI RAID Disk Unit Controller
(For IBM US, No Longer Available as of June
30, 2000)
The #2726 is an Ultra SCSI disk and tape
controller with a 4MB write-cache that provides RAID-5 protection for internal
disk units.
The #2726 is designed to control Ultra, Fast
Wide and Fast Narrow SCSI disk and tape units that are installed in the base
system unit and the System Unit Expansion #5064/#9364 with Expansion Unit for
PCI cards #9329. In addition to providing RAID-5 protection for disks, #2726 is
also designed to work as a high performance controller for disks protected by
system mirroring or disks with no protection. In the RAID-5 configuration, disk
unit protection is provided at less cost than mirroring, and with greater
performance than system checksums.
The #2726 controller supports a maximum of 15
drives. A minimum of four drives of the same capacity are needed for a valid
RAID 5 configuration. A maximum of three arrays are allowed per controller,
with a maximum of 10 drives allowed per array. All drives in an array must be
of the same capacity. Parity is spread across four drives for arrays of four to
seven drives. Parity can be spread across either four or eight drives for
arrays of eight to ten drives. For systems started with eight to ten drives in
an array the parity, for that array, will be spread across 8 drives. For
systems that are started with less than eight drives in an array and later
upgraded to eight, nine, or ten drives the raid function must be stopped and
then started before the parity will be spread across eight drives.
The #2726 also supports one CD-ROM and one
internal tape unit when placed in the system unit. When placed in the
#5064/#9364 System Unit Expansion. the #2726 can support up to three internal
tape units.
Refer to Disk Unit Table for a list of disks
that can be placed into RAID-5 arrays.
Refer to Tape Unit Table for a list of tapes
that are supported by the #2726.
Prerequisite: System unit or #5064 with #9329.
High-speed PCI card slots required: One. Maximums: One in the system unit, or
one in the #9329. Only one #9728/#2726 allowed in the system unit. Only one
#2726 allowed in the #9329.
(#2729) PCI Magnetic Media Controller
(For IBM US, No Longer Available as of July 2,
2002)
A SCSI Tape IOA that attaches external tape
devices and external optical devices. #2729 can attach one tape drive or one
optical drive.
Tape devices that require two ports of
attachment to the AS/400 require #2621.
Prerequisites: Storage/PCI Expansion Tower
(#5065) on Models S30 and S40. One SCSI PCI slot required on Models S10 and
S20.
Maximum: Eight (maximums may be limited when
used in combination with other tape controllers). Requires OS/400 V4R1, or
later.
(#2740) PCI RAID Disk Unit Controller
(For IBM US, No Longer Available as of May 31,
2001)
The #2740 is an Ultra SCSI disk and tape
controller with a 4 MB write-cache that provides RAID-5 protection for internal
disk units. The #2740 controls Ultra, Fast Wide and Fast Narrow SCSI disk and
tape units installed in the base system unit. In addition to providing RAID-5
protection for disks, #2740 also works as a high-performance controller for
disks protected by system mirroring or disks with no protection.
The #2740 controller supports a maximum of ten
drives. A minimum of four drives of the same capacity are needed for a valid
RAID-5 configuration. A maximum of two arrays are allowed per controller, with
a maximum of ten drives allowed per array. All drives in an array must be of
the same capacity. Parity is spread across four drives for arrays of four to
seven drives. Parity can be spread across either four or eight drives for
arrays of eight to ten drives. For systems started with eight to ten drives in
an array, the parity for that array will be spread across eight drives. For
systems are started with less than eight drives in an array (and later
field-upgraded eight, nine, or ten drives), the RAID function must be stopped
and then started before the parity can be spread across eight drives.
The #2740 also supports one CD-ROM and one
internal tape unit when placed in the system unit.
One high-speed PCI card slot is required.
Maximums: One #9728/#2726/#2740/#2741 allowed in Models S10 and S20. OS/400
V4R2, or later, is required.
(#2741) PCI RAID Disk Unit Controller
(For IBM US, No Longer Available as of May 31,
2001)
The #2741 is an Ultra SCSI disk and tape
controller with a 4MB write-cache that provides RAID-5 protection for internal
disk units. This controller is disk compression enabled.
The #2741 controls Ultra, Fast Wide and Fast
Narrow SCSI disk and tape units installed in the base system unit and the
System Unit Expansion (#5064/#9364) with PCI Integrated Expansion Unit (#9329).
In addition to providing RAID-5 protection for disks, #2741 also works as a
high-performance controller for disks protected by system mirroring or disks
with no protection.
The #2741 controller supports a maximum of 15
drives. A minimum of four drives of the same capacity are needed for a valid
RAID-5 configuration. A maximum of three arrays are allowed per controller,
with a maximum of ten drives allowed per array. All drives in an array must be
of the same capacity. Parity is spread across four drives for arrays of four to
seven drives. Parity can be spread across either four or eight drives for
arrays of eight to ten drives. For systems started with eight to ten drives in
an array, the parity for that array will be spread across eight drives. For
systems started with less than eight drives in an array (and later upgraded to
eight, nine, or ten drives), the RAID function must be stopped and then started
before the parity can be spread across eight drives.
#2741 supports hardware disk compression,
enabled by the integration of data compression hardware directly into the
data-flow of the controller. Data is compressed and decompressed without
intervention from the AS/400 system processor. Disk Compression for the 17.54GB
disk units requires the support of OS/400 V4R4.
Capacity gains may vary as a function of the
compression algorithm and the characteristics of the data. Typically two times
compression can be expected, with up to four times possible. The disk capacity
gains from disk compression are not included in the maximum AS/400 model disk capacity
limits.
Disk compression can be used with or without
BRMS Hierarchical Storage Management (HSM) as part of a total storage
management strategy including high-performance disk, compressed disk, and tape
automation.
Compressed disks have the same disk subsystem
availability options (i.e., RAID-5, mirroring) as uncompressed disks, with no
additional restrictions. Disk compression is supported only in user auxiliary
storage pools (user ASPs). The user selects which disk arms to compress via a
new Disk Manager screen, and disk capacity screens reflect the projected disk
capacity and the percent used.
Due to the overhead of
compression/decompression, and the variations in the length of data written to
disk, the performance of compressed disk will in most cases be slower than
uncompressed, high-performance disk drives. Access additional information at:
www.as400.ibm.com/hsmcomp
The #2741 also supports one CD-ROM and one
internal tape unit when placed in the system unit. When placed in the
#5064/#9364 System Unit Expansion, the #2741 can support up to three internal
tape units.
Prerequisites: System unit or #5064/#9364
(System Unit Expansion) with #9329 (PCI Integrated Expansion Unit). High-speed
PCI card slots required: One. Maximums: One in the system unit, one in #9329.
Only one #9728/#2726/#2740/#2741 allowed in the system unit. Only one
#2726/#2741 allowed in the #9329. Model: S20. OS/400 V4R2, or later, is
required. #2741 will be specified on all V4R2 orders when a PCI disk controller
is required.
(#2748) PCI RAID Disk Unit Controller
(For IBM US, No Longer Available as of July 2,
2002)
This controller with a 26MB write-cache,
provides RAID-5 protection and compression for internal disk units, and also
supports internal tape and CD-ROM units.
#2748 supports both compression and
non-compression modes. The mode of operation is determined by a hardware
jumper. #2748 is shipped with the jumper set in non-compression mode.
The #2748 controls Ultra2, Ultra, and Fast
Wide SCSI disk units. In addition to RAID-5 protection for disks, #2748 serves
as a high-performance controller for disks protected by system mirroring or
disks with no protection. In the RAID-5 configuration, disk unit protection
costs less than mirroring.
#2748 also supports #4331/#6831 (1.6GB Read
Cache Device), which can increase performance in read intensive applications.
#4331/#6831 is supported only when #2748 is not in compression mode. #2748 is
specified on all new system orders with OS/400 V4R4, when a PCI disk controller
is required.
The #2748 controller supports a maximum of 15
disk units. A minimum of four disk units of the same capacity are needed for a
valid RAID 5 configuration. A maximum of three arrays are allowed per
controller, with a maximum of ten disk units allowed per array. All disk units
in an array must be of the same capacity. Parity is spread across four disk
units for arrays of four to seven disk units. Parity can be spread across
either four or eight disk units for arrays of eight to ten disk units. Systems
with eight to ten disk units in an array find the parity, for that array,
spread across eight disk units. For systems with fewer than eight disk units in
an array, and later upgraded to eight, nine, or ten disk units, the RAID
function must be stopped and then started before parity will be spread across
eight disk units.
For best performance use disks, disk
controllers, and storage expansion devices capable of Ultra2 SCSI performance.
Prerequisites: Storage/PCI Expansion Tower
(#5065) on Models S30 and S40. One SCSI PCI slot required on Models S10 and S20
without #5064 (System Unit Expansion). Model S20 with #5064 require #9330 (PCI
Integrated Expansion Unit, and a SCSI PCI slot. OS/400 V4R4 with PTF MF22587,
or Cumulative (cum) PTF package C9229440, or later, is required.
(#4331) 1.6GB Read Cache Device
(For IBM US, No Longer Available as of March
1, 2002)
(#6831) 1.6GB Read Cache Device
(For IBM US, No Longer Available as of March
1, 2002)
1.6GB of storage for larger read-cache
function allows the most actively read data to be accessible via solid state
disk.
#4331 installs into the #5065 Storage/PCI
Expansion Tower on Models S20, S30, and S40, and is supported by the #2748 PCI
RAID Disk Unit Controller.
#6831 can be installed in Models S10 and S20
system units, or Model S20 System Unit Expansion (#5064/#9364 with #9330 PCI
Integrated Expansion Unit), and is supported by the PCI RAID Disk Unit
Controller (#2748).
Prerequisites: PCI RAID Disk Unit Controller
(#2748) One DASD slot. OS/400 V4R4 with PTF MF22587, or Cumulative (cum) PTF
package C9229440, or later, is required. Maximum: One per #2748.
(#9728) Base PCI Disk Unit Controller
(For IBM US, No Longer Available as of July 2,
2002)
#9728 is the base IOA for the system unit.
#9728 is a disk and tape controller that provides ULTRA SCSI attachment
capability for up to five internal disk units one internal CD-ROM, and one
internal tape. This controller does not support RAID.
Refer to Disk Unit Table for a list of disks
that can be controlled by #9728.
Refer to Tape Unit Table for list of tapes
that can be supported by the #9728.
High-speed PCI card slots required: One. Only
one #9728/#2726 allowed in the system unit. Not allowed with #0044, Device
Parity Protection.
Workstation Controllers
Maximum Number of Workstation Controllers
Custom Mixed-ModeWorkstation Features S10 S20 S30 S40 S20 S30
-----------------------------------------------------------------6050 + 9050 + 9280 1 3 3 3 60 175
+ 6141 + 9141 + 6180 + 6140 + 9140Note: #6050, #9050, #6140, and #9140 are support only and cannot be ordered.
Twinaxial Workstation Adapter/Controllers
Each twinaxial workstation adapter/controller
provides support for up to 40 5250 type displays or printers.
(#6180) Twinaxial Workstation IOA
(For IBM US, No Longer Available as of July
31, 2001)
(#9280) Twinaxial Workstation IOA
(For IBM US, No Longer Available as of
December 28, 2001)
The Twinaxial Workstation IOA provides support
for up to 40 5250 type displays or printers. It supports the 5250 Express Data
Stream which provides enhanced twinaxial device throughput to supported
devices. See table below for maximum number of displays or printers supported
by each e-server model. One #6180 or #9280 is allowed in slot C of the MFIOP
unless the system console is ASCII. All other Twinaxial Workstation IOAs must
be placed into #2629s.
#9280 is specified on new orders for Models
S30 and S40 by the marketing configurators when a twinaxial workstation is
required and an ASCII workstation controller is not specified. #6180 is
specified for the twinaxial workstation controller on Models S20, S30 and S40
if the customer requires both a twinaxial workstation controller and an ASCII
workstation controller. #9280 and #6180 require V4R1. Includes 20-foot
attachment cable/8-port breakout box.
PCI Based Twinaxial Workstation Adapter/Controllers
(#2720) PCI WAN/Twinaxial IOA
(For IBM US, No Longer Available as of July 2,
2002)
The PCI WAN/Twinaxial IOA provides support for
up to 28 5250 type displays or printers. It supports the 5250 Express Data
Stream which provides enhanced twinaxial device throughput to supported
devices. See table below for maximum number of displays or printers supported
by each e-server model. A cable with a 4-port expansion box comes with the
adapter. Each port supports seven attached devices allowing the twinaxial controller
to support 28 total active devices and 28 attached devices. This adapter also
provides a single communication line. See description of adapter in the
communications section.
PCI card slots required: One.
(#2722) PCI Twinaxial Workstation IOA
The PCI Twinaxial Workstation IOA provides
support for 40 5250 type displays or printers on Model S20. It supports the
5250 Express Data Stream which provides enhanced twinaxial device throughput to
supported devices. A cable with a 8-port expansion box comes with the adapter.
Each port supports seven attached devices allowing for 56 attached devices of
which only 40 can be active.
#2722 is specified when additional PCI
twinaxial workstation controllers are required.
PCI Card Slots required: One.
(#2746) PCI Twinaxial Workstation IOA
Supports up to 40 active 5250 type displays
and printers. A 20-foot cable with an 8-port expansion box comes with the
adapter. Each port supports seven attached devices allowing for 56 attached
devices, of which only 40 can be active. #2746 is specified when additional PCI
twinaxial workstation controllers are required.
Prerequisites: Storage/PCI Expansion Tower
(#5065) on Models S30 and S40. One PCI slot is required on Models S10 and S20.
OS/400 V4R4 with PTF MF22587, or Cumulative (cum) PTF package C9229440, or
later, is required.
(#9720) Base PCI WAN/Twinaxial IOA
(For IBM US, No Longer Available as of July 2,
2002)
This combined base twinaxial/communication
adapter supports 28 twinaxial addresses. A cable with a 4-port expansion box
comes with the adapter. Also a 20-ft twinaxial cable is shipped with this
adapter on new systems for attachment of the console. Each port supports seven
attached devices allowing the twinaxial controller to support 28 total active
devices and 28 attached devices. This adapter also provides a single
communication line. See description of adapter in the communications section.
PCI card slots required: One.
ASCII Workstation Adapter/Controllers
(#6141, #9141) ASCII Workstation Controller
(For IBM US, No Longer Available as of March
31, 1999)
The ASCII workstation controller provides
support for six ASCII devices. With #6142 attached the #6141 or #9141 can
support 18 ASCII devices.
#9141 is a base workstation controller,
available only on new orders. #6141 is an optional feature ASCII workstation
controller. Card slots required: One.
Maximum Number of ASCII IOPs CustomMixed-Mode
Features S10 S20 S30 S40 S20 S30
-----------------------------------------------------------------#9141 / #6141 0 2 2 2 58 175
(#6142) ASCII 12-Port Attachment
(For IBM US, No Longer Available as of March
31, 1999)
This feature provides an additional 12 ports
to the six provided by #6141 or #9141. One #6142 may attach per #6141 or #9141.
Supported on custom mixed-mode S20 and S30. Card slots required: None.
Maximum Number of Displays or Printers
Custom Mixed-ModeType S10 S20 S30 S40 S20 S30
-----------------------------------------------------------------Twinaxial 28 28 28 28 2392 7000
ASCII 0 28 28 28 1044 3150
Note: This does not change the performance characteristics of interactive work
on the custom e-servers; the number of workstations that can be supported is
determined by the applications being used and not the ability to attach them to
the system.
LANs
LAN Ports by Model------------------
S10 S20 S30 S40
----- ----- ----- -----
Minimum 1 1 1 11
Maximum 3 16 32 48
(#2618, #8664) Fiber Distributed Data Interface Adapter
(For IBM US, No Longer Available as of August
31, 1998)
This feature provides one interface to connect
an AS/400 system to an FDDI LAN which complies with ANSI X3T9.5 and ISO 9314
standards. Feature #2618 consists of a card, a wrap connector and Licensed
Internal Code which supplies IEEE 802.2 Logical Link Control (LLC), ANSI
X3T9.5/ISO 9314 Media Access Control (MAC) functions, and ANSI X3T9.5 Station
Management (SMT) functions (draft version 7.2 level which is compatible with
version 6.2).
Order #8664 for Fiber Distributed Data
Interface Adapter as the optional base LAN on Models S30, S40, and SB1. Order
feature #2618 as an optional feature LAN I/O Card Slots Used: One.
Cables: The FDDI Adapter requires multi-mode
(62.5/125 micron) FDDI optical fiber jumper cables to connect the adapter into
the FDDI ring. These jumper cables are not provided with this feature. Jumper
cables are the responsibility of the customer and may be ordered from your
local authorized IBM cabling distributor or by calling 800-IBM-2468 in the
United States. For EMEA customers, cables are available from Montpellier
through CE offerings.
(#2663) I/O Attachment Processor
(For IBM US, No Longer Available as of August
31, 1998)
This I/O processor is required to attach the
AS/400 Wireless LAN Adapter, feature #2668. Card slots required: One.
(#2668) AS/400 Wireless LAN Adapter
(For IBM US, No Longer Available as of August
31, 1998)
The AS/400 Wireless LAN Adapter provides
wireless connectivity from AS/400 systems to workstations within a wireless LAN
area. With the wireless LAN connection, end-users can have roaming, portable
access to the information they need wherever they are within the area of local
wireless radio coverage. This feature includes one adapter card. This feature
code may have country specific usage.
One of the following cables must be specified
when ordering feature #2668:
- #9814 20-Ft Antenna Cable (For IBM US, No Longer Available as of
August 31, 1998)
- #9815 50-Ft Antenna Cable (For IBM US, No Longer Available as of
August 31, 1998)
One of the following antenna must be specified
when ordering feature #2668. These antennas may have country specific usage.
- #9889 Yagi Directional Antenna (may not be available in all
countries) (For IBM US, No Longer Available as of August 31, 1998)
- #9890 Omni-Directional (360 Degree) (For IBM US, No Longer
Available as of August 31, 1998)
- #9891 Hemispherical (180 Degree) (For IBM US, No Longer Available
as of August 31, 1998)
- #9892 Directional (90 Degree) (For IBM US, No Longer Available as
of August 31, 1998)
Prerequisite: Feature #2663 -I/O Attachment
Processor. The antenna cables and antennae are available as accessories I/O
Card Slots Used: None. Plugs into #2663.
(#2810) LAN/WAN IOP
(For IBM US, No Longer Available as of May 31,
2001)
The LAN/WAN IOP is required for attaching the
following LAN/WAN PCI adapters:
- #2838 PCI 100/10Mbps Ethernet IOA
- #9738 Base PCI 100/10Mbps Ethernet
#2810 is considered a high-workload IOP and
may be subject to configuration limitations. Card slots required: One.
(#6149, #9249) 16/4Mbps Token-Ring IOA
(For IBM US, No Longer Available as of May 31,
2001)
The 16/4Mbps Token-Ring IOA feature provides a
single attachment to either a 16Mbps or a 4Mbps IBM Token-Ring Network. The
feature consists of an IOA card, internal code which supplies IEEE 802.5 Media
Access Control (MAC) and IEEE 802.2 Logical Link Control (LLC) functions. The
16/4 Token-Ring IOA is capable of operating in half or full duplex mode.
#6149 and #9249 each come standard with a 2.44
meter (8-foot) Token-Ring cable. Alternatively, the customer can attach a
separately purchased twisted pair cable to the RJ45 connection on the IOA. The
standard IBM Cabling System patch cables can increase the length where
necessary.
#6149 and #9249 each require #2629, #6616 or
the MFIOP as a prerequisite. Requires OS/400 V4R1.
#9249 is the default base LAN on Models S30
and S40 with V4R1. Feature #6149 is an optional feature LAN. I/O Card Slots
Used: None. IOA slots used: One.
(#6181) Ethernet/IEEE 802.3 IOA
(For IBM US, No Longer Available as of July
31, 2001)
(#9381) Ethernet/IEEE 802.3 IOA
(For IBM US, No Longer Available as of
December 28, 2001)
The Ethernet/IEEE 802.3 Adapter/HP provides a
single attachment to one Carrier Sense Multiple Access/Collision Detect Local
Area Network. The feature consists of an adapter card and internal code which
supplies Ethernet version 2 and IEEE 802.3 Media Access Control (MAC) plus IEEE
802.2 Logical Link Control (LLC) functions. The Ethernet/IEEE 802.3 IOA is
capable of operating in half or full duplex mode.
#6181 and #9381 each have an RJ45 connector
for attachment of customer-supplied cabling and a 15 pin D-Shell as an
alternative for attachment of an IBM AUI cable. RJ45 twisted-pair cable must be
ordered separately. The following cable can be ordered if the customer is
choosing IBM AUI cabling:
· #9025 Ethernet Cable (3 meter AUI)
Note: This cable can be ordered without an adapter for customers who must change their cable on an installed system.
#9381 is the base Ethernet/IEEE 802.3
Adapter/HP LAN on Models S30 and S40 with V4R1. Feature #6181 is an optional
feature LAN.
Prerequisites: #2629, #6616, or the MFIOP.
Requires OS/400 V4R1. I/O Card Slots Used: None. IOA slots used: One.
See the description for feature #5072 and
#5073 in Expansion Features for restrictions due to +12V power limitations.
File Serving I/O Processors
(#2851) PCI Integrated PC Server
(For IBM US, No Longer Available as of March
31, 1999)
The PCI Integrated PC Server contains a 166MHz
Pentium processor, four main storage slots, and two LAN IOA slots. This adapter
requires two reserved PCI card positions, one for the processor card and the
second for a bridge card to interface the processor to the system. The PCI
Integrated PC Server comes with 32MB of memory and supports up to three of the
following memory features:
- #2860 - 16MB IOP Memory
(For IBM US, No Longer Available as of March 31, 1999)
- #2861 - 32MB IOP Memory
Each LAN IOA slot can contain either a
Token-Ring IOA or an Ethernet IOA. The Pentium IOA is capable of supporting
both IOAs in any combination. At least one LAN IOA feature is required. The
features for the LAN IOAs are as follows:
- #2723 - PCI Ethernet IOA (support only)
- #2724 - PCI 16/4Mbps Token-Ring IOA
- #9723 - Base PCI Ethernet IOA (support only)
- #9724 - Base PCI Token-Ring IOA (support only)
PCI card slots Required: None. Reserved
positions exist in the base system unit and in the #9329 PCI Integrated Expansion
Unit for the two cards used by this feature.
Maximums: One in the base system unit and one
in the #9329 PCI Integrated Expansion Unit.
(#2854) PCI Integrated PC Server
(For IBM US, No Longer Available as of May 31,
1999)
Contains a 200MHz Pentium Pro processor, four
main storage slots, and two LAN IOA slots. This adapter requires two reserved
PCI card positions, one for the processor card and the second for a bridge card
to interface the processor to the system. #2854 comes with a special cable that
translates the connector on the back of the bridge card to industry-standard
keyboard, mouse, serial and parallel connectors.
Each memory card slot can contain either a
32MB memory card or a 128MB memory card producing a total memory capacity
ranging from 32MB to 512MB. At least one memory card is required. The feature
numbers for the memory cards are as follows:
- #2861 32MB IOP Memory
- #2862 128MB IOP Memory
Each LAN IOA slot can contain a PCI Token-Ring
IOA, a PCI Ethernet IOA, or the PCI 100/10Mbps Ethernet IOA. The Integrated PC
Server can support two IOAs in any combination with a maximum of one 100/10Mbps
Ethernet. At least one LAN IOA feature is required. The features for the LAN
IOAs are as follows:
- #2723 PCI Ethernet IOA (support only)
- #2724 PCI 16/4Mbps Token-Ring IOA
- #2838 PCI 100/10Mbps Ethernet IOA
- #9723 Base PCI Ethernet IOA (support only)
- #9724 Base PCI Token-Ring IOA (support only)
- #9738 Base PCI 100/10Mbps Ethernet
Note: If #2838 or #9738 is selected, then #0222 (100/10Mbps Ethernet on IPCS)
is required for each #2838/#9738 selected to attach to the #2854.
If running NT operating system on #2854, then;
- #0325 (IPCS Extension Cable for NT) is required
- A minimum of 64MB is required
- #1700 (IPCS Keyboard/Mouse for NT) is default (in those countries
offering it)
- A display must be connected to the IPCS to support NT.
- For supported keyboard/mouse and display types, see
http://www.as400.ib
If running OS/2 operating system on #2854,
then #0325, #1700, and a display are not allowed.
If running Novell NetWare on the #2854, a
maximum of 256MB IOP memory is supported.
PCI card slots required: None. Reserved
positions exist in the base system unit and in the #9329 PCI Integrated
Expansion Unit for the two cards used by this feature.
Maximums: One in the base system unit and one
in the #9329 PCI Integrated Expansion Unit.
(#2865) PCI Integrated Netfinity Server
(For IBM US, No Longer Available as of July 2,
2002)
Contains a 333MHz Pentium II processor, four
main storage slots, and two LAN IOA slots. This adapter requires two reserved
PCI card positions, one for the processor card and the second for a bridge card
to interface the processor to the system.
Each memory card slot can contain either a
32MB memory card, a 128MB memory card or a 256MB memory card producing a total
memory capacity ranging from 32MB to 1000MB (1GB). At least one memory card is
required. The feature numbers for the memory cards are as follows:
- #2861 32MB IOP Memory
- #2862 128MB IOP Memory
- #2867 256MB IOP Memory
Each LAN IOA slot can contain a PCI Token-Ring
IOA, a PCI Ethernet IOA, or the PCI 100/10Mbps Ethernet IOA. The PCI Integrated
Netfinity Server is capable of supporting two IOAs in any combination with a
maximum of one 100/10Mbps Ethernet. At least one LAN IOA feature is required.
The features for the LAN IOAs are as follows:
- #2723 PCI Ethernet IOA (support only)
- #2724 PCI 16/4Mbps Token-Ring IOA
- #2838 PCI 100/10Mbps Ethernet IOA
- #9723 Base PCI Ethernet IOA (support only)
- #9724 Base PCI Token-Ring IOA (support only)
- #9738 Base PCI 100/10Mbps Ethernet (support only)
Note: If #2838 or #9738 is selected, then #0222 (100/10Mbps Ethernet on IPCS)
is required for each #2838/#9738 selected to attach to the #2865.
If running NT operating system on #2865, then;
- #0325 (IPCS Extension Cable for NT) is required
- A minimum of 64MB is required
- #1700 (IPCS Keyboard/Mouse for NT) is default (in those countries
offering it)
- A display must be connected to the server to support NT.
- For supported keyboard/mouse and display types, see
http://www.as400.ibm.com/nt
If running OS/2 operating system on #2865:
- #0325, #1700, or a display are not allowed
- A maximum of 512MB of IOP memory is supported.
If running Novell NetWare on the #2865, a
maximum of 256MB IOP memory is supported.
PCI card slots required: None. Reserved
positions exist in the base system unit and in the #9329 PCI Integrated
Expansion Unit for the two card used by this feature. Maximum: One in the base
system unit and one in the #9329 PCI Integrated Expansion Unit.
OS/400 V4R2 with cum package C8349420, or
later, or V4R3 with cum package C8349430, or later, is required.
(#65XX) FSIOPs
Upgrades can be made to installed FSIOPs with
the following features:
(#6520) Upgrade 1 to 2-Port FSIOP
#6520 is used when upgrading a one-port FSIOP
to a two-port FSIOP. It is available for the following features, supported by
migration only: #6516, #6517, #6518, #6519, #8716, #8717, #8718, and #8719,
Installation of #6520 requires disassembly of the FSIOP and removal of the one-port
FSIOP card.
One cable is allowed when ordering a #6520.
- #9024 Token-Ring Cable (2.44-meter)
(For IBM US, No Longer Available as of March 31, 1999)
- #9025 Ethernet Cable (3-meter AUI)
(#6509) Additional 16MB FSIOP Memory
(For IBM US, No Longer Available as of August
31, 1998)
#6509 is a 16MB memory module used for
expanding FSIOP memory to a maximum of 64MB. It can be used on features #6516,
#6517, #6518, #6526, #6527, #6528, #8716, #8717, #8718, #8726, #8727, and
#8728.
See the description for features #5072 and
#5073 under Expansion Features, for restrictions due to +12V power limitations.
(#6616) Integrated PC Server for AS/400
(For IBM US, No Longer Available as of March
31, 1999)
The Integrated PC Server (#6616) is the next
step in the evolution of the IBM's File Serving IOP family. It contains a
166MHz Pentium processor, two main storage slots, and two LAN IOA slots.
Each memory card slot can contain either a
32MB memory card or a 128MB memory card producing a total memory capacity ranging
from 32MB to 256MB. At least one memory card is required. The feature numbers
for the memory cards are as follows:
- #2861 32MB IOP Memory
- #2862 128MB IOP Memory
Each LAN IOA slot can contain either a
Token-Ring IOA or an Ethernet IOA. The Integrated PC Server is capable of
supporting both IOAs in any combination. At least one LAN IOA feature is
required. The following are the LAN IOA features:
- #6149 16/4Mbps Token-Ring IOA (support only)
- #6181 Ethernet/IEEE 802.3 IOA (support only)
- #9249 Base 16/4Mbps Token-Ring IOA (servers only) (support only)
- #9381 Base Ethernet/IEEE 802.3 IOA (servers only) (support only)
Feature #6616 requires two IOP slots.
(#6617) Integrated PC Server for AS/400
(For IBM US, No Longer Available as of May 31,
1999)
Contains a 200MHz Pentium Pro processor, four
main storage slots, and three LAN IOA slots.
Each memory card slot can contain either a
32MB memory card or a 128MB memory card producing a total memory capacity
ranging from 32MB to 512MB. At least one memory card is required. The feature
numbers for the memory cards are as follows:
- #2861 32MB IOP Memory
- #2862 128MB IOP Memory
Each LAN IOA slot can contain a PCI Token-Ring
IOA, a PCI Ethernet IOA or the PCI 100/10Mbps Ethernet IOA. The Integrated PC
Server can support all three IOAs in any combination. At least one LAN IOA
feature is required. Max of two 100/10Mbps Ethernet IOAs. The features for the
LAN IOAs are as follows:
- #2723 PCI Ethernet IOA (support only)
- #2724 PCI 16/4Mbps Token-Ring IOA
- #2838 PCI 100/10Mbps Ethernet IOA
- #9723 Base PCI Ethernet IOA (support only)
- #9724 Base PCI Token-Ring IOA (support only)
- #9738 Base PCI 100/10Mbps Ethernet (support only)
Note: If #2838 or #9738 is selected, then #0222 (100/10 Mbps Ethernet on IPCS)
is required for each #2838/#9738 selected to attach to the #6617.
#6617 requires three IOP slots. #6617 cannot
be placed in #5044 (System Unit Expansion Rack).
If running NT operating system on #6617, then;
- #0325 (IPCS Extension Cable for NT) is required.
- A minimum of 64MB is required.
- #1700 (IPCS Keyboard/Mouse for NT) is default (in those countries
offering it).
- A display must be connected to the IPCS to support NT.
- For supported keyboard/mouse and display types, see
http://www.as400.ibm.com/nt
- All three PCI slots can be used for Integrated PC Server functions.
Two slots can support native AS/400 functions.
Maximum: One 100/10Mbps Ethernet IOA in the two native AS/400 slots (two total).
If running OS/2 operating system on #6617,
then;
· #0325 and #1700 and display are not allowed.
- Only two PCI slots can be used for Integrated PC Server functions.
Both support native AS/400 functions. Max of one 100/10Mbps Ethernet IOA
in the two native AS/400 slots.
If running Novell NetWare on the #6617, a
maximum of 256MB IOP memory is supported.
Maximum: 16. The maximum may be limited when
used in combination with other LAN IOPs.
(#6618) Integrated Netfinity Server for AS/400
(For IBM US, No Longer Available as of
December 28, 2001)
The Integrated Netfinity Server (#6618) contains
a 333MHz Pentium II processor, four main storage slots, and three LAN IOA
slots.
Each memory card slot can contain either a
32MB memory card, a 128MB memory card, or a 256MB memory card producing a total
memory capacity ranging from 32MB to 1GB. At least one memory card is required.
The feature numbers for the memory cards are as follows:
- #2861 32MB IOP Memory
- #2862 128MB IOP Memory
- #2867 256MB IOP Memory
Each LAN IOA slot can contain a PCI Token-Ring
IOA, a PCI Ethernet IOA, or the PCI 100/10Mbps Ethernet IOA. The Integrated
Netfinity Server can support all three IOAs in any combination, with a maximum
of two #2838/#9738. At least one LAN IOA feature is required. The features for
the LAN IOAs are as follows:
- #2723 PCI Ethernet IOA (support only)
- #2724 PCI 16/4Mbps Token-Ring IOA
- #2838 PCI 100/10Mbps Ethernet IOA
- #9723 Base PCI Ethernet IOA (support only)
- #9724 Base PCI Token-Ring IOA (support only)
- #9738 Base PCI 100/10Mbps Ethernet (support only)
Note: If #2838 or #9738 is selected, then #0222 (100/10Mbps Ethernet on IPCS)
is required for each #2838/#9738 selected to attach to the #6618.
All three PCI slots can be used for Netfinity
server functions. Two of the three PCI slots can support native AS/400
functions.
#6618 requires three IOP slots. #6618 cannot
be placed in #5044 (System Unit Expansion Rack).
If running NT operating system on #6618, then;
- #0325 (IPCS Extension Cable for NT) is required
- A minimum of 64MB IOP memory is required
- #1700 (IPCS Keyboard/Mouse for NT) is default (in those countries
offering it).
- A display must be connected to the IPCS to support NT.
- For supported keyboard/mouse and display types, see
http://www.as400.ibm.com/nt
- All three PCI slots can be used for Netfinity server functions. Two
slots can support native AS/400 functions. Maximum: One 100/10Mbps
Ethernet IOA in the two native AS/400 slots (two total).
If running OS/2 operating system on #6618,
then;
- #0325 and #1700 and display are not allowed.
- Only two PCI slots can be used for Netfinity server functions. Both
support native AS/400 functions. Maximum: One 100/10Mbps Ethernet IOA in
the two native AS/400 slots.
- A maximum of 512MB of IOP memory is supported.
If running Novell NetWare on the #6618, a
maximum of 256MB IOP memory is supported.
Maximum: 16. The maximum may be limited when
used in combination with other LAN IOPs.
OS/400 V4R2 with cum package C8349420, or
later, or V4R3 with cum package C8349430, or later, is required.
PCI Based LAN Features
(#2838) PCI 100/10Mbps Ethernet IOA
(For IBM US, No Longer Available as of
November 21, 2003)
(#9738) PCI 100/10Mbps Ethernet IOA (support only)
(For IBM US, No Longer Available as of July 2,
2002)
The 100 Base-X Ethernet PCI Adapter feature
will allow the AS/400 to attach to standardized 100Mbps high speed Ethernet
LANs and also allow attachment to existing 10Mbps Ethernet LANs. The adapter
comes standard with an RJ45 connector for attachment to UTP-5 media. This
adapter requires OS/400 V4R1, or later. #9738 is a base LAN option on the
server models and is available as a priced feature on all models as #2838.
For each #2838 adapter used on an IPCS, a
separate no-charge #0222 specify code is required.
Prerequisites: Model S10: High-speed PCI slot,
or #6617 (Integrated PC Server). Model S20: High-speed PCI slot, #2810 (LAN/WAN
IOP), or #6617. Model S30: #2810 or #6617.
(#2723) PCI Ethernet IOA
(For IBM US, No Longer Available as of
December 28, 2001)
(#9723) PCI Ethernet IOA
(For IBM US, No Longer Available as of July 2,
2002)
The PCI Ethernet IOA provides single
attachment to one Carrier Sense Multiple Access/Collision Detect Local Area
Network. An adapter card and internal code supply Ethernet Version 2 and IEEE
802.3 Media Access Control (MAC) plus IEEE 802.2 Logical Link Control (LLC)
functions. The Ethernet/IEEE 802.3 IOA can operate in half-or full-duplex mode.
#2723 and #9723 each have an RJ45 connector
for attachment of customer-supplied cabling and a 15 pin D-Shell as an
alternative for attachment of an IBM AUI cable. RJ45 twisted-pair cable must be
ordered separately. The following cable can be ordered if the customer is
choosing IBM AUI cabling:
· #9025 Ethernet Cable (3 meter AUI)
Note: This cable can be ordered without an adapter for customers who must change their cable on an installed system.
#9723 is a base LAN. #2723 is an optional
feature LAN.
Prerequisites: #2854 or #6617 (Integrated PC
Servers). OS/400 V4R2. I/O Card Slots Used: None. High-speed PCI, or IPCS slots
used: One.
(#2724) PCI 16/4Mbps Token-Ring IOA
(#9724) PCI 16/4Mbps Token-Ring IOA
(For IBM US, No Longer Available as of July 2,
2002)
The PCI 16/4Mbps Token-Ring IOA provides a
single attachment to either a 16 Mbps or a 4 Mbps IBM Token-Ring Network. An
IOA card and internal code supply IEEE 802.5 MAC and IEEE 802.2 LLC functions.
The 16/4 Token-Ring IOA can operate in half-or full-duplex mode.
#2724 and #9724 each come standard with a
2.44-meter (8-foot) token-ring cable. Alternatively, you can attach a
separately purchased twisted-pair cable to the RJ45 connection on the IOA. The
standard IBM Cabling System patch cables can increase the length where
necessary.
#9724 is a base LAN. #2724 is an optional
feature LAN.
Prerequisites: #6617 (Integrated PC Server).
OS/400 V4R2. I/O Card Slots Used: None. High-speed PCI, or IPCS slots used:
One.
Asynchronous Transfer Mode (ATM) Features
(#2811) PCI 25Mbps UTP ATM
(For IBM US, No Longer Available as of May 31,
1999)
#2811 is a 25Mbps ATM PCI card that allows the
AS/400 to be attached into an ATM network using Unshielded Twisted Pair (UTP)
cabling. #2811 is a good choice if you want the benefits from the scheduling,
low- latency, and wide inter-connectivity of ATM, but do not require bit rates
higher than 25Mbps. In addition, many buildings are already wired with UTP category
3 cabling. #2811 will typically be used where 25 Mbps speeds are required over
distances of less than 100 meters.
Prerequisites: Feature #2810 (LAN/WAN IOP) on
Models S30 and S40, and Model S20 when using an I/O tower, or #9331 (Expansion
Unit for SPD Cards), or, a high-speed slot in a PCI adapter on Model S10 and
S20 system units, or Model S20 PCI Expansion Units (#9329). OS/400 V4R2, or
later, is required.
(#2812) PCI 45Mbps Coax T3/DS3 ATM
(For IBM US, No Longer Available as of May 31,
1999)
#2812 is a 45Mbps ATM PCI card that allows the
AS/400 to be attached into an ATM network using coax cabling and the T3/DS-3
interface. #2812 is a good choice if you want more performance than available
on the 25Mbps ATM but do not require the 155Mbps performance level. #2812 also
has lower initial connection cost and lower ongoing tariffs. #2812 will
typically be used where 45Mbps speeds are required over distances of less than
137 meters. This feature may not be available in all countries.
Prerequisites: Feature #2810 (LAN/WAN IOP) on
Models S30 and S40, and Model S20 when using an I/O tower, or #9331 (Expansion
Unit for SPD Cards), or, a high-speed slot in a PCI adapter on Model S10 and
S20 system units, or Model S20 PCI Expansion Units (#9329). OS/400 V4R2, or
later, is required.
(#2815) PCI 155Mbps UTP OC3 ATM
(For IBM US, No Longer Available as of May 31,
2001)
#2815 is a 155Mbps ATM PCI card that allows
the AS/400 to be attached into an ATM network using the UTP-5 interface. This
interface is intended for connection to local area switches and direct
connection to service provider equipment. #2815 will typically be used where
155Mbps speeds are required over distances of less than 100 meters.
Prerequisites: Feature #2810 (LAN/WAN IOP) on
Models S30 and S40, and Model S20 when using an I/O tower, or #9331 (Expansion
Unit for SPD Cards), or, a high-speed slot in a PCI adapter on Model S10 and
S20 system units, or Model S20 PCI Expansion Units (#9329). OS/400 V4R2, or
later, is required.
(#2816) PCI 155Mbps MMF ATM
(For IBM US, No Longer Available as of
December 28, 2001)
#2816 is a 155Mbps ATM PCI card that allows
the AS/400 to be attached into an ATM network using the Multi-Mode Fiber (MMF)
62.5-micron interface. This interface is intended for connection to both local
area switches and direct connection to service provider equipment. #2815 will
typically be used where 155Mbps speeds are required over distances of less than
2 km.
Prerequisites: Feature #2810 (LAN/WAN IOP) on
Models S30 and S40, and Model S20 when using an I/O tower, or #9331 (Expansion
Unit for SPD Cards), or, a high-speed slot in a PCI adapter on Model S10 and
S20 system units, or Model S20 PCI Expansion Units (#9329). OS/400 V4R2, or
later, is required.
(#2818) PCI 155Mbps SMF OC3 ATM
(For IBM US, No Longer Available as of May 31,
2001)
#2818 is a 155Mbps ATM PCI card that allows
the AS/400 to be attached into an ATM network using the Single-Mode Fiber (SMF)
9-micron interface. This interface is intended primarily for direct connection to
service provider equipment but can be used for local area switches. #2818 will
typically be used where 155Mbps speeds are required over distances of from 16
km to 40 km.
Prerequisites: Feature #2810 (LAN/WAN IOP) on
Models S30 and S40, and Model S20 when using an I/O tower, or #9331 (Expansion
Unit for SPD Cards), or, a high-speed slot in a PCI adapter on Model S10 and
S20 system units, or Model S20 PCI Expansion Units (#9329). OS/400 V4R2, or
later, is required.
(#2819) PCI 34Mbps Coax E3 ATM
(No Longer Available as of May 31, 1999)
#2819 is a 34Mbps ATM PCI card that allows the
AS/400 to be attached into an ATM network using coax cabling and the E3
interface. #2819 is a good choice if you want more performance than available
on the 25Mbps ATM but don't require the 155Mbps performance level. #2819 also
has lower initial connection cost and lower ongoing tariffs. #2819 is typically
used where 34Mbps speeds are required over distances of less than 137 meters.
This feature may not be available in all countries.
Prerequisites: Feature #2810 (LAN/WAN IOP) on
Models S30 and S40, and Model S20 when using an I/O tower, or #9331 (Expansion
Unit for SPD Cards), or, a high-speed slot in a PCI adapter on Model S10 and
S20 system units, or Model S20 PCI Expansion Units (#9329). OS/400 V4R2, or
later, is required.
Multi-Function Controllers
(#2623) Six-Line Communications Controller
(For IBM US, No Longer Available as of March
31, 1999)
The Six-Line Communications Controller (#2623)
provides attachment for a wide range of AS/400 communications adapters. With
the announcement of V4R1 #2623 is being replaced by #2629 for all functions
with the exception of ISDN (#2605). #2623 will continue to support all past
functions; however, #2623 will only be orderable for customers wishing to
purchase the ISDN adapter.
The Six-line Communications Controller
provides for the attachment of the following communications adapters:
- #2605 ISDN Basic Rate Interface Adapter (support only)
- #2609 EIA 232/V.24 Two-Line Adapter (support only)
- #2610 X.21 Two-Line Adapter (support only)
- #2612 EIA 232/V.24 One-Line Adapter (support only)
- #2613 V.35 One-Line Adapter (support only)
- #2614 X.21 One-Line Adapter (support only)
- #2654 EIA 232/V.24 Two-Line 20E
- #2655 EIA 232/V.24 Two-Line 20
- #2656 X.21 Two-Line 20
- #2657 EIA 232/V.24 Two-Line 50E
- #2658 EIA 232/V.24 Two-Line 50
- #2659 X.21 Two-Line 50
- #6153 V.35 One-Line Adapter 20-Ft Cable
- #6173 V.35 One-Line Adapter 50-Ft Cable
One #2623 will support one of the following
combinations of adapters:
- Two ISDN adapters
- Up to three EIA 232/V.24, X.21 and V.35 adapters in any combination
(see exception for V.35 below)
V.35 Limitations:
The Six-Line Communications Controller (#2623)
supports up to three V.35 SDLC data lines for attachment to T1/E1/J1 facilities
through appropriate data communications equipment (DCE).
Per controller (#2623) supports:
- One V.35 SDLC data line operating at speeds up to 640 Kbps.
- Two V.35 SDLC data lines operating at speeds up to 512 Kbps.
- Three V.35 SDLC data lines operating at speeds up to 384 Kbps.
- no other adapters are allowed on #2623 when running T1/E1/J1.
(#2629) LAN/WAN/Workstation IOP
Supports attachment of three IOAs.
- #2699 (Communications) (support only)
- #6149 (LAN) (support only)
- #6181 (LAN) (support only)
- #9249 (LAN) (support only)
- #9381 (LAN) (support only)
- #6180 (Twinaxial) (support only)
- #9280 (Twinaxial) (support only)
One #2629 will support one of the following
combinations of adapters:
- Three of any combination of communications or twinaxial IOAs
- Two LAN IOAs and one other IOA
- One LAN IOA and two other IOAs
No more than seven #2629s can be placed into
each System Unit Expansion Tower (#5072). #2629 is not allowed in slot 14 of
tower #5072. The #2629 is not restricted when used in the System Unit Expansion
Tower (#5073).
(#9751) MFIOP with RAID
#9751 contains the function for controlling 20
disk units, one tape unit and one CD-ROM unit. #9751 also supports three of the
following LAN, twinaxial workstations, or communications controllers:
- #2699 (Communications) (support only)
- #6149 (LAN) (support only)
- #6181 (LAN) (support only)
- #9249 (LAN) (support only)
- #9381 (LAN) (support only)
- #6180 (Twinaxial) (support only)
- #9280 (Twinaxial) (support only)
OS/400 V4R1 is required. For a discussion of
how the #9751 controls disk and tape units see Disk, Tape, CD-ROM, and Diskette
Unit IOP Features.
PCI-Based Multi-Function IOPs
Base Multifunction IOP
The base system contains an MFIOP. This MFIOP
provides support for three PCI card slots, one high-speed PCI card slot used
for the base system disk controller, and also drives one integrated PC server.
The MFIOP supports the following IOAs in its high-speed PCI slot C11:
- #2726 PCI Disk Unit Controller (support only)
- #9728 Base PCI Disk Unit Controller (support only)
The MFIOP supports one of the two base PCI
cards in its low-speed PCI slot C09.
- #9720 PCI WAN/Twinaxial IOA (support only)
- #9721 PCI Two-Line WAN IOA (support only)
The MFIOP supports the following IOAs in its
two other low-speed PCI slots C08 and C10.
- #2720 PCI WAN/Twinaxial IOA (servers only)
- #2721 PCI Two-Line WAN IOA (support only)
- #2722 Twinaxial Workstation IOA
- #2723 PCI Ethernet IOA (support only)
- #2724 PCI 16/4Mbps Token-Ring IOA
- #9723 PCI Ethernet IOA (support only)
- #9724 PCI 16/4Mbps Token-Ring IOA (servers only) (support only)
The MFIOP will support one of the following
combinations of adapters: in slots C08 and C10.
- One or two non-LAN IOAs in any combination
- One LAN IOA and one other card
(#2809) PCI LAN/WAN/Workstation IOP
(For IBM US, No Longer Available as of May 31,
2001)
The PCI LAN/WAN/Workstation IOP can be used
for attaching LAN, WAN, and workstation IOAs to the system. The following
features can be attached:
- #2726 PCI Disk Unit Controller (support only)
- #2729 PCI Magnetic Media Controller (support only)
- #2838/#9738 PCI 100/10Mbps Ethernet IOA
- #2721 PCI Two-Line WAN IOA (support only)
- #2722 Twinaxial Workstation IOA
- #2723 PCI Ethernet IOA (support only)
- #2724 PCI 16/4Mbps Token-Ring IOA
The #2809 can support different combinations
of the above features, depending upon which of three system and #5064 System
Unit Expansion positions the IOP is installed in. The configurator will select
the optimal configuration based on the features selected.
Controller PCI card position required: One.
Maximums: One in the base system unit, three in the #9329 PCI Integrated
Expansion Unit.
Communications
(#2605) ISDN Basic Rate Interface Adapter
(For IBM US, No Longer Available as of March
31, 1999)
This feature consists of an adapter and one
20-foot cable used to attach one communications line to an ISDN network. The
ISDN Basic Rate Interface supported by #2605 contains two high-speed ISDN user
channels. #2605 counts as two 64Kbps lines when calculating the system line
limits.
Prerequisite: #2623 - Six-Line Communications
Controller. This feature code may have country specific usage.
(#2609) EIA 232/V.24 Two-Line Adapter
(For IBM US, No Longer Available as of March
31, 1999)
The configurator will allow #2609 to be added
on the extra controllers screen if the prerequisite #2623 is already installed.
The preferred adapter for EIA 232/V.24 is the Multiple Protocol Communications
IOA (#2699).
Feature #2609 consists of an adapter used to
attach two communication lines using ASYNC, BSC, SDLC, or X.25 protocols and a
CYGNET fanout cable.
Specify two of the following in any
combination.
· #9022 RS-232 Cable 20-Ft - For use with a modem eliminator or a modem that has a feature known as "signal quality detect."
- #9023 V.24 Cable 20-Ft Enhanced - For use with modems that
implement CCITT V.54 loop 2 and loop 3 tests on interface pins 21 and 18.
- #9836 RS-232 Cable 50-Ft - For use with a modem eliminator or a
modem that has a feature known as "signal quality detect."
- #9835 V.24 Cable 50-Ft Enhanced - For use with modems that
implement CCITT V.54 loop 2 and loop 3 tests on interface pins 21 and 18.
See the description for features #5072 and
#5073 in Expansion Features, for restrictions due to +12V power limitations.
(#2610) X.21 Two-Line Adapter
(For IBM US, No Longer Available as of March
31, 1999)
#2610 and its cables are not recommended
for use with OS/400 V4R1. The recommended adapter for X.21 is the Multiple
Protocol Communications IOA (#2699). The configurator will allow #2610 to be
added on the extra controllers screen if the prerequisite #2623 is already
installed.
This feature consists of an adapter used to
attach two communication lines to an X.21 or X.25 network and a CYGNET fanout
cable.
Specify two of the following in any
combination.
- #9021 X.21 Cable 20-Ft
(For IBM US, No Longer Available as of March 31, 1999)
- #9839 X.21 Cable 50-Ft
(For IBM US, No Longer Available as of March 31, 1999)
(#2612) EIA 232/V.24 One Line Adapter
(For IBM US, No Longer Available as of March
31, 1999)
The configurator will allow #2612 to be added
on the extra controllers screen if the prerequisite #2623 is already installed.
The preferred adapter for EIA 232/V.24 is the Multiple Protocol Communications
IOA (#2699).
Feature #2612 consists of an adapter used to
attach one communication line using ASYNC, BSC, SDLC, or X.25 protocols.
Specify one of the following:
· #9022 RS-232 Cable 20-Ft - For use with a modem eliminator or a modem that has a feature known as "signal quality detect."
- #9023 V.24 Cable 20-Ft Enhanced - For use with modems that
implement CCITT V.54 loop 2 and loop 3 tests on interface pins 21 and 18.
- #9836 RS-232 Cable 50-Ft - For use with a modem eliminator or a
modem that has a feature known as "signal quality detect."
- #9835 V.24 Cable 50-Ft Enhanced - For use with modems that
implement CCITT V.54 loop 2 and loop 3 tests on interface pins 21 and 18.
(#2613) V.35 One-Line Adapter
(For IBM US, No Longer Available as of March
31, 1999)
#2613 and its cables are not recommended
for use with OS/400 V4R1. The recommended adapter for V.35 is the Multiple
Protocol Communications IOA (#2699). The configurator will allow #2613 to be
added on the extra controllers screen if the prerequisite #2623 is already
installed.
This feature consists of an adapter used to
support one V.35 Communication line using either BSC, SDLC, or X.25 protocols.
Specify one of the following:
- #9020 V.35 Cable 20-Ft
(For IBM US, No Longer Available as of March 31, 1999)
- #9838 V.35 Cable 50-Ft
(For IBM US, No Longer Available as of March 31, 1999)
(#2614) X.21 One-Line Adapter
(For IBM US, No Longer Available as of March
31, 1999)
#2614 and its cables are not recommended
for use with OS/400 V4R1. The recommended adapter for X.21 is the Multiple
Protocol Communications IOA (#2699). The configurator will allow #2614 to be
added on the extra controllers screen if the prerequisite #2623 is already
installed.
This feature consists of an adapter used to
attach one communication line to an X.21 or X.25 network.
Specify one of the following:
- #9021 X.21 Cable 20-Ft
(For IBM US, No Longer Available as of March 31, 1999)
- #9839 X.21 Cable 50-Ft
(For IBM US, No Longer Available as of March 31, 1999)
(#2699) Two-Line WAN IOA
(For IBM US, No Longer Available as of
December 28, 2001)
#2699 supports up to two multiple protocol
communications ports when one or two (in any combination) of the following
cables are attached.
- #0329 V.24/EIA232 80-Ft Cable
- #0330 V.24/EIA232 20-Ft Cable
- #0331 V.24/EIA232 50-Ft Cable
- #0334 V.24/EIA232 80-Ft Enh Cable
- #0335 V.36/EIA449 20-Ft Cable
- #0336 V.36/EIA449 50-Ft Cable
- #0337 V.36/EIA449 150-Ft Cable
- #0338 V.35 20-Ft Cable
- #0339 V.35 50-Ft Cable
- #0340 V.35 80-Ft Cable
- #0341 X.21 20-Ft Cable
- #0342 X.21 50-Ft Cable
#2699 Requires an unused IOA slot on a #2629
or #9751 as a prerequisite. #2699 can be ordered with either one or two cables.
(#9699) Base MultipleProtocol Communications Adapter
(For IBM US, No Longer Available as of
December 28, 2001)
#9699 is the base communications adapter and
supports up to two multiple protocol communications ports when one or two
communications cables are attached. At least one #0329, #0330, or #0331 cable
(to support ECS) must be attached and one additional cable from the following
list may also be attached.
- #0329 V.24/EIA232 80-Ft Cable
- #0330 V.24/EIA232 20-Ft Cable
- #0331 V.24/EIA232 50-Ft Cable
- #0334 V.24/EIA232 80-Ft Enh Cable
- #0335 V.36/EIA449 20-Ft Cable
- #0336 V.36/EIA449 50-Ft Cable
- #0337 V.36/EIA449 150-Ft Cable
- #0338 V.35 20-Ft Cable
- #0339 V.35 50-Ft Cable
- #0340 V.35 80-Ft Cable
- #0341 X.21 20-Ft Cable
- #0342 X.21 50-Ft Cable
Select the following cable for Client Access
Console.
- #0344 20-Ft Comm Console Cable
Select the following cable for Operations
Console.
- #0328 Operations Console Cable
PCI Based Communications Adapters
(#2720) PCI WAN/Twinaxial IOA
(For IBM US, No Longer Available as of July 2,
2002)
This combined twinaxial/communication adapter
available on the S10 and S20 systems supports a single communication line.
#2720 supports a multiple protocol communications port based on which of the
cables below are attached. This adapter also supports twinaxial workstations.
See description of the adapter in the workstation controller section of this
document.
One of the following cables is required for
communications support. None is required if this adapter is only being used for
twinaxial support.
- #0348 V.24/EIA232 20-Ft PCI Cable
- #0349 V.24/EIA232 50-Ft PCI Cable
- #0353 V.35 20-Ft PCI Cable
- #0354 V.35 50-Ft PCI Cable
- #0355 V.35 80-Ft PCI Cable
- #0356 V.36 20-Ft PCI Cable
- #0357 V.36 50-Ft PCI Cable
- #0358 V.36 150-Ft PCI Cable
- #0359 X.21 20-Ft PCI Cable
- #0360 X.21 50-Ft PCI Cable
- #0365 V.24/EIA232 80-Ft PCI Cable
PCI slots required: One. Maximum: One.
(#2721) PCI Two-Line WAN IOA:
(For IBM US, No Longer Available as of October
31, 2000)
#2721 supports up to two multiple protocol
communications ports when one or two (in any combination) of the following
cables are attached.
- #0348 V.24/EIA232 20-Ft PCI Cable
- #0349 V.24/EIA232 50-Ft PCI Cable
- #0353 V.35 20-Ft PCI Cable
- #0354 V.35 50-Ft PCI Cable
- #0355 V.35 80-Ft PCI Cable
- #0356 V.36 20-Ft PCI Cable
- #0357 V.36 50-Ft PCI Cable
- #0358 V.36 150-Ft PCI Cable
- #0359 X.21 20-Ft PCI Cable
- #0360 X.21 50-Ft PCI Cable
- #0365 V.24/EIA232 80-Ft PCI Cable
#2721 can be ordered with either one or two
cables. PCI card slots required: One.
(#2745) PCI Two Line WAN IOA
#2745 supports up to two multiple protocol
communications ports when one or two (in any combination) of the following
cables are attached.
- #0348 V.24/EIA232 20-Ft PCI Cable
- #0349 V.24/EIA232 50-Ft PCI Cable
- #0365 V.24/EIA232 80-Ft PCI Cable
- #0350 V.24/EIA232 20-Ft Enh PCI Cable
- #0351 V.24/EIA232 50-Ft Enh PCI Cable
- #0352 V.24/EIA232 80-Ft Enh PCI Cable
- #0353 V.35 20-Ft PCI Cable
- #0354 V.35 50-Ft PCI Cable
- #0355 V.35 80-Ft PCI Cable
- #0356 V.36 20-Ft PCI Cable
- #0357 V.36 50-Ft PCI Cable
- #0358 V.36 150-Ft PCI Cable
- #0359 X.21 20-Ft PCI Cable
- #0360 X.21 50-Ft PCI Cable
(#2750) PCI ISDN BRI U IOA
(For IBM US, No Longer Available as of
November 20, 2001)
#2750 is a 4-port (8-channel) ISDN BRI (basic
rate interface) PCI card. Based on DSP technology, #2750 allows connections to
modems connected to the telephone network with analog lines and ISDN devices.
Each port consists of 2B+D configuration. #2750 is the U-bus (2-wire) version
IOA.
A wrap cable/plug and four 30-ft RJ-45 to
RJ-45 network cables are shipped with each card.
Protocols supported:
- SLIP/PPP (connected to remote ISDN devices, synchronous or
asynchronous modems)
- IDLC (connected to remote ISDN devices)
- Refer to the Product Preview in Hardware Announcement 199-191,
dated August 3, 1999, regarding support for remotely attached Fax
machines.
Prerequisites: Storage/PCI Expansion Tower
(#5065) on Models S20, S30, and S40, or one PCI slot and PCI LAN/WAN
Workstation IOA (#2824) on Models S10 and S20, or, the base PCI Integrated
Expansion Unit (#9330) on Model S20.
OS/400 V4R4 with PTF MF22631, or Cumulative
(cum) PTF package C9313440, or later. #2750 requires country
certification/homologation.
(#2751) PCI ISDN BRI S/T IOA
(For IBM US, No Longer Available as of
November 20, 2001)
#2751 is a 4-port (8-channel) ISDN BRI (basic
rate interface) PCI card. Based on technology, #2751 allows connections to
modems connected to the telephone network with analog lines and ISDN devices.
Each port consists of 2B+D configuration. #2751 is the S/T-bus (4-wire) version
IOA.
A wrap cable/plug and four 30-ft RJ-45 to
RJ-45 network cables are shipped with each card.
Protocols supported:
- SLIP/PPP (connected to remote ISDN devices, synchronous or
asynchronous modems)
- IDLC (connected to remote ISDN devices)
- Refer to the Product Preview in Hardware Announcement 199-191,
dated August 3, 1999, regarding support for remotely attached Fax
machines.
Prerequisites: Storage/PCI Expansion Tower
(#5065) on Models S20, S30, and S40, or one PCI slot and PCI LAN/WAN
Workstation IOA (#2824) on Models S10 and S20, or, the base PCI Integrated
Expansion Unit (#9330) on Model S20.
OS/400 V4R4 with PTF MF22631, or Cumulative
(cum) PTF package C9313440, or later. #2751 requires country
certification/homologation.
(#2761) PCI Integrated Analog Modem
(For IBM US, No Longer Available as of July 2,
2002)
Based on the latest DSP technology, #2761
allows the modem function to be integrated into the IOA and supports multiple
analog modem ports (8-phone lines). #2761 will run the following protocols
without an external modem:
- SLIP/PPP
- SDLC
- Fax
A wrap cable/plug and eight 30-ft phone cables
are shipped with each #2761. An ASYNC line description is required for fax, and
can only be used for fax.
Prerequisites: Storage/PCI Expansion Tower
(#5065) on Models S20, S30, and S40, or one PCI slot and PCI LAN/WAN
Workstation IOA (#2824) on Models S10 and S20, or, the base PCI Integrated
Expansion Unit (#9330) on Model S20.
OS/400 V4R4 with PTF MF22631, or Cumulative
(cum) PTF package C9313440, or later. #2761 requires country
certification/homologation.
Guidance for Choosing Between Features
#2750, #2751, or #2761
Features #2750, #2751 and #2761 provide
similar functions. Each provides eight connections to remote devices. TCP/IP
PPP and SLIP protocols are supported over all three features. The following are
guidelines for selecting which of the adapters should be used.
#2750/#2751 PCI ISDN BRI IOA Adapters
- Should be used if ISDN digital lines are available
- Can connect with remote ISDN devices at data transfer rates of
64Kbps
- Can connect with remote non-ISDN modems (such as a laptop PC with a
modem) at data transfer rates up to 56Kbps using the V.90 modem protocol.
These remote modems can be connected to the telephone network with analog
phone lines. Connections to slower speed modems (such as V.34 33.6Kbps
modems) are also supported.
- Digital lines provide better signal quality than analog lines. Data
is sent in fewer transmission attempts, which reduce the overall time
needed to complete the data transfer.
- IDLC (ISDN SNA protocol) is supported.
- PCI ISDN BRI S/T IOA (#2751) should be chosen when the phone
service is the four-wire S/T interface. It supports the passive bus
configuration which allows simultaneous use of a connection for voice and
data transfer.
- PCI ISDN BRI U IOA (#2750) should be chosen when the phone service
is the two-wire U interface.
#2761 PCI Integrated Analog Modem
- Should be used if ISDN digital lines are not available and analog
lines must be used.
- Analog line connections provide data transfer rates of up to
33.6Kbps to a remote analog device (such as a laptop PC with a modem).
- SDLC (SNA) protocol is supported
- Fax is supported
Refer to the Product Preview, in Hardware
Announcement 199-191, dated August 3, 1999, for information on fax support for
features #2750 and #2751.
(#2824) PCI LAN/WAN/Workstation IOP
(For IBM US, No Longer Available as of
November 21, 2003)
#2824 is an I/O processor with 32MB of memory.
The following PCI communication adapters are
supported:
- #2721 PCI Two-Line WAN IOA (support only)
- #2722 PCI Twinaxial Workstation IOA
- #2723 PCI Ethernet IOA (support only)
- #2724 PCI 16/4Mbps Token-Ring IOA
- #2745 PCI Node WAN IOA
- #2746 PCI Node Twinaxial IOA
- #2750 PCI ISDN BRI U IOA (support only)
- #2751 PCI ISDN BRI S/T IOA (support only)
- #2761 PCI Integrated Analog Modem (support only)
- #2811 PCI 25Mbps UTP ATM (support only)
- #2812 PCI 45Mbps Coax T3/DS3 ATM (support only)
- #2815 PCI 155Mbps UTP OC3 ATM (support only)
- #2816 PCI 155Mbps MMF ATM (support only)
- #2818 PCI 155Mbps SMF OC3 ATM (support only)
- #2819 PCI 34Mbps Coax E3 ATM
- #2838 PCI 100/10Mbps Ethernet IOA
- #4800 PCI Cryptographic Coprocessor (support only)
- #4802 PCI Cryptographic Coprocessor
- #9723 Base PCI Ethernet IOA (support only)
- #9724 Base PCI Token-Ring IOA (support only)
- #9738 Base PCI 100/10Mbps Ethernet (support only)
The following storage PCI adapters are
supported:
- #2718 PCI Magnetic Media Controller (support only)
- #2729 PCI Magnetic Media Controller (support only)
- #2748 PCI RAID Disk Unit Controller (support only)
Some installation restrictions may apply. Use
the configurator to ensure a valid configuration.
Prerequisites: One PCI controller slot. OS/400
V4R4 with PTF MF22587, or Cumulative (cum) PTF package C9229440, or later.
(#9720) Base PCI WAN/Twinaxial IOA
This combined twinaxial/communication adapter
supports a single communication line. Select one of the following cables for
ECS:
- #0348 V.24/EIA232 20-Ft PCI Cable
- #0349 V.24/EIA232 50-Ft PCI Cable
- #0365 V.24/EIA232 80-Ft PCI Cable
This adapter also supports twinaxial
workstations. See description of the adapter in the workstation controller
section of this document.
PCI slots required: One. Maximum: One.
(#9721) Base PCI Two-Line WAN IOA
(For IBM US, No Longer Available as of October
31, 2000)
This two-line communication adapter supports
ECS and Client Access Console.
Select one of the following cables for ECS.
- #0348 V.24/EIA232 20-Ft PCI Cable
- #0349 V.24/EIA232 50-Ft PCI Cable
- #0365 V.24/EIA232 80-Ft PCI Cable
Select the following cable for Operations
Console.
- #0367 Operations Console PCI Cable
Select the following cable for Client Access
Console.
- #0362 20-Ft Comm Console PCI Cable
PCI card slots required: One. Maximums: One.
(#9745) Base PCI Two-Line WAN IOA
(For IBM US, No Longer Available as of July 2,
2002)
This two line communication adapter supports
ECS and Client Access Console.
Select one of the following cables for ECS.
- #0348 V.24/EIA232 20-Ft PCI Cable
- #0349 V.24/EIA232 50-Ft PCI Cable
- #0365 V.24/EIA232 80-Ft PCI Cable
Select the following cable for Client Access
Console.
- #0362 20-Ft Communications Console PCI Cable
- #0367 Operations Console PCI Cable (Requires V4R3, or later)
PCI card slots required: One. Maximum: One.
Communications Restrictions
If using any of the following communication
functions, restrictions may apply.
- X.25, frame relay, or IPX protocol
- SDLC protocol if used to connect to more than 64 remote sites
- Communications line speeds greater than 64Kbps and up to 2.048Mbps
for the SDLC or frame relay protocols (BSC is always limited to a maximum
of 64Kbps)
- Non-ASYNC communications line speeds greater than 64Kbps and up to
640Kbps for X.25
Facsimile
(#2664) Integrated FAX Adapter
(For IBM US, No Longer Available as of
December 31, 1999)
This feature provides the AS/400 with two
ports capable of transmission and receipt of facsimile data to or from a Group
3 capable FAX machine, another AS/400 with an integrated FAX adapter, or PCs
with appropriately programmed FAX adapters. Feature #2664 consists of a card, a
wrap cable (one per machine), two country unique attachment couplers and
telephone cables and Licensed Internal Code. I/O slots used: One. Maximums: See
model summary table. This feature code may have country specific usage.
Encryption
(#2620) Cryptographic Processor
(For IBM US, No Longer Available as of
December 31, 1999)
This feature is a hardware data encryption
function. This feature consists of a multi-processor I/O processor card. This
feature is only available in the US and Canada. In other countries due to
export restrictions it can only be marketed to banks and to subsidiaries of US
companies. In these countries, and if not a bank or US company's subsidiary,
use feature #2628 (Limited Cryptographic Attachment). Maximum of one on Models
S20, S30, S40.
#2620 requires an export license to be sold
outside the US and Canada.
(#2628) Limited Cryptographic Processor
(For IBM US, No Longer Available as of
December 31, 1999)
This feature is a hardware data encryption
function. This feature is the same as feature #2620 except that it does not
include the encrypt/decrypt function. Due to export restrictions in some non US
Countries the full function encryption attachment feature #2620 cannot be
marketed. The Limited Cryptographic Attachment feature #2628 can be marketed to
any non US firm. Maximum of one on Models S20, S30, S40. #2628 has country
specific usage.
(#4800) PCI Cryptographic Coprocessor
(For IBM US, No Longer Available as of
December 29, 2000)
This feature, coupled with Cryptographic
Service Provider APIs (BOSS option 35), within OS/400 V4R4, or later, provides
a rich level of cryptographic function and secure storage of cryptographic
keys. The level of encryption is determined by no-charge Cryptographic Access
Provider licensed programs from IBM.
Prerequisites: Storage/PCI Expansion Tower
(#5065) on Models S20, S30, and S40, or one PCI slot and PCI LAN/WAN
Workstation IOA (#2824) on Models S10 and S20, or, the base PCI Integrated
Expansion Unit (#9330) on Model S20. Requires OS/400 V4R4 with PTF MF22587, or
Cumulative (cum) PTF package C9229440, or later.
(#4802) PCI Cryptographic Coprocessor
(For IBM US, No Longer Available as of
November 21, 2003)
Provides a rich set of data encryption and
authentication services for applications requiring high security. Cryptographic
keys are stored in a tamper-resistant module on the coprocessor. This feature
is ideally suited for banking and financial applications, however with the
tamper resistant-module the coprocessor can be used to implement other advanced
applications such as electronic postage metering.
Application services provided by the
Coprocessor include:
- Data encryption using Tripe-DES (Data Encryption Standard)
- Digital signature generation/verification using RSA public-key
cryptography
- Data integrity checking using MD5 and SHA-1 secure hash algorithms
- Financial PIN support for ATM (Automatic Teller Machine) networks
- Basic SET (Secure Electronic Transaction) block operations
The PCI
Cryptographic Coprocessor is compatible with IBM's Common Cryptographic
Architecture (CCA). OS/400 Option 35 CCA Cryptographic Service Provider is
required along with one of the AS/400 Cryptographic Access Provider licensed
program products (LPP) -- both Option 35 and the LPP are no-charge.
On plant orders, #4802 is shipped with the
system, but installed at the customer location. It is supported only in the
#5065 Storage/PCI Expansion Tower and the #5066 1.8m I/O Tower.
Prerequisites: OS/400 V4R5, and a high-speed
slot under a base or feature #2824 IOP.
For more information, visit
http://www.ibm.com/security/cryptocards/
Miscellaneous Features
(#0033) IGN/400
#0033 is required for specifying additional
services through IBM Global Network. This feature has country specific usage.
(#0059) Transition Data Link
(For IBM US, No Longer Available as of June
30, 2000)
This feature is used to transfer data between
systems using a twinaxial link. Power cord selection for this feature is based
off of the country code. On upgrades, the power cord selection will be based
off of the install records for the system power cord. No cables are included.
Prerequisite: One #2720, #2722, #6050, #6140, #6180, #9050, #9140, #9280, or
#9720 must be on each system. Maximum: One.
Feature Exchanges
Not applicable.
Back to top
|
|
|
|
Description P/N
----------- ---EIA 232/V.24 Enh (CYGNET-R) 80-Ft Japan 17G2577EIA 232/V.24 Enh (CYGNET-R) 80-Ft Germany 17G2578Async Modem Cable Germany 21F2671Async Modem Cable Japan 21F267440-Ft EIA 232 Terminal/Printer 21F4342100-Ft EIA 232 Terminal/Printer 21F4346EIA 422 Surge Suppressor 21F4403
20-Ft EIA 232 Terminal/Printer 21F450520-FT EIA 232 IWS 21F9965Port Tester Twinax 59X4262Async Modem Cable 69X7016
UTP Matching Adapter 73G9865Yagi Directional Antenna 74F035920-Ft Antenna Cable 74F036050-Ft Antenna Cable 74F0361
Omni-Directional (360 Degree) Antenna 74F0362Hemispherical (180 Degree) Antenna 74F0363Directional (90 Degree) Antenna 74F03647208 Attach 4M Cable 74F0365
3M (9.84-Ft) AUI Ethernet Cable 74F03662.44M (8-Ft) 802.5 Token-Ring Cable 74F03676.1M (20-Ft) CCITT X.21 74F03696.1M (20-Ft) CCITT V.35 cable 74F0370
24.2M (80-Ft) CCITT V.35 cable 74F03716.1M (20-Ft) CCITT V.36/EIA RS449 cable 74F037224.2M (80-Ft) CCITT V.36/EIA RS449 cable 74F037345.7M (150-Ft) CCITT V.36/EIA RS449 cable 74F0374EIA 232/V.24 Enh 20-Ft Standard 74F0382EIA 232/V.24 Enh 20-Ft Japan 74F0383EIA 232/V.24 Enh 20-Ft Germany 74F0384EIA 232/V.24 20-Ft Standard 74F0385
EIA 232/V.24 20-Ft Japan 74F0386EIA 232/V.24 20-Ft Germany 74F0387X.21 20-Ft Standard 74F0388V.35 20-Ft Standard 74F0389
RS 366 (Autocall) 20-Ft Standard 74F0390RS 366 (Autocall) 20-Ft Japan 74F0391EIA 232/V.24 Enh 50-Ft Standard 74F0392EIA 232/V.24 Enh 50-Ft Japan 74F0393EIA 232/V.24 Enh 50-Ft Germany 74F0394EIA 232/V.24 50-Ft Standard 74F0395EIA 232/V.24 50-Ft Japan 74F0396EIA 232/V.24 50-Ft Germany 74F0397X.21 50-Ft Standard 74F0398V.35 50-Ft Standard 74F0399EIA 232/V.24 Enh 80-Ft Standard 74F1825V.35 80-Ft Standard 74F182720M optical cable for connecting towers 81924366M Client Access/400 Cable 87G45642.5M Client Access/400 Cable 87G4565Customer Replacement Parts
Not applicable.
Back to top
|
|
|
|
Not available.
Back to top
|
|
|
|
Data Cartridges (Uncompressed Capacity):
· 2.5GB 1/4-Inch Cartridge Tape Units
Write and read:
- IBM DC9250 (16G8436) 2.5GB
- IBM DC9120 (21F8730) 1.2GB
- IBM DC6525 (21F8597) 525MB
- IBM DC6150 (21F8578) 120MB
- 4GB 1/4-Inch Cartridge Tape Units
Write and read:
- IBM SLR5-4GB (59H3660) 4GB
- IBM DC9250 (16G8436) 2.5GB
- IBM DC9120 (21F8730) 1.2GB
- IBM DC6525 (21F8597) 525MB
- IBM DC6150 (21F8578) 120MB
- 16GB 1/4-Inch Cartridge Tape Units
Write and read:
- IBM MLR1-16GB (59H4175) 16GB
- IBM MLR1-2GB (35L0589) 2GB
Read:
- IBM SLR5-4GB (59H3660) 4GB
- IBM DC9250 (16G8436) 2.5GB
- 25GB 1/4-Inch Cartridge Tape Units
Write and read:
- IBM MLR3-25GB (59H4128) 25GB
- IBM MLR1-16GB (59H4175) 16GB
- IBM MLR1-2GB (35L0589) 2GB
Read:
- IBM SLR5-4GB (59H3660) 4GB
- IBM DC9250 (16G8436) 2.5GB
- 30GB 1/4-Inch Cartridge Tape Units
Write and read:
- IBM SLR60-30GB (19P4209) 30GB
- IBM SLR100-5GB (35L0661) 5GB
- IBM MLR3-25GB (59H4128) 25GB
- IBM MLR1-16GB (59H4175) 16GB
- IBM MLR1-2GB (35L0589) 2GB
Read:
- IBM SLR5-4GB (59H3660) 4GB
- IBM DC9250 (16G8436) 2.5GB
Cleaning
Cartridges and Kits:
The 2.5GB, 4GB,
16GB, and 25GB 1/4-Inch Cartridge Tape Units use the IBM .25-Inch Cleaning
Cartridge (35L0844).
Diskettes
The diskette units use the following IBM, or
equivalent, diskette media:
8-inch diskettes:
IBM Diskette 1
128 Bytes/Sector (2305830)
IBM Diskette 2
256 Bytes/Sector (2736700)
IBM Diskette 2D
256 Bytes/Sector (1766872)
512 Bytes/Sector (1669044)
1024 Bytes/Sector (1669045)
5 1/4-inch
diskettes:
IBM Diskette 2HC
80-Track/Double Sided (6109660)
Sales and
Support:
You can get assistance, answers to
product-related questions, or arrange for a warranty product replacement - with
just one call. To locate your nearest source for ordering IBM Media Products
call the following numbers worldwide:
1-888-IBM-MEDIA (1-888-426-6334) toll free in the United
States and Canada
+1-972-881-0733 in Latin America and Asia/Pacific
+31-433-502-756 in Europe, the Middle East and Africa
+81-3-3808-8486 in Japan
For additional product information and
country-specific phone numbers, visit:
http://www.ibm.com/storage/media
Trademarks
(R), (TM), * Trademark or registered trademark
of International Business Machines Corporation.
** Company, product, or service name may be a
trademark or service mark of others.
Windows is a trademark of Microsoft
Corporation.
© IBM Corporation 2003.